首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
Stratabound epigenetic dolomite occurs in carbonate facies of the Barrandian basin (Silurian and Devonian), Czech Republic. The most intense dolomitization is developed in bioclastic calcarenites within the transition between micritic limestone and shaledominated Přídolí and Lochkov formations deposited on a carbonate slope. Medium-crystalline (100–400 μm), inclusion-rich, xenotopic matrix dolomite (δ 18O=−4.64 to −3.40‰ PDB;δ 13C=+1.05 to +1.85‰ PDB) which selectively replaced most of the bioclastic precursor is volumetrically the most important dolomite type. Coarse crystalline saddle dolomite (δ 18O=−8.04 to −5.14‰ PDB;δ 18C=+0.49 to +1.49 PDB) which precipitated in fractures and vugs within the matrix dolomite represents a later diagenetic dolomitization event. In some vugs, saddle dolomite coprecipitated with petroleum inclusion-rich authigenic quartz crystals and minor sulfides which, in turn, were post-dated by semisolid asphaltic bitumen. The interpretation of the dolomitization remains equivocal. Massive xenotopic dolomite, although generally characteristic of a deeper burial setting, may have been formed by a recrystallization of an earlier, possibly shallow burial dolomite. Deeper burial recrystallization by reactive basinal pore fluids that presumably migrated through the more permeable upper portion of the Přídolí sequence appears as a viable explanation for this dolomitization overprint. Saddle dolomite cement of the matrix dolomite is interpreted as the last dolomitization event that occurred during deep burial at the depth of the oil window zone. The presence of saddle dolomite, the fluid inclusion composition of associated quartz crystals, and vitrinite paleogeothermometry of adjacent sediments imply diagenetic burial temperatures as high as 160°C. Although high geothermal gradients in the past or the involvement of hydrothermally influenced basinal fluids can account for these elevated temperatures, burial heating beneath approximately 3-km-thick sedimentary overburden of presumably post-Givetian strata, no longer preserved in the basin, appears to be the most likely interpretation. This interpretaion may imply that the magnitude of post-Variscan erosion in the Barrandian area was substantially greater than previously thought.  相似文献   

2.
The oxygen isotope compositions of diagenetic carbonate minerals from the Lower Jurassic Inmar Formation, southern Israel, have been used to identify porewater types during diagenesis. Changes in porewater composition can be related to major geological events within southern Israel. In particular, saline brines played an important role in late (Pliocene-Pleistocene) dolomitization of these rocks. Diagenetic carbonates included early siderite (δ18OSMOW=+24.4 to +26.5‰δ13CPDB=?1.1 to +0.8‰), late dolomite, ferroan dolomite and ankerite (δ18OSMOW=+18.4 to +25.8‰; δ13CPDB=?2.1 to +0.2‰), and calcite (δ18OSMOW=+21.3 to +32.6‰; δ13CPDB=?4.2 to + 3.2‰). The petrographic and isotopic results suggest that siderite formed early in the diagenetic history at shallow depths. The dolomitic phases formed at greater depths late in diagenesis. Crystallization of secondary calcite spans early to late diagenesis, consistent with its large range in isotopic values. A strong negative correlation exists between burial depth (temperature) and the oxygen isotopic compositions of the dolomitic cements. In addition, the δ18O values of the dolomitic phases in the northern Negev and Judea Mountains are in isotopic equilibrium with present formation waters. This behaviour suggests that formation of secondary dolomite post-dates the tectonic activity responsible for the present relief of southern Israel (Upper Miocene to Pliocene) and that the dolomite crystallized from present formation waters. Such is not the case in the Central Negev. In that locality, present formation waters have much lower salinities and δ18O values, indicating invasion of freshwater, and are out of isotopic equilibrium with secondary dolomite. Recharge of the Inmar Formation by meteoric water in the Central Negev occurred in the Pleistocene, and halted formation of dolomite.  相似文献   

3.
Early marine diagenetic dolomite is a rather thermodynamically-stable carbonate phase and has potential to act as an archive of marine porewater properties. However, the variety of early to late diagenetic dolomite phases that can coexist within a single sample can result in extensive complexity. Here, the archive potential of early marine dolomites exposed to extreme post-depositional processes is tested using various types of analyses, including: petrography, fluid inclusion data, stable δ13C and δ18O isotopes, 87Sr/86Sr ratios, and U-Pb age dating of various dolomite phases. In this example, a Triassic carbonate platform was dissected and overprinted (diagenetic temperatures of 50 to 430°C) in a strike-slip zone in Southern Spain. Eight episodes of dolomitization, a dolostone cataclasite and late stage meteoric/vadose cementation were recognized. The following processes were found to be diagenetically relevant: (i) protolith deposition and fabric-preservation, and marine dolomitization of precursor aragonite and calcite during the Middle–Late Triassic; (ii) intermediate burial and formation of zebra saddle dolomite and precipitation of various dolomite cements in a Proto-Atlantic opening stress regime (T ca 250°C) during the Early–Middle Jurassic; (iii) dolomite cement precipitation during early Alpine tectonism, rapid burial to ca 15 km, and high-grade anchizone overprint during Alpine tectonic evolution in the Early Eocene to Early Miocene; (iv) brecciation of dolostones to cataclasite during the onset of the Carboneras Fault Zone activity during the Middle Miocene; and (v) late-stage regression and subsequent meteoric overprint. Data shown here document that, under favourable conditions, early diagenetic marine dolomites and their archive data may resist petrographic and geochemical resetting over time intervals of 108 or more years. Evidence for this preservation includes preserved Late Triassic seawater δ13CDIC values and primary fluid inclusion data. Data also indicate that oversimplified statements based on bulk data from other petrographically-complex dolomite archives must be considered with caution.  相似文献   

4.
Abstract

The Upper Triassic Chang 8 Member, the eighth member of the Yanchang Formation, is a key reservoir interval in the Jiyuan area of the Ordos Basin. The reservoir quality of the Chang 8 Member tight sandstones is extremely heterogeneous owing to the widespread distribution of carbonate cements. The carbonate cements commonly develop near sandstone–mudstone interfaces and gradually decrease away from the interfaces to the centres of the sand bodies. However, the content of carbonate cements (≤6%) has a positive correlation with the visual porosity in the Chang 8 Member sandstone, revealing that the carbonate cements contribute to the compaction resistance and the residual primary pores of reservoirs during the diagenetic process. Three main types of carbonate cement are identified: type I (calcite), type II (calcite and ferrocalcite), and type III (dolomite and ankerite). The type I calcite is characterised by enriched δ13C (mean –3.41‰) and δ18O (mean –15.17‰) values compared with the type II (mean δ13C?=?–7.33‰, δ18O?=?–18.90‰) and type III (mean δ13C?=?–10.0‰, δ18O?=?–20.2‰) cements. Furthermore, the mean δ18O value (–4.7‰) of the type I pore fluids is 1.5‰ and 0.9‰ lower than the type II (mean –3.2‰) and type III (mean –3.8‰) pore fluids, respectively. This indicates that the evolving pore fluids experienced some relative strong water–rock interactions that provided the original materials (e.g. Ca2+, Fe3+, and Mg2+) for the carbonate cements during the diagenetic process. The highly saline lake water directly provided the primary material for the type I calcite precipitation, which also provided the material necessary for the precipitation of the type II and type III carbonate cements, causing enriched δ18O values of the pore fluids during the precipitation of the type II and type III carbonate cements. Although the earlier dissolved pores were filled with ferrocalcite, dolomite and ankerite in the middle–late diagenetic stages, some residual pores and fractures remained to become the potential reservoir storage spaces for the oil and gas exploration in the Jiyuan area.  相似文献   

5.
The Lower Permian Aldebaran Sandstone is the principal hydrocarbon reservoir in the Denison Trough (Bowen Basin), east-central Queensland, Australia. It accumulated in a wide range of fluvio-deltaic and nearshore marine environments. Detailed petrological study of the unit by thin section, X-ray diffraction, scanning electron microscopy, electron microprobe and isotopic analysis reveals a complex diagenetic history which can be directly related to depositional environment, initial composition and burial-temperature history. Early diagenetic effects included the precipitation of pyrite, siderite and illite-smectite rims (δ18O (SMOW) =+8.9 to + 11.3‰). Deep burial effects included physico-chemical compaction and the formation of quartz overgrowths, siderite (δ13C(PDB) =?34.0 to + 11.5‰, δ18O =?0.7 to +22.7‰), illite/illite-smectite and ankerite (δ13C=?9.3 to ?4.9‰) δ18O=+ 7.6 to + 14.4‰). Involved fluids were in part ‘connate meteoric’ water derived from compaction of the underlying freshwater Reids Dome beds. Important post-maximum burial effects, controlled by deep meteoric influx from the surface, were ankerite and labile grain dissolution and formation of kaolinite (δ18O=+7.8 to +8.9‰, δD=?115 to ?99‰), calcite (δ13C=?9.5 to +0.9‰, δ18O=+9.0 to +20.0‰) and dawsonite (δ13C=?4.0 to +2.3‰, δ18O=+9.8 to +19.8‰), the formation of dawsonite reflecting eventual stagnation of the aquifer. Entrapment of contained hydrocarbons was a relatively recent event which may be continuing today. Reservoir quality varies from marginal to good in the west to poor in the east, with predictable trends being directly linked to depositional environment and diagenesis.  相似文献   

6.
Early diagenetic dolomite beds were sampled during the Ocean Drilling Programme (ODP) Leg 201 at four reoccupied ODP Leg 112 sites on the Peru continental margin (Sites 1227/684, 1228/680, 1229/681 and 1230/685) and analysed for petrography, mineralogy, δ13C, δ18O and 87Sr/86Sr values. The results are compared with the chemistry, and δ13C and 87Sr/86Sr values of the associated porewater. Petrographic relationships indicate that dolomite forms as a primary precipitate in porous diatom ooze and siliciclastic sediment and is not replacing the small amounts of precursor carbonate. Dolomite precipitation often pre‐dates the formation of framboidal pyrite. Most dolomite layers show 87Sr/86Sr‐ratios similar to the composition of Quaternary seawater and do not indicate a contribution from the hypersaline brine, which is present at a greater burial depth. Also, the δ13C values of the dolomite are not in equilibrium with the δ13C values of the dissolved inorganic carbon in the associated modern porewater. Both petrography and 87Sr/86Sr ratios suggest a shallow depth of dolomite formation in the uppermost sediment (<30 m below the seafloor). A significant depletion in the dissolved Mg and Ca in the porewater constrains the present site of dolomite precipitation, which co‐occurs with a sharp increase in alkalinity and microbial cell concentration at the sulphate–methane interface. It has been hypothesized that microbial ‘hot‐spots’, such as the sulphate–methane interface, may act as focused sites of dolomite precipitation. Varying δ13C values from −15‰ to +15‰ for the dolomite are consistent with precipitation at a dynamic sulphate–methane interface, where δ13C of the dissolved inorganic carbon would likewise be variable. A dynamic deep biosphere with upward and downward migration of the sulphate–methane interface can be simulated using a simple numerical diffusion model for sulphate concentration in a sedimentary sequence with variable input of organic matter. Thus, the study of dolomite layers in ancient organic carbon‐rich sedimentary sequences can provide a useful window into the palaeo‐dynamics of the deep biosphere.  相似文献   

7.
《Applied Geochemistry》1995,10(5):531-546
The petrography, fluid inclusion thermometry and isotope geochemistry of diagenetic cements are used to reconstruct the pore-fluid history of the Middle Jurassic Brent Group reservoir sandstones in the Alwyn South area of the U.K. North Sea. The study focuses on a relatively limited area of three adjacent reservoir compartments at successively higher structural levels. The cement assemblage of kaolinite, quartz and illite has resulted in severe deterioration of otherwise good reservoir quality. Early precipitation of vermiform and late blocky kaolinite was succeeded by a period of relatively intense illite precipitation. Temperature estimates for kaolinite precipitation of 80°C andδ18O of ≈ + 15‰ (±3‰) suggest co-existing fluids ofδ18O ≈ −3‰. Quartz cementation overlapped both kaolinite and illite formation. Fluid inclusion data indicate that quartz cementation took place at temperatures of 109±7°C. Pore fluid salinities were ≈4 wt% NaCl with a H2OO isotopic composition of ≈ -1 %o ± 0.5‰ SMOW. The fluids which precipitated coexisting illite were compositionally homogeneous with equilibriumδ18O water compositions of +0.5‰ SMOW. Illite SD values range from −33 to −50‰ SMOW. These fluid inclusion and isotopic data suggest that both quartz and illite were precipitated from pore waters with a uniform, marine signature. This is consistent with the predominantly marine to paralic depositional context of the Brent Group in Alywn South. Illite precipitation was followed by hydrocarbon emplacement between the Middle Eocene and Lower Oligocene.  相似文献   

8.
This paper addresses the diagenesis of carbonate conglomerates in that it assesses the potential of conglomerates in refining the paragenetic history in complex structural areas, such as the Albanian foreland fold‐and‐thrust belt. Of major interest are stylolites (burial and tectonic) which are restricted to conglomerate fragments or which crosscut the conglomerate matrix. Based on the inferred age of stylolite development in relation to burial, uplift and tectonic history, and the Lower to Middle Miocene age of the conglomerates, the succession of diagenetic events was subdivided into several stages. The Poçem polymict transgressive carbonate conglomerate (Kremenara anticline, central Albania) was deposited in a shallow marine environment. These conglomerates are covered by intertidal rhodolithic packstones–grainstones. The stable‐isotope signature of these packstones–grainstones (δ18OV‐PDB = −1·0 to +0·7‰; δ13C = +1·0 to +1·4‰) plots is within the range of marine Early and Middle Miocene values. Shortly after deposition of the conglomerates, micritization, geopetal infill and acicular calcite cementation took place. A first calcite vein generation is interpreted as having formed from a Messinian brine during shallow burial. Burial stylolites developed during further burial in the Pliocene. These stylolites serve as an important diagenetic time marker. The post‐burial stylolite meteoric calcite vein cement probably precipitated during the following telogenetic stage. Karstification and calcite concretion precipitiation pre‐date overturning of the western limb of the anticline. Reopening of subvertical fractures and tectonic stylolites in the western limb of the Kremenara anticline, followed by oil migration, represents one of the latest diagenetic events. These fractures and stylolites provide major pathways for hydrocarbon production.  相似文献   

9.
Samples of chert nodules, diagenetic carbonates and evaporites (gypsum/anhydrite) collected from the gypsiferous limestones of the Kef Eddour Member (Ypressian‐Priabonian) near Metlaoui and Sehib (Tunisia) show selective silicification with great variety in the silicified by‐products. Based on δ13C values, which support an organic origin for the carbon, carbonates replaced evaporites microbially through bacterial sulphate reduction. Observations and results suggest two scenarios for chert formation that are related to the rate and timing of diagenetic carbonate replacement of the evaporites (anhydrite/gypsum). In the absence of early diagenetic carbonate phases, silica with δ18O values from +25 to +28·6‰ [standard mean ocean water (SMOW)] replaced the outer parts of anhydrite nodules at pH < 9. In contrast, pore‐fluid pH values > 9 in the innermost parts of the anhydrite nodules prevented silica precipitation. The record of this chemical barrier is preserved in the microquartz rims and geode features that formed in the inner parts of the nodules after dissolution of the anhydrite nucleus. The microbial diagenetic replacement of evaporites (bacterial sulphate reduction) by carbonates (calcite, aragonite and dolomite) favoured silica replacement of carbonates rather than evaporites. Silica, with δ18O signature of +21 to +26‰ (SMOW), replaced carbonates on a volume‐for‐volume basis, yielding a more siliceous groundmass, and accounting for 90–95% of the nodules. The relatively higher δ18O values of quartz replacing anhydrite can be explained by a diagenetic fluid in equilibrium with mixed (meteoric/marine) to marine water. The lower δ18O values of the quartz that replaced the diagenetic carbonates are ascribed to flushing by meteoric water in a later diagenetic stage. The silica supply for chert formation could be derived from the reworked bio‐siliceous deposits (diatomites) to the west of the basin [vestiges of an opal‐CT precursor undetectable by X‐ray diffraction (XRD) were revealed by δ29Si magic‐angle‐spinning nuclear magnetic resonance investigations], diagenesis of the extraformational and overlying clay‐rich beds (the host limestones are clay‐poor as shown by XRD measurements), and minor volcanogenic and hydrothermal contributions during early diagenetic stages.  相似文献   

10.
The Middle Muschelkalk (Middle Triassic) of the Catalan Coastal Range (north-east Spain) comprises sandstone, mudstone, anhydrite and minor carbonate layers. Interbedded sandstones and mudstones which are dominant in the north-eastern parts of the basin are terminal alluvial fan deposits. South-westward in the basin, the rocks become dominated by interbedded evaporites and mudstones deposited in sabkha/mudflat environments. The diagenetic and pore water evolution patterns of the Middle Muschelkalk suggest a strong facies control. During eodiagenesis, formation of microdolomite, anhydrite, baryte, magnesite, K-feldspar and mixed-layer chlorite/smectite was favoured within and adjacent to the sabkha/mudflat facies, whereas calcite, haematite, mixed-layer illite/smectite and quartz formed mainly in the alluvial facies. Low δ18OSMOW values for microdolomite (+23.7 to +28.4%) and K-feldspar overgrowths (+17.3 to +17.7%) suggest either low-temperature, isotopic disequilibrium or precipitation from low-18O porewaters. Low-18O waters might have developed, at least in part, during low-temperature alteration of volcanic rock fragments. During mesodiagenesis, precipitation of quartz overgrowths and coarse dolomite occurred in the alluvial sandstones, whereas recrystallization of microdolomite was dominant in the sabkha/mudflat facies. The isotopic compositions of these mesogenetic phases reflect increasing temperature during burial. Upon uplift and erosion, telogenetic calcite and trace haematite precipitated in fractures and replaced dolomite. The isotopic composition of the calcite (δ18OSMOW=+21.5 to +25.6%o; δ13C= 7.7 to - 5.6%o) and presence of haematite indicate infiltration of meteoric waters.  相似文献   

11.
Carbonate concretions in the Lower Carboniferous Caton Shale Formation contain diagenetic pyrite, calcite and barite in the concretion matrix or in different generations of septarian fissures. Pyrite was formed by sulphate reduction throughout the sediment before concretionary growth, then continued to form mainly in the concretion centres. The septarian calcites show a continuous isotopic trend from δ13C=?28·7‰ PDB and δ18O=?1·6‰ PDB through to δ13C=?6·9‰ PDB and δ18O=?14·6‰ PDB. This trend arises from (1) a carbonate source initially from sulphate reduction, to which was added increasing contributions of methanogenic carbonate; and (2) burial/temperature effects or the addition of isotopically light oxygen from meteoric water. The concretionary matrix carbonates must have at least partially predated the earliest septarian cements, and thus used the same carbonate sources. Consequently, their isotopic composition (δ13C=?12·0 to ?10·1‰ PDB and δ18O=?5·7 to ?5·6‰ PDB) can only result from mixing a carbonate cement derived from sulphate reduction with cements containing increasing proportions of carbonate from methanogenesis and, directly or indirectly, also from skeletal carbonate. Concretionary growth was therefore pervasive, with cements being added progressively throughout the concretion body during growth. The concretions contain barite in the concretion matrix and in septarian fissures. Barite in the earlier matrix phase has an isotopic composition (δ34S=+24·8‰ CDT and δ18O=+16·4‰ SMOW), indicating formation from near‐surface, sulphate‐depleted porewaters. Barites in the later septarian phase have unusual isotopic compositions (δ34S=+6 to +11‰ CDT and δ18O=+8 to +11‰ SMOW), which require the late addition of isotopically light sulphate to the porewaters, either from anoxic sulphide oxidation (using ferric iron) or from sulphate dissolved in meteoric water. Carbon isotope and biomarker data indicate that oil trapped within septarian fissures was derived from the maturation of kerogen in the enclosing sediments.  相似文献   

12.
In the late Carnian (Late Triassic), a carbonate‐clastic depositional system including a distal alluvial plain, flood basin and sabkha, tidal flat and shallow carbonate lagoon was established in the Dolomites (Northern Italy). The flood basin was a muddy supratidal environment where marine carbonates and continental siliciclastics interfingered. A dolomite phase made of sub‐micrometre euhedral crystals with a mosaic microstructure of nanometre‐scale domains was identified in stromatolitic laminae of the flood basin embedded in clay. This dolomite is interpreted here as primary and has a nearly stoichiometric composition, as opposed to younger early diagenetic (not primary) dolomite phases, which are commonly calcian. This primary dolomite was shielded from later diagenetic transformation by the clay. The stable isotopic composition of dolomite was analyzed along a depositional transect. The δ13C values range between ca ?6‰ and +4‰, with the most 13C‐depleted values in dolomites of the distal alluvial plain and flood basin, and the most 13C‐enriched in dolomites of the tidal flat and lagoon. Uniform δ18O values ranging between 0‰ and +3‰ were found in all sedimentary facies. It is hypothesized that the primary dolomite with mosaic microstructure nucleated on extracellular polymeric substances secreted by sulphate reducing bacteria. A multi‐step process involving sabkha and reflux dolomitization led to partial replacement and overgrowth of the primary dolomite, but replacement and overgrowth were facies‐dependent. Dolomites of the landward, clay‐rich portion of the sedimentary system were only moderately overgrown during late dolomitization steps, and partly retain an isotopic signature consistent with bacterial sulphate reduction with δ13C as low as ?6‰. In contrast, dolomites of the marine, clay‐free part of the system were probably transformed through sabkha and reflux diagenetic processes into calcian varieties, and exhibit δ13C values of ca +3‰. Major shifts of δ13C values strictly follow the lateral migration of facies and thus mark transgressions and regressions.  相似文献   

13.
The Early Jurassic dolomitized carbonates are a hydrocarbon exploration target in Northern Italy. Of these carbonates, the Liassic Albenza Formation platform and the overlying Sedrina Formation shelf were studied to define a pervasive dolomitization model and to shed light on dolomite distribution in the sub‐surface. Field work, as well as analyses of well cores, stable isotopes, trace elements and fluid inclusions, was carried out on the outcropping thrust belt and sub‐surface deformed foreland of the Southern Alps. Petrographic analyses showed a first, pervasive, replacement dolomitization phase (D1) followed by volumetrically less important dolomite cement precipitation phases (D2, D3 and D4). The δ18O values fall between ?8·2‰ and 0·1‰ Vienna‐Pee Dee Belemnite with the more depleted samples belonging to dolomite cement‐rich dolostones; the δ13C ranges from 2·6‰ to 3·7‰ Vienna‐Pee Dee Belemnite. Analysis of trace elements showed different Fe and Mn contents in the sub‐surface and outcropping dolostones, and a higher Fe in the younger dolomite cements. An increase in the precipitation temperature (up to 130 °C from fluid inclusion data) and a decrease in diagenetic fluid salinity (from sea water to brackish) are observed from the first pervasive replacement dolomite to the dolomite cement phases. Field observations indicate that, in the Albenza Formation, dolomitization was limited to palaeohighs or faulted platform margins in the Early Jurassic carbonates. The pervasive replacement phase is interpreted based on a ‘compaction model’; the formation fluids expelled from compacting basinal carbonates could have funnelled along faults into permeable palaeohighs. The high homogenization temperature of the dolomite cements and decreased salinities indicate precipitation at great depth with an influx of meteoric water. These data, along with the thermal history, suggest that the dolomite cements precipitated according to the ‘tectonic squeegee’ dolomitization model. The dolomite precipitation temperature was set against the thermal history of the carbonate platform to interpret the timing of dolomite precipitation. The dolomite precipitation temperatures (90 to 100 °C) were reached in the studied formations first in the thrust fold belt (Early Tertiary, 60 Ma), and then in the foreland succession during the Late Tertiary (10 Ma). This observation suggests that the dolomite precipitation fronts moved southwards over time, recording a ‘diagenetic wave’ linked to the migration of the orogenic system. Observations suggest that the porosity increased during the first phase of replacement dolomitization while the dolomite cementation phases partially occluded the pores. The distribution of porous dolomitized bodies is therefore linked to the ‘compaction dolomitization’ model.  相似文献   

14.
Sulfur isotopic disequilibrium is commonly observed between associated pyrite and copper sulfides in NW Queensland. A sulfur isotopic study of copper mineralization in dolomites at Paradise Valley and arenites at Mammoth has allowed the significance of such disequilibrium to be evaluated. Copper mineralization at Paradise Valley is characterized by a greater enrichment in 34S, with δ34S values often greater than +30‰, for both copper sulfides and associated syngenetic/diagneetic pyrite. At Mammoth, copper sulfides have isotopic compositions (δ34S=?15.9 to ?0.3‰) transitional between disseminated syngenetic/diagenetic pyrite (δ34S=?5.7 to ?1.7‰) and epigenetic vein pyrite (δ34S=?17.9 to ?7.1‰) suggesting progressive reaction and replacement of syngenetic/diagenetic pyrite by a copper-bearing mineralizing fluid under oxidizing conditions. The isotopic data, within the constraints imposed by geological and geochemical factors, support a model of reaction between copper-bearing mineralizing fluids and pre-existing syngenetic/diagenetic pyrite for both the carbonate- and arenite-hosted deposits.  相似文献   

15.
《Sedimentary Geology》2006,183(1-2):51-69
The Chicxulub Sedimentary Basin of the northwestern Yucatan Peninsula, Mexico, which was formed because of the largest identified Phanerozoic bolide impact on Earth, became a site of deposition of dominantly marine carbonate sediments during most of the Cenozoic Era. This is a study of the filling and diagenetic history of this basin and surrounding areas. The study makes use of lithologic, biostratigraphic, petrographic, and geochemical data obtained on core samples from boreholes drilled throughout the northwestern Yucatan Peninsula.The core sample data indicate that: 1) The Chicxulub Sedimentary Basin concentrated the deposition of pelagic and outer-platform sediments during the Paleocene and Eocene, and, in places, during the Early Oligocene, as well, and filled during the Middle Miocene, 2) deeper-water limestone also is present within the Paleocene and Lower Eocene of the proposed Santa Elena Depression, which is located immediately south of the Basin, 3) shallow-water deposits are relatively more abundant outside the Basin and Depression than inside, 4) the autigenic and allogenic silicates from the Paleogene formations are the most abundant inside the Depression, 5) sediment deposition and diagenesis within the Basin also were controlled by impact crater topography, 6) the abundance of the possible features of subaerial exposure increases upward and outward from the center of the Basin, and 7) the formation of replacive low-magnesium calcite and dolomite, dedolomitization, dissolution, and precipitation of vug-filling calcite and dolomite cement have been more common outside the Basin than inside.δ18O in whole-rock (excluding vug-filling) calcite from core samples ranges from − 7.14‰ to + 0.85‰ PDB. δ13C varies from − 6.92‰ to + 3.30‰ PDB. Both stable isotopes correlate inversely with the abundance of subaerial exposure features indicating that freshwater diagenesis has been extensive especially outside and at the edge of the Chicxulub Sedimentary Basin.δ18O and δ13C in whole-rock (excluding vug-filling) dolomite ranges from − 5.54‰ to + 0.87‰ PDB and − 4.63‰ to + 3.38‰ PDB, respectively. Most dolomite samples have negative δ18O and positive δ13C suggesting that replacive dolomitization involved the presence of a fluid dominated by freshwater and/or an anomalously high geothermal gradient.Most dolomite XRD-determined mole percent CaCO3 varies between 51 and 56. Replacive dolomite is larger, more euhedral, and less stoichiometric inside the Chicxulub Sedimentary Basin than outside.  相似文献   

16.
The oxygen and carbon isotopic compositions of Upper Cretaceous chalk have been studied from a large number of outcrops and boreholes in the Danish sub-basin and the North Sea Central Graben. The carbon isotopic compositions vary from +0.50%o to +3.00%oδ13C which correspond to the expected carbon isotopic composition of carbonate precipitated from normal sea water. The oxygen isotopic compositions of samples from outcrops and near-surface drilled sections fall in the range from —0.50%o to — 2.00%oδ18O, which is close to the expected values for carbonate produced by coccoliths in the Late Cretaceous sea. A geographic distribution exists in the Danish sub-basin showing relatively heavy oxygen isotope values in the centre of the basin and slightly more negative values in the eastern part of the basin. Primarily the phenomenon is thought to reflect minor variations in the oceanographic parameters in the Late Cretaceous sea. The deep subsurface sections represent a depth interval of 0–3100 m. Mechanical compaction in the uppermost part of the sequences apparently has no influence on the isotopic composition. Chemical compaction dominates at greater depth, leading to temperature-induced isotopic re-equilibration in the water-rock system. In these sequences the oxygen isotope values range from ? 1.50%o to — 7.50%oδ18O and are significantly correlated with depth of burial, cementation and porosity. The data indicate that pressure-dissolution, recrystallization, reprecipitation and ion-exchange between solid carbonate phase and pore water, are all actively involved in the oxygen isotope re-equilibration process. This process is believed to take place in a diagenetically closed system and is tentatively divided into two phases: 1) an early diagenetic phase which takes place at porosities down to approximately 20% in which the chalk possesses a pore-water controlled isotopic re-equilibration system and 2) a late diagenetic phase at porosities below 20% in which the re-equilibration process increasingly becomes influenced by the rock-introduced isotopic change in the composition of the formation water.  相似文献   

17.
The calcite fossils of the Derbyhaven Beds, Isle of Man, have δ13C values (+ 1·8 PDB) similar to modern, shallow-water marine skeletons, but the δ18O values (?6·1 PDB) are much lighter than modern skeletons. The light oxygen values indicate either re-equilibration with isotopically light water before cementation started, or Carboniferous sea water with δ18O of ?6‰. Aragonite dissolution was followed by precipitation of zoned calcite cement. In this cement, up to six intracrystalline zones, recognized in stained thin sections, show isotopic variation. Carbon varies from + 3-8 to + 1-2‰. and oxygen from ? 2-6 to ? 12-4‰. with decreasing age of the cement. This trend is attributed to increasing temperature and to isotopic evolution of the pore waters during burial. The zoned calcite is sequentially followed by dolomite and kaolinite cements which continue the trend towards light isotopic values. This trend is continued with younger, fault-controlled dolomite, and is terminated by vein-filling calcite and dolomite. The younger calcite, interpreted as a near-surface precipitate from meteoric waters, is unrelated to the older sequence of carbonates and has distinctly different carbon isotope ratios: δ13C ? 6-8‰.  相似文献   

18.
Late Devonian (Famennian) marine successions globally are typified by organic-rich black shales deposited in anoxic and euxinic waters and the cessation of shelf carbonate sedimentation. This global ‘carbonate crisis’, known as the Hangenberg Event, coincides with a major extinction of reef-building metazoans and perturbations to the global carbon cycle, evidenced by positive carbon-isotope excursions of up to 4‰. It has been suggested that authigenic carbonate, formed as cements in sedimentary pore spaces during early burial diagenesis, is a significant mass fraction of the total global carbon burial flux, particularly during periods of low oxygen concentration. Because some authigenic carbonate could have originated from remineralization of organic carbon in sediments, it is possible for this reservoir to be isotopically depleted and thereby drive changes in the carbon isotopic composition of seawater. This study presents bulk isotopic and elemental analyses from fine-grained siliciclastics of the Late Devonian–Early Mississippian Bakken Formation (Williston Basin, USA) to assess the volume and isotopic composition of carbonates in these sediments. Carbonate in the Bakken black shales occurs primarily as microscopic disseminated dolomite rhombs and calcite cements that, together, comprise a significant mass-fraction (ca 9%). The elemental composition of the shales is indicative of a dynamic anoxic to sulphidic palaeoenvironment, likely supported by a fluctuating chemocline. Despite forming in an environment favourable to remineralization of organic matter and the precipitation of isotopically depleted authigenic carbonates, the majority of carbon isotope measurements of disseminated carbonate fall between −3‰ and +3‰, with systematically more depleted carbonates in the deeper-water portions of the basin. Thus, although there is evidence for a significant total mass-fraction of carbonate with contribution from remineralized organic matter, Bakken authigenic carbonates suggest that Famennian black shales are unlikely to be sufficiently 13C-depleted relative to water column dissolved inorganic carbon to serve as a major lever on seawater isotopic composition.  相似文献   

19.
Most vein minerals deposited in fractures of the Jialingjiang Formation from Libixia section,Hechan area include a large amount of saddle dolomite and accompanying celestite,calcite and fluorite.This study analyzed the nature,source,evolution of the fluids by plane-light petrography,fluid-inclusion methods,cathodoluminescence images,and stable isotopic compositions.The homogenization temperatures of two-phase aqueous fluid inclusions in dolomite range between100 and 270℃.Combined with theδ~(18)O data,it is suggested that the fluid responsible for the precipitation of fracture fillings haveδ~(18)O values between 10‰and 18‰(relative to SMOW).The saddle dolomite and the accompanying minerals were the result of activity of dense brines at elevated temperatures.Moreover,analysis shows that the fluid was derived from a mixture of marine-derived brine and deeper circulating flow.This fluid was enriched in Sr during diagenesis and formed celestite in fracture and for regional mineralization.Dissolution of saddle dolomite was attributed to the cooling of Mg/Ca-decreased fluids,which may relate to a leaching of gypsum to celestite in surrounding carbonates.  相似文献   

20.
The surface sediments of two mud mounds (“Mound 11” and “Mound 12”) offshore southwest Costa Rica contain abundant authigenic carbonate concretions dominated by high-Mg calcite (14–20 mol-% MgCO3). Pore fluid geochemical profiles (sulfate, sulfide, methane, alkalinity, Ca and Mg) indicate recent carbonate precipitation within the zone of anaerobic oxidation of methane (AOM) at variable depths. The current location of the authigenic carbonate concretions is, however, not related to the present location of the AOM zone, suggesting mineral precipitation under past geochemical conditions as well as changes in the flow rates of upward migrating fluids. Stable oxygen and carbon isotope analysis of authigenic carbonate concretions yielded δ18Ocarbonate values ranging between 34.0 and 37.7 ‰ Vienna standard mean ocean water (VSMOW) and δ13Ccarbonate values from ?52.2 to ?14.2 ‰ Vienna Pee Dee belemnite (VPDB). Assuming that no temperature changes occurred during mineral formation, the authigenic carbonate concretions have been formed at in situ temperature of 4–5 °C. The δ18Ocarbonate values suggest mineral formation from seawater-derived pore fluid (δ18Oporefluid = 0 ‰ VSMOW) for Mound 12 carbonate concretions but also the presence of an emanating diagenetic fluid (δ18Oporefluid ≈5 ‰) in Mound 11. A positive correlation between δ13Ccarbonate and δ18Ocarbonate is observed, indicating the admixing of two different sources of dissolved carbon and oxygen in the sediments of the two mounds. The carbon of these sources are (1) marine bicarbonate (δ13Cporefluid ≈0 ‰) and (2) bicarbonate which formed during the AOM (δ13Cporefluid ≈?70 ‰). Furthermore, the δ18Oporefluid composition, with values up to +4.7 ‰ Vienna standard mean ocean water (VSMOW), is interpreted to be affected by the presence of emanating, freshened and boron-enriched fluids. Earlier, it has been shown that the origin of 18O-enriched fluids are deep diagenetic processes as it was indicated by the presence of methane with thermogenic signature (δ13CCH4 = ?38 ‰). A combination of present geochemical data with geophysical observations indicates that Mounds 11 and 12 represent a single fluid system interconnected by deep-seated fault(s).  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号