共查询到19条相似文献,搜索用时 578 毫秒
1.
本研究提出了一种用于检测海水中锌离子(Zn2+)含量的电化学检测方法。该方法首先应用水热法合成SiO2@PDA-Sb复合材料,然后将该复合材料修饰到玻碳电极上制备SiO2@PDA-Sb-Nafion/GCE,利用差分脉冲阳极溶出伏安法(DPASV)对珠江口海水水样中Zn2+进行测定。研究结果表明,Zn2+在SiO2@PDA-Sb-Nafion/GCE上具有较强的溶出峰。在最优条件下,SiO2@PDA-Sb-Nafion/GCE对Zn2+浓度在1~1 000 nmol/L范围内可实现灵敏、准确的检测,Zn2+的检测出限为0.71 nmol/L。加标回收率实验显示Zn2+加标回收率为93.19%~100.12%,表明该方法可应用于现场海水样品Zn2+测定。本方法具有电极制作简单、稳定性和抗干扰性良好,能够提高现有测定方法的检测限和精确度,在现场海水检测痕量Zn2+具有较好的应用前景。 相似文献
2.
3.
4.
5.
在纯净空气与H2O/ CO2污染空气来流对比试验结果基础上,采用数值计算方法和化学动力学方法,研究了H2O和CO2污染组分对煤油燃料超声速燃烧的影响,获得了试验手段难以得到的燃烧室流场参数和性能数据。完成了相应的煤油燃料超声速燃烧室二维数值计算,其中匹配了进口总温、总压、马赫数、氧气摩尔分数和工作当量油气比。将数值计算结果与相应试验测量值进行了对比分析,并结合燃烧室流场数据、性能参数分析了H2O和CO2污染的动力学影响、以及对燃烧室性能的影响。研究表明:(1)数值计算结果与实验测量值总体上吻合,两种手段均体现了纯净空气来流时不同煤油当量油气比的燃烧室性能,并反映了一致的“污染效应”影响趋势;(2) H2O污染、H2O+ CO2污染的存在降低了煤油燃料超声速燃烧室性能,体现在燃烧诱导压升、燃烧效率、流向冲量增量的下降,而且随着污染组分含量的增加,燃烧室性能下降越加显著。 相似文献
6.
减薄CdS窗口层是提高CdS/CdTe太阳电池转换效率的有效途径之一,减薄窗口层会对器件造成不利的影响,因此在减薄了的窗口层与前电极之间引入过渡层非常必要.利用反应磁控溅射法在前电极SnO2:F薄膜衬底上制备未掺杂的SnO2薄膜形成过渡层,并将其在N2/O2=4 ∶1,550 ℃环境进行了30 min热处理,利用原子力显微镜、X射线衍射仪、紫外分光光度计对复合薄膜热处理前后的形貌、结构、光学性能进行了表征,同时分析了复 相似文献
7.
为揭示赤点石斑鱼精子的超微结构及环境因子对其精子活力的影响,利用扫描电镜和透射电镜观察赤点石斑鱼精子的超微结构,设置不同梯度的温度、盐度、pH值及不同浓度的NaCl、KCl、CaCl2、MgCl2、EDTANa2溶液,探究这些因子对赤点石斑鱼精子活力的影响。结果表明:赤点石斑鱼成熟精子的结构特点是细胞核圆形或卵圆形,核内染色质致密,没有核泡(核空隙)。精子尾部细长,横切面为典型的"9+2"微管结构。温度、盐度、pH值等环境因子对精子活力的影响表明,精子活力的适宜温度范围为23~31℃,27.5℃时精子寿命最长为37min;适宜的盐度范围为15~35,盐度15时精子寿命最长为50min;适宜的pH范围为7~9,pH为9时精子的运动时间最长为33min。赤点石斑鱼精子在EDTANa2溶液中呈抑制状态,在400~700 mmol/L的NaCl溶液、400~600mmol/L的KCl溶液和500 mmol/L的CaCl2溶液中精子均具有较好的活动能力。在MgCl2溶液中赤点石斑鱼精子的活动能力不佳。赤点石斑鱼精子的最适温度范围与繁殖季节的最适水温范围符合,适宜盐度范围较广,对pH值的变化适应性较强。赤点石斑鱼精子在NaCl、KCl、CaCl2溶液中活力较佳,在MgCl2溶液和EDTANa2溶液中呈抑制状态。 相似文献
8.
9.
利用固相反应法制备了Bi0.5Ca0.5Mn1-xCoxO3(0≤x≤0.12)系列多晶样品.研究了Co掺杂对Bi0.5Ca0.5MnO3电荷有序的影响.结果表明,Co掺杂导致电荷有序相逐渐融化、铁磁相互作用的增强;当x≥0.08时,电荷有序转变峰完全消失,但残留的反铁磁电荷有 相似文献
10.
11.
12.
13.
14.
采用化学沉淀法成功制备了Cu2+/SnO2复合纳米光催化剂,采用XRD、SEM等测试手段对复合纳米光催化剂的粒径、形态等进行表征。在紫外光条件下,分别改变催化剂掺杂比、催化剂煅烧温度、催化剂投加量、柴油初始含量和光照时间等单因素,探究不同条件对Cu2+/SnO2复合纳米光催化剂降解海洋柴油污染物的影响。结果表明,自制复合纳米光催化剂可以有效降解海水中的柴油污染物,在紫外光作用下,于400℃下煅烧Cu/Sn掺杂比为0. 03的Cu2+/SnO2复合纳米光催化剂、投加量为0. 2 g/dm3、柴油初始含量为0. 15 g/dm3、H2O2溶液含量为0. 2 g/dm3、溶液的p H为7、光照时间3 h时效果最好,海水中柴油的去除率最高,达到86. 98%。Cu2+/SnO2复合纳米光催化剂用聚丙烯纳米球负载后可以实际应用于海洋中,便于回收。 相似文献
15.
More than 14,000 measurements of surface water xCO2 were obtained during two cruises, 3 weeks apart in June 2000, along 155°E between 34 and 44°N in the western North Pacific Ocean. Based on the distributions of salinity and sea surface temperature (SST), the region has been divided into 6 subregions; Oyashio, Oyashio front, Transition, Kuroshio front, and Kuroshio extension I and II zones, from north to south. The surface waters were always undersaturated with respect to atmospheric CO2. The Oyashio water was the least undersaturated: its xCO2 decreased slightly by 7 ppm, while SST increased by 2°C. The xCO2 normalized to a constant temperature decreased considerably. In the two frontal zones, a large drawdown of 30–40 ppm was observed after 18–19 days. In the Kuroshio extension zones, the xCO2 increased, but the normalized xCO2 decreased considerably. The Transition zone water may be somewhat affected by mixing with the subsurface water, as indicated by the smallest SST rise, an undecreased PO4 concentration, and a colder and less stable surface layer than the Oyashio front water. As the uncertainty derived from the air-sea CO2 flux was not large, the xCO2 data allowed us to calculate the net biological productivity. The productivities around 60 mmol C m−2d−1 outside the Transition zone indicate that the northwestern North Pacific, especially the two frontal zones, can be regarded as one of the most productive oceans in the world. 相似文献
16.
This paper evaluates the simultaneous measurement of dissolved gases (CO2 and O2/Ar ratios) by membrane inlet mass spectrometry (MIMS) along the 180° meridian in the Southern Ocean. The calibration of pCO2 measurements by MIMS is reported for the first time using two independent methods of temperature correction. Multiple calibrations and method comparison exercises conducted in the Southern Ocean between New Zealand and the Ross Sea showed that the MIMS method provides pCO2 measurements that are consistent with those obtained by standard techniques (i.e. headspace equilibrator equipped with a Li–Cor NDIR analyser). The overall MIMS accuracy compared to Li–Cor measurements was 0.8 μatm. The O2/Ar ratio measurements were calibrated with air-equilibrated seawater standards stored at constant temperature (0 ± 1 °C). The reproducibility of the O2/Ar standards was better than 0.07% during the 9 days of transect between New Zealand and the Ross Sea.The high frequency, real-time measurements of dissolved gases with MIMS revealed significant small-scale heterogeneity in the distribution of pCO2 and biologically-induced O2 supersaturation (ΔO2/Ar). North of 65°S several prominent thermal fronts influenced CO2 concentrations, with biological factors also contributing to local variability. In contrast, the spatial variation of pCO2 in the Ross Sea gyre was almost entirely attributed to the biological utilization of CO2, with only small temperature effects. This high productivity region showed a strong inverse relationship between pCO2 and biologically-induced O2 disequilibria (r2 = 0.93). The daily sea air CO2 flux ranged from − 0.2 mmol/m2 in the Northern Sub-Antarctic Front to − 6.4 mmol/m2 on the Ross Sea shelves where the maximum CO2 influx reached values up to − 13.9 mmol/m2. This suggests that the Southern Ocean water (south of 58°S) acts as a seasonal sink for atmospheric CO2 at the time of our field study. 相似文献
17.
An improved model is presented for the calculation of the solubility of carbon dioxide in aqueous solutions containing Na+, K+, Ca2+, Mg2+, Cl−, and SO42− in a wide temperature–pressure–ionic strength range (from 273 to 533 K, from 0 to 2000 bar, and from 0 to 4.5 molality of salts) with experimental accuracy. The improvements over the previous model [Duan, Z. and Sun, R., 2003. An improved model calculating CO2 solubility in pure water and aqueous NaCl solutions from 273 to 533K and from 0 to 2000 bar. Chemical Geology, 193: 257–271] include: (1) By developing a non-iterative equation to replace the original equation of state in the calculation of CO2 fugacity coefficients, the new model is at least twenty times computationally faster and can be easily adapted to numerical reaction-flow simulator for such applications as CO2 sequestration and (2) By fitting to the new solubility data, the new model improved the accuracy below 288 K from 6% to about 3% of uncertainty but still retains the high accuracy of the original model above 288 K. We comprehensively evaluate all experimental CO2 solubility data. Compared with these data, this model not only reproduces all the reliable data used for the parameterization but also predicts the data that were not used in the parameterization. In order to facilitate the application to CO2 sequestration, we also predicted CO2 solubility in seawater at two-phase coexistence (vapor–liquid or liquid–liquid) and at three-phase coexistence (CO2 hydrate–liquid water–vapor CO2 [or liquid CO2]). The improved model is programmed and can be downloaded from the website http://www.geochem-model.org/programs.htm. 相似文献
18.
In this work, the influence of a small-molecule material, tris(8-hydroxyquinoline) aluminum (Alq3), on bulk heterojunction (BHJ) polymer solar cells (PSCs) is investigated in devices based on the blend of poly(2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene) (MEH-PPV) and [6,6]-phenyl-C61-butyric acid methyl ester (PCBM). By doping Alq3 into MEH-PPV:PCBM solution, the number of MEH-PPV excitons can be effectively increased due to the energy transfer from Alq3 to MEH-PPV, which probably induces the increase of photocurrent generated by excitons dissociation. However, the low carrier mobility of Alq3 is detrimental to the efficient charge transport, thereby blocking the charge collection by the respective electrodes. The balance between photon absorption and charge transport in the active layer plays a key role in the performance of PSCs. For the case of 5 wt.% Alq3 doping, the device performance is deteriorated rather than improved as compared with that of the undoped device. On the other hand, we adopt Alq3 as a buffer layer instead of commonly used LiF. All the photovoltaic parameters are improved, yielding an 80% increase in power conversion efficiency (PCE) at the optimum thickness (1 nm) as compared with that of the device without any buffer layer. Even for the 5 wt.% Alq3 doped device, the PCE has a slight enhancement compared with that of the standard device after modification with 1 nm (or 2 nm) thermally evaporated Alq3. The performance deterioration of Alq3-doped devices can be explained by the low solubility of Alq3, which probably deteriorates the bicontinuous D-A network morphology; while the performance improvement of the devices with Alq_3 as a buffer layer is attributed to the increased light harvesting, as well as blocking the hole leakage from MEH-PPV to the aluminum (Al) electrode due to the lower highest occupied molecular orbital (HOMO) level of Alq3 compared with that of MEH-PPV. 相似文献
19.
长江口及邻近海区营养盐结构与限制 总被引:5,自引:0,他引:5
通过研究长江口及邻近海域溶解无机氮(DIN=NO3-+NO2-+NH4+)、磷酸盐(PO43-)、硅酸盐(SiO32-)所表征的营养盐区域结构特征及影响因素,在分析营养盐绝对限制情况的基础上,划分了潜在相对营养限制区域。结果表明,123°E以西近岸表层区域DIN/P比值全年均高于16,而Si/DIN除秋季外基本小于1,显示出长江冲淡水影响下"过量氮"的特征。春夏季河口锋面区(31°~32.5°N,122.5°~124°E)硅藻的大量生长可使DIN/P异常升高和Si/DIN异常降低。秋季研究区域北部DIN/P西低东高且Si/DIN西高东低是由于在高DIN、低PO43-的长江冲淡水影响下,近岸受相对低DIN、高SiO32-的苏北沿岸流南下入侵影响而被分割而成。冬季长江口门东北部存在的高DIN/P和低Si/DIN区则主要由于寡营养盐的黑潮水深入陆架,向东北输送的部分长江冲淡水和增强的苏北沿岸流共同作用造成DIN升高所致。利用Redfield比值进行了不同站位表层潜在相对营养限制情况的区分。近岸123°E以西受高DIN、SiO32-长江冲淡水影响,四季多呈现PO43-潜在相对限制,而在春夏季由于浮游植物的大量吸收PO43-,造成局部PO43-绝对限制及潜在相对限制。春夏季氮限(DIN潜在相对限制)一般发生在外海部分站位,但较为零散。秋季除了东南外海大部分站位外,受苏北沿岸流影响在长江口北部近岸也存在氮限。随着低DIN/P的黑潮表层水(KSW)的入侵加强,冬季外海氮限站位增多。硅限(SiO32-潜在相对限制)在夏季发生在赤潮高发区,而冬季南部存在较多硅限站位表明KSW中SiO32-相对较为缺乏。 相似文献