首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
Fragility curves express the probability of structural damage due to earthquakes as a function of ground motion indices, e.g., PGA, PGV. Based on the actual damage data of highway bridges from the 1995 Hyogoken‐Nanbu (Kobe) earthquake, a set of empirical fragility curves was constructed. However, the type of structure, structural performance (static and dynamic) and variation of input ground motion were not considered to construct the empirical fragility curves. In this study, an analytical approach was adopted to construct fragility curves for highway bridge piers of specific bridges. A typical bridge structure was considered and its piers were designed according to the seismic design codes in Japan. Using the strong motion records from Japan and the United States, non‐linear dynamic response analyses were performed, and the damage indices for the bridge piers were obtained. Using the damage indices and ground motion indices, fragility curves for the bridge piers were constructed assuming a lognormal distribution. The analytical fragility curves were compared with the empirical ones. The proposed approach may be used in constructing the fragility curves for highway bridge structures. Copyright © 2001 John Wiley & Sons, Ltd.  相似文献   

2.
The trend of isolating highway bridges is on the rise after the recent large earthquakes in Japan, the United States, and other countries. Recent investigation shows that isolated systems perform well against seismic forces as the substructures of such systems experience less lateral forces due to energy dissipation of the isolation device. Hence, it is anticipated that there might be an effect on fragility curves of highway bridges due to isolation. In this study, 30 isolated bridge models were considered (and they were designed according to the seismic design code of highway bridges in Japan) to have a wider range of the variation of structural parameters, e.g. pier heights, weights, and over-strength ratio of structures. Then, fragility curves were developed by following a simplified procedure using 250 strong motion records, which were selected from 5 earthquake events that occurred in Japan, the USA, and Taiwan. It is observed that the level of damage probability for the isolated system is less than that of the non-isolated one for a lower level of pier height. However, having the same over-strength ratio of the structures, the level of damage probability for the isolated system is found to be higher for a higher level of pier height compared to the one of the non-isolated system. The proposed simple approach may conveniently be used in constructing fragility curves for a class of isolated bridge structures in Japan that have similar characteristics.  相似文献   

3.
Seismic fragility curves for greek bridges: methodology and case studies   总被引：2，自引：1，他引：1  
This study focusses on the estimation of seismic fragility curves for all common bridge types found in modern greek motorways. At first a classification scheme is developed in order to classify the existing bridges into a sufficient number of classes. A total of 11 representative bridge classes resulted, based on the type of piers, deck, and pier-to-deck connection. Then an analytical methodology for deriving fragility curves is proposed and applied to the representative bridge models. This procedure is based on pushover analysis of the entire bridge and definition of damage states in terms of parameters of the bridge pushover curves. The procedure differentiates the way of defining damage according to the seismic energy dissipation mechanism in each bridge, i.e. bridges with yielding piers of the column type and bridges with bearings (with or without seismic links) and non-yielding piers of the wall type. The activation of the abutment-backfill system due to closure of the gap between the deck and the abutments is also taken into account. The derived fragility curves are subjected to a first calibration against empirical curves based on damage data from the US and Japan.  相似文献   

4.
以美国西部地区某斜交公路连续刚构桥为研究对象，研究其不等高墩易损性差异以及斜交角的改变对桥墩地震易损性的影响。考虑桥梁结构参数和地震动的不确定性，选取100条地震动，沿纵桥向输入，生成"结构-地震动"样本库，以地震动峰值加速度（PGA）为强度指标（IM），利用OpenSees软件对结构进行非线性时程分析得到桥墩动力响应，而后以桥墩曲率延性比衡量桥梁破坏状态，在确定桥墩损伤指标的基础上，采用可靠度理论得到各桥墩的地震易损性曲线，判断桥墩的损伤模式、损伤特点。在此基础上，改变桥梁斜交角度进行易损性分析，得到斜交角变化对桥墩地震易损性的影响。研究表明：该桥最矮墩发生损伤的概率大于其他桥墩，桥墩最先进入塑性的是墩顶和墩底区域；不同斜交角对桥墩的地震响应影响显著，各墩损伤破坏排序与斜交桥结构构造特点有关，同一排架墩的两侧墩柱易损性呈现与角度变化趋势相反的排列，损伤越严重，趋势越明显；对于此不等高的斜交刚构桥，最矮墩为其抗震薄弱环节，斜交角越大，越应该关注钝角处矮墩的损伤情况，并提高其设计标准，在进行斜交刚构桥抗震设计中应予以重视。  相似文献   

5.
桥梁在长期服役过程中面临的氯离子侵蚀作用会导致材料性能退化,进而影响桥梁结构的抗震性能。准确评估服役桥梁的抗震性能可以有效保障和提高桥梁结构的安全性,因此开展考虑时变效应的桥梁地震易损性分析非常必要。考虑到地震易损性分析涉及大量的动力时程分析,计算效率很低,故采用高斯过程模型取代耗时的动力时程分析,旨在提高地震易损性分析效率。以一座三跨连续梁桥为例,探究氯离子侵蚀作用下桥墩材料性能的退化规律,建立纵筋、箍筋以及保护层和核心混凝土材料性能退化时变曲线;基于高斯过程模型和联合概率地震需求模型,建立桥梁系统在不同服役年限下的易损性曲线和曲面。结果表明：(1)氯离子侵蚀作用明显降低了桥墩钢筋混凝土材料的强度;(2)氯离子侵蚀作用明显提高了高等级损伤的桥梁地震易损性,结构更容易发生高等级损伤。  相似文献   

6.
桥梁作为交通生命线系统中的重要工程,屡次在中等强度地震的作用下,遭受严重破坏甚至整体损毁,因此桥梁结构地震易损性研究在世界各国得到重视和发展。部分斜拉桥作为一种新桥型,由于兼有经济性和美学特性,近十年来在国内外发展迅速,但这种新桥型尚未经受地震的考验,在可能的地震灾害下,部分斜拉桥的地震破坏损伤概率还不明确,有必要开展有关的易损性研究。本文在桥梁地震易损性研究的基础上,分析在横桥向地面运动作用下独塔部分斜拉桥的易损性,定义五级损伤极限状态,建立桥墩、桥塔、限位器和全桥的易损性曲线,研究结果表明在横桥向地面运动作用下,独塔部分斜拉桥全桥易损性主要受到限位器和中墩的控制。  相似文献   

7.
An analytical fragility analysis was conducted in order to characterize the seismic vulnerability of existing southern Illinois wall pier supported highway bridges to potential earthquakes. To perform this fragility analysis, a detailed inventory survey was first taken of the wall pier bridges identified in an earlier random sampling of southern Illinois priority emergency route bridges. From the survey three types of wall pier bridges were identified. Of those identified, hammerhead and regular wall pier supported bridges represented nearly 90% of the population. Incorporating structural variations determined from the random sample survey, nearly 100 three‐dimensional nonlinear finite element models were constructed. Each model was subjected to a randomly assigned synthetic earthquake representative of those that could potentially occur within the region. From these analyses, a series of wall pier supported bridge fragility curves were produced. In addition, a liquefaction fragility analysis was conducted in order to characterize the seismic vulnerability of southern Illinois wall pier supported highway bridge sites to liquefaction in potential earthquakes. To perform this second fragility analysis, wall pier bridges within the southern Illinois random sample that may be susceptible to liquefaction were identified. A soil profile from each of these susceptible bridge sites was then subjected to randomly assigned bedrock motions, and an Arias intensity liquefaction analysis was carried out. From these analyses, a fragility curve for the potentially liquefiable wall pier supported bridge sites was produced. Overall results of this study indicate that southern Illinois wall pier supported bridges are moderately vulnerable to structural damage in a 2% probability of exceedance in 50 year earthquake, and in some cases they could also be highly vulnerable to on‐site liquefaction events. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

8.
王德俊 《华南地震》2019,39(3):89-94
快速评估不规则公路桥梁的地震动参数为桥梁地震响应分析、桥梁安全性设计提供科学依据。研究一种快速、有效的不规则公路桥梁地震动参数评估技术,以C形不规则公路桥梁为原型设计振动台与公路桥梁模型,选取Imperial Valley波作为地震动输入,采用加速度传感器、位移传感器采集桥梁加速度与位移数据;结合已知地震动数据计算地震动持续时长参数,优化衰减模型获取精确的地表峰值加速度参数。分析地表峰值加速度与其他地震动参数关系可知,地表峰值加速度与损坏概率成正比,桥梁结构发生损坏的概率在50%以下;震级越大、震中距越小、地表峰值加速度越大。  相似文献   

9.
A performance-based adaptive methodology for the seismic assessment of highway bridges is proposed. The proposed methodology is based on an Inverse (I), Adaptive (A) application of the Capacity Spectrum Method (CSM), with the capacity curve of the bridge derived through a Displacement-based Adaptive Pushover (DAP) analysis. For this reason, the acronym IACSM is used to identify the proposed methodology. A number of Performance Levels (PLs), for which the seismic vulnerability and seismic risk of the bridge shall be evaluated, are identified. Each PL is associated to a number of Damage States (DSs) of the critical members of the bridge (piers, abutments, joints and bearing devices). The IACSM provides the earthquake intensity level (PGA) corresponding to the attainment of the selected DSs, using over-damped elastic response spectra as demand curves. The seismic vulnerability of the bridge is described by means of fragility curves, derived based on the PGA values associated to each DS. The seismic risk of the bridge is evaluated as convolution integral of the product between the fragility curves and the seismic hazard curve of the bridge site. In this paper, the key aspects and basic assumptions of the proposed methodology are presented first. The IACSM is then applied to nine existing simply supported deck bridges, characterized by different types of piers and bearing devices. Finally, the IACSM predictions are compared with the results of nonlinear response time-history analysis, carried out using a set of seven ground motions scaled to the expected PGA values.  相似文献   

10.
In recent earthquakes, a large number of reinforced concrete （RC） bridges were severely damaged due to mixed flexure-shear failure modes of the bridge piers. An integrated experimental and finite element （FE） analysis study is described in this paper to study the seismic performance of the bridge piers that failed in flexure-shear modes. In the first part, a nonlinear cyclic loading test on six RC bridge piers with circular cross sections is carried out experimentally. The damage states, ductility and energy dissipation parameters, stiffness degradation and shear strength of the piers are studied and compared with each other. The experimental results suggest that all the piers exhibit stable flexural response at displacement ductilities up to four before exhibiting brittle shear failure. The ultimate performance of the piers is dominated by shear capacity due to significant shear cracking, and in some cases, rupturing of spiral bars. In the second part, modeling approaches describing the hysteretic behavior of the piers are investigated by using ANSYS software. A set of models with different parameters is selected and evaluated through comparison with experimental results. The influences of the shear retention coefficients between concrete cracks, the Bauschinger effect in longitudinal reinforcement, the bond-slip relationship between the longitudinal reinforcement and the concrete and the concrete failure surface on the simulated hysteretic curves are discussed. Then, a modified analysis model is presented and its accuracy is verified by comparing the simulated results with experimental ones. This research uses models available in commercial FE codes and is intended for researchers and engineers interested in using ANSYS software to predict the hysteretic behavior of reinforced concrete structures.  相似文献   

11.
Highway bridges are essential structures in the transportation system of any country in the world. Many highway bridges are reinforced concrete (RC) bridges that were constructed before the 1980s, prior to current seismic regulation codes. The continuous modification of regulation codes makes it necessary to evaluate structures, and in many cases, existing bridges require interventions to increase their seismic capacity. Among the different techniques used to improve bridge capacity, encasing the columns with RC jackets increases the strength and stiffness of the substructure. RC jacketing increases the column cross sections, improves the seismic capacity and reduces the seismic vulnerability of the bridge substructures. This work presents a parametric study to assess the expected demands of seismically deficient medium length highway bridges retrofitted with RC jacketing aimed at determining the best jacket parameters. A suite of twenty strong ground motions, recorded from a subduction seismic source close to the Pacific Coast in Mexico, was selected to characterize the seismic demand. The bridge superstructures are simply supported with five 30 m long spans for a total length of 150 m. The bridge models have five possible pier heights of 5, 10, 15 20 and 25 m and three different jacket thicknesses and steel ratios. Pushover analyses and capacity spectra of the family of accelerograms allow for the determination of the pier demands by obtaining the performance point as the intersection of the capacity and demand curves. The results allow for the determination of the influence of each parameter on the expected seismic behavior of the bridge models, with the aim of selecting the most suitable jacket characteristics to improve the seismic bridge performance.  相似文献   

12.
Bridge fragility curves, which express the probability of a bridge reaching a certain damage state for a given ground motion parameter, play an important role in the overall seismic risk assessment of a transportation network. Current analytical methodologies for generating bridge fragility curves do not adequately account for all major contributing bridge components. Studies have shown that for some bridge types, neglecting to account for all of these components can lead to a misrepresentation of the bridges' overall fragilities. In this study, an expanded methodology for the generation of analytical fragility curves for highway bridges is presented. This methodology considers the contribution of the major components of the bridge, such as the columns, bearings and abutments, to its overall bridge system fragility. In particular, this methodology utilizes probability tools to directly estimate the bridge system fragility from the individual component fragilities. This is illustrated using a bridge whose construction and configuration are typical to the Central and Southeastern United States and the results are presented and discussed herein. This study shows that the bridge as a system is more fragile than any one of the individual components. Assuming that the columns represent the entire bridge system can result in errors as large as 50% at higher damage states. This provides support to the assertion that multiple bridge components should be considered in the development of bridge fragility curves. The findings also show that estimation of the bridge fragilities by their first‐order bounds could result in errors of up to 40%. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

13.
The convex model approach is applied to derive the robust seismic fragility curves of a five-span isolated continuous girder bridge with lead rubber bearings (LRB) in China. The uncertainty of structure parameters (the yield force and the post-yield stiffness of LRB, the yield strength of steel bars, etc.) are considered in the convex model, and the uncertainty of earthquake ground motions is also taken into account by selecting 40 earthquake excitations of peak ground acceleration magnitudes ranging from 0.125 to 1.126 g. A 3-D finite element model is employed using the software package OpenSees by considering the nonlinearity in the bridge piers and the isolation bearings. Section ductility of piers and shearing strain isolation bearings are treated as damage indices. The cloud method and convex model approach are used to construct the seismic fragility curves of the bridge components (LRB and bridge piers) and the bridge system, respectively. The numerical results indicate that seismic fragility of the bridge system and bridge components will be underestimated without considering the uncertainty of structural parameters. Therefore, the failure probability P f,max had better be served as the seismic fragility, especially, the fragility of the bridge system is largely dictated by the fragility of LRB. Finally, the probabilistic seismic performance evaluation of the bridge is carried out according to the structural seismic risk estimate method.  相似文献   

14.
Modern highway bridges in Illinois are often installed with economical elastomeric bearings that allow for thermal movement of the superstructure, and steel fixed bearings and transverse retainers that prevent excessive movement from service‐level loadings. In the event of an earthquake, the bearing system has the potential to provide a quasi‐isolated response where failure of sacrificial elements and sliding of the bearings can cause a period elongation and reduce or cap the force demands on the substructure. A computational model that has been calibrated for the expected nonlinear behaviors is used to carry out a parametric study to evaluate quasi‐isolated bridge behavior. The study investigates different superstructure types, substructure types, substructure heights, foundation types, and elastomeric bearing types. Overall, only a few bridge variants were noted to unseat for design‐level seismic input in the New Madrid Seismic Zone, indicating that most structures in Illinois would not experience severe damage during their typical design life. However, Type II bearing systems, which consist of an elastomeric bearing and a flat PTFE slider, would in some cases result in critical damage from unseating at moderate and high seismic input. The sequence of damage for many bridge cases indicates yielding of piers at low‐level seismic input. This is caused by the high strength of the fixed bearing element, which justifies further calibration of the quasi‐isolation design approach. Finally, the type of ground motion, pier height, and bearing type were noted to have significant influence on the global bridge response. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

15.
考虑高强钢筋、ECC等高性能材料在桥梁工程中的推广应用,针对普通钢筋混凝土桥墩抗震性能相对较差的情况,研究高强钢筋ECC-RC复合桥墩的桥梁抗震性能。通过OpenSees平台建立普通RC桥墩桥梁、ECC-RC复合桥墩桥梁及高强钢筋ECC-RC复合桥墩桥梁非线性有限元模型,采用增量动力法和"能力需求比"分析方法建立桥梁各构件及系统的地震易损性曲线,探讨高强钢筋及ECC对桥梁抗震性能的影响。研究表明:ECC-RC、高强钢筋ECC-RC复合桥墩及其桥梁系统的地震易损性均有改善,且高强钢筋ECC的改善效果更显著,高强钢筋ECC-RC复合桥墩支座的地震易损性有所降低,高强钢筋及ECC的应用有助于提高桥墩和桥梁系统抗震性能和安全性,特别是在中震及大震作用下这一现象更加明显。  相似文献   

16.
Damage investigation of small to medium-span highway bridges in Wenchuan earthquake revealed that typical damage of these bridges included: sliding between laminated-rubber bearings and bridge girders, concrete shear keys failure, excessive girder displacements and even span collapse. However, the bearing sliding could actually act as a seismic isolation for piers, and hence, damage to piers for these bridges was minor during the earthquake. Based on this concept, an innovative solation system for highway bridges with laminated-rubber bearings is developed. The system is comprised of typical laminated-rubber bearings and steel dampers. Bearing sliding is allowed during an earthquake to limit the seismic forces transmitting to piers, and steel dampers are applied to restrict the bearing displacements through hysteretic energy dissipation. As a major part of this research, a quarter-scale, two-span bridge model was constructed and tested on the shake tables to evaluate the performance of this isolation system. The bridge model was subjected to a Northridge and an artificial ground motion in transverse direction. Moreover, numerical analyses were conducted to investigate the seismic performance of the bridge model. Besides the test bridge model, a benchmark model with the superstructure fixed to the substructure in transverse direction was also included in the numerical analyses. Both the experimental and the numerical results showed high effectiveness of this proposed isolation system in the bridge model. The system was found to effectively control the pier-girder relative displacements, and simultaneously, protect the piers from severe damage. Numerical analyses also validated that the existing finite element methods are adequate to estimate the seismic response of bridges with this isolation system.  相似文献   

17.
The scope of this study is to investigate the effect of the direction of seismic excitation on the fragility of an already constructed, 99‐m‐long, three‐span highway overpass. First, the investigation is performed at a component level, quantifying the sensitivity of local damage modes of individual bridge components (namely, piers, bearings, abutments, and footings) to the direction of earthquake excitation. The global vulnerability at the system level is then assessed for a given angle of incidence of the earthquake ground motion to provide a single‐angle, multi‐damage probabilistic estimate of the bridge overall performance. A multi‐angle, multi‐damage, vulnerability assessment methodology is then followed, assuming uniform distribution for the angle of incidence of seismic waves with respect to the bridge axis. The above three levels of investigation highlight that the directivity of ground motion excitation may have a significant impact on the fragility of the individual bridge components, which shall not be a priori neglected. Most importantly, depending on the assumptions made for the component to the system level transition, this local sensitivity is often suppressed. It may be therefore necessary, based on the ultimate purpose of the vulnerability or the life cycle analysis, to obtain a comprehensive insight on the multiple damage potential of all individual structural and foundation components under multi‐angle excitation, to quantify the statistical correlation among the distinct damage modes and to identify the components that are both most critical and sensitive to the direction of ground motion and carefully define their limit states which control the predicted bridge fragility. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

18.
Loss ratio, which is the ratio of the repair cost to the total replacement cost, is an effective parameter for representing structural and nonstructural damage caused by earthquakes. A probabilistic loss estimation framework is first presented that directly relates hazard to response and hence to losses. A key feature of the loss estimation approach is the determination of losses without need for customary fragility curves. Relationships between intensity measures and engineering demand parameters are used to define the demand model. An empirically calibrated loss model in the form of a power curve with upper and lower cut‐offs is used in conjunction with the demand model to estimate loss ratios. Loss ratios for each of the damage states take into account epistemic uncertainty and an effect on price surge following a major hazardous event. The loss model is calibrated and validated for bridges designed based on the prevailing Caltrans, Japan, and New Zealand standards. The loss model is then transformed to provide a composite seismic hazard–loss relationship that is used to estimate the expected annual loss for structures. The closed‐form four‐step stochastic loss estimation model is applied to the bridges designed for ductility. Results of these ductile designs are compared to a bridge detailed to an emerging damage avoidance design philosophy. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

19.
The seismic performance of timber bridge substructures is not well established, particularly when compared to concrete highway bridges. This paper presents a dual experimental‐computational modelling program to investigate the seismic behaviour of typical braced timber bridge pile bents. For this purpose, a prototype timber bridge was used to develop a near‐full‐size physical model that was used for shaking table experiments and quasi‐static reversed cyclic loading tests on the laboratory strong‐floor. A non‐linear force‐displacement computational modelling study was also undertaken as a companion effort to the experimental investigation. On the basis of the experimental study, seismic vulnerability analysis was conducted for this kind of timber bridge principally with shaking in the transverse direction. In this analysis, a simplified fundamental mechanics‐based approach was employed from which fragility curves were derived. The study showed that braced timber pile bents have considerable strength and deformability capability. Nevertheless, they are not immune from earthquake damage. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

20.
After the occurrence of various destructive earthquakes in Japan, extensive efforts have been made to improve the seismic performance of bridges. Although improvements to the ductile capacities of reinforced concrete (RC) bridge piers have been developed over the past few decades, seismic resilience has not been adequately ensured. Simple ductile structures are not robust and exhibit a certain level of damage under extremely strong earthquakes, leading to large residual displacements and higher repair costs, which incur in societies with less-effective disaster response and recovery measures. To ensure the seismic resilience of bridges, it is necessary to continue developing the seismic design methodology of RC bridges by exploring new concepts while avoiding the use of expensive materials. Therefore, to maximize the postevent operability, a novel RC bridge pier with a low-cost sliding pendulum system is proposed. The seismic force is reduced as the upper component moves along a concave sliding surface atop the lower component of the RC bridge pier. No replaceable seismic devices are included to lengthen the natural period; only conventional concrete and steel are used to achieve low-cost design solutions. The seismic performance was evaluated through unidirectional shaking table tests. The experimental results demonstrated a reduction in the shear force transmitted to the substructure, and the residual displacement decreased by establishing an adequate radius of the sliding surface. Finally, a nonlinear dynamic analysis was performed to estimate the seismic response of the proposed RC bridge pier.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号