首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 46 毫秒
1.
Based on GPS velocity during 1999-2007, GPS baseline time series on large scale during 1999-2008 and cross-fault leveling data during 1985-2008, the paper makes some analysis and discussion to study and summarize the movement, tectonic deformation and strain accumulation evolution characteristics of the Longmenshan fault and the surrounding area before the MS8.0 Wenchuan earthquake, as well as the possible physical mechanism late in the seismic cycle of the Wenchuan earthquake. Multiple results indicate that:GPS velocity profiles show that obvious continuous deformation across the eastern Qinghai-Tibetan Plateau before the earthquake was distributed across a zone at least 500km wide, while there was little deformation in Sichuan Basin and Longmenshan fault zone, which means that the eastern Qinghai-Tibetan Plateau provides energy accumulation for locked Longmenshan fault zone continuously. GPS strain rates show that the east-west compression deformation was larger in the northwest of the mid-northern segment of the Longmenshan fault zone, and deformation amplitude decreased gradually from far field to near fault zone, and there was little deformation in fault zone. The east-west compression deformation was significant surrounding the southwestern segment of the Longmenshan fault zone, and strain accumulation rate was larger than that of mid-northern segment. Fault locking indicates nearly whole Longmenshan fault was locked before the earthquake except the source of the earthquake which was weakly locked, and a 20km width patch in southwestern segment between 12km to 22.5km depth was in creeping state. GPS baseline time series in northeast direction on large scale became compressive generally from 2005 in the North-South Seismic Belt, which reflects that relative compression deformation enhances. The cross-fault leveling data show that annual vertical change rate and deformation trend accumulation rate in the Longmenshan fault zone were little, which indicates that vertical activity near the fault was very weak and the fault was tightly locked. According to analyses of GPS and cross-fault leveling data before the Wenchuan earthquake, we consider that the Longmenshan fault is tightly locked from the surface to the deep, and the horizontal and vertical deformation are weak surrounding the fault in relatively small-scale crustal deformation. The process of weak deformation may be slow, and weak deformation area may be larger when large earthquake is coming. Continuous and slow compression deformation across eastern Qinghai-Tibetan Plateau before the earthquake provides dynamic support for strain accumulation in the Longmenshan fault zone in relative large-scale crustal deformation.  相似文献   

2.
Re-measured GPS data have recently revealed that a broad NE trending dextral shear zone exists in the eastern Bayan Har block about 200 km northwest of the Longmenshan thrust on the eastern margin of the Qinghai-Tibet Plateau. The strain rate along this shear zone may reach up to 4-6 mm/a. Our interpretation of satellite images and field observations indicate that this dextral shear zone corresponds to a newly generated NE trending Longriba fault zone that has been ignored before. The northeast segment of the Longriba fault zone consists of two subparallel N54°±5°E trending branch faults about 30 km apart, and late Quaternary offset landforms are well developed along the strands of these two branch faults. The northern branch fault, the Longriqu fault, has relatively large reverse component, while the southern branch fault, the Maoergai fault, is a pure right-lateral strike slip fault. According to vector synthesizing principle, the average right-lateral strike slip rate along the Longriba fault zone in the late Quaternary is calculated to be 5.4±2.0 mm/a, the vertical slip rate to be 0.7 mm/a, and the rate of crustal shortening to be 0.55 mm/a. The discovery of the Longriba fault zone may provide a new insight into the tectonics and dynamics of the eastern margin of the Qinghai-Tibet Plateau. Taken the Longriba fault zone as a boundary, the Bayan Har block is divided into two sub-blocks: the Ahba sub-block in the west and the Longmenshan sub-block in the east. The shortening and uplifting of the Longmenshan sub-block as a whole reflects that both the Longmenshan thrust and Longriba fault zone are subordinated to a back propagated nappe tectonic system that was formed during the southeastward motion of the Bayan Har block owing to intense resistance of the South China block. This nappe tectonic system has become a boundary tectonic type of an active block supporting crustal deformation along the eastern margin of the Qinghai-Tibet Plateau from late Cenozoic till now. The Longriba fault zone is just an active fault zone newly-generated in late Quaternary along this tectonic system.  相似文献   

3.
A continuous GPS array across the southern segment of the Longmenshan fault zone recorded the deformation during the process of the Lushan MS7.0 earthquake that occurred on April 20, 2013. Such data can provide meaningful information regarding the dynamic evolution of crustal deformation in the seismogenic zone. Our studies have shown that the occurrence of the Wenchuan earthquake led to the loading of compressive and sinistral shearing strain on the southern segment of the Maoxian-Wenchuan fault, whereby the extrusion strain accumulated at a greater rate than before the Wenchuan earthquake. The strain time series in the seismogenic zone revealed that the principal compression strain rates decreased from west to east in the direction of N30°–45°W. Furthermore, the area to the east of Beichuan-Yingxiu fault behaved as a zone of compressive deformation with obvious sinistral shearing deformation. The surface strain and the first shearing strain time series decreased with time, while the area to the west of the Beichuan-Yingxiu fault behaved as a zone of dextral shear deformation that increased with time. Furthermore, the regional deformation field before the Lushan earthquake showed that the rate of extrusion strain accumulation in the southern segment of the Longmenshan fault zone was obviously larger than before the Wenchuan earthquake. Moreover, the sinistral shearing strain accumulated in the area of the southern segment of the Maoxian-Wenchuan fault. Based on the above analysis, we consider that the eastward movement of the Bayan Har block increased considerably following the Wenchuan earthquake, which enhanced the accumulation of compression strain in the southern segment of the Longmenshan fault zone.  相似文献   

4.
We have collected GPS data in the period of 1999-2007 from the Crustal Motion Observation Network of China along the Zhangjiakou-Bohai fault and its adjacent regions to study the characteristics of present-day crustal horizontal motion velocities in the research zone.Strain rate components are computed in the spheric coordinate system by the least square collocation method.According to the spatial distribution of the principal strain rate,dilation rate and maximum shear strain rate derived from GPS measurements,this paper analyses the deformation of the subordinary faults of the Zhangjiakou-Bohai fault.The principal compression strain rates are apparently greater than the principal extension strain rates.The larger shear strain rate is mainly in and around the Xianghe,Wenan and Tangshan areas in Hebei Province.According to the profiles across different segments of the Zhangjiakou-Bohai fault,the three segments glong the Zhangjiakou-Bohai fault show an obviously left-lateal strike-slip and compression characteristics.By analysis of the motion characteristics of the blocks,e.g.the Yanshan block,North China Plain block,Ordos block,and Ludong-Huanghai block in and around the North China region,this paper speculates that the dynamics of the motion styles of Zhangjiakou-Bohai fault may directly come from the relative movement between the Yanshan block and the North China plain block,and the ultimate dynamics may be the results of the collison between Indian plate and Eurasian plate,and the persistent northeastward extrusion of the Indian plate.  相似文献   

5.
Based on the GPS velocity field data of 1999-2007 and 2011-2013,we used the least squares configuration method and GPS velocity profile results to synthetically analyze the dynamic evolution characteristics of crustal deformation in the Yunnan area before and after the Wenchuan earthquake. The dynamic evolution of GPS velocity field shows that the direction is gradually changed from the south in the southern part of the Sichuan-Yunnan block to the south-west in the southern Yunnan block and there is a clear relative motion characteristic near the block boundary fault zone. Compared with the GPS velocity of 1999-2007, the results of 2011-2013 also reflect segmental deformation characteristics of the block boundary fault zone. Southeast movement shows a significant increase, which may be related to crustal deformation adjustment after the Wenchuan earthquake. The dynamic evolution of strain parameters shows a pattern of "extension in the middle and compression at both ends" in the whole area and the distribution of deformation (shear, extension or compression) is closely related to the background motion and deformation characteristics of the main fault zone. Compared with the results of the period of 1999-2007, the extensional deformation zone of 2011-2013 is expanded eastward and southward. The compressional deformation of the eastern boundary (the Xiaojiang fault zone) of the Sichuan-Yunnan block is no longer significant, which is mainly concentrated in the northern section of the Xiaojiang fault zone and may be related to the post-seismic deformation adjustment of the Wenchuan earthquake. The GPS velocity profile results show that the left-lateral slip velocity of the Xiaojiang fault zone reduced gradually from north to south (10mm/a-5mm/a), and the width of the northern section is wider. The right-lateral slip rate of the Honghe fault zone is about 4mm/a, and the deformation width is wider. The dynamic results show that the Wenchuan earthquake has little effect on the deformation modes of these two fault zones.  相似文献   

6.
Based on high-precision data obtained in the past decade from GPS re-measurement in the North China Network, the Crustal Movement Observation Network of China (CMONOC) and GPS measurement along the Shanxi graben zone, the status and evolution of horizontal crustal movement in the North China region are analyzed. The results show that (1) the Yanshan tectonic zone (Zhangjiakou-Bohai Sea zone)is an active one with the largest horizontal strain in the North China region; The largest tendency differential movement of adjacent blocks is seen between the Yanshan block and the North China plain block; about 2mm/a (left lateral) ; (2)The significant horizontal differential movement along the boundaries of the North China region is characterized by right-lateral strike-slip movement at the middle-north segment on its west boundary (composed of Yinchuan and other active tectonic zones) and compressive movement at the south segment; while the Yinshan rift zone located along the west segment on its north boundary is dominated by tensile movement. Other boundaries and zones have no obvious differential movement; (3) On the whole, measurements of each period differ from one another, which might result from the nonlinear movement component as well as from the error effect. In the paper, results of the relative movement and strain in different periods are given for different blocks and boundary zones.  相似文献   

7.
To study the crustal movement in the vicinity of the epicenter before the Zhangye MS5.0 earthquake in 2019, the characteristics of crustal deformation before the earthquake are discussed through the GPS velocity field analysis based on the CMONOC data observed from GPS. The baseline time series between two continuous GPS stations and the strain time series of an area among several stations are analyzed in the epicenter area. The resulting time series of baseline azimuth around the epicenter reflects that the energy of the fault in the northern margin of Qilian Mountain is accumulated continuously before 2017. Besides, the movement trend of azimuth slows down after 2017, indicating the stress accumulation on both sides of the seismogenic fault zone has reached a certain degree. The first shear strain and EW-direction linear strain in the epicentral area of the Zhangye MS5.0 earthquake remain steady after 2017, and the surface strain rate decreases gradually after 2016. It is illustrated that there is an obvious deformation loss at the epicentral region three years before the earthquake, indicating that a certain degree of strain energy is accumulated in this area before the earthquake.  相似文献   

8.
We obtained the 2-D P-wave velocity structure of the lithosphere in the eastern North China Craton, Shanxi fault subsidence zone, and Yinchuan-Hetao fault subsidence zone by ray tracking technology based on six groups of clearly identified crustal phases and one group of lithospheric interface reflection phases from seismic recording sections of 21 shots along the 1300-km-long Yancheng-Baotou deep seismic wide-angle reflection/refraction profile. The results indicate significant differences between the lithospheric structure east and west of the Taihang Mountains, which is a gravity-gradient zone as well as a zone of abrupt change in lithospheric thickness and a separation zone of different rock components. East of the Taihang Mountains, the Mesozoic and Cenozoic lithospheric structure of the North China Craton has undergone strong reformation and destruction, resulting in the lithosphere thickness decreasing to 70–80 km. The North China Basin has a very thick Cenozoic sedimentary cover and the deepest point of crystalline basement is about 7.0 km, with the crustal thickness decreasing to about 31.0 km. The crystalline basement of the Luxi uplift zone is relatively shallow with a depth of 1.0–2.0 km and crustal thickness of 33.0–35.0 km. The Subei Basin has a thicker Cenozoic sedimentary cover and the bottom of its crystalline basement is at about 5.0–6.0 km with a crustal thickness of 31.0–32.0 km. The Tanlu fault is a deep fracture which cuts the lithosphere with a significant velocity structure difference on either side of the fault. The Tanlu fault plays an important role in the lithospheric destruction in the eastern part of the North China Craton. West of the Taihang Mountains, the crustal thickness increases significantly. The crust thickness beneath the Shanxi fault depression zone is about 46 km, and there is a low-velocity structure with a velocity of less than 6.1 km s?? in the upper part of the middle crust. Combined with other geophysical study results, our data shows that the lithospheric destruction at the Shaanxi-Shanxi fault depression zone and the Yinchuan-Hetao rift surrounding the Ordos block is non-uniform. The lithosphere thickness is about 80–90 km in the Datong-Baotou area, 75–137 km at the Dingxiang-Shenmu region, and about 80–120 km in the Anyang-Yichuan area. The non-uniform lithospheric destruction may be related to the ancient tectonic zone surrounding the Ordos block. This zone experienced multi-period tectonic events in the long-term process of its tectonic evolution and was repeatedly transformed and weakened. The weakening level is related to the interactions with the Ordos block. The continental collision between the Cenozoic India and Eurasia plates and N-E thrusting by the Qinghai Tibet Plateau block is causing further reformation and reduction of the lithosphere.  相似文献   

9.
The nearly EW-trending East Kunlun fault zone is the north boundary of the Bayan Har block.The activity characteristics and the position of the eastern end of its eastward extension are of great significance to probing into the dynamic mechanism of formation of the east edge of the Tibetan Plateau,and also lay the foundation for seismic risk assessment of the fault zone.The following results are obtained by analysis based on satellite image interpretation of landforms,surface rupture survey,terrace scarp deformation survey,and terrace dating data on the eastern part of the East Kunlun fault zone:(1)the Luocha segment is a Holocene active fault,where a reverse L-shape paleoearthquake surface rupture zone of about 50 km long is located;(2)the Luocha segment is characterized by left-lateral slip movement under the compression-shear condition since the later period of the Late Pleistocene,with a rate of 7.68–9.37 mm/a and a vertical slip rate of 0.7–0.9 mm/a,which are basically in accord with the activity rate of segments on its west side.The results indicate that it is a part of eastward extension of the East Kunlun fault zone;(3)the high-speed linear horizontal slip of the nearly EW-trending East Kunlun fault zone is blocked by the South China block at east,and transforms into the vertical movement of the nearly SN-NNE trending Minjiang fault zone and the Longmenshan fault zone,and the uplift of Longmenshan and Minjiang.The area where transform of the two tectonic systems occurred confines the position of the east end;(4)Luocha segment and Maqu segment constitute the"Maqu seismic gap",so,seismic risk at Maqu segment is higher than that at Luocha segment,which should attract more attention.  相似文献   

10.
First of all,using the GPS velocity field from campaign GPS measurements implemented by CMONC( C hina Crustal Movement Observation) a nd TEONC( C hina Tectonic Environment Observation Networks) u p to 2013, w e analyzed the background of regional crustal horizontal movement and deformation before the M S7. 3 Yutian,Xinjiang earthquake on February 12,2014. Then,by comparing this to the vertical movement from leveling measurements,we studied the crustal movement deformation and the state of strain accumulation on the northeastern edge of Qinghai-Tibetan block.Finally,we investigated the possible effects on the earthquake activity of the northeastern edge of Tibet from the M S7. 3 Yutian earthquake. The result indicates that,the M S7. 3Yutian earthquake occurred against the background of strong tectonic movement and intensive intracontinental crustal differential movement on the edges of tectonic blocks in western China,and also that it happened in the period of the strong tectonic stress field in Qinghai-Tibetan block and its edges. The sinistral strike-slip and stress transfer of the Yutian M S7. 3 earthquake may accelerate the rupture of fault segments with high strain accumulation at the northeastern edge of Qinghai-Tibetan block( especially in Qilian Mountain fault zone,and border area of Gansu,Qinghai and Sichuan provinces on the south of western Qinling).  相似文献   

11.
12.
13.
《国际泥沙研究》2014,(4):F0003-F0003
  相似文献   

14.
《国际泥沙研究》2014,(2):F0003-F0003
  相似文献   

15.
《国际泥沙研究》2014,(3):F0003-F0003
  相似文献   

16.
17.
The partitioning of rain water into throughfall, stemflow and interception loss when passing through plant canopies depends on properties of the respective plant species, such as leaf area and branch angles. In heterogeneous vegetation, such as tropical forest or polycultural systems, the presence of different plant species may consequently result in a mosaic of situations with respect to quantity and quality of water inputs into the soil. As these processes influence not only the water availability for the plants, but also water infiltration and nutrient leaching, the understanding of plant effects on the repartitioning of rain water may help in the optimization of land use systems and management practices. We measured throughfall and stemflow in a perennial polyculture (multi‐strata agroforestry), monocultures of peach palm (Bactris gasipaes) for fruit and for palmito, a monoculture of cupuaçu (Theobroma grandiflorum), spontaneous fallow and primary forest during one year in central Amazonia, Brazil. The effect on rain water partitioning was measured separately for four useful tree species in the polyculture and for two tree species in the primary forest. Throughfall at two stem distances, and stemflow, differed significantly between tree species, resulting in pronounced spatial patterns of water input into the soil in the polyculture system. For two tree species, peach palm for fruit (Bactris gasipaes) and Brazil nut trees (Bertholletia excelsa), the water input into the soil near the stem was significantly higher than the open‐area rainfall. This could lead to increased nutrient leaching when fertilizer is applied close to the stem of these trees. In the primary forest, such spatial patterns could also be detected, with significantly higher water input near a palm (Oenocarpus bacaba) than near a dicotyledonous tree species (Eschweilera sp.). Interception losses were 6·4% in the polyculture, 13·9 and 12·3% in the peach palm monocultures for fruit and for palmito, respectively, 0·5% in the cupuaçu monoculture and 3·1% in the fallow. With more than 20% of the open‐area rainfall, the highest stemflow contributions to the water input into the soil were measured in the palm monocultures and in the fallow. Copyright © 1999 John Wiley & Sons, Ltd.  相似文献   

18.
A procedure for short-term rainfall forecasting in real-time is developed and a study of the role of sampling on forecast ability is conducted. Ground level rainfall fields are forecasted using a stochastic space-time rainfall model in state-space form. Updating of the rainfall field in real-time is accomplished using a distributed parameter Kalman filter to optimally combine measurement information and forecast model estimates. The influence of sampling density on forecast accuracy is evaluated using a series of a simulated rainfall events generated with the same stochastic rainfall model. Sampling was conducted at five different network spatial densities. The results quantify the influence of sampling network density on real-time rainfall field forecasting. Statistical analyses of the rainfall field residuals illustrate improvement in one hour lead time forecasts at higher measurement densities.  相似文献   

19.
Red tide, a recurrent phenomenon has become conspicuous in several Kashmir lake ecosystems since 1991. The responsible organism (Euglena pedunculata), a rare flagellate rediscovered in the Kashmir Himalaya (Khan 1993) caused first and unprecedented red tide outbreak, constituting a maximum of 96% of resident numerical phytoplankton density in Dal Lake. At present, conflicting hypotheses exist on the generation of causal assemblage(s) imparting redness to waters: Jeeji Bai (1991) linked its origin to acid precipitation – a fallout of burning oil‐fields during the Gulf War – whilst Khan (1993) holds local factor(s) responsible. Field/experimental studies support the latter contention that the influx of untreated sewage, in unison with warm temperatures, high levels of PhAR, iron and interruption to hydrological flow‐pattern together with absence/or reduction in grazing activity created conducive environmental milieu for red tide outbreak. Dal Lake “red tide” drifted the bloom‐inoculum to other waters, including Lake Wular, where additional ecological niches were carved out, threatening the aesthetic value and biological diversity of Kashmir lakes. Ecological monitoring indicates frequent seasonal red tide occurrence in Dal Lake (including summer‐autumn event of 1998) which testifies its unabated eutrophication status. Further studies are needed on ecological adaptability and biogeographic distribution of this rare and unique red tide‐causing flagellate.  相似文献   

20.
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号