共查询到20条相似文献，搜索用时 811 毫秒
1.
2003年中科院古脊椎动物和古人类研究所专家汪筱林和周忠和先生研究了辽宁西部热河群上部九佛堂组近两年来发现的大量翼手龙化石中一件几乎完整的化石骨架，认为是一种古神翼龙科翼龙，命名为董氏中国翼龙(Sinopterus dongi)，“董氏”种名献给中国著名恐龙学家董枝明研究员。此前古神翼龙科仅在南美大陆巴西有过报道，中国翼龙是迄今古神翼龙科保存最完整和层位最低的记录。 相似文献
2.
魏氏准噶尔翼龙(Dsungaripterus weii)是一类翼展可达5米的大型翼龙类化石,已知的化石材料均产自新疆准噶尔盆地西北缘乌尔禾–德仑山一带早白垩世吐谷鲁群地层中。最近,一件新的保存完整的头骨化石发现于准噶尔盆地东缘五彩城附近,进一步扩大了魏氏准噶尔翼龙的地理分布范围。同时新材料还显示出该翼龙头骨的一些新特征：鼻骨具有长的较细的腹突、鼻骨后突上存在前后排列的一小窝及一小孔,丰富了我们对该翼龙头骨形态的认识。 相似文献
3.
目前中国已经有8个省及自治区发现翼龙化石,时代分布从中侏罗世一直延续到晚白垩世。对近年来大量发现翼龙化石的辽宁玲珑塔和产出浙江翼龙的塘上组两个有争议的化石层位进行了U-Pb同位素测年,得到了最新的年龄数据。在玲珑塔地区含化石沉积地层的碎屑锆石获得了最小150 Ma的同位素年龄,可能代表了化石层位的时代下限,表明含化石层的时代为晚侏罗世。同时,也获得了浙江天台盆地富含恐龙蛋化石层下伏的塘上组和临海上盘浙江翼龙化石地点的塘上组(小雄组)凝灰岩的年龄,分别为113 Ma和90Ma,证实了浙江翼龙产于晚白垩世,而浙江地区不同盆地的塘上组应属于不同时期的沉积。在辽西和浙江这两个重要的有争议的翼龙化石地点的同位素最新年龄数据的基础上,对中国发现的翼龙化石的地层序列和时代框架进行了初步的总结,表明早白垩世翼龙占优势地位。 相似文献
4.
198 6年 4月浙江省临海市上盘镇岙里村青年农民徐成法 ,在村后山采石场上白垩统塘上组沉凝灰岩中 ,发现一较完整的翼龙骨架化石 ,即致信浙江自然博物馆 ,引起有关方面重视。同年他又陆续采得 3个完整程度不一的翼龙骨架化石及零散残骸化石。此后当地农民又采得一完整翼龙头骨化石。1990年浙江自然博物馆蔡正全、魏丰展开了研究 ,确定为一种大型翼龙新属新种。分类 :爬行动物纲 ,翼龙目 ,夜翼龙科 ,浙江翼龙属 ,临海浙江翼龙。特征 :翼展达 5ｍ以上。头骨低而长 ,前颌上部至后顶端浑圆。鼻孔和眶前孔合成一卵形大孔 ,约占头骨全长 1/2。喙细… 相似文献
5.
中国辽宁西部早白垩世翼龙类化石非常丰富,其上部的九佛堂组翼龙类组合以含有丰富的无齿的古神翼龙科、朝阳翼龙科等进步类型而与下部的义县组翼龙类组合相区别。本文描述了辽宁西部建昌盆地九佛堂组一新的大型翼龙类化石,其以上下颌无齿、吻端指数为3.7、前颌骨背支细长且封闭鼻眶前孔背缘、很大的鼻眶前孔后端超过上下颌关节位置、轭骨的上颌骨突基部宽大而应被归入朝阳翼龙科(Chaoyangopteridae)神州翼龙属(Shenzhoupterus)。其以较大的体形(翼展2.05 m)、平直的上下颌咬合面、轭骨的眶后骨突较泪骨突长且基部略宽、第4～7颈椎长度依次减小等特征,区别于朝阳神州翼龙(Shenzhoupterus chaoyangensis),而被命名为三亚神州翼龙(新种)(Shenzhoupterus sanyainus sp. nov.)。这是辽宁西部早白垩世翼展最大且不具牙齿的翼龙类属种,它的发现丰富了九佛堂组翼龙类组合内容,对认识朝阳翼龙科的骨骼形态与生态习性亦具有积极意义。 相似文献
6.
7.
发现于内蒙古鄂托克旗召稍早白垩世罗汉洞组的一件不完整翼龙类下颌标本,以下颌愈合部长且平直、齿骨侧嵴发育、近圆形齿窝沿侧嵴之上的齿骨侧面上半部分自前向后呈直线排列、齿窝直径(2~2.5 mm)前后变化较小、相邻齿窝的间距约为齿窝直径的一半、下颌牙齿密度为3枚/cm等特征,可归入梳颌翼龙科(Ctenochasmatidae),且代表一新属种——郝氏鄂托克翼龙Otogopterus haoae gen.et sp.nov.。该化石是继鄂托克旗新召准噶尔翼龙科的平颌鄂尔多斯翼龙Ordosipterus planignathus之后在内蒙古鄂尔多斯地区发现的第2件确切翼龙类材料,丰富了这一地区早白垩世脊椎动物群的组成。该翼龙也是继甘肃庆阳环河翼龙Huanhepterus quingyangensis之后在鄂尔多斯盆地发现的第2种梳颌翼龙科化石,进一步扩大了鄂尔多斯盆地梳颌翼龙科的地理分布范围,同时表明鄂尔多斯盆地是继辽宁西部之后梳颌翼龙科在中国的又一重要分布区。 相似文献
8.
本文回顾了中国翼龙化石的发现和研究。特别是最近几年在辽宁省西部及其周边地区发现的大量的翼龙化石,使该地区成为世界上最著名的翼龙化石产地之一,尤其是对研究陆相沉积中的翼龙,物种分异和古生物学的重要性可以与德国的Solnhofen Limestone和巴西的Santana Formation 相媲美。目前中国发现有隶属12个科的34个属的翼龙。既包括原始的喙嘴龙类,进步的翼手龙类,也包括处于两者之间的过渡类型-达尔文翼龙类以及胚胎蛋化石。 相似文献
9.
《地质论评》2007,53(5):388-388
吕君昌,姬书安,袁崇喜,季强.著.2006.中国的翼龙类化石.北京:地质出版社,147页。本书系统地总结了迄今为止中国发现的翼龙类化石。全书共分8章,第1章简要介绍了关于翼龙的基本知识;第2章介绍了中国翼龙类化石产地的地情况;第3章对中国迄今为止发表的翼龙属种进行逐一分析,修订了某些属种的特征;第4章运用支序系统学方法,分析了龙各类群之间的关系;第5章简单介绍了翼龙的软组织及其印痕化石;第6章介绍了翼龙的生活习性及生理特征;第7章介了中国翼龙类的地理分布和地质时代;第8章介绍了中国翼龙类化石的研究现状及展望。联系人:100037,北京阜… 相似文献
10.
本文总结了古神翼龙类的特征,尤其是对中国发现的没有牙齿的翼龙类(包括古神翼龙类、朝阳翼龙类及神龙翼龙类)进行系统总结。通过对比,把中国的古神翼龙类建立两个新的亚科:中国翼龙亚科及华夏翼龙亚科。从古神翼龙类头骨形态变化来看,其演化趋势是头骨由低长向短高变化,这一变化的原因可能与其食性变化有关。根据在辽西凌源四合当九佛堂组发现的一几乎完整的化石骨架建立了中国翼龙新种:凌源中国翼龙(新种),它具有以下特征:鼻眶前孔的长度与高度之比率为3.20;吻部指数为3.03;股骨与胫骨长度之比率约为0.66以及第2翼指骨与第1翼指骨长度之比率为0.85。根据发现于辽西朝阳九佛堂组的另一个体较小的古神翼龙类化石骨架,建立华夏翼龙属一新种:返祖华夏翼龙(新种)。虽然它个体较小,但是它具有华夏翼龙类似的头骨脊,然而它的第2和第3翼指骨的后面具有原始喙嘴龙类翼龙的沟状结构,以区别于其它的华夏翼龙类。返祖华夏翼龙的翼指骨后部沟状结构的出现,应为返祖现象的体现。而这一现象,在翼手龙类中为首次报道。 相似文献
11.
S. Viswanathan K. Surya Prakash Rao B. Mahabaleswar 《Journal of the Geological Society of India》2013,82(6):621-627
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours. 相似文献
12.
13.
奥地利安东帕有限公司 《岩矿测试》2009,28(3):306-306
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提 相似文献
14.
E. M. Prasolov S. A. Sergeev B. V. Belyatsky E. S. Bogomolov K. A. Gruzdov I. N. Kapitonov R. Sh. Krymsky V. O. Khalenev 《Geochemistry International》2018,56(1):46-64
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others. 相似文献
15.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance. 相似文献
16.
17.
Alexander E. C. Broberg J. S. Kehren A. R. Graziani M. M. Turri W. L. 《Environmental Geology》1993,22(4):353-361
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes. 相似文献
18.
Mercury,arsenic, antimony,and selenium contents of sediment from the Kuskokwim River,Bethel, Alaska,USA 总被引：1，自引：0，他引：1
The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources. 相似文献
19.
滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床. 相似文献
20.
岩石密度和超高压岩石折返速率 总被引：1，自引：3，他引：1
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。 相似文献