共查询到20条相似文献，搜索用时 453 毫秒
1.
沙坝海岸沿岸流速度剖面特征研究 总被引：1，自引：0，他引：1
通过对两个坡度沙坝地形沿岸流实验测量和基于能量方程的沿岸流数值模拟,研究了沙坝海岸平均沿岸流速度剖面的双峰剖面特征,重点分析了第二个峰值的特征和两峰值的比值。综合考虑入射波高、入射波类型和坡度对波生沿岸流垂直岸线速度剖面的影响。结果表明,平均沿岸流速度剖面出现双峰剖面特征:第一峰值发生在沙坝向岸侧面的中部,第二个峰值发生在靠近岸线处;同一坡度情况两个峰值的位置和比值,不受入射波类型、入射波高的影响。数值模型中包括了侧混、底摩擦和水滚等因素,其数值模拟结果和实验值拟合较好,并讨论了有无侧混和水滚对速度剖面的影响。 相似文献
2.
Longshore currents of regular waves on different beaches 总被引：1，自引：0，他引：1
The experiment and numerical computations of longshore currents produced by regularwaves on the two beaches with the slopes of 1:100 and 1:40 are made. The cross-shore distributions of longshore current velocities and wave heights are given and the influences of wave heights, wave periods and beach slopes on the longshore currents are discussed. The discussion is also made for the influences of different eddy viscosity coefficients on the numerical results of longshore current velocities. 相似文献
3.
Longshore Currents of Random Waves on Different Plane Beaches 总被引：8，自引：0，他引：8
1 .IntroductionWhenwavespropagateobliquelytotheshorelineandbreak ,ameancurrentisgeneratedflowingparalleltothecoast.Thegenerationoflongshorecurrentscanbeexplainedasfollows .Withbreakingwaveheightdecreasing ,themomentumofwavemotionwillchangecorrespondingly .Accordingtothemomentumconservationtheory ,thechangesofthemomentumwillbeaccompaniedwithadditionalforcesactingonfluid .Longuet Higgins ( 1 970 )usedtheconceptofradiationstresstodescribetheaboveadditionalforceactingonfluidduetothechangeofwavemo… 相似文献
4.
Numerical study of wave and longshore current interaction 总被引：1，自引：0，他引：1
Wave and longshore current interaction was examined based on the numerical models.In these models,water waves in the presence of longshore currents were modeled by parabolic mild slope equation,and wave breaking induced longshore currents were modeled by shallow water equation.Water wave provided the radiation stress gradients to drive current.Wave and longshore current interactions were considered by cycling the wave and longshore current models to a steady state.The experiments for regular and irregular breaking wave induced longshore currents by Hamilton and Ebersole（2001） and Reniers and Battjes（1997） were simulated.The numerical results indicate that the present models are effective for simulating the interaction of wave and breaking wave induced longshore currents,and the numerically simulated longshore current at wave breaking point considering wave and longshore current interaction show some disagreement with those neglecting the wave-current interaction,and the breaking wave induced longshore current effect on wave transformation is not obvious. 相似文献
5.
6.
7.
《Coastal Engineering》2001,42(3):199-218
A large-scale laboratory facility for conducting research on surf-zone sediment transport processes has been constructed at the U.S. Army Engineer Research and Development Center. Successful execution of sediment transport experiments, which attempt to replicate some of the important coastal processes found on long straight beaches, requires a method for establishing the proper longshore current. An active pumping and recirculation system comprised of 20 independent pumps and pipelines is used to control the cross-shore distribution of the mean longshore current. Pumping rates are adjusted in an iterative manner to converge toward the proper settings, based on measurements along the beach. Two recirculation criteria proposed by Visser [Coastal Eng. 15 (1991) 563] were also used, and they provided additional evidence that the proper total longshore flow rate in the surf zone was obtained. The success of the external recirculation system and its operational procedure, and the degree of longshore uniformity achieved along the beach, are the subjects of this paper. To evaluate the performance of the recirculation system, and as a precursor to sediment transport experiments, two comprehensive test series were conducted on a concrete beach with straight and parallel contours (1:30 slope), one using regular waves and the other using irregular waves. In the regular wave case, the wave period was 2.5 s and the average wave height at breaking was approximately 0.25 m. In the irregular wave case, the peak wave period was 2.5 s and the significant breaking wave height was approximately 0.21 m. The longshore current recirculation system proved to be very effective in establishing uniform mean longshore currents along the beach in both cases. This facility and the data presented here are unique for the following reasons: (1) the high cross-shore resolution of the recirculation system and the ease with which changes can be made to the longshore current distribution, (2) the degree of longshore uniformity achieved as a percentage of the length of the basin (even near the downdrift boundary), (3) the scale of the wave conditions generated, and (4) the relatively gentle beach slope used in the experiments (compared to previous laboratory studies of the longshore current). Measured data are provided in an appendix for use in theoretical studies and numerical model development and validation. 相似文献
8.
本文采用圆柱体阵列来模拟珊瑚礁面的大糙率,通过波浪水槽实验研究礁面糙率对孤立波传播变形及岸滩爬高的影响。结果表明,粗糙礁面的存在显著削弱了礁坪上孤立波的首峰和礁后岸滩反射造成的次峰,同时降低了波浪在珊瑚礁面的传播速度;垂直于岸线方向沿礁相对波高随着入射波增大而减小,随着礁坪水深的增大而增大,粗糙礁面上波高沿礁的衰减更为显著;礁前斜坡的无量纲反射波高随无量纲入射波高的变化与礁坪水深有关,当入射波高足够大时其趋于常值,粗糙礁面略微增大了礁前斜坡的反射;无量纲透射波高和岸滩爬高随着无量纲入射波高的增大而减小,特别是礁坪水深较大时更为显著,粗糙礁面时的无量纲岸滩爬高相对于光滑礁面平均减小46%;通过回归分析得出了同时适合于光滑和粗糙礁面的预测孤立波岸滩爬高的经验关系式。 相似文献
9.
进行了在规则波作用下破波带内水平混合系数测量的物理模型实验。通过在沿岸流流场中投放墨水点源和采用CCD摄像机摄像,测量了点源扩散过程。利用水深平均二维扩散方程近似解析解得到了由实验结果计算混合系数的方法。实验结果表明:扩散系数仅依赖于当地水深,与波浪参数(周期和波高)无关。沿岸流沿水深变化产生的离散作用导致顺流方向(纵向)混合系数远大于横流方向(横向)混合系数。横流方向混合系数中由波浪产生的扩散系数占总扩散系数约40%,其余为波浪破碎引起的湍流产生的扩散系数。 相似文献
10.
Hsien-KuoCHANG Jin-ChengLIOU 《中国海洋工程》2004,18(3):371-380
This investigation examines long wave reflection and transmission induced by a sloping step. Bellman and Kalaba‘s (1959) invariant imbeddlng is introduced to find wave reflection. An alternative method matching both the surface elevation and its surface slope of each region at the junction is applied to the determination of wave reflection and transmission.The proposed methods are compared with the accurate numerical results of Porter and Porter (2000) and those of Mei (1983) for a vertical step. The wave reflection obtained for a mildly sloping step differs significantly from the result of Mei. The wave reflection is found to fluctuate owing to wave trapping for the ntild sloping step. The height and the face slope of the step are important for determining wave reflection and transmission coefficients. 相似文献
11.
A probabilistic model (
-model) was developed to describe the propagation and transformation of individual waves (wave by wave approach). The individual waves shoal until an empirical criterion for breaking is satisfied. Wave height decay after breaking is modelled by using an energy dissipation method. Wave-induced set-up and set-down and breaking-associated longshore currents are also modelled. Laboratory and field data were used to calibrate and verify the model. The model was calibrated by adjusting the wave breaking coefficient (as a function of local wave steepness and bottom slope) to obtain optimum agreement between measured and computed wave height. Four tests carried out in the large Delta flume of Delft Hydraulics were considered. Generally, the measured H1/3-wave heights are reasonably well represented by the model in all zones from deep water to the shallow surf zone. The fraction of breaking waves was reasonably well represented by the model in the upsloping zones of the bottom profile. Verification of the model results with respect to wave-induced longshore current velocities was not extensive, because of a lack of data. In case of a barred profile the measured longshore velocities showed a relatively uniform distribution in the (trough) zone between the bar crest and the shoreline, which could to some extent be modelled by including space-averaging of the radiation force gradient, horizontal mixing and longshore water surface gradients related to variations in set-up. In case of a monotonically upsloping profile the cross-shore distribution of the longshore current velocities is reasonably well represented. 相似文献
12.
通过波浪水槽实验,开展不同类型波浪作用下的沙质岸滩演化规律研究工作。本次实验研究不考虑比尺,采用1:10与1:20组成的复合沙质斜坡对岸滩进行概化,选取规则波和椭圆余弦波两种典型波浪作用,对波浪的传播、变形和破碎、上爬、回落过程以及波浪作用前后沙质岸滩床面地形进行了观测,探讨波浪作用下沙质岸滩剖面演化规律。本文实验工况中,规则波作用下,岸滩剖面呈现出沙坝剖面和滩肩剖面,椭圆余弦波作用下的岸滩剖面均呈滩肩形态,发现岸滩剖面形态不仅与波浪作用类型、强度、周期等因素相关,还与波浪破碎的强度等因素有关。通过对实验过程中现象的进行观察和分析,引入了卷破波水舌冲击角的概念。对波浪卷破破碎后形成的水流挟沙运动与岸滩剖面形态的关系进行定性分析,对水舌冲击角与Irribarren参数之间的关系进行定量分析,基于Irribarren参数与岸滩剖面形态的关系初步建立了波浪作用下沙质岸滩剖面形态判别关系式。通过本文实验结果和前人实验结果对趋势线进行拟合,求得其判别系数,判别式能够较好地划分淤积型岸滩、侵蚀型岸滩及过渡型岸滩三种岸滩形态。 相似文献
13.
Numerical Simulation of Spatial Lag Between Wave Breaking Point and Location of Maximum Wave-Induced Current 总被引：2，自引：0，他引：2
A quasi three-dimensional numerical model of wave-driven coastal currents with the effects of surface rollers is developed for the study of the spatial lag between the location of the maximum wave-induced current and the wave breaking point.The governing equations are derived from Navier-Stokes equations and solved by the hybrid method combining the fractional step finite different method in the horizontal plane with a Galerkin finite element method in the vertical direction.The surface rollers effects are considered through incorporating the creation and evolution of the roller area into the free surface shear stress.An energy equation facilitates the computation process which transfers the wave breaking energy dissipation to the surface roller energy.The wave driver model is a phase-averaged wave model based on the wave action balance equation.Two sets of laboratory experiments producing breaking waves that generated longshore currents on a planar beach are used to evaluate the model's performance.The present wave-driven coastal current model with the roller effect in the surface shear stress term can produce satisfactory results by increasing the wave-induced nearshore current velocity inside the surf zone and shifting the location of the maximum longshore current velocity landward. 相似文献
14.
《Ocean Engineering》2004,31(11-12):1351-1375
Sorting of sediment on a beach under wave action takes several forms. Stratified layers of finer and coarser sediment, which depend on wave climate, grain size and beach slope are formed. This complex problem can be simplified by defining the cross-shore and longshore sorting according to the angle between the breaking wave and the coast. In the present study, longshore distribution of sediment as well as corresponding beach profiles was measured in a wave basin. Three-dimensional hydraulic model experiments were performed with regular waves. Eighteen sets of experiments performed in longshore sorting mechanism using two different sand beds. The sorting of the bed material and the formation of armour coats along the beach were defined by grain size distributions and dimensionless parameters for sandy beaches.The rate of sediment transport with grain size sorting was measured in a wave basin. A method introduced sorting process was presented in this study. The sediment rate based on sorting mechanism was also discussed with known methods. It has been found that the non-uniformity of the grain size and hence sorting of the beaches play a very important role in the sand transport due to wave motion in a similar way to the case of steady flow in alluvial channels. 相似文献
15.
A Numerical Investigation of the Reduction of Solitary Wave Runup by A Row of Vertical Slotted Piles
To improve the current understanding of the reduction of tsunami-like solitary wave runup by the pile breakwater on a sloping beach, we developed a 3D numerical wave tank based on the CFD tool OpenFOAM in this study. The Navier Stokes equations were applied to solve the two-phase incompressible flow, combined with an LES model to solve the turbulence and a VOF method to capture the free surface. The adopted model was firstly validated with existing empirical formulas for solitary wave runup on the slope without the pile structure. It is then validated using our new laboratory observations of the free surface elevation, the velocity and the pressure around a row of vertical slotted piles subjected to solitary waves, as well as the wave runup on the slope behind the piles. Subsequently, a set of numerical simulations were implemented to analyze the wave reflection, the wave transmission, and the shoreline runup with various offshore wave heights, offshore water depths, adjacent pile spaces and beach slopes. Finally, an improved empirical equation accounting for the maximum wave runup on the slope was proposed by taking the presence of the pile breakwater into consideration. 相似文献
16.
17.
The morphology, bedforms and hydrodynamics of Merlimont beach, in northern France, characterised by intertidal bars and a spring tidal range of 8.3 m, were surveyed over a 10-day experiment with variable wave conditions that included a 2-day storm with significant wave heights of up to 2.8 m. The beach exhibited two pronounced bar-trough systems located between the mean sea level and low neap tide level. Waves showed a cross-shore depth modulation, attaining maximum heights at high tide. The mean current was characterised dominantly by strong tide-induced longshore flows significantly reinforced by wind forcing during the storm, and by weaker, dominantly offshore, wave-induced flows. Vertical tidal water-level variations (tidal excursion rates) showed a bimodal distribution with a peak towards the mid-tide position and low rates near low and high water. The two bar-trough systems in the mid-tide zone remained stable in position during the experiment but showed significant local change. The absence of bar migration in spite of the relatively energetic context of this beach reflects high macro-scale bar morphological lag due to a combination of the large vertical tidal excursion rates in the mid-tide zone, the cross-shore wave structure, and the pronounced dual bar-trough system. The profile exhibited a highly variable pattern of local morphological change that showed poor correlation with wave energy levels and tidal excursion rates. Profile change reflected marked local morphodynamic feedback effects due mainly to breaks in slope associated with the bar-trough topography and with trough activity. Change was as important during low wave-energy conditions as during the storm. Strong flows in the entrenched troughs hindered cross-shore bar mobility while inducing longshore migration of medium-sized bedforms that contributed in generating short-term profile change. The large size and location of the two pronounced bars in the mid-tide zone of the beach are tentatively attributed respectively to the relatively high wave-energy levels affecting Merlimont beach, and to the cross-shore increase in wave height hinged on tidal modulation of water depths. These two large quasi-permanent bars probably originated as essentially breakpoint bars and are different from a small bar formed by swash and surf processes in the course of the experiment at the mean high water neap tide level, which is characterised by a certain degree of tidal stationarity and larger high-tide waves. 相似文献
18.
19.
A laboratory experiment on alongshore currents was conducted for two plane beaches, with gradients 1:40 and 1:100, to investigate the instability of alongshore currents. Complicated and strongly unstable alongshore current motions were observed. In order to clearly examine the spatial and temporal variations of the shear instability of the currents, digital images from a charge-coupled device (CCD) recorded the deformations of dye batches released in the surf zone. Some essential characteristics of the shear instability were obtained from analyses of images showing the temporal variation of the dye patches.A high-resolution spectral analysis technique (the maximum entropy method, or MEM) was used to analyze the dominant frequency of the observed oscillation, along with the trigonometric regression method for determining the variations of the oscillation strength in the cross-shore direction. The propagation speed of the dye patch was obtained by tracking the movement over time of fixed locations in the dye patch, such as its peak, in the longshore direction. This data was then fitted linearly.Alongshore and cross-shore velocity time series acquired from sensors showed clearly that large-amplitude, long-period (about 50 s or 100 s) oscillations were present for all sensors deployed in the cross-shore direction under regular and irregular wave conditions. The analysis found that the maximum shear wave amplitude was approximately one-sixth of the maximum for the mean alongshore current, and occurred approximately at the position of the maximum of the mean alongshore current for irregular waves. The spatial structure of the shear waves was studied by analyzing collected images of the dye patches. The phase velocity of the meandering movements was obtained by measuring the magnitude of the oscillations of the dye patches in the alongshore direction with respect to time. The results suggest that the propagation speed of the shear instability was approximately one-half to three-quarters of the maximum mean longshore current for both regular and irregular waves.Linear instability analysis theory was applied to the characteristics of alongshore current instability, which suggested that there are two instability modes related to the observed oscillations: the frontshear mode observed for the 1:100 slope, and the backshear mode observed for the 1:40 slope. Theoretical analyses agreed with the experimental results in both cases. The velocity profile of the mean longshore current was found to affect the instability mode significantly, leading to further investigations on the influence of the velocity profiles and to provide support for the above conclusions. 相似文献
20.
A nearshore wave breaking model 总被引：4，自引：0，他引：4
ＡｎｅａｒｓｈｏｒｅｗａｖｅｂｒｅａｋｉｎｇｍｏｄｅｌＬｉＳｈａｏｗｕ,ＷａｎｇＳｈａｎｇｙｉ,ＴｏｍｏｙａＳｈｉｂａｙａｍａ（ＲｅｃｅｉｕｅｄＯｃｔｏｂｅｒ８,１９９６;ａｃｃｅｐｔｅｄＦｅｂｒｕａｒｙ２６,１９９７）Ａｂｓｔｒａｃｔ－Ａｗａｖｅｂ... 相似文献