首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到19条相似文献，搜索用时 468 毫秒
1.
试验场地内现场调查发现固结致密砂岩层中存在一个倾角47°的倾斜裂隙含水层。为了研究倾角所产生的影响,通过建立倾斜裂隙微水试验的双重孔隙介质理论模型,利用理论和现场试验数据分析方法,讨论倾角对水文地质参数推估的影响。结果表明:低渗透条件下,倾角越大非振荡水位恢复速度越快;高渗透条件下,倾角越大振荡水位振幅越大。裂隙渗透系数越小,母岩贮水率越大,双重孔隙介质特征参数越大时,倾角上限越小,倾角影响越明显。根据该结论确定出模型适用于倾角大于30°的裂隙含水层。忽略倾角会导致裂隙渗透系数估值偏高,母岩贮水率估值偏低,双重孔隙介质特征参数估值偏低。  相似文献   

2.
为评价振荡试验在获取倾斜承压含水层水文地质参数过程中含水层倾角对计算结果的影响,基于Kipp模型推导了考虑承压含水层倾角的振荡试验解析解模型。倾斜承压含水层量纲一贮水系数和量纲一导水系数不变条件下,测试井-含水层系统的量纲一阻尼系数随着倾角的增加而增加。修正模型计算的量纲一阻尼系数与Kipp模型计算的量纲一阻尼系数偏差10%以上时,必须考虑倾角的影响并且承压含水层倾角对水头响应曲线造成影响临界角度约为34°。修正模型和Kipp模型对现场振荡试验水头响应曲线分析结果的差异表明,忽略含水层倾角会对倾斜承压含水层导水系数和贮水系数的计算结果产生较大误差。  相似文献   

3.
水文地质参数是衡量含水层富水性的重要指标,其空间分布特征的准确推算,对于矿井突水灾害预报与防治具有积极意义。传统放水试验分析方法得到的是等效水文地质参数,不能准确刻画含水层的空间异质性。基于随时间变化的水头数据与水文地质参数的互相关分析,将水力层析法应用在陕西榆林柠条塔煤矿井下承压含水层叠加放水试验数据分析中,获得了研究区水文地质参数的空间分布特征。结果表明,工作面南北富水性差异大,涌水区位于强导水带上;从涌水区往北,导水系数和储水系数整体上逐渐减小;南部导水系数和储水系数均较大,属于富水异常区。研究表明,水力层析法是一种有效的非均质含水层参数识别的新技术,将井下放水视为针对含水层的刺激源,结合水头与水文地质参数的互相关分析,联合多个观测孔的水头响应数据,反演刻画研究区域的主要地质结构特征。在矿井水文地质条件分析中,预先采用水力层析法识别富水异常区域,可以有效降低突水事故风险。  相似文献   

4.
地面沉降主要由深层地下水开采造成,含水层的压缩释水是深层地下水开采量主要构成来源,同时随其压缩变形孔隙比减小造成储水系数、渗透系数的减小,对弱透水层非弹性释水量、越流补给量造成影响。地面沉降过程中的水文地质参数非线性变化及对承压含水层系统的反馈作用也成为水文地质领域的前沿问题。为对地下水开采量、沉降量、地质参数变化以及给水能力变化之间的关系做一个较为定量定性的探究,以含水层压缩过程中的物理机制为依据,并基于沧州地区深层承压含水层的地下水位变化过程和水文地质参数,采用数学手段构建储水系数和渗透系数变化的一维非线性沉降模型。模拟结果显示随承压水头下降,储水系数最高可减小77%,含水层系统的给水能力和储水能力会随压缩变形减小50%甚至更多。研究成果为深入认识水文地质参数与应力变化相关关系、科学评价承压含水层地下水储水调节能力有重要借鉴意义。  相似文献   

5.
在滨海地区,地下水水位受潮汐波动影响较大,使得传统的抽水试验、水位回复试验等方法确定含水层参数存在困难且花费较大。通过对广西北海市滨海含水层地下水位动态资料进行分析,发现其上升段和下降段是不对称的。基于海岸带承压含水层正弦潮汐波的传播理论,提出了确定含水层参数的分段法,并与振幅衰减法和滞后时间法进行对比,各种方法求出的储水系数与导水系数之比(S/T)很接近,说明分段法是有效的。对于北海市滨海含水层,上升段求出的S/T值比下降段要大,其成因机理还有待进一步分析。  相似文献   

6.
在沿海地区,尤其是围海造陆工程形成的陆域地区地下水水位受潮汐影响较大,使传统水文地质试验求取含水层参数存在较大误差。因此通过合理概化地下水在潮汐作用下运动规律,建立数学模型,推导解析公式求取沿海含水层参数具有重要意义。分析天津滨海新区两处观测孔地下水位及潮汐波动特征,在滞后时间不明显的情况下,利用观测孔水位变幅数据计算了含水层水头扩散系数,并根据承压含水层储水系数经验值进一步获得含水层渗透系数。通过两个观测孔分别计算,对比计算结果互相验证发现,该方法取得了令人满意的结果。利用地下水潮汐效应计算含水层参数可以广泛应用于沿海地区水文地质工作中。  相似文献   

7.
井-含水层系统水文地质参数是地下水/含水层水流模型中的关键参数,这些参数通常通过室内实验、野外试验和模型反演获取。基于新10井水位对远场地震的同震响应,通过频谱法分析了该井水震波与地震波的相关性,提出了一种利用水震波信号(主要是瑞利波引起)反演获取承压含水层水文地质参数的方法。结果表明新10井水震波与地震波在变化形态、频谱特征上均具有很好的一致性,估算得到的新10井-含水层系统的储水系数值为1.33×10~(-5)~1.64×10~(-5),渗透系数值为57~87 m/d。提出的承压井-含水层系统水文参数估算法具有很好的实用性,可为地下水管理、地震机理分析等提供一种新的技术方法。  相似文献   

8.
煤矿疏降水工程需要以含水层组参数为基础进行合理布设。结合某矿区内的非稳定流双孔干扰抽水试验,在无观测孔情况下,根据抽水井资料分别利用通用直线法、水位恢复法、解析法及优化拟合四种方法确定承压含水层的导水系数,并利用后期疏降水孔资料对上述方法进行验证,结果表明通用直线法和水位恢复法计算结果可靠。  相似文献   

9.
梯度法在水文地质参数估值中的应用   总被引：7，自引：1，他引：7  
根据地下水的抽水试验求含水层的导水系数和储水系数时,传统的计算方法是配线法和直线图解法。这两种方法比较繁琐,且人为误差较大。本文运用数学模型的最优化方法即梯度法,并借助于计算机编程,实现了水文地质参数的数值求解。计算结果能消除人为误差,准确反映含水层的参数特征。  相似文献   

10.
综合考虑了海底淤泥层的弹性储水系数、海潮荷载效应和渗透性,对海底露头处具有淤泥层的滨海承压含水层系统中海潮引起的水头波动进行分析,给出了相应的数学模型,并推导出其解析解,讨论了淤泥层弹性储水对于水头波动的影响.分析表明,当淤泥层的厚度或弹性储水系数较小时,或者其渗透性较好时,可以忽略其弹性储水效应,从而把整个淤泥层简化为第三类边界条件来处理.文章还考虑了承压含水层和淤泥层中可能存在的垂向流动,对垂向剖面二维地下水流动方程进行了数值模拟,将二维数值解与忽略垂向流动的一维解析解进行了比较,结果表明该含水层系统的垂向流动是可以被忽略的.  相似文献   

11.
A method to estimate aquifer thickness and hydraulic conductivity has been developed, consisting of multiple pumping tests. The method requires short-duration pumping cycles on an unconfined aquifer with significant seasonal water-table fluctuations. The interpretation of several pumping tests at a site in India under various initial conditions provides information on the change in hydrodynamic parameters in relation to the initial water-table level. The transmissivity linearly decreases compared with the initial water level, suggesting a homogeneous distribution of hydraulic conductivity with depth. The hydraulic conductivity is estimated from the slope of this linear relationship. The extrapolation of the relationship between transmissivity and water level provides an estimate of the aquifer thickness that is in good agreement with geophysical investigations. The hydraulically active part of the aquifer is located in both the shallow weathered and the underlying densely fractured zones of the crystalline basement. However, no significant relationship is found between the aquifer storage coefficient and initial water level. This new method contributes to filling the methodological gap between single pumping tests and hydraulic tomography, in providing information on the variation of the global transmissivity according to depth. It can be applied to any unconfined aquifer experiencing large seasonal water-table fluctuations and short pumping cycles.  相似文献   

12.
陈晨  文章  梁杏  李霞 《地球科学》2017,42(5):727-733
含水层参数对于定性分析区域地下水资源评价、数值模拟及预报、开发利用与保护及科学管理具有重要意义,而江汉平原水文地质参数求解的研究却相对较少.2015年江汉平原1:50 000水文地质调查项目完成杨林尾图幅与陆溪口图幅,选择杨林尾图幅和陆溪口图幅中的4个代表性钻孔,分别做了3组抽水试验和一组压水试验.对抽水数据使用Dupuit公式法结合抽水稳定阶段数据求解含水层参数,同时利用Aquifer Test软件中Theis标准曲线法、直线图解法对抽水试验中非稳定条件下抽水数据对含水层参数求解,得到孔隙水含水层渗透系数及弹性给水度;利用压水试验工程规范求解基岩裂隙含水层的渗透系数.探讨了利用非稳定抽水试验条件下求解含水层参数方法的可行性及该方法的优势.计算结果表明:杨林尾镇浅层(20.2~64.55 m)含水层渗透系数为0.075 m/d,弹性给水度为5.8×10-2;深层(138~160 m)含水层渗透系数为9.89 m/d,弹性给水度为2.3×10-5;陆溪口镇浅层(19.4~36.4 m)含水层渗透系数1.26 m/d,弹性给水度为1.1×10-1;基岩渗透系数为0.012 m/d.通过结果对比分析发现对于单孔非稳定抽水试验,对前期水位降深数据筛选分析,同样可以利用非稳定井流理论反演含水层参数,结果比较可靠.   相似文献   

13.
An electrical resistivity method has been used to determine aquifer parameters in the Ganga-Yamuna interfluve in northern India. An existing relationship between the geoelectrical and hydraulic parameters has been modified for the case of an anisotropic aquifer. The hydrogeological framework in the upper part of the Ganga-Yamuna interfluve is evaluated by using existing relationships between hydraulic parameters and geoelectrical parameters for alluvial aquifers. On the basis of aquifer geometry, the area has been divided into two hydraulic units: the western Yamuna flood plain and the Ganga flood plain towards the east. The resistivity data collected in parts of the study area are first interpreted in terms of true resistivity and thicknesses of subsurface layers. The electrical parameters (resistivity and thicknesses) are subsequently correlated with the available pumping test data. Distinct correlations between transmissivity and modified transverse resistance are obtained for the two hydraulic units. A four-parameter model consisting of hydraulic conductivity, modified longitudinal resistivity, modified transverse resistance and hydraulic anisotropy is presented for the anisotropic aquifer underlain by conductive fine grained sediments. The model has been validated at a number of locations, where aquifer parameters are known from pumping test data.  相似文献   

14.
Phu tok Aquifer is the most productive water bearing rock in the Northeastern region of Thailand. Generally, well drilled in this aquifer yields approximately 20–50 m3/hr with some wells yield over 150 m3/hr. This aquifer characterized both unconfined and confined aquifer. Data collected from core sampling and TV bore hole show water bearing fractures in the fine grained massive sandstone intercalated with thin shale layers. These intermittently bedding plane fracture zones were found vertically at 60-65 and 95-110 m below ground surface. Three directions of vertically fractures were also found at 103-104 m in the test well with underlain densely sandstone until 120 m of depth. Wells drilled to 60-70 m fractures at the area where surface elevation between 150 and 170 m above mean sea level were artesian well with rising water about 1-3 m. Natural discharge rate from 2-5 inches of diameter casing is 5-10 m3/hr. Fractures at 90-110 m yield 150 m3/hr through 6 inch casing well with 5-6 m of risen water above the ground. It is found from pumping test of Phu Tok Aquifer that hydraulic conductivity of unconfined aquifer at shallower than 50 m is 0.005-17 m/d. Transmissivity and storage coefficient are 0.05-20 m2/d and 7×10-3-0.725 respectively. The confined aquifer at depth not exceed 90 m has hydraulic conductivity value of 0.2-10 m/d while transmissivity and storage coefficient are 3.19-150 m2/d and 1×10-10-1.6×10-2. Another confined aquifer at 90-120 m of depth have hydraulic conductivity value of 0.08-15 m/d and transmissivity and storage coefficient values of 1.7-178 m2/d and 4×10-7-4.5×10-3 respectively.  相似文献   

15.
Natural or artificial hydraulic connections between a granular aquifer in contact with a fractured-rock aquifer can have significant physical and chemical impacts at both a local and a regional scale. In this study, numerical simulations are conducted in order to illustrate the hydrogeological consequences of such hydraulic relationships. The numerical investigation, based on a conceptual model, focuses on the effects of the hydraulic connections when conducting a pumping test in a well that is set into a granular confined aquifer overlying a fractured-rock aquifer which presents a few fractures directly connected to the granular aquifer. It is illustrated that when interpreting the pumping test with the conventional methods consisting of plotting the drawdown versus time, a bias is introduced on the estimation of the transmissivity of the granular aquifer due to groundwater flowing from the fractured-rock aquifer via connecting fractures. However, it is underlined that plotting drawdown log-derivative versus time helps to diagnose the existence of these hydraulic relationships and therefore avoids committing a bias on the transmissivity estimation of the granular aquifer. Numerical simulation results also illustrate that hydraulic connections between the two aquifers can have significant impacts on the hydrogeochemical signature of the granular aquifer under investigation.  相似文献   

16.
李霞  文章  梁杏  马腾  陈晨 《地球科学》2017,42(5):743-750
含水层的水文地质参数是进行地下水资源计算、地下水污染防控等所必需的基础数据,结合数值模拟技术进行含水层参数反演很有必要.按照1:5万水文地质调查规范在江汉平原仙桃市杨林尾镇复兴水厂不同含水层位开展抽水试验,包括深层含水层单孔抽水试验以及浅层含水层中群孔(2孔)抽水试验.对于单孔抽水试验,应用第1类越流系统井流理论进行参数反演;对于群孔抽水试验,推导了特定综合井函数,并利用特定标准曲线匹配法和直线图解法求解了含水层参数.随后利用FEFLOW软件建立了相应数值模型,拟合了含水层参数.结果表明:浅层含水层的渗透系数变化范围为21.66~54.00 m/d,贮水率变化范围为1.28×10-5~8.00×10-4 m-1;深层含水层渗透系数变化范围为1.27~7.00 m/d,贮水率变化范围为3.90×10-6~5.00×10-6 m-1.对于深层承压含水层而言,越流补给量较大.采用数值模拟方法结合抽水试验数据求参,综合考虑了含水层结构,拟合效果好,所得结果更加可靠.   相似文献   

17.
The current study aimed to evaluate hydrogeologically the Nubian sandstone aquifer in El-Bahariya Oasis. It represents the main water-bearing horizon in the study area and consists of continental elastic sediments, mainly sandstone alternating with shale and clays. The general flow lines are directed from SW to NE direction, as detected from the constructed potentiometric head contour map. The piezometric surface reaches 149 m in El-Heiz area at the southern part, while it reaches 90 m at the northern, reflecting higher pressure head of the aquifer in the southern part. The map also illustrates that the southern part is considered as the most promising location for development. The structural elements play an important role in the deposition and distribution of the sedimentary succession of the Nubian sandstone sediments. Consequently, this sedimentary pattern affects the occurrences and movements of the groundwater within the aquifer system. Along the structurally high areas, in the study area, the piezometric head increases, while the reverse is recorded along the structurally low areas. The step-drawdown tests data were carried out by calculating the aquifer loss coefficient (B) and the well loss constant (C). The B values are smaller compared with C values, indicating that the aquifer under pressure has a behavior of leaky aquifer; therefore, it shows hydraulic connection with surrounding formation. The values of well efficiency range from 78.50% to 87.76%. Analysis of 12 pumping test data (constant discharge tests) was carried out in order to calculate the Nubian aquifer hydraulic parameters (transmissivity, hydraulic conductivity, and storage coefficient). The transmissivity values decrease from 3,045 m2/day in the southern part (El-Heiz area) to 236 m2/day in the northeastern part (El-Harra area). Accordingly, the aquifer classified as a high to moderate potentiality. Transmissivity contour map observes gradual increase of transmissivity values from the southern to northeastern direction. This may be due to the increase of shale or clay content in the concerned aquifer in that direction. The storage coefficient values range between 1.04 × 10?4 and 5.22 × 10?3, as obtained from the results of pumping test analysis, which ensure that the Nubian sandstone aquifer is classified as semi-confined to confined aquifer type. The S values show a decrease from southwest to northeast direction as detected from S-map. The hydraulic conductivity values vary from to 0.46 m/day in the northern part to 10.88 m/day in the southern part with an average of 5.67 m/day. According to the classification based on K values, the aquifer is mainly composed of coarse sand.  相似文献   

18.
The estimation and mapping of realistic hydraulic head fields, hence of flow paths, is a major goal of many hydrogeological studies. The most widely used method to obtain reliable head fields is the inverse approach. This approach relies on the numerical approximation of the flow equation and requires specifying boundary conditions and the transmissivity of each grid element. Boundary conditions are often unknown or poorly known, yet they impose a strong signature on the head fields obtained by inverse analysis. A simpler alternative to the inverse approach is the direct kriging of the head field using the measurements obtained at observation wells. The kriging must be modified to incorporate the available information. Use of the dual kriging formalism enables simultaneously estimating the head field, the aquifer mean transmissivity, and the regional hydraulic gradient from head data in steady or transient state conditions. In transient state conditions, an estimate of the storage coefficient can be obtained. We test the approach on simple analytical cases, on synthetic cases with solutions obtained numerically using a finite element flow simulator, and on a real aquifer. For homogeneous aquifers, infinite or bounded, the kriging estimate retrieves the exact solution of the head field, the exact hydrogeological parameters and the flow net. With heterogeneous aquifers, kriging accurately estimates the head field with prediction errors of the same magnitude as typical head measurement errors. The transmissivities are also accurately estimated by kriging. Moreover, if inversion is required, the kriged head along boundaries can be used as realistic boundary conditions for flow simulation.  相似文献   

19.
This paper describes the research carried out in a karst aquifer located in Soria, Spain. The system presents considerable good-quality water resources, yielding a series of springs which constitute a “Natural Monument”. An integral study of the hydrological cycle is presented in order to characterize the hydrodynamic behavior of the aquifer. Research combines conventional geological and hydrogeological approaches with more innovative techniques such as speleo-diving. On the basis of relatively little available data, quantitative results are obtained. These include estimations on porosity, hydraulic conductivity, transmissivity, and groundwater renewal rate and aquifer reserves. A vulnerability assessment is carried out to evaluate the potential effects of overpumping. This is followed by a proposal for sustainable aquifer management. Since aquifers such as the one in this study are frequently found, this methodology could be successfully extrapolated to other cases.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号