首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
As we all know, Eastern Tienshan and Altaid in central Asia accommodate~10mm/a crustal shortening, accounting for 1/4 shortening between India and Eurasia(~40mm/a). A substantial portion of these deformations was absorbed in Altaid in the north through a combination of right-lateral strike-slip and counterclockwise vertical axis rotation of crustal blocks, but how the crustal deformation was accommodated in Eastern Tienshan is still in debate. Based on the field investigation in Jianquanzi, Barkol Tagh and Karlik Tagh in Eastern Tienshan in recent years, we identified a sinistral strike-slip fault system mapped in Eastern Tienshan. From west to east, the Jianquanzi-Tuolaiquan Fault(JTF), South Barkol Basin Fault (SBF) and Central Karliktagh Fault(CKF)constitute the tectonic frame of this large-scale fault system, which plays an important role in adjusting the strain distribution during the process of orogening in Eastern Tienshan in Quaternary even since Ceonozoic era. The fault system displays different late-Quaternary characteristics when its orientation changes with regional tectonic principal stress(NE). Specifically, the EW-trending JTF exhibits sinistral slip with little vertical component which can extend to Xiongkuer segment on EW-NW-trending SBF. The EW-NW SBF displays sinistral slip from east of Luobaoquanto, Barkol County and reverse slip with little horizontal component at east of Barkol County. In easternmost, the WNW-EW trending CKF shows sinistral slip with no obvious vertical motion. This fault system's activity coupled in the orogenic process of easternmost Tienshan, adjusting and accommodating a portion of deformation included in the orogenic process, and in turn we suggest that the deformation associated with range front fault in the orogen root may not be the only decisive way of deformation releasing.  相似文献   

2.
运用地质地貌调查、地球物理勘探和年代测定等方法,对张家口—宣化盆地的四条主要断裂(张家口断裂、万全断裂、洗马林—水泉断裂和洋河断裂)的空间展布特征和活动性进行分析和研究,获得其活动时代、活动速率等参数。研究表明:上述断裂第四纪期间持续活动,以脆性变形为特征;总体上NW向断裂以高角度的正(或逆)倾滑断层为主,NE或NEE向的断裂以高角度的正断层为主;盆地内活动断裂总体来说活动强烈,多处可见断裂正断运动及左旋走滑运动的地质剖面,早更新世以来单条断层的平均垂直活动速率大于0.07~0.30mm/a,总垂直活动速率可能达到1.33mm/a。  相似文献   

3.
Influenced by the far-field effect of India-Eurasia collision, Tianshan Mountains is one of the most intensely deformed and seismically active intracontinental orogenic belts in Cenozoic. The deformation of Tianshan is not only concentrated on its south and north margins, but also on the interior of the orogen. The deformation of the interior of Tianshan is dominated by NW-trending right-lateral strike-slip faults and ENE-trending left-lateral strike-slip faults. Compared with numerous studies on the south and north margins of Tianshan, little work has been done to quantify the slip rates of faults within the Tianshan Mountains. Therefore, it is a significant approach for geologists to understand the current tectonic deformation style of Tianshan Mountains by studying the late Quaternary deformation characteristics of large fault and fold zones extending through the interior of Tianshan. In this paper, we focus on a large near EW trending fault, the Baoertu Fault (BETF) in the interior of Tianshan, which is a large fault in the eastern Tianshan area with apparent features of deformation, and a boundary fault between the central and southern Tianshan. An MS5.0 earthquake event occurred on BETF, which indicates that this fault is still active. In order to understand the kinematics and obtain the late Quaternary slip rate of BETF, we made a detailed research on its late Quaternary kinematic features based on remote sensing interpretation, drone photography, and field geological and geomorphologic survey, the results show that the BETF is of left-lateral strike-slip with thrust component in late Quaternary. In the northwestern Kumishi basin, BETF sinistrally offsets the late Pleistocene piedmont alluvial fans, forming fault scarps and generating sinistral displacement of gullies and geomorphic surfaces. In the bedrock region west of Benbutu village, BETF cuts through the bedrock and forms the trough valley. Besides, a series of drainages or rivers which cross the fault zone and date from late Pleistocene have been left-laterally offset systematically, resulting in a sinistral displacement ranging 0.93~4.53km. By constructing the digital elevation model (DEM) for the three sites of typical deformed morphologic units, we measured the heights of fault scarps and left-lateral displacements of different gullies forming in different times, and the result shows that BEFT is dominated by left-lateral strike-slip with thrust component. We realign the bended channels across the fault at BET01 site and obtain the largest displacement of 67m. And we propose that the abandon age of the deformed fan is about 120ka according to the features of the fan. Based on the offsets of channels at BET01 and the abandon age of deformed fan, we estimate the slip rate of 0.56mm/a since late Quaternary. The Tianshan Mountains is divided into several sub-blocks by large faults within the orogen. The deformation in the interior of Tianshan can be accommodated or absorbed by relative movement or rotation. The relative movement of the two sub-blocks surrounded by Boa Fault, Kaiduhe Fault and BETF is the dominant cause for the left-lateral movement of BETF. The left-lateral strike-slip with reverse component of BETF in late Quaternary not only accommodates the horizontal stain within eastern Tianshan but also absorbs some SN shortening of the crust.  相似文献   

4.
The giant sinistral Altyn Tagh Fault(ATF)is the northern boundary of the Tibetan Plateau. It has been playing important role in adjusting the India-Eurasia collision and the tectonic evolution of the northeastern Tibetan Plateau. Knowledge of the evolution of the ATF can provide comprehensive understanding of the processes and mechanisms of the deformation of the Tibetan Plateau. However, its timing of commencement, amount of displacement and strike-slip rate, as well as the tectonic evolution of the region are still under debate. South of the ATF, there exist a series of oroclinal-like arcuate structures. Knowledge of whether these curved geometries represent original curvatures or the bending of originally straight/aligned geological units has significant tectonic implications for the evolution of the ATF. The Yingxiongling arcuate belt in the western Qaidam Basin and the northern Qaidam marginal thrust belt(NQMTB)north of the Qaidam Basin are the two typical arcuate thrust belts, where the former has a "7-types" structure, and the latter has a reverse "S-type" structure. Successive Cenozoic sediments are well exposed and magnetostratigraphically dated in both belts. Paleomagnetic declination has great advantage to reveal vertical-axis rotations of geological bodies since they become magnetized. Recently conducted paleomagnetic rotation studies in different parts of these two thrust belts revealed detailed Cenozoic rotation patterns and magnitudes of the region. By integrating these paleomagnetic rotation results with regional geometric features and lines of geological evidence, we propose that these two arcuate thrust belts were most likely caused by different rotations in different parts of these curvatures, due to the sinistral strike-slip faulting along the ATF, rather than originally curved ones. The Yingxiongling arcuate belt was shaped by the significant counterclockwise(CCW)rotations of its northwestern half(the Akatengnengshan anticline)near the ATF during~16~11Ma BP, while its southeastern half(the Youshashan anticline)had no significant rotations since at least~20Ma BP. The geometry of the NQMTB was developed firstly by remarkable clockwise rotations of its middle part during~33~14Ma BP, and later possibly CCW rotations of its northwestern part during the Middle to Late Miocene, similar to that of the northwestern part of the Yingxiongling arcuate belt. The characteristics of two-stage strike-slip evolution of the ATF since the Early Oligocene were enriched:1)During the Early Oligocene to mid-Miocene, fast strike-slip faulting along the ATF was proposed to accommodate the eastward extrusion of the northern Tibetan Plateau with its sinistral shear confined to the fault itself. While in the NQMTB and farther east area in the Qilian Shan, its sinistral shear was transferred to the interior of the plateau and was accommodated by deformation of differential crustal shortenings and block rotations in these regions. Thus, the displacement along the ATF west of the NQMTB is larger than that east of the NQMTB. 2)Since the mid-late Miocene, sinistral shear of the ATF was widespread distributed within the northern Tibetan Plateau, instead of concentrated to the fault itself. Its sinistral offsets were partially absorbed by the shortening deformation within the Qaidam Basin and the Qilian Shan, leading the offsets along the ATF decreasing to the east. With the sinistral frictional drag of blocks(the Tarim Basin and the Altyn Tagh Range)on the other side during the second stage evolution of the ATF, a transitional zone south of the ATF was likely developed by remarkable CCW rotations during the Middle to Late Miocene, which is probably confined to east of the Tula syncline. Combining the sinistral offsets along the ATF derived from the paleomagnetic rotations during the Early Oligocene to mid-late Miocene and that by piercing points since the Late Miocene, the post Oligocene strike-slip offsets were constrained as at least~350~430km for the reference in the western Qaidam Basin and~380~460km for the reference in the NQMTB, with an average slip rate of at least~10.6~13.9mm/a. The post Early Oligocene offsets are consistent with the widely accepted offsets of~300~500km obtained by piercing point analyses.  相似文献   

5.
The Anninghe fault is one of the significant earthquake-generating fault zones in the Southwest China. Local his-torical record shows that a M≥7 strong earthquake occurred in the year of 1536. On the basis of the detailed air-photographic interpretation and field investigation, we have acquired the following knowledge: 1 The average sinistral strike-slip rate since the Late Pleistocene is about 3~7 mm/a; 2 There is important reverse faulting along the fault zone besides the main left-lateral strike-slip motion, and the shortening rate across the Anninghe fault zone due to the reverse faulting is about 1.7~4.0 mm/a. If the Xianshuihe fault zone is simply partitioned into the Anninghe and Daliangshan faults, we can also get a slip rate of 3~7 mm/a along the Daliangshan fault zone, which is the same as that on the Anninghe fault zone. Moreover, on the basis of our field investigation and the latest knowledge concerning the active tectonics of Tibetan crust, we create a dynamic model for the Anninghe fault zone.  相似文献   

6.
This study provides evidence for post-5 Ma shortening in the transition area between the Dinarides fold-and-thrust belt and the Pannonian Basin and reviews possible earthquake sources for the Banja Luka epicentral area (northern Bosnia and Herzegovina) where the strongest instrumentally recorded earthquake (ML 6.4) occurred on 27 October 1969. Geological, geomorphological and reflection seismic data provide evidence for a contractional reactivation of Late Palaeogene to Middle Miocene normal faults at slip rates below 0.1 mm/a. This reactivation postdates deposition of the youngest sediments in the Pannonian Basin of Pontian age (c. 5 Ma). Fault plane solutions for the main 1969 Banja Luka earthquake (ML 6.4) and its largest foreshock (ML 6.0) indicate reverse faulting along ESE–WNW-striking nodal planes and generally N–S trending pressure axes. The spatial distribution of epicentres and focal depths, analyses of the macroseismic field and fault-plane solutions for several smaller events suggest on-going shortening in the internal Dinarides. Seismic deformation of the upper crust is also associated with strike-slip faults, likely related to the NE–SW trending, sinistral Banja Luka fault. Possibly, this fault transfers contraction between adjacent segments of the Dinarides thrust system. The study area represents the seismically most active region of the Dinarides apart from the Adriatic Sea coast and the bend zone around Zagreb. We propose that on-going thrusting in the internal Dinarides thrust system takes up a portion of the current Adria–Europe convergence.  相似文献   

7.
The two mainstream deformation models of the Tibet plateau are continental escape model and crustal thickening model, the former suggests that the NW-trending Karakoram Fault, Gyaring Co Fault, Beng Co Fault and the Jiali Fault as the Karakoram-Jiali fault zone is the southern border belt and that the dextral strike-slip rate is estimated as up to 10~20mm/yr. However, research results in recent years show that the slip rates along those faults are significantly less than earlier estimates. Taylor et al. (2003)suggest that the conjugate strike-slip faults control the active deformation in the central Tibet. The lack of research on the slip behavior of the NE-trending faults in the central Tibet Plateau constrains our understanding of the central Tibet deformation model. Thus, we choose the NE-direction Qixiang Co Fault located at the north of the Gyaring Co Fault as research object. Based on the interpretation of satellite images, we found several faulted geomorphic sites. Using RTK-GPS ground control point and unmanned aerial vehicle (UAV)topographic surveying, we obtained less than 10cm/pix-resolution digital elevation model (DEM)in the Yaqu town site. We used the LaDiCaoz_v2.1 software to automatically extract the left-lateral offset of the largest gully on the terrace T2 surface, which is (21.3±7.1)m, and the vertical dislocation of the scarp on the terrace T2 surface, which is (0.9±0.1)m. The age of both U-series dating samples on the terrace T2 is (4.98±0.17)ka and (5.98±0.07)ka, respectively. The Holocene left-lateral slip rate along Qixiang Co Fault is (3.56±1.19)mm/a and the vertical slip rate is (0.15±0.02)mm/a. The kinematic characteristics of the sinistral strike-slip with normal slip coincide with the eastward motion of the central Tibet plateau, and its magnitude is in agreement with its conjugate Gyaring Co Fault, suggesting that the deformation pattern of the central Tibetan plateau complies with the conjugate strike-slip faults mode.  相似文献   

8.
断裂晚第四纪滑动速率及现今GPS观测揭示了青藏高原向北扩展与高原边缘隆升的运动特征.主要断裂晚第四纪滑动速率及跨断裂GPS应变速率的结果表明,青藏高原北部边缘的断裂以低滑动速率（＜10 mm/a）为主,特别是两条边界断裂：阿尔金断裂和海原—祁连山断裂.两条主要边界断裂上的滑动速率分布显示了断裂间滑动速率转换及调整特征.阿尔金断裂自95°E以西的8～12 mm/a稳定滑动速率,向东逐渐降低到最东端的约1～2 mm/a,而海原断裂自哈拉湖一带开始发育后滑动速率为1～2 mm/a,到祁连一带（101°E以东）增大到相对稳定的4～5 mm/a,直到过海原后转向六盘山一带,滑动速率降低到1～3 mm/a,甚至更低.滑动速率的变化及分布特征显示,阿尔金断裂滑动主要是通过祁连山内部隆起及两侧新生代盆地变形引起的缩短来吸收的,海原—祁连山断裂的低滑动速率及沿断裂运动学特征表明断裂尾端的陇西盆地变形及六盘山的隆起是断裂左旋走滑速率的主要吸收方式.这一变形特征表明,青藏高原北部边缘的变形模式是一种分布式的连续变形,变形发生自高原内部,边界断裂的走滑被高原内部变形所吸收.  相似文献   

9.
The Tian Shan Mountains is an active orogen in the continent. Previous studies on its tectonic deformation focus on the expanding fronts to basins on either side, while little work has been done on its interiors. This work studied the north-edge fault of the Yanqi Basin on the southeastern flank of Tian Shan. Typical offset landforms, and lineaments of scarps on the eastern segment of this fault were used to constrain the vertical displacement and shortening rates. Geological and geomorphic mapping in conjunction with high-resolution GPS differential measurement reveals that the vertical offsets can be divided into three groups of 1.9m, 2.4m and 3.0m, and the coseismic vertical offset was estimated as 0.5~0.6m. In situ 10Be terrestrial cosmogenic nuclide dating of three big boulders capping the regional geomorphic surface that preserved 3.0m vertical offset suggests that the surfaces were exposed at~5ka. Meanwhile, the lacustrine sediments from Bosten Lake within the Yanqi Basin suggest climate change during cooling-warming transitions was also at~5ka. The climate, therefore, controlled creation and abandonment of geomorphic surfaces in southern piedmont of Tian Shan. Combining the exposure ages and vertical offsets, we inferred that the east section of the north-edge fault in the Yanqi Basin has a dip slip rate 0.6~0.7mm/a,~0.5mm/a of vertical slip and~0.4mm/a of shortening since 5ka. Based on calculation of earthquake moment, we estimated that this fault is capable of generating M7.5 earthquakes in the future. This study provides new data for further understanding tectonic deformation of Tian Shan and is useful in seismic hazard assessment of this area.  相似文献   

10.
Medium- to high-resolution photographs taken by the Lunar Orbiter missions of the Humorum region show a definite pattern of lateral displacements of topographic elements and en echelon arrangement of crenulations upon mare ridges. The southern wall of Gassendi crater has been dextrally offset for distances up to 6 km along east-southeast faults. Towards the west the strike-slip faults continue into highland material as bands up to 10 km wide of sinistral en echelon fractures, while towards the east the same faults transform into mare ridges with sinistral en echelon crestal crenulations. It is, therefore, very probable that the en echelon crenulations represent igneous rock intruded into or extruded through tension gashes which developed in lava that overlie strike-slip faults and through movement along these faults.The pattern of commonly recurring lineament strikes and sense of wrench faulting corresponds to a generating stress system in which the regional maximum compression acted between 10 and 20° and the intermediate compression was directed vertically. Lineaments that strike northeast and those trending within the northwest quadrant show indications of slip in left-lateral and right-lateral sense, respectively.  相似文献   

11.
The Xiangshan-Tianjingshan fault zone is an important part of the arc tectonic zone in northeastern Tibet, whose eastern segment is characterized by primarily left-lateral slip along with thrust component. In contrast, the fault movement property on the western segment of the Xiangshan-Tianjingshan fault zone is more complicated. According to the offset geomorphic features and cross sections revealed by the trenches and outcrops, the western segment is mainly a left-lateral strike-slip fault with normal component, and only accompanied with reverse component at specific positions. To determine the genetic mechanism of fault movement property on the western segment, we obtained three main factors based on the integrated analysis of fault geometry:(1)Step-overs:the left-stepping parallel faults in a sinistral shear zone create extensional step-overs and control the nearby and internal fault movement property; (2)terminal structures:they are conductive to stop rupture propagation and produce compressive deformation at the end of the fault trace; and(3)double bends:strike-slip faults have trace that bends such that slip between two adjacent blocks creates a compressive stress and thrust fault. Additionally, the Tianjingshan sub-block moves to SEE and creates an extensional stress at the end of the sub-block associated with normal faults. It shows that the Xiangshan-Tianjingshan fault zone has a complex evolution history, which is divided into two distinctive periods and characterized by laterally westward propagating.  相似文献   

12.
The 40km-long, NEE trending Reshui-Taostuo River Fault was found in the southern Dulan-Chaka highland by recent field investigation, which is a strike-slip fault with some normal component. DEM data was generated by small unmanned aerial vehicle(UAV)on key geomorphic units with resolution<0.05m. Based on the interpretation and field investigation, we get two conclusions:1)It is the first time to define the Reshui-Taostuo River Fault, and the fault is 40km long with a 6km-long surface rupture; 2)There are left-handed dislocations in the gullies and terraces cut by the fault. On the high-resolution DEM image obtained by UAV, the offsets are(9.3±0.5) m, (17.9±1.5) m, and(36.8±2) m, measured by topographic profile recovery of gullies. The recovery measurements of two terraces present that the horizontal offset of T1/T0 is(18.2±1.5) m and the T2/T1 is (35.8±2) m, which is consistent with the offsets from gullies. According to the historical earthquake records, a M5 3/4 earthquake on April 10, 1938 and a MS5.0 earthquake on March 21, 1952 occurred at the eastern end of the surface rupture, which may be related to the activity of the fault. By checking the county records of Dulan and other relevant data, we find that there are no literature records about the two earthquakes, which is possibly due to the far distance to the epicenter at that time, the scarcity of population in Dulan, or that the earthquake occurred too long ago that led to losing its records. The southernmost ends of the Eastern Kunlun Fault and the Elashan Fault converge to form a wedge-shaped extruded fault block toward the northwest. The Dulan Basin, located at the end of the wedge-shaped fault block, is affected by regional NE and SW principal compressive stress and the shear stress of the two boundary faults. The Dulan Basin experienced a complex deformation process of compression accompanying with extension. In the process of extrusion, the specific form of extension is the strike-slip faults at each side of the wedge, and there is indeed a north-east and south-west compression between the two controlling wedge-shaped fault block boundary faults, the Eastern Kunlun and Elashan Faults. The inferred mechanism of triangular wedge extrusion deformation in this area is quite different from the pure rigid extrusion model. Therefore, Dulan Basin is a wedge-shaped block sandwiched between the two large-scale strike-slip faults. Due to the compression of the northeast and southwest directions of the region, the peripheral faults of the Dulan Basin form a series of southeast converging plume thrust faults on the northeast edge of the basin near the Elashan Fault, which are parallel to the Elashan Fault in morphology and may converge with the Elashan Fault in subsurface. The southern marginal fault of the Dulan Basin(Reshui-Taostuo River Fault)near the Eastern Kunlun fault zone is jointly affected by the left-lateral strike-slip Eastern Kunlun Fault and the right-lateral strike-slip Elashan Fault, presenting a left-lateral strike-slip characteristic. Meanwhile, the wedge-shaped fault block extrudes to the northwest, causing local extension at the southeast end, and the fault shows the extensional deformation. These faults absorb or transform the shear stress in the northeastern margin of the Tibet Plateau. Therefore, our discovery of the Dulan Reshui-Taostuo River Fault provides important constraints for better understanding of the internal deformation mode and mechanism of the fault block in the northeastern Tibetan plateau. The strike of Reshui-Taostuo River Fault is different from the southern marginal fault of the Qaidam Basin. The Qaidam south marginal burial fault is the boundary fault between the Qaidam Basin and the East Kunlun structural belt, with a total length of ~500km. The geophysical data show that Qaidam south marginal burial fault forms at the boundary between the positive gravity anomaly of the southern East Kunlun structural belt and the negative gravity anomaly gradient zone of the northern Qaidam Basin, showing as a thrust fault towards the basin. The western segment of the fault was active at late Pleistocene, and the eastern segment near Dulan County was active at early-middle Pleistocene. The Reshui-Taostuo River Fault is characterized by sinistral strike-slip with a normal component. The field evidence indicates that the latest active period of this fault was Holocene, with a total length of only 40km. Neither remote sensing image interpretation nor field investigation indicate the fault extends further westward and intersects with the Qaidam south marginal burial fault. Moreover, it shows that its strike is relatively consistent with the East Kunlun fault zone in spatial distribution and has a certain angle with the burial fault in the southern margin of Qaidam Basin. Therefore, there is no structural connection between the Reshui-Taostuo River Fault and the Qaidam south marginal burial fault.  相似文献   

13.
海原走滑断裂带及其尾端挤压构造   总被引：36，自引：10，他引：26       下载免费PDF全文
研究了青藏高原东北部地区海原活动断裂带的几何学、运动学和动力学特征、左旋位移总量及全新世滑动速率,对海原走滑断裂带东南端发育的尾端挤压区的构造特征及地壳缩短量进行了研究,分析了走滑断裂带的走滑量与端部挤压区地壳缩短量之间的转换平衡关系  相似文献   

14.
本研究通过对东构造结及其周边地区主要断裂进行野外考察,通过GPS观测数据和地质、地球物理资料的综合分析,建立三维有限元模型;运用数值模拟方法对东构造结周边地区主要断裂现今运动特征进行模拟研究,取得一些初步的认识:(1)东构造结北侧和东侧地块总体上围绕构造结发生顺时针旋转,右旋走滑的东南边界断裂不是嘉黎断裂,可能是阿帕龙...  相似文献   

15.
龙陵-瑞丽断裂(南支)北段晚第四纪活动性特征   总被引：5，自引：0，他引：5       下载免费PDF全文
遥感影像解译和野外地质地貌调查表明,龙陵-瑞丽断裂(南支)北段是以左旋走滑为主兼张性正断的区域性活动断裂。根据一些断错地貌点的大比例尺填图、实地测量及其年代学分析,确定了该断裂为全新世活动断裂,断裂晚更新世以来的平均水平滑动速率为2.2mm/a,平均垂直滑动速率为0.6mm/a;全新世以来的平均水平滑动速率为1.8～3.0mm/a,平均垂直滑动速率为0.5mm/a。断裂晚更新世以来的滑动速率在不同的时间尺度上变化不大,反映了该断裂晚更新世以来的活动强度比较平稳  相似文献   

16.
西秦岭临潭-宕昌断裂第四纪最新活动特征   总被引：2，自引：0，他引：2  
临潭-宕昌断裂是西秦岭造山带内一条重要的分支断裂,其最新活动特征是分析西秦岭构造变形的重要依据。临潭-宕昌断裂的新构造活动强烈,中强地震频繁,但目前对于断裂的新活动特征研究程度较低,未见有其全新世活动地质地貌证据的报道。文中基于遥感解译、宏观地貌分析研究断裂的长期活动表现和分段性;同时通过地质地貌考察、无人机摄影测量、差分GPS和放射性碳测年等方法定量研究断裂的新活动特征;最后基于研究结果探讨了断裂及附近区域的地震危险性和区域构造变形。结果表明:根据断层迹线收敛程度和宏观地貌差异,可将临潭-宕昌断裂分为西、中、东3段;断裂的运动性质以左旋走滑为主,兼具逆冲分量,左旋走滑使洮河及其支流、冲沟和山脊等发生同步左旋拐弯,最大左旋位移可达3km,逆冲分量使新近纪盆地边缘和内部形成300~500m的垂向位移;断裂的最新活动时代为全新世,限定了1次2 090~7 745a BP(置信度为2σ)的全新世古地震事件;全新世早期以来,临潭-宕昌断裂东段主干断裂的左旋走滑速率为0.86~1.65mm/a,垂直滑动速率为0.05~0.10mm/a。临潭-宕昌断裂分配了约2mm/a的左旋走滑分量,是东昆仑-西秦岭阶区变形分配的关键断裂之一。  相似文献   

17.
涉县断裂为太行山隆起区内涉县盆地的控盆构造,走向由NE转为近EW向,倾向NW/N,中部在井店东被EW向断裂错断,是控制涉县盆地的一组断裂。本文采用地质地貌调查、河流阶地分析和地质测年等方法,研究了涉县断裂晚第四纪活动特征。研究发现,涉县断裂带由多组断裂构成,带宽约200m,在清漳河两侧表现为山前的陡崖地貌、基岩破碎变形带,具有正断兼走滑特征,在基岩变形带上部发育走向NNE向和NWW向次级滑动面,次级滑动面错断第四系黄土,最新活动到晚更新世;断裂在盆地区通过,地表形成低缓陡坎,断裂错断Q2-3地层,表现为上陡下缓的正断层。通过对涉县断裂两侧清漳河河流阶地、夷平面和地层年龄综合分析,估算涉县断裂晚更新世以来平均垂直滑动速率为0.06～0.08mm/a,中更新世以来平均垂直滑动速率为0.22～0.34mm/a,垂直差异活动主要发生于中更新世期间。  相似文献   

18.
A detailed investigation of microseismicity and fault plane solutions are used to determine the current tectonic activity of the prominent zone of seismicity near Samos Island and Kusadasi Bay. The activation of fault populations in this complex strike-slip and normal faulting system was investigated by using several thousand accurate earthquake locations obtained by applying a double-difference location method and waveform cross-correlation, appropriate for areas with relatively small seismogenic structures. The fault plane solutions, determined by both moment tensor waveform inversions and P-wave first motion polarities, reveal a clear NS trending extension direction, for strike slip, oblique normal and normal faults. The geometry of each segment is quite simple and indicates planar dislocations gently dipping with an average dip of 40–45°, maintaining a constant dip through the entire seismogenic layer, down to 15 km depth.  相似文献   

19.
在野外实测工作基础上, 对香山北缘活动断裂带东段自晚更新世以来的水平活动强度分时、 分段进行了研究. 结果表明, 该断裂带东段自晚更新世以来, 总体水平活动强度不大: 晚更新世早—中期水平位移速率为1.44 mm/a, 晚期水平位移速率为0.53 mm/a, 全新世水平位移速率为1.01 mm/a. 该断裂带左旋走滑强度在走向上具有不均一性, 而且其活动强度的最大部位(活动中心)随时间向东发生迁移, 碱沟—刘岗井次级断层是现今活动强度最大的次级断层.   相似文献   

20.
东昆仑活动断裂是青藏高原东北部一条重要的NWW向边界断裂。 玛曲断裂位于东昆仑断裂带的最东段。 根据野外考察结果认为玛曲断裂全新世以来活动强烈, 主要表现为左旋走滑运动, 并伴有正倾滑运动性质。 断错地貌特征明显, 断裂过玛曲县城以后, 沿黑河南岸穿过若尔盖草地向东, 直至岷山北端求吉附近。 通过两处断错地貌的全站仪器实测和测年资料讨论了玛曲断裂新活动特征和全新世滑动速率, 玛曲断裂全新世早期以来的平均水平滑动速率为6.29～5.71 mm/a, 全新世晚期以来的平均水平滑动速率为4.19～4.03 mm/a。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号