共查询到19条相似文献，搜索用时 125 毫秒
1.
海洋油气混输时,气液两相流与混输立管之间的双向流固耦合作用机理十分复杂.针对柔性立管与气液两相流的流固耦合响应问题,在气液两相循环试验装置中开展了不同流型两相流流动特性及柔性立管振动响应的测试,利用高速摄像非介入测试技术同步捕捉了柔性立管的振动位移与管内的流型演变过程,对比了不同流型气液两相流诱导的立管振动响应特性,通过对比固定和振动立管内的气液两相流动特性,辨析了振动对管内两相流动的影响.结果表明:柔性立管中出现了泡状流、泡状—段塞流、段塞流、段塞—搅拌流和搅拌流五种流型,不同流型的气液两相流诱导立管振动的机理不同,在段塞—搅拌流作用时立管的振动响应最剧烈.与固定立管相比,强烈的振动不同程度地改变了气液两相流的流动特性,振动立管中部分两相流流型转变的临界条件有明显地调整,相对而言,振动对搅拌流和泡状流的影响较小. 相似文献
2.
海底混输管线严重段塞流动的预测与控制 总被引：1，自引：0，他引：1
随着海洋油气田开发向深水海域发展,海底混输管线距离过长,且存在立管系统,容易形成严重段塞流动的现象日益严重.在严重段塞流工况下,管线的流动参数,如压降、段塞长度、段塞频率、持液率都随时间变化,并且表现为周期性变换的压力波动以及间歇出现的液塞.严重段塞流的不稳定性给油气田集输系统的设计及运行管理造成了巨大的困难.本文介绍了海底混输管线中严重段塞流动预测与控制的实验与理论研究进展,同时,对于节流、气举、分离等8类15种控制严重段塞的方法分别进行了评述,旨在为进一步开展海底油气混输管线严重段塞流动的研究提供借鉴,为工程实践提供参考. 相似文献
3.
破波带内外都有质量输移流存在，其对破波带内污染物输移有怎样的影响，需要进一步深入研究。本文基于实验以及考虑质量输移流的对流扩散数学模型研究了平直斜坡上破波带内质量输移流对污染物输移影响。数学模型包括波浪模型、近岸流模型以及对流扩散模型。首先建立了破波带内污染物输移数学模型，其中波浪场基于波能守恒方程来计算，波导流场基于Longuet-Higgins提出的辐射应力模拟，污染物对流扩散方程中考虑了质量输移流的影响，并利用算例验证该数学模型。其次简要介绍了平直斜坡上破波带内污染物输移实验，并分析了污染物输移特性。连续投放污染物会形成污染带，本文分析了两种波况下不同时刻污染带与岸线夹角的变化，以及污染物在垂直岸线和沿岸线方向的输移速度，结果表明对两种波况来说在初始10-40s污染团向岸线方向输移速度分别约为0.05m/s、0.017m/s，之后速度分别减小为0.001m/s、0.011m/s。数值模拟结果与实验结果比较表明：考虑质量输移流的模拟结果与实验更为吻合。因而，通过实验以及数模研究表明破波带内质量输移流对破波带内污染物在垂直岸线方向的输移有重要影响，而对沿岸方向的输移则影响较小。 相似文献
4.
5.
近壁圆柱绕流水动力特性数值模拟与实验研究 总被引：3，自引：0，他引：3
通过数值模拟和物理模型实验,对距壁面一定高度的圆柱绕流水动力特性进行了研究。数值模拟采用有限体积法对标准k-ε模式方程进行离散,采用SIMPLE算法进行求解,模拟绕流流场。在物理模型实验中,将PVC圆管制作的实验模型安放在水槽内,在圆管的跨中沿表面周向均匀布置水下压力传感器,用于测量绕流圆柱体表面动水压力分布。通过改变Re数和间隙比来分析它们对近壁圆柱绕流水动力特性的影响。基于数值流动显示技术,给出了近壁绕流流场的尾流流态分析。通过数值结果与实验结果的对比,对近壁绕流圆柱体的升力系数及其表面动水压力分布进行了研究,对比结果显示了较好的一致性。 相似文献
6.
沙坝海岸沿岸流速度剖面特征研究 总被引：1，自引：0，他引：1
通过对两个坡度沙坝地形沿岸流实验测量和基于能量方程的沿岸流数值模拟,研究了沙坝海岸平均沿岸流速度剖面的双峰剖面特征,重点分析了第二个峰值的特征和两峰值的比值。综合考虑入射波高、入射波类型和坡度对波生沿岸流垂直岸线速度剖面的影响。结果表明,平均沿岸流速度剖面出现双峰剖面特征:第一峰值发生在沙坝向岸侧面的中部,第二个峰值发生在靠近岸线处;同一坡度情况两个峰值的位置和比值,不受入射波类型、入射波高的影响。数值模型中包括了侧混、底摩擦和水滚等因素,其数值模拟结果和实验值拟合较好,并讨论了有无侧混和水滚对速度剖面的影响。 相似文献
7.
8.
沿岸流流速垂向分布的实验研究 总被引：1，自引：0，他引：1
进行了沿岸流模型实验,测量沿岸流流速的垂向分布.采用Faria等(1996)的方法对实验结果进行了分析,将水深分为上层和下层两部分:下层采用对数分布来表达沿岸流的垂向分布;上层考虑了波浪引起的自由表面的波动,使流速分布包括了修正的对数分布和质量输移速度两部分.对实验结果得到的相对粗糙度与sleath(1991)的经验公式结果进行了对比,也对摩阻流速结果与已有经验公式计算结果的进行了对比. 相似文献
9.
电磁分离是处理海洋船舶油污水的一种新方法。为了明晰海洋船舶油污水电磁分离过程，获得油水分离特性，本文采用二维数值模拟和欧拉多相流模型，研究了电磁场作用下油水混合流的流场分布及油相体积分数的变化规律和影响因素。研究结果表明：1）分离通道有效段内，向下的电磁力（洛伦兹力）使海水向下流动，电磁分离力使油珠向上运动；2）分离通道出口上部油相的体积分数随电流密度、磁场强度以及油珠直径的增大而增大，随油污海水入口流速的增大而减小。研究结果为油水混合流电磁分离装置的设计提供了有益的指导。 相似文献
10.
CW系统是交通部天津水运工程科学研究所最近研制成功的一个多功能全过程综合性数值模拟系统。目前,此系统包含以下几个方面的内容:1.风浪预报;2.波浪折射和浅水区波高计算;3.潮流模拟;4.风吹流模拟;5.波浪、潮流综合作用下的波流场模拟;6.悬沙输移、扩散运动;7.浮泥流动;8.海底演变。 相似文献
11.
Experimental Study and Simulation Principles of An Oil-Gas Multiphase Transportation System 总被引：3，自引：0，他引：3
WU Yingxiang 《中国海洋工程》2000,14(1):33-44
—Presented is an experimental study on the performance of an oil-gas multiphase transporta-tion system,especially on the multiphase flow patterns,multiphase pumping and multiphase metering ofthe system.A dynamic simulation analysis is conducted to deduce simulation parameters of the systemand similarity criteria under simplified conditions are obtained.The reliability and feasibility of two-phaseflow experiment with oil and natural gas simulated by water and air are discussed by using the similaritycriteria. 相似文献
12.
13.
海底管道是海洋油气输送的重要纽带。为解决海底管道面临的水合物生成和堵塞问题,文章结合海底多相流管道水合物生成的数学模型,采用OLGA对海底管道不同含水率、气油比和流量下水合物的生成情况进行数值模拟。研究结果表明：在某海底管道的工艺参数条件下,水合物生成风险随着含水率和流量的增大而降低,随着气油比的增大而增加;海底水平管路和立管都有可能生成水合物,尤其立管常是水合物最大生成量的位置;模拟结果可为海底管道水合物的防治和保障海底管道的安全运行提供参考。 相似文献
14.
For the growth and departure of bubbles from an orifice, a free energy lattice Boltzmann model is adopted to deal with this complex multiphase flow phenomenon. A virtual layer is set at the boundary of the flow domain to deal with the no-slip boundary condition. Effects of the viscosity, surface tension, gas inertial force and buoyancy on the characteristics of bubbles when they grow and departure from an orifice in quiescent liquid are studied. The releasing period and departure diameter of the bubble are influenced by the residual gas at the orifice, and the interaction between bubbles is taken into consideration. The relations between the releasing period or departure diameter and the gravity acceleration show fair agreements with previous numerical and theoretical results. And the influence of the gas outflow velocity on bubble formation is discussed as well. For the bubbles growing in cross-flow field, effects of the cross-flow speed and the gas outflow velocity on the bubble formation are discussed, which is related to the application in ship resistance reduction. And optimal choice of the ship speed and gas outflow velocity is studied. Cases in this paper also prove that this high density ratio LBM model has its flexibility and effectiveness on multiphase flow simulations. 相似文献
15.
Natural gas hydrate, as a potential energy resource, deposits in permafrost and marine sediment with large quantities. The current exploitation methods include depressurization, thermal stimulation, and inhibitor injection. However, many issues have to be resolved before the commercial production. In the present study, a 2-D axisymmetric simulator for gas production from hydrate reservoirs is developed. The simulator includes equations of conductive and convective heat transfer, kinetic of hydrate decomposition, and multiphase flow. These equations are discretized based on the finite difference method and are solved with the fully implicit simultaneous solution method. The process of laboratory-scale hydrate decomposition by depressurization is simulated. For different surrounding temperatures and outlet pressures, time evolutions of gas and water generations during hydrate dissociation are evaluated, and variations of temperature, pressure, and multiphase fluid flow conditions are analyzed. The results suggest that the rate of heat transfer plays an important role in the process. Furthermore, high surrounding temperature and low outlet valve pressure may increase the rate of hydrate dissociation with insignificant impact on final cumulative gas volume. 相似文献
16.
A static experimental system based on the background of the underwater gun firing process is designed to simulate the expansion of conical-distributed multiple gas jets in a water-filled vessel. The gas is generated from the gunpowder combustion and injected into water through five orifices on a mock bullet. A high-speed digital camera is taken in experiment to record such expansion and the Euler-Euler multiphase model is utilized in simulation to describe the gas-liquid flow. Results show that the contraction of Taylor cavity in liquid and the gas-liquid entrainment both affect the shock structure in gas. The expansion zone near the orifice shrinks and the gas speed downs when the central gas jet has a contraction, but lateral jets have no contractions due to the obstruction from the wall. The contraction has a greater impact on the shock structure than the gas-liquid entrainment and occurs earlier under a higher injection pressure. 相似文献
17.
Laboratory experiments on conically shaped oil collectors beneath a marine riser are described. The collection concept involves oil, water and gas entering the collector and being driven into a separating sytem by gas-lift. A parametric study involving various collector shapes, heights above the wellhead, and gas, oil and water flow rates was carried out. The important dimensionless variables were identified and quantified with the conclusion that effective collection is possible if the collector height is sufficiently small and the ratio of water pumped to gas flow is sufficiently large. Increased collector heights can be accommodated at the expense of requiring increased water flows by use of larger diameter risers. The amount of gas required for most efficient oil collection is found to be much less than is expected to come from most blowouts when a single collector and riser system is used. This difficulty can be greatly diminished by the use of a specially designed gas-separating collector which passes most of the gas to the surface through a riser separate from the one which carries the liquids. 相似文献
18.
The natural gas hydrate resource is tremendous.How to utilize the gas from hydrates safely is researchers' concern.In this paper,a one-dimensional model is developed to simulate the hydrate dissociation by depressurization in hydrate-bearing porous medium.This model can be used to explain the effects of the flow of multiphase fluids,the endothermic process of hydrate dissociation,the variation of permeability,the convection and conduction on the hydrate dissociation.Numerical results show that the hydrate dissociation can be divided into three stages:a rapid dissociation stage mainly governed by hydrate dissociation kinetics after an initially slow dissociation stage governed mainly by flow,and finally a slow dissociation stage.Moreover,a numerical approach of sensitivity analysis of physical parameters is proposed,with which the quantitative effect of all the parameters on hydrate dissociation can be evaluated conveniently. 相似文献
19.
油田水动力系统与油气藏的形成 总被引：6，自引：0，他引：6
油田水中存在“沉积承压水”和“地表渗入水”两个相对独立而又相互作用的水动力系统,前者由上覆地层重量所引起的地静压力以及地静压力等引起的异常孔隙流体压力所形成,具有内循环承压式水交替特征,后者为大气降水和地表水向储集层的渗入而形成,以外循环渗入或水交替为特征。这两大系统（尤其是前者）的作用在很大程度上控制了含油气盆地中油气的运移、聚集和保存,油气聚集区主要位于水文地质带中的交管阻滞一停滞带内,沉积交替强度的低值区是油气富集区,沉积水的离心流使凹陷中的油气围绕凹陷中心呈带状分布。 相似文献