首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Tunnel valleys are common throughout the terrain of the Saginaw Lobe of the Laurentide Ice Sheet in southern Michigan. The set of valleys described in this paper is regularly spaced in a radial pattern behind the Kalamazoo Moraine, an ice‐marginal position formed during retreat from the Last Glacial Maximum. These valleys are divided into proximal and distal groups lying north and south, respectively, of a major river valley that cross‐cuts the tunnel valleys at right angles. Based on a series of rotasonic borings and core analysis, the proximal valleys are shallow, contain minimal sediment fill, and overlie fine‐grained diamicton and glaciolacustrine sediment, whereas the distal valleys are deeply incised into the substrate and are partially filled with coarse sediment. The distal valleys terminate within a broad zone of high‐relief, hummocky topography representing stagnation and collapse behind the Kalamazoo ice margin. The proximal valleys occur within a more subdued landscape located farther from the ice margin. Although some elements of existing genetic models are consistent with these valleys, none appears to be completely compatible with their stratigraphy and morphology. Initial incision of the valleys could have involved short‐lived moderate‐ to high‐discharge flows, followed by deposition during or after the events. The deep incision and thick, coarse sediment in distal valleys in the stagnant marginal zone probably involved supraglacial meltwater draining to the bed as the margin downwasted. Fining‐upward eskers inset into the valleys were formed by flows of declining energy in small late‐stage conduits.  相似文献   

2.
Sediment cores from lakes Kormovoye and Oshkoty in the glaciated region of the Pechora Lowland, northern Russia, reveal sediment gravity flow deposits overlain by lacustrine mud and gyttja. The sediments were deposited mainly during melting of buried glacier ice beneath the lakes. In Lake Kormovoye, differential melting of dead ice caused the lake bottom to subside at different places at different times, resulting in sedimentation and erosion occurring only some few metres apart and at shifting locations, as further melting caused inversion of the lake bottom. Basal radiocarbon dates from the two lakes, ranging between 13 and 9 ka, match with basal dates from other lakes in the Pechora Lowland as well as melting of ice‐wedges. This indicates that buried glacier ice has survived for ca. 80 000 years from the last glaciation of this area at 90 ka until about 13 ka when a warmer climate caused melting of permafrost and buried glacier ice, forming numerous lakes and a fresh‐looking glacial landscape. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

3.
Genesis of hummocky moraine in the Bolmen area, southwestern Sweden   总被引：2，自引：0，他引：2  
During the late Weichselian deglaciation of southern Scandinavia vast areas of hummocky moraine were formed. The genesis of this landform was studied by geomorphological and sedimentological methods in an area in southwestern Sweden. Four exposures in moraine hummocks were investigated using sedimentological methods. They were found to be composed of stratified diamictons with frost-shattered boulders and deformed intrabeds of sorted sediments. The diamictons were interpreted as sediment-flow deposits, with the hummocks formed in stagnant ice by flowage of supraglacial glacial debris into depressions and subsequent inversion of the landscape due to ice melt. With the exception of hummocky moraine, the study area contains low relief moraine, which like the hummocky moraine was supraglacially formed. A new model is presented where the distribution of hummocky and low relief moraine is dependent on the vertical distribution of glacial debris in the ice sheet, which in turn is related to the flow regime of the ice sheet prior to stagnation. A compressive flow before stagnation favoured development of the hummocky moraine, while low relief moraine formation occurred where the ice flow was extending or at steady state.  相似文献   

4.
The Klutlan Glacier in the St. Elias Mountains of the Yukon Territory has surged repeatedly during the last few hundred years, and its drift-covered stagnant ice provides an analog for the downwastage, landform development, vegetational succession, and lake formation on Late Wisconsin moraines of Minnesota. Melting of the buried ice caused collapse of the drift mantle and the formation of lakes, which become filled with sediment that slumps in from receding ice walls. Topographic reversals are common, as the sediment cover of drained lakes inhibits local under-melting, and collapse occurs elsewhere. As the drift mantle thickens the land surface becomes stabilized and pioneer herbs are succeeded by shrubs and then by white spruce. The oldest moraines (600–1200 yr old) have a multiple-generation spruce forest, yet melting of buried ice still locally forms young lakes. Cores of organic sediment from the oldest lakes contain a stratigraphic sequence of pollen, diatoms and cladocerans that record the early stages in lake and landscape succession.  相似文献   

5.
Controlled moraines are supraglacial debris concentrations that become hummocky moraine upon de-icing and possess clear linearity due to the inheritance of the former pattern of debris-rich folia in the parent ice. Linearity is most striking wherever glacier ice cores still exist but it increasingly deteriorates with progressive melt-out. As a result, moraine linearity has a low preservation potential in deglaciated terrains but hummocky moraine tracts previously interpreted as evidence of areal stagnation may instead record receding polythermal glacier margins in which debris-rich ice was concentrated in frozen toe zones. Recent applications of modern glaciological analogues to palaeoglaciological reconstructions have implied that: (a) controlled moraine development can be ascribed to a specific process (e.g. englacial thrusting or supercooling); and (b) controlled moraine preservation potential is good enough to imply the occurrence of the specific process in former glacier snouts (e.g. ancient polythermal or supercooled snouts). These assumptions are tested using case studies of controlled moraine construction in which a wide range of debris entrainment and debris-rich ice thickening mechanisms are seen to produce the same geomorphic features. Polythermal conditions are crucial to the concentration of supraglacial debris and controlled moraines in glacier snouts via processes that are most effective at the glacier–permafrost interface. End moraines lie on a process–form continuum constrained by basal thermal regime. The morphological expression of englacial structures in controlled moraine ridges is most striking while the moraines retain ice cores, but the final deposits/landforms tend to consist of discontinuous transverse ridges with intervening hummocks, preserving only a weak impression of the former englacial structure. These are arranged in arcuate zones of hummocky moraine up to 2 km wide containing ice-walled lake plains and lying down flow of streamlined landforms produced by warm-based ice. A variety of debris entrainment mechanisms can produce the same geomorphic signature. Spatial and temporal variability in process–form relationships will lead to the sequential development of different types of end moraines during the recession of a glacier or ice sheet margin.  相似文献   

6.
Three stages of deposition are distinguished in thermokarst-lake-basin sequences in ice-rich permafrost of the Tuktoyaktuk Coastlands, western arctic Canada: (1) widespread retrogressive thaw slumping around lake margins that rapidly transports upland sediments into thermokarst lakes, forming a distinctive basal unit of impure sand and/or diamicton; (2) a reduction or cessation of slumping-because of the pinching out of adjacent ground ice, slump stabilization or climatic cooling, that reduces the input of clastic sediment, permitting reworking of sediment around lake margins and suspension settling, principally in basin centres; (3) lakes drain and deposition may continue by gelifluction and accumulation of in situ peat or aeolian sand. Radiocarbon dating of detrital peat and wood from a progradational sequence (basal unit) defines a lateral younging trend in the direction of progradation. A progradation rate is calculated to be ～ 4 cm yr?1, consistent with rapid deposition during stage (1) above. The nonuniform nature of the trend is attributed to episodic influxes of old organic material by slumping and reworking by waves and currents. In comparison with thermokarst-lake-basin sequences previously described in Alaska, Canada and Siberia, the middle unit of those in the Tuktoyaktuk Coastlands is similar, whereas the basal unit is generally thicker and, by contrast, often contains diamicton. These differences are attributed, respectively, to larger-scale resedimentation of upland sediments by retrogressive thaw slumping and debris-flow deposition in thermokarst lakes in the Tuktoyaktuk Coastlands. Compared with the sediments within supraglacial lakes in areas of moderate to high relief, the middle unit of thermokarst-lake-basin sequences in the Tuktoyaktuk Coastlands lacks clastic varves and the basal unit is much thinner and texturally less variable. These differences are attributed to higher relief and larger volumes of meltwater and glacigenic sediment in supraglacial lakes, which promote more suspension settling and resedimentation of glacigenic sediment than in thermokarst lakes in the Tuktoyaktuk Coastlands. It may be impossible to distinguish glacial and periglacial thermokarst-lake-basin sediments in permafrost areas of incomplete deglaciation. Not only is it often difficult to distinguish intrasedimental and buried glacier ice, but the depositional processes associated with thaw of both ice types are presumably the same and the host sediments very similar.  相似文献   

7.
Clast-supported boulder gravel in outwash-fans along the glacial-maximum margin of the Laurentide Ice Sheet in Wisconsin indicates the occurrence of outburst floods. These sediments, with clast intermediate axes of up to 2 m, are located downstream of tunnel channels and were deposited shortly before cessation of glaciofluvial activity on each fan. Since tunnel channels with fans are widespread along the ice-sheet margin in the western Great Lakes region, these outburst floods were probably common. Paleodischarge estimates derived from the boulder deposits are poorly constrained, but values of at least several hundred m3 s−1 are likely. Four potential water sources for the floods exist: an extreme surface-melt event, an extreme precipitation event, drainage of supraglacial lakes, or drainage of stored subglacial meltwater. We focus on the storage of subglacial meltwater behind the ice-sheet margin, as proglacial permafrost was present as ice advanced to its maximum extent, and a frozen-bed zone upstream from the margin probably impeded drainage through groundwater aquifers. Decay of this permafrost ‘seal’ would have eventually allowed trapped water to drain through the tunnel channels. We suggest that the 2-m boulders were entrained in an outburst of subglacial water that enlarged a pre-existing channel cut by ablation-derived flows.  相似文献   

8.
The Kuannersuit Glacier surged 11 km between 1995 and 1998. The surge resulted in the formation of an ice cored thrust moraine complex constructed by subglacial and proglacial glaciotectonic processes. Four main thrust zones are evident in the glacier snout area with phases of compressional folding and thrusting followed by hydrofracture in response to the build-up of compressional stresses and the aquicludal nature of submarginal permafrost and naled. Various types of stratified debris-rich ice facies occur within the marginal zone: The first (Facies I) comprises laterally continuous strata of ice with sorted sediment accumulations, and is reworked and thrust naled ice. The second is laterally discontinuous stratified debris-rich ice with distinct tectonic structures, and is derived through subglacial extensional deformation and localised regelation (Facies II), whilst the third type is characterised by reworked and brecciated ice associated with the reworking and entrainment of meteoric ice (Facies III). Hydrofracture dykes and sills (Facies IV) cross-cut the marginal ice cored thrust moraines, with their sub-vertically frozen internal contact boundaries and sedimentary structures, suggesting supercooling operated as high-pressure evacuation of water occurred during thrusting, but this is not related to the formation of basal stratified debris-rich ice. Linear distributions of sorted fines transverse to ice flow, and small stratified sediment ridges that vertically cross-cut the ice surface up-ice of the thrust zone relate to sediment migration along crevasse traces and fluvial infilling of crevasses. From a palaeoglaciological viewpoint, marginal glacier tectonics, ice sediment content and sediment delivery mechanisms combine to control the development of this polythermal surge valley landsystem. The bulldozing of proglacial sediments and the folding and thrusting of naled leads to the initial development of the outer zone of the moraine complex. This becomes buried in bulldozed outwash sediment and well-sorted fines through surface ablation of naled. Up-ice of this, the heavily thrust margin becomes buried in sediment melted out from basal debris-rich ice and subglacial diamicts routed along thrusts. These mechanisms combine to deliver sediment to supraglacial localities, and promote the initial preservation of structurally controlled moraines through insulation, and the later development of kettled dead ice terrain.  相似文献   

9.
Near Williams Lake, in the central interior of British Columbia, the Fraser River exposes long sections of late Pleistocene glaciolacustrine sediments selectively preserved within a bedrock trough. The dominant facies types are thick, normally graded gravels and sands that occupy steeply dipping multistorey channels up to 300 m wide and several tens of metres deep. Channels appear to have been simultaneously cut and filled by high density turbidity currents in a glacial lake floored by stagnant ice. Fining upward sediment gravity flow sequences up to 50 m thick may be the product of quasi-continuous ‘surging’ turbidity flows triggered by catastrophic meltwater discharges into the trough or retrogressive failure of ice-cored sediments. Large-scale post-depositional deformation structures, such as synclinal folds, normal faults, sedimentary dyke swarms and dewatering structures, record gravitational foundering of sediment and pore-water expulsion caused by the melt of underlying glacier ice. Melting of buried ice masses along the floor of the trough appears to have controlled the flow paths of turbidity currents by producing sub-basins within the overlying sediment pile. An idealized model of ‘supraglacial’ lacustrine sedimentation is developed that may be applicable to other glaciated areas with similar bedrock topography.  相似文献   

10.
The sediment–landform associations of the northern Taymyr Peninsula in Arctic Siberia tell a tale of ice sheets advancing from the Kara Sea shelf and inundating the peninsula, probably three times during the Weichselian. In each case the ice sheet had a margin frozen to its bed and an interior moving over a deforming bed. The North Taymyr ice‐marginal zone (NTZ) comprises ice‐marginal and supraglacial landsystems dominated by thrust‐block moraines 2–3 km wide and large‐scale deformation of sediments and ice. Large areas are still underlain by remnant glacier ice and a supraglacial landscape with numerous ice‐walled lakes and kames is forming even today. The proglacial landsystem is characterised by subaqueous (e.g. deltas) or terrestrial (e.g. sandar) environments, depending on location/altitude and time of formation. Dating results (OSL, 14C) indicate that the NTZ was initiated ca. 80 kyr BP during the retreat of the Early Weichselian ice sheet and that it records the maximum limit of a Middle Weichselian glaciation (ca. 65 kyr BP). During both these events, proglacial lakes were dammed by the ice sheets. Part of the NTZ was occupied by a thin Late Weichselian ice sheet (20–12 kyr BP), resulting in subaerial proglacial drainage. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

11.
Englacial debris structures, morphology and sediment distribution at the frontal part and at the proglacial area of the Scott Turnerbreen glacier have been studied through fieldwork and aerial photograph interpretation. The main emphasis has been on processes controlling the morphological development of the proglacial area. Three types of supraglacial ridges have been related to different types of englacial debris bands. We suggest that the sediments were transported in thrusts, along flow lines and in englacial meltwater channels prior to, and during a surge in, the 1930s, before the glacier turned cold. Melting-out of englacial debris and debris that flows down the glacier front has formed an isolating debris cover on the glacier surface, preventing further melting. As the glacier wasted, the stagnant, debris-covered front became separated from the glacier and formed icecored moraine ridges. Three moraine ridges were formed outside the present ice-front. The further glacier wastage formed a low-relief proglacial area with debris-flow deposits resting directly on glacier ice. Melting of this buried ice initiated a second phase of slides and debris flows with a flow direction independent of the present glacier surface. The rapid disintegration of the proglacial morphology is mainly caused by slides and stream erosion that uncover buried ice and often cause sediments to be transported into the main river and out of the proglacial area. Inactive stream channels are probably one of the morphological elements that have the best potential for preservation in a wasting ice-cored moraine complex and may indicate former ice-front positions.  相似文献   

12.
Quaternary sedimentary successions are described from the Linda Valley, a small valley in western Tasmania that was dammed by ice during Early and Middle Pleistocene glaciations. Mapping and logging of exposures suggest that an orderly sequence of deposits formed during ice incursion, occupation and withdrawal from tributary valleys. Four principal sediment assemblages record different stages of ice occupation in the valley. As the glacier advanced, a proglacial, lacustrine sediment assemblage dominated by laminated silts and muds deposited from suspension accumulated in front of the glacier. A subglacial sediment assemblage consisting of deformed lacustrine deposits and lodgement till records the overriding of lake-bottom sediments as the glacier advanced up the valley into the proglacial lake. As the glacier withdrew from the valley, a supraglacial sediment assemblage of diamict, gravel, sand and silt facies formed on melting ice in the upper part of the valley. A lacustrine regression in the supraglacial assemblage is inferred on the basis of a change from deposits mainly resulting from suspension in a subaqueous setting to relatively thin and laterally discontinuous laminated sediments, occurrence of clastic dykes, and increasing complexity of the geometry of deposits that indicate deposition in a subaerial setting. A deltaic sediment assemblage deposited during the final stage of ice withdrawal from the valley consists of steeply dipping diamict and normally graded gravel facies formed on delta foresets by subaqueous sediment gravity flows. The sediment source for the delta, which prograded toward the retreating ice margin, was the supraglacial sediment assemblage previously deposited in the upper part of the valley. A depositional model developed from the study of the Linda Valley may be applicable to other alpine glaciated areas where glaciers flowed through or terminated in medium- to high-relief topography.  相似文献   

13.
The macro‐ and micro‐sedimentology of a supraglacial melt‐out till forming at the Matanuska Glacier was examined in relationship to the properties of the stratified basal zone ice and debris from which it is originating. In situ melting of the basal ice has produced a laminated to bedded diamicton consisting mainly of silt. Macroscopic properties include: discontinuous laminae and beds; lenses of sand, silt aggregates and open‐work gravel; deformed and elongate clasts of clay; widely dispersed pebbles and cobbles, those that are prolate usually with their long axes subparallel to parallel to the bedding. Evidence for deformation is absent except for localized bending of beds over or under rock clasts. Microscopic properties are a unique element of this work and include: discontinuous lineations; silt to granule size laminae; prolate coarse sand and rock fragments commonly with their long axis subparallel to bedding; subangular to subrounded irregular shaped clay clasts often appearing as bands; sorted and unsorted silt to granule size horizons, sometimes disrupted by pore‐water pathways. Limited deformation occurs around rock clasts and thicker parts of lamina. This study shows that in situ melting of debris‐rich basal ice can produce a laminated and bedded diamicton that inherits and thereby preserves stratified basal ice properties. Production and preservation of supraglacial melt‐out till require in situ melting of a stagnant, debris‐rich basal ice source with a low relief surface that becomes buried by a thick, stable, insulating cover of ice‐marginal sediment. Also required are a slow melt rate and adequate drainage to minimize pore‐water pressures in the till and overlying sediment cover to maintain stability and uninterrupted deposition. Many modern and ancient hummocky moraines down glacier of subglacial overdeepenings probably meet these process criteria and their common occurrence suggests that both modern and pre‐modern supraglacial melt‐out tills may be more common than previously thought.  相似文献   

14.
Subglacial landsystems in and around Okanagan Valley, British Columbia, Canada are investigated in order to evaluate landscape development, subglacial hydrology and Cordilleran Ice Sheet dynamics along its southern margin. Major landscape elements include drumlin swarms and tunnel valleys. Drumlins are composed of bedrock, diamicton and glaciofluvial sediments; their form truncates the substrate. Tunnel valleys of various scales (km to 100s km length), incised into bedrock and sediment, exhibit convex longitudinal profiles, and truncate drumlin swarms. Okanagan Valley is the largest tunnel valley in the area and is eroded >300 m below sea level. Over 600 m of Late Wisconsin-age sediments, consisting of a fining-up sequence of cobble gravel, sand and silt fill Okanagan Valley. Landform–substrate relationships, landform associations, and sedimentary sequences are incompatible with prevailing explanations of landsystem development centred mainly on deforming beds. They are best explained by meltwater erosion and deposition during ice sheet underbursts.During the Late-Wisconsin glaciation, Okanagan Valley functioned as part of a subglacial lake spanning multiple connected valleys (few 100s km) of southern British Columbia. Subglacial lake development started either as glaciers advanced over a pre-existing sub-aerial lake (catch lake) or by incremental production and storage of basal meltwater. High geothermal heat flux, geothermal springs and/or subglacial volcanic eruptions contributed to ice melt, and may have triggered, along with priming from supraglacial lakes, subglacial lake drainage. During the underburst(s), sheetflows eroded drumlins in corridors and channelized flows eroded tunnel valleys. Progressive flow channelization focused flows toward major bedrock valleys. In Okanagan Valley, most of the pre-glacial and early-glacial sediment fill was removed. A fining-up sequence of boulder gravel and sand was deposited during waning stages of the underburst(s) and bedrock drumlins in Okanagan Valley were enhanced or wholly formed by this underburst(s).Subglacial lake development and drainage had an impact on ice sheet geometry and ice volumes. The prevailing conceptual model for growth and decay of the CIS suggests significantly thicker ice in valleys compared to plateaus. Subglacial lake development created a reversal of this ice sheet geometry where grounded ice on plateaus thickened while floating valley ice remained thinner (due to melting and enhanced sliding, with significant transfer of ice toward the ice sheet margin). Subglacial lake drainage may have hastened deglaciation by melting ice, lowering ice-surface elevations, and causing lid fracture. This paper highlights the importance of ice sheet hydrology: its control on ice flow dynamics, distribution and volume in continental ice masses.  相似文献   

15.
In the Tempo Valley, north-central Ireland, flat-lying calcareous concretions are found within massive sand beds of glaciofluvial outwash which were deposited during the late Weichselian deglacial cycle. ( c . 17 000 14 000 BP). Morphologically, concretions (< 20 cm long. I I cm wide, 3 cm thick) arc bladcd to disc-shaped, lie parallel to sediment bedding planes, and have long axes aligned perpendicular to ice retreat direction. Internally, concretions are massive to framework-supported and were formed as calcareous cements precipitated from solute-rich groundwatcrs. Concretions, related to steep groundwater gradients and vigorous groundwater circulation cells, were formed proglacially at the base of a thin (1.5-2.0 m deep) layer of discontinuous permafrost as meltwater was actively expelled from the retreating ice margin. The presence of a discontinuous permafrost substrate can also help explain regional-scale geomorphic patterns indicating stagnation zone retreat of the Tempo Valley ice mass.  相似文献   

16.
中国第30次南极科学考察队格罗夫山分队(CHINARE30, 2013-2014年)利用雪地车载深层探冰雷达在东南极格罗夫山地区开展了测线总长度超过200 km大范围、高分辨率的冰厚及冰下地形调查, 获得了哈丁山北部和萨哈罗夫岭与阵风悬崖之间详细的冰厚及冰下地形特征. 通过对雷达数据分析表明, 哈丁山北部区域平均冰厚为580 m, 最大冰厚超过1 000 m, 出现在该区域的东北方向, 而东南方向冰厚相对较小; 萨哈罗夫岭与阵风悬崖之间区域的平均冰厚为610 m, 最大冰厚超过1 100 m, 该区域槽谷发育十分成熟, 槽谷形态近似呈U型. 通过对雷达剖面影像的筛选和分析, 推测在格罗夫山地区可能存在2个液态冰下湖泊.  相似文献   

17.
The Brampton kame belt represents one of the largest glaciofluvial complexes within the UK. It is composed of an array of landform-sediment assemblages, associated with a suite of meltwater channels and situated within a palimpsest landscape of glacial features in the heart of one of the most dynamic parts of the British-Irish Ice Sheet. Glacial geomorphological mapping and sedimentological analysis have allowed a detailed reconstruction of both the morphological features and the temporal evolution of the Brampton kame belt, with processes informed by analogues from modern ice margins. The kame belt demonstrates the development of a complex glacier karst typified by the evolution of subglacial meltwater tunnels into an englacial and supraglacial meltwater system dominated by ice-walled lakes and migrating ice-contact drainage networks. Topographic inversion led to the extensive reworking of sediments, with vertical collapse and debris flows causing partial disintegration of the morphology. The resultant landform comprises a series of kettle holes, discontinuous ridges and flat-topped hills. The Pennine escarpment meltwater network, which fed the Brampton kame belt, is composed of an anastomosing subglacial channel system and flights of lateral channels. The Brampton kame belt is envisaged to have formed during the stagnation of ice in the lee of the Pennines as ice retreated westwards into the Solway Lowlands. The formation of the Brampton kame belt also has particular conceptual resonance in terms of constraining the nature of kame genesis, whereby an evolving glacier karst is a key mechanism in the spatial and temporal development of ice-contact sediment-landform associations.  相似文献   

18.
We use a time-dependent two-dimensional ice-flow model to explore the development of the Green Bay Lobe, an outlet glacier of the southern Laurentide Ice Sheet, leading up to the time of maximum ice extent and during subsequent deglaciation (c. 30 to 8 cal. ka BP). We focus on conditions at the ice-bed interface in order to evaluate their possible impact on glacial landscape evolution. Air temperatures for model input have been reconstructed using the GRIP δ 18 O record calibrated to speleothem records from Missouri that cover the time periods of c. 65 to 30 cal. ka BP and 13.25 to 12.4 cal. ka BP. Using that input, the known ice extents during maximum glaciation and early deglaciation can be reproduced reasonably well. The model fails, however, to reproduce short-term ice margin retreat and readvance events during later stages of deglaciation. Model results indicate that the area exposed after the retreat of the Green Bay Lobe was characterized by permafrost until at least 14 cal. ka BP. The extensive drumlin zones that formed behind the ice margins of the outermost Johnstown phase and the later Green Lake phase are associated with modeled ice margins that were stable for at least 1000 years, high basal shear stresses (c. 100 kPa) and permafrost depths of 80-200 m. During deglaciation, basal meltwater and sliding became more important.  相似文献   

19.
基岩中的大块地下冰   总被引：1，自引：2，他引：1  
王保来 《冰川冻土》1990,12(3):209-218
  相似文献   

20.
Surging of the southwestern part of the Laurentide Ice Sheet   总被引：1，自引：0，他引：1  
The southwestern part of the Laurentidc Ice Sheet, in central North America, repeatedly surged during the last part of the Wisconsin Glaciation. Evidence includes the extreme lobation of the ice margin, the gentle slopes of lateral moraines and other marginal features, a radiocarbon chronology indicating extremely rapid marginal advance and retreat, and the abundance of supraglacial flow till. Rapid ice movement was caused by subglacial water and was probably limited to areas of slowly permeable substrate, which slowed the escape of the water.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号