共查询到17条相似文献，搜索用时 750 毫秒
1.
ASTER GDEM与SRTM3高程差异影响因素分析 总被引：3，自引：0，他引：3
作为最新发布的全球地形数据,ASTER GDEM比目前常用的SRTM3数据有着更高的分辨率和更广的覆盖范围,对于相关地学分析具有重要意义。本文以华中地区为研究区域,对ASTER GDEM与SRTM3数据进行了比较,重点分析了坡度、坡向、地形起伏度、土地利用类型、植被覆盖度、生成ASTER GDEM栅格点高程数据所用的ASTER DEM影像数等因素对2种DEM数据高程差异的影响。结果表明,在研究区域内,ASTER GDEM高程比SRTM3高程平均低5.42 m,两种DEM数据高程差异的RMS值为16.90 m;ASTER GDEM与SRTM3之间的高程差异随着坡度、地形起伏度、植被覆盖度的增大而增大,而ASTER DEM影像数越大,高程差异越小;坡向、土地利用类型对高程差异也有影响。 相似文献
2.
ASTER GDEM V2是研究南极冰盖表面的一种重要DEM数据源。由于南极冰雪区反射率高且缺乏地形特征，导致ASTER GDEM V2存在大量的坑、隆起等噪声，难以直接用于南极地形分析。本文以ICESat/GLAS激光点高程数据作为参考，采用修正等高线法对南极伯德（Byrd）冰川ASTER GDEM V2进行了误差校正，并将其与ICESat-1 DEM的垂直精度进行了对比分析。结果表明：ASTER GDEM V2的RMSE由校正前的26.56 m下降到校正后的18.77 m，远低于ICESat-1 DEM的RMSE（121.24 m）；校正后的ASTER GDEM V2高程精度受坡度影响较小，不存在明显的系统误差，而ICESat-1 DEM的高程精度受坡度的影响较大。本研究进一步通过地形剖面分析得到：校正前的ASTER GDEM V2噪声主要分布于高程较低、地形平坦的区域，通过修正等高线的方法可以有效去除这些噪声，去除噪声后的ASTER GDEM V2可作为研究伯德冰川理想的DEM数据源。 相似文献
3.
中国地区30 m分辨率SRTM质量评估 总被引：5，自引：0，他引：5
高分辨率、高质量地形数据有利于地震、火山与滑坡地质灾害等环境变化相关的研究。2014年9月,美国国家地理空间情报局宣布30 m分辨率的SRTM DEM数据逐步向全球用户免费开放。本文对中国境内最新发布的SRTM DEM开展了质量评估与验证工作,讨论了传感器波长、植被覆盖、影像数量等影响DEM质量的关键因素。研究结果表明,30 m分辨率的SRTM DEM高程精度（10 m）与SRTMX DEM相当,并优于ASTER GDEM v2、SRTM v4.1和SRTM v3。 相似文献
4.
5.
为了解我国ASTER GDEM数据高程精度,在考虑空间分布的情况下,选取我国东部辽宁、山东、浙江和海南4个地区的平原、丘陵、山地等作为典型研究区,并以1∶5万DEM为假定真值、以1∶25万DEM为参照,通过DEM面误差可视化分析和DEM面误差信息熵模型等方法对ASTER GDEM数据的高程精度做了分析。结果表明:ASTER GDEM数据高程误差在整个地图上分布是否均匀与其高程精度高低无决定关系;在山地和丘陵地形研究区,其数据高程精度要高于SRTM DEM和1∶25万DEM。总体来看,中国东部地区ASTER GDEM数据高程精度整体上要高于SRTM DEM和1∶25万DEM,但低于1∶10万DEM。 相似文献
6.
海岸带地区SPOT-5遥感影像无控制点正射校正方法 总被引：1，自引：0，他引：1
本文利用ENVI遥感软件处理平台,针对海岸带地区影像特点,对传统的SPOT-5遥感影像正射校正流程进行改进,主要有:增加SPOT传感器辐射校正;在影像融合前,使用伪正射校正代替几何校正;利用GDEM数据代替传统的DEM测量数据及野外测点数据;使用Google Earth Bridge功能检验校正结果精度。结果表明:经过改进的无控制点正射校正流程可有效减少人为误操作产生的误差,降低了正射校正的难度,提高了影像处理的效率,拓宽了影像检验的思路。正射校正影像精度符合研究要求,取得较为满意的结果。 相似文献
7.
为了评价国产资源三号测绘卫星DSM数据精度,在顾及地貌类型的情况下,以涵盖平原、台地、丘陵等地貌的高海拔山区为研究案例,并以1∶1万实测地形图DEM为假定真值,以90m分辨率SRTM DEM为评价参照,从高程精度和地形描述精度两个方面,对15m分辨率ZY-3DSM进行精度评价分析。研究结果表明:ZY-3DSM高程精度优于SRTM DEM,前者高程中误差仅为后者的1/6;就地形描述精度来讲,ZY-3DSM与SRTM DEM相比,其地形描述精度更接近理论值,前者RMS Et实际值仅为理论值0.99倍,而后者的实际值却是理论值5.13倍。由此看来,ZY-3DSM数据精度整体上高于SRTM DEM。 相似文献
8.
9.
利用中巴资源卫星(CBERS)遥感影像,建立自主版权的基准遥感影像数据库.在建库之前,需要对CBERS影像进行正射校正,拟采用国外公开的正射TM影像作为控制点选取影像,采用国外公开的SRTM作为DEM数据源.利用以上数据,对丘陵和平原的CBERS影像进行正射校正试验.为验证试验结果的可靠性,利用西安80坐标系转换到WGS-84坐标系下的地形图来检验正射校正精度.试验结果证明其正射校正的精度在1.5个像元以内. 相似文献
10.
本文侧重于介绍智能化摄影测量机器学习的高差拟合神经网络方法。观测手段和处理方式等限制导致全球高质量无缝DEM数据的缺乏,进而制约了它在水文、地质、气象及军事等领域的应用。本文提出了一种基于高差拟合神经网络的多源DEM融合方法,尝试融合全球DEM产品SRTM1、ASTER GDEM v2和激光雷达测高数据ICESat GLAS。首先,根据ICESat GLAS的相关参数及与DEM数据的高程差值,结合坡度自适应的思想设置高差阈值对ICESat GLAS进行滤波,剔除异常数据点。然后,以ICESat GLAS数据为控制点,利用神经网络模型拟合ASTER GDEM v2的误差分布。以地形坡度信息和经纬度坐标作为网络输入,ICESat GLAS和ASTER GDEM v2的高程差值作为目标输出,训练得到预测高差,将其与ASTER GDEM v2高程值相加即可获得校正结果。最后,引入TIN差分曲面的方法,利用校正后的ASTER GDEM v2高程值对SRTM1的数据空洞进行填充,融合生成空间无缝DEM。本文通过随机选取数据进行真实试验,对模型进行了精度验证,并给出了处理结果的定量评价和目视效果。结果表明,不论是空洞还是整体区域,本文方法相比其他DEM数据集和其他方法的处理结果都能够在RMSE上表现出优势,同时,本文提出的方法能够有效克服ASTER GDEM中异常值的影响,得到空间无缝DEM。 相似文献
11.
12.
由于数据获取与后期处理方式不同,先进星载热发射和反射辐射仪全球数字高程模型(advanced spaceborne thermalemissionandreflectionradiometerglobaldigitalelevationmodel,ASTERGDEM)和航天飞机雷达地形测绘任务(shuttle radar topography mission,SRTM)数据在高程精度上存在差异,采用弹性反馈（resilient backpropagation,RProp）神经网络算法对二者进行融合处理,实现优势互补以提升高程精度。选取两个黄土丘陵沟壑地貌样区分别用于模型建立与效果验证,1∶10 000高程精度为参考数据,在建模样区应用RProp神经网络算法构建ASTER GDEM高程校正模型、SRTM1高程校正模型、ASTER GDEM与SRTM1高程融合模型,同时应用误差反向传播(back propagation,BP)神经网络建立ASTER GDEM与SRTM1高程融合模型,将这些模型的高程精度优化效果进行对比,并在验证样区检验RProp融合模型的可行性。结果表明,RProp融合模... 相似文献
13.
Pratima Pandey Surendar Manickam Avik Bhattacharya AL. Ramanathan Gulab Singh G. Venkataraman 《国际地球制图》2017,32(4):442-454
Glaciers have a high impact in the socio-economic sectors including water supply, energy production, flood and avalanches. A high precision digital elevation model (DEM) is required to monitor glaciers and to study various glacier processes. The present study deals with the qualitative and quantitative evaluation of the DEM generated from the bistatic TanDEM-X data by comparing it with GPS, Ice, Cloud, and land Elevation Satellite (ICESat) data and standard global DEMs such as Shuttle Radar Topography Mission (SRTM) and Advanced Space-borne Thermal Emission and Reflection Radiometer Global DEM (ASTER GDEM). The study area consists of highly undulating glaciated terrain in western Himalaya, India. The results reveal that TanDEM-X is slightly better than SRTM both qualitatively and quantitatively, whereas ASTER GDEM showing maximum discrepancy among the three DEMs. The Root Mean Square Error (RMSE) of the TanDEM-X DEM with respect to GPS is 3.5 m at lower relief and 11.9 m at glaciated terrain, against 6.7 and 12.5 m for SRTM and 9.3 and 19.8 m for ASTER GDEM, respectively, for the same sites. On an average, for the whole study area, the RMSE of TanDEM-X is 7.9 m, SRTM is 9.3 m and ASTER GDM is 14.2 m. The RMSE of TanDEM-X, SRTM and ASTER GDEM with respect to ICESat are 16.3, 19.9 and 101.1 m, respectively. It is evident from the analysis that though SRTM is closer to TanDEM-X in terms of accuracy in the mountainous terrain, however, TanDEM-X will be more useful for studying glacier dynamics and topography. 相似文献
14.
Loudi Yap Ludovic Houetchak Kandé Robert Nouayou Nasser Abdou Ngouh Marie Brigitte Makuate 《International Journal of Digital Earth》2019,12(5):500-524
Digital Elevation Models (DEMs) contain topographic relief data that are vital for many geoscience applications. This study relies on the vertical accuracy of publicly available latest high-resolution (30?m) global DEMs over Cameroon. These models are (1) the ALOS World 3D-30?m (AW3D30), (2) the Shuttle Radar Topography Mission 1 Arc-Second C-Band Global DEM (SRTM 1) and (3) the Advanced Spaceborne Thermal Emission and Reflection Global DEM Version 2 (ASTER GDEM 2). After matching their coordinate systems and datums, the horizontal positional accuracy evaluation was carried out and it shows that geolocation errors significantly influence the vertical accuracy of global DEMs. After this, the three models are compared among them, in order to access random and systematic effects in the elevation data each of them contains. Further, heights from 555 GPS/leveling points distributed all over Cameroon are compared to each DEM, for their vertical accuracy determination. Traditional and robust statistical measures, normality test, outlier detection and removal were used to describe the vertical quality of the DEMs. The test of the normality rejected the hypothesis of normal distribution for all tested global DEMs. Overall vertical accuracies obtained for the three models after georeferencing and gross error removal in terms of Root Mean Square (RMS) and Normalized Median Absolute Deviation (NMAD) are: AW3D30 (13.06?m and 7.75?m), SRTM 1 (13.25?m and 7.41?m) and ASTER GDEM 2 (18.87?m and 13.30?m). Other accuracy measures (MED, 68.3% quantile, 95% quantile) supply some evidence of the good quality of AW3D30 over Cameroon. Further, the effect of land cover and slope on DEM vertical accuracy was also analyzed. All models have proved to be worse in the areas dominated by forests and shrubs areas. SRTM 1 and AW3D30 are more resilient to the effects of the scattering objects respectively in forests and cultivated areas. The dependency of DEMs accuracy on the terrain roughness is evident. In all slope intervals, AW3D30 is performing better than SRTM 1 and ASTER GDEM 2 over Cameroon. AW3D30 is more representative of the external topography over Cameroon in comparison with two others datasets and SRTM 1 can be a serious alternative to AW3D30 for a range of DEM applications in Cameroon. 相似文献
15.
Digital elevation model (DEM) data of Shuttle Radar Topography Mission (SRTM) are distributed at a horizontal resolution of 90 m (30 m only for US) for the world, Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) DEM data provide 30 m horizontal resolution, while CARTOSAT-1 (IRS-P5) gives 2.6 m horizontal resolution for global coverage. SRTM and ASTER data are available freely but 2.6 m CARTOSAT-1 data are costly. Hence, through this study, we found out a horizontal accuracy for selected ground control points (GCPs) from SRTM and ASTER with respect to CARTOSAT-1 DEM to implement this result (observed from horizontal accuracy) for those areas where the 2.6-m horizontal resolution data are not available. In addition to this, the present study helps in providing a benchmark against which the future DEM products (with horizontal resolution less than CARTOSAT-1) with respect to CARTOSAT-1 DEM can be evaluated. The original SRTM image contained voids that were represented digitally as ?140; such voids were initially filled using the measured values of elevation for obtaining accurate DEM. Horizontal accuracy analysis between SRTM- and ASTER-derived DEMs with respect to CARTOSAT-1 (IRS-P5) DEM allowed a qualitative assessment of the horizontal component of the error, and the appropriable statistical measures were used to estimate their horizontal accuracies. The horizontal accuracy for ASTER and SRTM DEM with respect to CARTOSAT-1 were evaluated using the root mean square error (RMSE) and relative root mean square error (R-RMSE). The results from this study revealed that the average RMSE of 20 selected GCPs was 2.17 for SRTM and 2.817 for ASTER, which are also validated using R-RMSE test which proves that SRTM data have good horizontal accuracy than ASTER with respect to CARTOSAT-1 because the average R-RMSE of 20 GCPs was 3.7 × 10?4 and 5.3 × 10?4 for SRTM and ASTER, respectively. 相似文献
16.
Xiaoping Du Huadong Guo Xiangtao Fan Junjie Zhu Zhenzhen Yan Qin Zhan 《International Journal of Digital Earth》2016,9(3):252-271
The frequency of coastal flood damages is expected to increase significantly during the twenty-first century as sea level rises in the coastal floodplain. Coastal digital elevation model (DEM) data describing coastal topography are essential for assessing future flood-related damages and understanding the impacts of sea-level rise. The Shuttle Radar Topography Mission (SRTM) and Advanced Spaceborne Thermal Emission and Reflection Radiometer Global Digital Elevation Model (ASTER GDEM) are currently the most accurate and freely available DEM data. However, an accuracy assessment specifically targeted at DEMs over low elevation coastal plains is lacking. The present study focuses on these areas to assess the vertical accuracy of SRTM and ASTER GDEM using Ice, Cloud, and land Elevation Satellite, Geoscience Laser Altimeter System (ICESat/GLAS) and Real Time Kinematic (RTK) Global Positioning System (GPS) field survey data. The findings show that DEM accuracy is much better than the mission specifications over coastal plains. In addition, optical remote sensing image analysis further reveals the relationship between DEM vertical accuracy and land cover in these areas. This study provides a systematic approach to assess the accuracy of DEMs in coastal zones, and the results highlight the limitations and potential of these DEMs in coastal applications. 相似文献
17.
SRTM、ASTER GDEM和AW3D是比较有代表性的全球数字高程模型。本文探讨了采用车载动态PPP技术对上述3类模型的区域高程精度进行检核,首先沿广州至肇庆公路进行连续数据采集,采用动态精密单点定位（PPP）技术解算动态点的WGS-84坐标;然后利用EGM2008重力场模型和仪器高获得动态点的正常高;最后采用4种不同的插值方法对SRTM、ASTER GDEM和AW3D模型进行高程检验。检核结果显示：不同的插值方法具有较好的一致性,SRTM3 V4.1、ASTER GDEM V2、AW3D30的高程标准差分别优于3.4 m、4.1 m和3.3 m,均优于其全球标称高程精度;本文检核方法快速高效,有较好的适用性。 相似文献