共查询到20条相似文献，搜索用时 31 毫秒
1.
— In this paper, we provide a 5-parameter stacking formula to transform 2-D prestack data into a particular common-offset section. This requires the knowledge of the near-surface velocity only and it is expected that ray theory holds to describe primary reflections. The earth model can be arbitrarily inhomogeneous. The new stacking approach can be viewed as a generalization of the 3-parameter common-reflection-surface (CRS) stack, by which 2-D multicoverage data are stacked into a simulated zero-offset section. The new 5-parameter formula can handle P-P, P-S and S-S reflections. 相似文献
2.
共反射面元（Common Reflection Surface）叠加是一种独立于宏观速度模型的零偏移距剖面成像方法,传统的CRS叠加实现是以数据驱动的方式对属性参数进行自动搜索并对其进行优化合成相应的CRS叠加算子,通过该算子进行叠加能够得到信噪比和连续性更高的零偏移距剖面.但是数据驱动的实现方式带来了不可避免的“倾角歧视现象”,它造成了弱有效反射信号损失和运动学特征失真的问题.本文提出的倾角分解CRS叠加方法成功解决了上述问题,使CRS叠加方法更具实用价值. 相似文献
3.
Kai Yang Bao‐shu Chen Xiao‐jiang Wang Xiao‐chun Yang Jun‐rong Liu 《Geophysical Prospecting》2012,60(2):255-269
In the application of a conventional common‐reflection‐surface (CRS) stack, it is well‐known that only one optimum stacking operator is determined for each zero‐offset sample to be simulated. As a result, the conflicting dip situations are not taken into account and only the most prominent event contributes to any a particular stack sample. In this paper, we name this phenomenon caused by conflicting dip problems as ‘dip discrimination phenomenon’. This phenomenon is not welcome because it not only leads to the loss of weak reflections and tips of diffractions in the final zero‐offset‐CRS stacked section but also to a deteriorated quality in subsequent migration. The common‐reflection‐surface stack with the output imaging scheme (CRS‐OIS) is a novel technique to implement a CRS stack based on a unified Kirchhoff imaging approach. As far as dealing with conflicting dip problems is concerned, the CRS‐OIS is a better option than a conventional CRS stack. However, we think the CRS‐OIS can do more in this aspect. In this paper, we propose a workflow to handle the dip discrimination phenomenon based on a cascaded implementation of prestack time migration, CRS‐OIS and prestack time demigration. Firstly, a common offset prestack time migration is implemented. Then, a CRS‐OIS is applied to the time‐migrated common offset gather. Afterwards, a prestack time demigration is performed to reconstruct each unmigrated common offset gather with its reflections being greatly enhanced and diffractions being well preserved. Compared with existing techniques dealing with conflicting dip problems, the technique presented in this paper preserves most of the diffractions and accounts for reflections from all possible dips properly. More importantly, both the post‐stacked data set and prestacked data set can be of much better quality after the implementation of the presented scheme. It serves as a promising alternative to other techniques except that it cannot provide the typical CRS wavefield attributes. The numerical tests on a synthetic Marmousi data set and a real 2D marine data set demonstrated its effectiveness and robustness. 相似文献
4.
Bergler Steffen Duveneck Eric Höcht German Zhang Yonghai Hubral Peter 《Studia Geophysica et Geodaetica》2002,46(2):165-175
The finite-offset (FO) common-reflection-surface (CRS) stack has been shown to be able to handle not only P-P or S-S but also arbitrarily converted reflections. It can provide different stack sections such as common-offset (CO), common-midpoint (CMP) and common-shot (CS) sections with significantly increased signal-to-noise ratio from the multi-coverage pre-stack seismic data in a data-driven way. It is our purpose in this paper to demonstrate the performance of the FO CRS stack on data involving converted waves in inhomogeneous layered media. In order to do this we apply the FO CRS stack for common-offset to a synthetic seismic data set involving P-P as well as P-S converted primary reflections. We show that the FO CRS stack yields convincing improvement of the image quality in the presence of noisy data and successfully extracts kinematic wavefield attributes useful for further analyses. The extracted emergence angle information is used to achieve a complete separation of the wavefield into its P-P and P-S wave components, given the FO CRS stacked horizontal and vertical component sections. 相似文献
5.
Seyyed Ali Fa’al Rastegar Abdolrahim Javaherian Naser Keshavarz Farajkhah Mehrdad Soleimani Monfared Abbas Zarei 《应用地球物理》2016,13(2):353-363
We modified the common-offset–common-reflection-surface (COCRS) method to attenuate ground roll, the coherent noise typically generated by a low-velocity, low-frequency, and high-amplitude Rayleigh wave. The COCRS operator is based on hyperbolas, thus it fits events with hyperbolic traveltimes such as reflection events in prestack data. Conversely, ground roll is linear in the common-midpoint (CMP) and common-shot gathers and can be distinguished and attenuated by the COCRS operator. Thus, we search for the dip and curvature of the reflections in the common-shot gathers prior to the common-offset section. Because it is desirable to minimize the damage to the reflection amplitudes, we only stack the multicoverage data in the ground-roll areas. Searching the CS gathers before the CO section is another modification of the conventional COCRS stacking. We tested the proposed method using synthetic and real data sets from western Iran. The results of the ground-roll attenuation with the proposed method were compared with results of the f–k filtering and conventional COCRS stacking after f–k filtering. The results show that the proposed method attenuates the aliased and nonaliased ground roll better than the f–k filtering and conventional CRS stacking. However, the computation time was higher than other common methods such as f–k filtering. 相似文献
6.
CRS MZO方法是一种以输出道成像方式合成零偏移距剖面的共反射面元（Common Reflection Surface）叠加算法,它以完全不同的方式实现了CRS叠加.理论I已经对CRS MZO叠加方法的理论进行了详细介绍,本文进一步将CRS MZO方法用于对实际资料的处理.处理结果表明CRS MZO方法有效地改善了零偏移距剖面的成像质量,体现了CRS叠加理论的特点.在结合倾角分解策略消除了倾角歧视现象后,倾角分解CRS MZO方法完全能够用于处理实际数据,为得到高质量的零偏移距剖面提供了一个新的手段. 相似文献
7.
Common reflection surface stack using dip decomposition for rugged surface topography 总被引：1，自引：0，他引：1
We present an extension of the Common Reflection Surface （CRS） stack that provides support for an arbitrary top surface topography. CRS stacking can be applied to the original prestack data without the need for any elevation statics. The CRS-stacked zero- offset section can be corrected （redatumed） to a given planar level by kinematic wave field attributes. The seismic processing results indicate that the CRS stacked section for rugged surface topography is better than the conventional stacked section for S/N ratio and better continuity of reflection events. Considering the multiple paths of zero-offset rays, the method deals with reflection information coming from different dips and performs the stack using the method of dip decomposition, which improves the kinematic and dynamic character of CRS stacked sections. 相似文献
8.
共反射面元（Common Reflection Surface）叠加是一种不依赖于宏观速度模型的零炮检距剖面成像方法,实现共反射面元叠加依赖于3个波场属性参数的确定,它们分别是零偏移距射线的出射角α、Normal波和Normal Incident Point波出射到地表的波前曲率半径RN和RNIP. 在CRS叠加的理论基础上,本文阐述如何在实际数据上实现CRS叠加. 首先,通过简洁的一维相关性分析在常规叠加剖面上找到对应该共反射面元的一组初始波场属性参数(α,RN,RNIP),然后在对应的叠前数据上应用最优化算法对这组参数进行优化处理,相比初始属性参数,优化后的属性参数能够更好地聚集来自地下反射层的能量,最后应用优化后的属性参数实现最优CRS叠加. 相似文献
9.
J.F.B. Bolte 《Geophysical Prospecting》2004,52(6):523-534
The common focal point (CFP) method and the common reflection surface (CRS) stack method are compared. The CRS method is a fast, highly automated procedure that provides high S/N ratio simulation of zero‐offset (ZO) images by combining, per image point, the reflection energy of an arc segment that is tangential to the reflector. It uses smooth parametrized two‐way stacking operators, based on a data‐driven triplet of attributes in 2D (eight parameters in 3D). As a spin‐off, the attributes can be used for several applications, such as the determination of the geometrical spreading factor, multiple prediction, and tomographic inversion into a smooth background velocity model. The CFP method aims at decomposing two‐way seismic reflection data into two full‐aperture one‐way propagation operators. By applying an iterative updating procedure in a half‐migrated domain, it provides non‐smooth focusing operators for prestack imaging using only the energy from one focal point at the reflector. The data‐driven operators inhibit all propagation effects of the overburden. The CFP method provides several spin‐offs, amongst which is the CFP matrix related to one focal point, which displays the reflection amplitudes as measured at the surface for each source–receiver pair. The CFP matrix can be used to determine the specular reflection source–receiver pairs and the Fresnel zone at the surface for reflection in one single focal point. Other spin‐offs are the prediction of internal multiples, the determination of reflectivity effects, velocity‐independent redatuming and tomographic inversion to obtain a velocity–depth model. The CFP method is less fast and less automated than the CRS method. From a pointwise comparison of features it is concluded that one method is not a subset of the other, but that both methods can be regarded as being to some extent complementary. 相似文献
10.
We review the multifocusing method for traveltime moveout approximation of multicoverage seismic data. Multifocusing constructs the moveout based on two notional spherical waves at each source and receiver point, respectively. These two waves are mutually related by a focusing quantity. We clarify the role of this focusing quantity and emphasize that it is a function of the source and receiver location, rather than a fixed parameter for a given multicoverage gather. The focusing function can be designed to make the traveltime moveout exact in certain generic cases that have practical importance in seismic processing and interpretation. The case of a plane dipping reflector (planar multifocusing) has been the subject of all publications so far. We show that the focusing function can be generalized to other surfaces, most importantly to the spherical reflector (spherical multifocusing). At the same time, the generalization implies a simplification of the multifocusing method. The exact traveltime moveout on spherical surfaces is a very versatile and robust formula, which is valid for a wide range of offsets and locations of source and receiver, even on rugged topography. In two‐dimensional surveys, it depends on the same three parameters that are commonly used in planar multifocusing and the common‐reflection surface (CRS) stack method: the radii of curvature of the normal and normal‐incidence‐point waves and the emergence angle. In three dimensions the exact traveltime moveout on spherical surfaces depends on only one additional parameter, the inclination of the plane containing the source, receiver and reflection point. Comparison of the planar and spherical multifocusing with the CRS moveout expression for a range of reflectors with increasing curvature shows that the planar multifocusing can be remarkably accurate but the CRS becomes increasingly inaccurate. This can be attributed to the fact that the CRS formula is based on a Taylor expansion, whereas the multifocusing formulae are double‐square root formulae. As a result, planar and spherical multifocusing are better suited to model the moveout of diffracted waves. 相似文献
11.
We rederive and generalize hyperbolic moveout formulae for the common-midpoint (CMP) gather and for the zero-offset (ZO) section that can be efficiently used for macro-model-independent reflection imaging in two-dimensional media. The hyperbolic moveout formulae for the common-midpoint gather are obtained from different Taylor series expansions of a particular parametric moveout surface defined in the multicoverage data space. Such a moveout surface involves three kinematic wave-field attributes of two hypothetical waves, which have to be determined by a coherency analysis. By using hyperbolic moveout curves in the CMP gather and in the ZO section one can determine these attributes in two steps. The relationships between the local shapes of the interfaces and the attributes of the hypothetical wave-fields attributes are considered by means of geometrical optics. The determination of these attributes allows to perform a macro-model-independent ZO simulation and a subsequent inversion. 相似文献
12.
胜利探区基于最优孔径的共反射面元(CRS)叠加的成功应用(英文) 总被引：1，自引：1，他引：0
由于CRS叠加考虑了反射层的局部特征和第一菲涅耳带内的全部反射,从而更充分地利用了多次覆盖反射数据的信息。就目前的地震资料处理技术而言,它是最佳的零偏移距成像方式。本论文利用改进型的参数优化技术,得到高质量的CRS运动学参数剖面,并利用参数剖面计算出叠加孔径,实现了基于最优孔径的CRS叠加,使CRS参数的用途得到了充分利用。模型数据和实际资料的试算表明,基于最优孔径的CRS叠加的成像剖面与传统CRS叠加剖面相比,有着较高的信噪比和同相轴的连续性。 相似文献
13.
Jürgen Mann Rainer Jger Thilo Müller German Hcht Peter Hubral 《Journal of Applied Geophysics》1999,42(3-4)
The simulation of a zero-offset (ZO) stack section from multi-coverage reflection data is a standard imaging method in seismic processing. It significantly reduces the amount of data and increases the signal-to-noise ratio due to constructive interference of correlated events. Conventional imaging methods, e.g., normal moveout (NMO)/dip moveout (DMO)/stack or pre-stack migration, require a sufficiently accurate macro-velocity model to yield appropriate results, whereas the recently introduced common-reflection-surface stack does not depend on a macro-velocity model. For two-dimensional seismic acquisition, its stacking operator depends on three wavefield attributes and approximates the kinematic multi-coverage reflection response of curved interfaces in laterally inhomogeneous media. The common-reflection-surface stack moveout formula defines a stacking surface for each particular sample in the ZO section to be simulated. The stacking surfaces that fit best to actual events in the multi-coverage data set are determined by means of coherency analysis. In this way, we obtain a coherency section and a section of each of the three wavefield attributes defining the stacking operator. These wavefield attributes characterize the curved interfaces and, thus, can be used for a subsequent inversion. In this paper, we focus on an application to a real land data set acquired over a salt dome. We propose three separate one-parametric search and coherency analyses to determine initial common-reflection-surface stack parameters. Optionally, a subsequent optimization algorithm can be performed to refine these initial parameters. The simulated ZO section obtained by the common-reflection-surface stack is compared to the result of a conventional NMO/DMO/stack processing sequence. We observe an increased signal-to-noise ratio and an improved continuity along the events for our proposed method — without loss of lateral resolution. 相似文献
14.
Conventional seismic data processing methods based on post‐stack time migration have been playing an important role in coal exploration for decades. However, post‐stack time migration processing often results in low‐quality images in complex geological environments. In order to obtain high‐quality images, we present a strategy that applies the Kirchhoff prestack time migration (PSTM) method to coal seismic data. In this paper, we describe the implementation of Kirchhoff PSTM to a 3D coal seam. Meanwhile we derive the workflow of 3D Kirchhoff PSTM processing based on coal seismic data. The processing sequence of 3D Kirchhoff PSTM includes two major steps: 1) the estimation of the 3D root‐mean‐square (RMS) velocity field; 2) Kirchhoff prestack time migration processing. During the construction of a 3D velocity model, dip moveout velocity is served as an initial migration velocity field. We combine 3D Kirchhoff PSTM with the continuous adjustment of a 3D RMS velocity field by the criteria of flattened common reflection point gathers. In comparison with post‐stack time migration, the application of 3D Kirchhoff PSTM to coal seismic data produces better images of the coal seam reflections. 相似文献
15.
共反射面元（Common Reflection Surface=CRS）叠加是一种特殊的零偏移距成像方法,实践中它具有独立于宏观速度模型和完全数据驱动实现的鲜明特色,CRS叠加理论认为在得到高质量的零偏移距剖面的同时,还可以得到三个有用的波场属性参数剖面反演宏观速度模型,CRS叠加剖面之后的叠后深度偏移质量将超过叠前深度偏移.虽然CRS叠加倡导的成像方式和承诺的上述理想境界带来了全新的启示,但是实践中这些特色同样带来了令人困扰的问题,为此我们提出了倾角分解CRS叠加方法解决这些问题.本文即是作者通过上述实践之后对CRS叠加方法形成的一些思考和总结. 相似文献
16.
Tariq Alkhalifah 《Geophysical Prospecting》2005,53(5):643-653
Imaging pre‐salt reflections for data acquired from the coastal region of the Red Sea is a task that requires prestack migration velocity analysis. Conventional post‐stack time processing lacks the lateral inhomogeneity capability, necessary for such a problem. Prestack migration velocity analysis in the vertical time domain reduces the velocity–depth ambiguity that usually hampers the performance of prestack depth‐migration velocity analysis. In prestack τ‐migration velocity analysis, the interval velocity model and the output images are defined in τ (i.e. vertical time). As a result, we avoid placing reflectors at erroneous depths during the velocity analysis process and thus avoid inaccurately altering the shape of the velocity model, which in turn speeds up the convergence to the true model. Using a 1D velocity update scheme, the prestack τ‐migration velocity analysis produces good images of data from the Midyan region of the Red Sea. For the first seismic line from this region, only three prestack τ‐migration velocity analysis iterations were required to focus pre‐salt reflections in τ. However, the second line, which crosses the first line, is slightly more complicated and thus required five iterations to reach the final, reasonably focused, τ‐image. After mapping the images for the two crossing lines to depth, using the final velocity models, the placements of reflectors in the two 2D lines were consistent at their crossing point. Some errors occurred due to the influence of out‐of‐plane reflections on 2D imaging. However, such errors are identifiable and are generally small. 相似文献
17.
在地表地形复杂的情况下,静校正不易做好,这是制约山地资料处理质量的一个很重要的因素.复杂地表共反射面元（CRS）叠加不需对叠前数据做静校正,而且在得到叠加剖面后可以利用叠加得到的波场参数剖面实现基准面重建.地震数据的试算表明,复杂地表CRS叠加得出的剖面与常规处理剖面相比有着较高的信噪比和同相轴连续性.与水平地表CRS叠加不同的是,在复杂地表CRS叠加的时距公式中,波场三参数耦合,难以通过简化CRS道集的方法将它们全部分离并逐个优化.引入模拟退火算法后,有效地解决了这一组合优化的难题. 相似文献
18.
Yonghai Zhang 《Geophysical Prospecting》2010,58(6):915-924
Seismic data acquired along rugged topographic surfaces present well‐known problems in seismic imaging. In conventional seismic data processing, datum statics are approximated by the surface consistence assumption, which states that all seismic rays travel vertically in the top layer. Hence, the datum static for each single trace is constant. In case this assumption does not apply, non‐constant statics are required. The common reflection surface (CRS) stack for rugged surface topography provides the capability to deal with this non‐vertical static issue. It handles the surface elevation as a coordinate component and treats the elevation variation in the sense of directional datuming. In this paper I apply the CRS stack method to a synthetic data set that simulates the acquisition along an irregular surface topography. After the CRS stack, by means of the wavefield attributes, a simple algorithm for redatuming the CRS stack section to an arbitrarily chosen planar surface is performed. The redatumed section simulates a stack section whose acquisition surface is the chosen planar surface. 相似文献
19.
共反射面元（CRS）叠加考虑了反射层的局部特征和第一菲涅耳带内的全部反射,更充分挖掘了多次覆盖数据的潜力.但在地下介质复杂并存在倾斜层时存在反射点分散的情况,从而影响了CRS叠加效果.本文从射线理论出发,在考虑反射层局部特征的情况下,推导了水平地表和起伏地表情况下计算真实反射点分散程度的公式,最终将反射点分散程度定量表达出来.通过对反射点分散程度的控制,从CRS道集中抽取出共反射点（CRP）道集,在CRP道集中而不是在CRS道集中实现叠加,其效果应比传统的CRS叠加效果要好.利用水平地表和起伏地表的模型验证了本文所推导的公式的正确性和有效性.该公式在实际资料处理中的运用尚待进一步研究. 相似文献