共查询到20条相似文献，搜索用时 46 毫秒
1.
单点系泊海洋导管架平台结构体系可靠性分析 总被引：4，自引：1，他引：3
采用非线性逐步倒塌分析方法,考虑桩-土-结构的非线性相互作用,研究了单点系泊海洋导管架平台在极端荷载作用下的承载能力计算模型,在此基础上结合蒙特卡洛随机抽样法,提出了单点系泊海洋导管架平台结构体系可靠度计算方法。最后对工程实例BZ28-1SPM单点系?白海洋导管架平台结构在20年设计基准期和50年重现期进行了体系可靠性分析：研究结果表明：用50年重现期的环境荷载参数来进行BZ28-1SPM单点系泊海洋导管架平台结构的设计是合理的;在环境荷载中起主导作用的是由波浪引起的系泊力;在海洋平台结构的设计及对已服役平台结构的评估中运用体系可靠度理论,可以为海洋平台结构的设计、维护和评估提供理论依据。 相似文献
2.
1.IntroductionLoad and Resistance Factor Design(LRFD)isthe commonly adoptedreliability-based designfor-mat for structural design(CNE,1990;AAHTO,1994;OMTC,1983;CMC,1984).Code calibra-tionforthe LRFDformat is a processto determinethetarget reliability by de… 相似文献
3.
1 .IntroductionThe structural design method has evolvedfromthe workingstress method,damage stage methodtolimit state method.The more recent probabilisticlimit state design method,whichis based onreliabili-tytheory,has beengenerallyacceptedinthe designcode… 相似文献
4.
极端荷载作用下海洋导管架平台体系可靠度分析 总被引：4，自引：1，他引：4
采用非线性倒塌分析方法，考虑桩－土－结构的非线性相互作用，研究了导管架平台在极端荷载作用下承载能力的计算模型，分析了平台结构体系在极端荷载作用下的全倒塌全过程，在此基础上，结合蒙特卡洛法，提出了海洋导管架平台结构的体系可靠度计算方法。最后对工程实例－涠11－4C海洋平台的结构进行了体系可靠性分析，并对比分析了不同的荷载效应计算公式对计算经的影响，研究表明计算经满足工程设计要求，便于工程应用。 相似文献
5.
Corrosion and fatigue cracks are major threats to the structural integrity of aging offshore platforms.For the rational estimation of the safety levels of aging platforms,a global reliability assessment approach for aging offshore platforms with corrosion and fatigue cracks is presented in this paper.The base shear capacity is taken as the global ultimate strength of the offshore plaffoms,it is modeled as a random process that decreases with time in the presence of corrosion and fatigue crack propagation.And the corrosion and fatigue crack growth rates in the main members and key joints are modeled as random variables.A simulation method of the extreme wave loads which are applied to the structures of offshore platforms is proposed too.Furthermore,the statistics of global base shear capacity and extreme wave loads are obtained by Monte Carlo simulation method.On the basis of the limit state equation of global failure mode,the instantaneous reliability and time dependent reliability assessment methods are both presented in this paper.Finally the instantaueous reliability index and time dependent failure probability of a jacket platform are estimated with different ages in the demonstration example. 相似文献
6.
针对在役老龄导管架平台进行倒塌计算分析,确定极限承载力进而评估老龄导管架的安全裕度。采用非线性有限元方法,考虑平台的波流载荷及桩-土的非线性相互作用,利用SACS软件建立导管架整体三维有限元计算分析模型,并用逐步加载的方式,对南海某导管架平台进行了全过程非线性倒塌分析。计算分析表明,该导管架平台极限强度很高,具有较大的安全裕度;导管架倒塌过程呈逐步破坏形式,先是撑杆屈服,造成局部结构破坏,然后是钢桩发生屈服,降低结构承载力,最后节点逐步失效,造成结构倒塌。揭示了导管架平台结构失效倒塌的机理,给出了倒塌分析的可行方法和步骤。 相似文献
7.
Efficient Approximate Method of Global Reliability Analysis for Offshore Platforms in the Ice Zone 总被引：1，自引：0，他引：1
Ice load is the dominative load in the design of offshore platforms in the ice zone, and the extreme ice load is the key factor that affects the safety of platforms. The present paper studies the statistical properties of the global resistance and the extreme responses of the jacket platforms in Bahai Bay, considering the randomness of ice load, dead load, steel elastic modulus, yield strength and structural member dimensions. Then, based on the above results, an efficient approximate method of the global reliability analysis for the offshore platforms is proposed, which converts the implicit nonlinear performance function in the conventional reliability analysis to linear explicit one. Finally, numerical examples of JZ20-2 MSW, JZ20-2NW and JZ20-2 MUQ offshore jacket platforms in the Bahai Bay demonstrate the satisfying efficiency, accuracy and applicability of the proposed method. 相似文献
8.
Owing to the ageing of the existing structures worldwide and the lack of codes for the continued safely management of structures during their lifetime, it is very necessary to develop a tool to evaluate their system reliability over a time interval. In this paper, a method is proposed to analyze system reliability of existing jacket platforms. The influences of dint, crack and corrosion are considered. The mechanics characteristics of the existing jacket platforms to extreme loads are analyzed by use of the nonlinear mechanical analysis. The nonlinear interaction of pile-soil-structure is taken into consideration in the analysis. By use of FEM method and Monte Carlo simulation, the system reliability of the existing jacket platforul can be obtained. The method has been illustrated through application to BZ28-1 three jacket platforms which have operated for sixteen years. Advantages of the proposed method for analyzing the system reliability of the existing jacket platform is also highlighted. 相似文献
9.
The offshore jacket platform is a complex and time-varying nonlinear system,which can be excited of harmful vibration by external loads.It is difficult to obtain an ideal control performance for passive control methods or traditional active control methods based on accurate mathematic model.In this paper,an adaptive inverse control method is proposed on the basis of novel rough neural networks (RNN) to control the harmful vibration of the offshore jacket platform,and the offshore jacket platform model is established by dynamic stiffness matrix (DSM) method.Benefited from the nonlinear processing ability of the neural networks and data interpretation ability of the rough set theory,RNN is utilized to identify the predictive inverse model of the offshore jacket platform system.Then the identified model is used as the adaptive predictive inverse controller to control the harmful vibration caused by wave and wind loads,and to deal with the delay problem caused by signal transmission in the control process.The numerical results show that the constructed novel RNN has advantages such as clear structure,fast training speed and strong error-tolerance ability,and the proposed method based on RNN can effectively control the harmfid vibration of the offshore jacket platform. 相似文献
10.
11.
For the fulfillment of the probability-based structural design for the offshore jacket platforms in the Bohai Bay, the design factors of loads, resistance and load combinations are much necessary to be calibrated according to the proposed target reliability index. Firstly, the limit states function for the offshore jacket platforms is introduced. Then, four approaches to calibrate the factors of load and resistance are presented and compared. Afterwards, the methods to calibrate the load combination factors are developed. Finally, the factors of load, resistance and load combination for the offshore jacket platforms in the Bohai Bay are calibrated and the corresponding design formulae are recommended. The results are proved to be rational in practice, and also illustrate that the proposed target reliability index for offshore jacket platforms in the Bohai Bay is also appropriate. 相似文献
12.
The target reliability index has been effectively used as the best solution to deal with the relationship between the structural safety and the optimal economy in any structural design.However,the target reliability index for offshore jacket platforms based on different sea areas in China has never been calibrated.This paper presents an approach for its calibration,and suggests many kinds of associated load cases.The uncertainties of loads and structural resistance are mainly investigated.The target reliability index for structural components,tubular joints and piles of offshore jacket platforms are discussed respectively in detail.Finally,through the calibrated results from the offshore jacket platforms of QK18-1,JZ20-2,SZ36-1 and BZ28-1 in the Bohai Bay,it is proposed to adopt 2.8 as the target reliability index of offshore jacket platforms in the Bohai Bay for a 25-year design period.The results provide significant reference for the design of offshore jacket platforms. 相似文献
13.
- The ultimate strength analysis of offshore jacket platforms is a research project which has been developed in recent years. With the rapid development of marine oil industry, the departments of design and IMR (Inspection, Maintenance and Repair) in the offshore engineering have attached great importance to this project. The research procedure applies to both the stress check of new design platforms and the whole safety assessment of existing platforms. In this paper, we combine the pseudo non-linear technique with the linear analysis program and successfully analyze the ultimate strength of the space frame structure subject to the concentrated load and a real jacket platform subject to the dead load and environmental load. 相似文献
14.
The target reliability index has been effectively used as the best solution to deal with the relationship between the structural safety and the optimal economy in any structural design. However, the target reliability index for off-shore jacket platforms based on different sea areas in China has never been calibrated. This paper presents an approach for its calibration, and suggests many kinds of associated load cases. The uncertainties of loads and structural resistance are mainly investigated. The target reliability index for structural components, tubular joints and piles of offshore jacket platforms are discussed respectively in detail. Finally, through the calibrated results from the offshore jacket platforms of QK18-1, JZ20-2, SZ36-1 and BZ28-1 in the Bohai Bay, it is proposed to adopt 2.8 as the target reliability index of offshore jacket platforms in the Bohai Bay for a 25-year design period. The results provide significant reference for the design of offshore jacket platforms. 相似文献
15.
With noticing an increasing number of failure events for offshore structures in the present days, it is now realized that modeling the marine environment especially for exceptional environmental conditions is quite important. It is recognized that a possible improvement in the traditional modeling of environmental characteristics, which are the basis for the load models for structural analysis and design, may be needed. In this paper, the seasonal and directional varying properties in modeling the ocean parameter, the wave height, are studied. The peak over threshold (POT) method is selected to model the extreme wave height by utilizing a non-stationary discrete statistical extreme model. The varying parameters are taken into account with a changing pattern to reflect the seasonal and directional dependent behavior. Both the magnitude and the occurrence rate of the extreme values are investigated. Detailed discussion on the continuity of the established model is also given. The importance of the proposed model is demonstrated in reliability analysis for a jacket structure. The sensitivity to the changing marine environment in reliability analyses is investigated. 相似文献
16.
Offshore jacket platform is widely used as production or oil recovering platform in the shallow sea, and is also applied to the offshore wind turbine supporting structure in the recent years. The jacket structures are normally designed to be conservative and bulky according to various design codes. In this work, a structural optimization design method for jacket platform structure has been developed based on topology optimization theory. The topology optimization method is applicable at an early design stage, which can determine the initial structure and force transmission path. The whole design space is chosen as design variables, and the goal is to maximize the structural stiffness. A set of constraints based on multi-criteria design assessment is applied according to standard requirements, which includes stress, deformation, vibration and design variable constraints. The optimization results are compared with the original platform for static performance, dynamic performance and Ultimate Carrying Capacity (UCC). Results show that the optimized structure show a 13.7% reduction in the global mass, 46.31% reduction in the maximum equivalent stress, and large ultimate carrying capacity ability under the same environmental loads. It is demonstrated that the proposed topology optimization method is capable of effectively determining the optimal design of jacket platform structures. 相似文献
17.
With noticing an increasing number of failure events for offshore structures in the present days, it is now realized that modeling the marine environment especially for exceptional environmental conditions is quite important. It is recognized that a possible improvement in the traditional modeling of environmental characteristics, which are the basis for the load models for structural analysis and design, may be needed. In this paper, the seasonal and directional varying properties in modeling the ocean parameter, the wave height, are studied. The peak over threshold (POT) method is selected to model the extreme wave height by utilizing a non-stationary discrete statistical extreme model. The varying parameters are taken into account with a changing pattern to reflect the seasonal and directional dependent behavior. Both the magnitude and the occurrence rate of the extreme values are investigated. Detailed discussion on the continuity of the established model is also given. The importance of the proposed model is demonstrated in reliability analysis for a jacket structure. The sensitivity to the changing marine environment in reliability analyses is investigated. 相似文献
18.
Jacket cutting operation is one of the most complicated and highest risk operations in the process of decommissioning offshore piled platform, the security and stability of which must be assured. In this paper, the current research on offshore structure removal and jacket cutting is introduced, on the basis of which the types of load along with the load calculation method are determined. The main influences on the stability of a jacket in cutting are analyzed. The experiment test plan is drawn by using orthogonal testing method, and the formula of critical load during the cutting procedure is deduced by differential evolution algorithm. To verify the method and results of this paper, an offshore piled platform to be decommissioned in the South China Sea is taken for an example, and the detailed schedule for jacket cutting is made with the three-dimensional finite element model of the jacket established. The natural frequency, stress, strain and stability of the jacket during cutting process are calculated, which indicates that the results of finite element analysis agree well with that of the deduced formula. The result provides the scientific reference for guaranteeing the safety of jacket in cutting operation. 相似文献
19.
考虑流固耦合时的海洋平台结构非线性动力分析 总被引：11，自引：0，他引：11
采用非线性的Morison方程,建立了考虑流固耦合时的海洋平台非线性动力方程及其时程分析方法.以一固定式导管架平台为算例,计算了考虑流固耦合时的海洋平台浪致振动响应,比较了考虑流固耦合和不考虑流固耦合时海洋平台动力响应的差异.算例表明：在较大的波浪条件下,不考虑流固耦合时的计算结果明显小于考虑流固耦合时的计算结果,因此,偏于不安全.分析认为,在极端海况条件下,考虑流固耦合的分析方法更符合实际情况. 相似文献
20.
For the fulfillment of the probability-based structural design for the offshore jacket platforms in the Bohai Bay, the design factors of loads, resistance and load combinations are much necessary to be calibrated according to the proposed target reliability index. Firstly, the limit states function for the offshore jacket platforms is introduced. Then, four approaches to calibrate the factors of load and resistance are presented and compared. Afterwards, the methods to calibrate the load combination factors... 相似文献