首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
In 2001 and 2002, Australia acquired an integrated geophysical data set over the deep-water continental margin of East Antarctica from west of Enderby Land to offshore from Prydz Bay. The data include approximately 7700 km of high-quality, deep-seismic data with coincident gravity, magnetic and bathymetry data, and 37 non-reversed refraction stations using expendable sonobuoys. Integration of these data with similar quality data recorded by Japan in 1999 allows a new regional interpretation of this sector of the Antarctic margin. This part of the Antarctic continental margin formed during the breakup of the eastern margin of India and East Antarctica, which culminated with the onset of seafloor spreading in the Valanginian. The geology of the Antarctic margin and the adjacent oceanic crust can be divided into distinct east and west sectors by an interpreted crustal boundary at approximately 58° E. Across this boundary, the continent–ocean boundary (COB), defined as the inboard edge of unequivocal oceanic crust, steps outboard from west to east by about 100 km. Structure in the sector west of 58° E is largely controlled by the mixed rift-transform setting. The edge of the onshore Archaean–Proterozoic Napier Complex is downfaulted oceanwards near the shelf edge by at least 6 km and these rocks are interpreted to underlie a rift basin beneath the continental slope. The thickness of rift and pre-rift rocks cannot be accurately determined with the available data, but they appear to be relatively thin. The margin is overlain by a blanket of post-rift sedimentary rocks that are up to 6 km thick beneath the lower continental slope. The COB in this sector is interpreted from the seismic reflection data and potential field modelling to coincide with the base of a basement depression at 8.0–8.5 s two-way time, approximately 170 km oceanwards of the shelf-edge bounding fault system. Oceanic crust in this sector is highly variable in character, from rugged with a relief of more than 1 km over distances of 10–20 km, to rugose with low-amplitude relief set on a long-wavelength undulating basement. The crustal velocity profile appears unusual, with velocities of 7.6–7.95 km s−1 being recorded at several stations at a depth that gives a thickness of crust of only 4 km. If these velocities are from mantle, then the thin crust may be due to the presence of fracture zones. Alternatively, the velocities may be coming from a lower crust that has been heavily altered by the intrusion of mantle rocks. The sector east of 58° E has formed in a normal rifted margin setting, with complexities in the east from the underlying structure of the N–S trending Palaeozoic Lambert Graben. The Napier Complex is downfaulted to depths of 8–10 km beneath the upper continental slope, and the margin rift basin is more than 300 km wide. As in the western sector, the rift-stage rocks are probably relatively thin. This part of the margin is blanketed by post-rift sediments that are up to about 8 km thick. The interpreted COB in the eastern sector is the most prominent boundary in deep water, and typically coincides with a prominent oceanwards step-up in the basement level of up to 1 km. As in the west, the interpretation of this boundary is supported by potential field modelling. The oceanic crust adjacent to the COB in this sector has a highly distinctive character, commonly with (1) a smooth upper surface underlain by short, seaward-dipping flows; (2) a transparent upper crustal layer; (3) a lower crust dominated by dipping high-amplitude reflections that probably reflect intruded or altered shears; (4) a strong reflection Moho, confirmed by seismic refraction modelling; and (5) prominent landward-dipping upper mantle reflections on several adjacent lines. A similar style of oceanic crust is also found in contemporaneous ocean basins that developed between Greater India and Australia–Antarctica west of Bruce Rise on the Antarctic margin, and along the Cuvier margin of northwest Australia.  相似文献   

2.
The 1994 Tasmante swath-mapping and reflection seismic cruise covered 200 000 km2 of sea floor south and west of Tasmania. The survey provided a wealth of morphological, structural and sedimentological information, in an area of critical importance in reconstructing the break-up of East Gondwana.The west Tasmanian margin consists of a non-depositional continental shelf less than 50 km wide and a sedimented continental slope about 100 km wide. The adjacent 20 km of abyssal plain to the west is heavily sedimented, and beyond that is lightly sedimented Eocene oceanic crust formed as Australia and Antarctica separated. The swath data revealed systems of 100 m-deep downslope canyons and large lower-slope fault-blocks, striking 320° and dipping landward. These continental blocks lie adjacent to the continent ocean boundary (COB) and are up to 2500 m high and have 15°–20° scarps.The South Tasman Rise (STR) is bounded to the west by the Tasman Fracture Zone extending south to Antarctica. Adjacent to the STR, the fracture zone is represented by a scarp up to 2000 m high with slopes of 15–20°. The scarp consists of continental faultblocks dipping landward. Beyond the scarp to the west is a string of sheared parallel highs, and beyond that is lightly sedimented Oligocene oceanic crust 4200–4600 m deep with distinct E-W spreading fabric. The eastern margin of the bathymetric STR trends about 320° and is structurally controlled. The depression between it and the continental East Tasman Plateau (ETP) is heavily sedimented; its western part is underlain by thinned continental crust and its central part by oceanic crust of Late Cretaceous to Early Tertiary age. The southern margin of the STR is formed by N-S transform faults and south-dipping normal faults.The STR is cut into two major terrains by a N-S fracture zone at 146°15E. The western terrain is characterised by rotated basement blocks and intervening basins mostly trending 270°–290°. The eastern terrain is characterised by basement blocks and intervening strike-slip basins trending 300°–340°. Recent dredging of basement rocks suggests that the western terrain has Antarctic affinities, whereas the eastern terrain has Tasmanian affinities.Stretching and slow spreading between Australia and Antarctica was in a NW direction from 130–45 Ma, and fast spreading was in a N-S direction thereafter. The western STR terrain was attached to Antarctica during the early movement, and moved down the west coast of Tasmania along a 320° shear zone, forming the landward-dipping continental blocks along the present COB. The eastern terrain either moved with the western terrain, or was welded to it along the 146°15 E fracture zone in the Early Tertiary. At 45 Ma, fast spreading started in a N-S direction, and after some probable movement along the 146°15E fracture zone, the west and east STR terrains were welded together and became part of Australia.  相似文献   

3.
On the Vøring volcanic passive margin offshore mid-Norway, NE Atlantic, a lower crustal body with P-wave velocities in the range of 7.1–7.7 km/s has been mapped by twenty two-dimensional Ocean Bottom Seismograph (OBS) profiles. The main aim of the present paper is to evaluate to what extent the lower crust is consistent with magmatic intrusions or serpentinized peridotite. The relatively low V p/V s ratios of 1.75–1.78 modelled for the lower crust under the continental part of the Vøring Plateau are consistent with mafic intrusions mixed with blocks of stretched continental crust, but not with the presence of partially serpentinized peridotites. The lower crustal high-velocity body is restricted to the area of the Late Cretaceous/Early Tertiary rift that lead to continental break-up in Early Eocene. The same model can explain the observations in the northern Vøring Basin, but in the central and southern Vøring Basin the seismic velocities do not preclude a model involving serpentinized peridotite in addition to intrusions and continental remnants. On the west Iberia non-volcanic margin a similar layer is interpreted as serpentinized peridotite. The existence of Moho reflections, the observation of S-wave anisotropy but absence of P-wave anisotropy, uncertainties regarding supply of water to allow for significant serpentinization and very low stretching factors compared with the west Iberia Margin, are among factors that argue against the presence of serpentinized peridotite in the Vøring Basin.  相似文献   

4.
Multichannel seismic reflection profiles from the continental rise west of the Antarctic Peninsula between 63° and 69°S show the growth of eight very large mound-shaped sedimentary bodies. MCS profiles and long-range side-scan sonar (GLORIA) images show the sea floor between mounds is traversed by channels originating in a dendritic pattern near the base of the continental slope. The mounds are interpreted as sediment drifts, constructed mainly from the fine-grained components of turbidity currents originating on the continental slope, entrained in a nepheloid layer within the ambient southwesterly bottom currents and redeposited downcurrent.  相似文献   

5.
Rifting of the Qiongdongnan Basin was initiated in the Cenozoic above a pre-Cenozoic basement, which was overprinted by extensional tectonics and soon after the basin became part of the rifted passive continental margin of the South China Sea. We have integrated available grids of sedimentary horizons, wells, seismic reflection data, and the observed gravity field into the first crust-scale structural model of the Qiongdongnan Basin. Many characteristics of this model reflect the tectonostratigraphic history of the basin. The structure and isopach maps of the basin allow us to reconstruct the history of the basin comprising: (a) The sediments of central depression are about 10 km thicker than on the northern and southern sides; (b) The sediments in the western part of the basin are about 6 km thicker than that in the eastern part; (c) a dominant structural trend of gradually shifting depocentres from the Paleogene sequence (45–23.3 Ma) to the Neogene to Quaternary sequence (23.3 Ma–present) towards the west or southwest. The present-day configuration of the basin reveals that the Cenozoic sediments are thinner towards the east. By integrating several reflection seismic profiles, interval velocity and performing gravity modeling, we model the sub-sedimentary basement of the Qiongdongnan Basin. There are about 2–4 km thick high-velocity bodies horizontal extended for a about 40–70 km in the lower crust (v > 7.0 km/s) and most probably these are underplated to the lower stretched continental crust during the final rifting and early spreading phase. The crystalline continental crust spans from the weakly stretched domains (about 25 km thick) near the continental shelf to the extremely thinned domains (<2.8 km) in the central depression, representing the continental margin rifting process in the Qiongdongnan Basin. Our crust-scale structural model shows that the thinnest crystalline crust (<3 km) is found in the Changchang Sag located in the east of the basin, and the relatively thinner crystalline crust (<3.5 km) is in the Ledong Lingshui Sag in the west of the basin. The distribution of crustal extension factor β show that β in central depression is higher (>7.0), while that on northern and southern sides is lower (<3.0). This model can illuminate future numerical simulations, including the reconstruction of the evolutionary processes from the rifted basin to the passive margin and the evolution of the thermal field of the basin.  相似文献   

6.
The continental margin off the Lofoten-Vesterålen islands between 67° and 70°N becomes progressively narrower northwards. The continental shelf west of the islands and in the Vestfjord is underlain by a relatively thin sedimentary sequence which has been subjected to block faulting, forming local basins and highs. The structural deformation had ceased in the mid-Creataceous. The Tertiary sediments are generally missing, but reappear in the Træn Basin south of about 67.5°N. The continental margin seaward of the shelf edge changes structural style from south to north. In the north, the marginal subsidence is characterized by major faults, whereas minor faults and flexuring dominate south of 69°N. A smooth acoustic basement reflector, which in places is underlain by dipping sub-basement interfaces, is typical for the area between anomaly 23 and the Vøring Plateau Escarpment. In the northern area, the acoustic basement extends almost to the shelf edge. These observations relate to the early Tertiary history of rifting and passive margin formation within a preexisting epicontinental sea between Norway and Greenland. The abrupt change from continental to oceanic basement is defined by the extension of the Vøring Plateau Escarpment south of 69.1°N and by the change in magnetic character off Vesterålen.  相似文献   

7.
The Pelotas Basin is the classical example of a volcanic passive margin displaying large wedges of seaward-dipping reflectors (SDR). The SDR fill entirely its rifts throughout the basin, characterizing the abundant syn-rift magmatism (133–113 Ma). The Paraná–Etendeka Large Igneous Province (LIP), adjacent to west, constituted the pre-rift magmatism (134–132 Ma). The interpretation of ultra-deep seismic lines showed a very different geology from the adjacent Santos, Campos and Espírito Santo Basins, which constitute examples of magma-poor passive margins. Besides displaying rifts totally filled by volcanic rocks, diverse continental crustal domains were defined in the Pelotas Basin, such as an outer domain, probably constituted by highly stretched and permeated continental igneous crust, and a highly reflective lower crust probably reflecting underplating.The analysis of rifting in this portion of the South Atlantic is based on seismic interpretation and on the distribution of regional linear magnetic anomalies. The lateral accretion of SDR to the east towards the future site of the breakup and the temporal relationship between their rift and sag geometries allows the reconstitution of the evolution of rifting in the basin. Breakup propagated from south to north in three stages (130–127.5; 127.5–125; 125–113 Ma) physically separated by oceanic fracture zones (FZ). The width of the stretched, thinned and heavily intruded continental crust also showed a three-stage increase in the same direction and at the same FZ. Consequently, the Continental-Oceanic Boundary (COB) shows three marked shifts, from west to east, from south to north, resulting into rift to margin segmentation. Rifting also propagated from west to east, in the direction of the final breakup, in each of the three segments defined. The importance of the Paraná–Etendeka LIP upon the overall history of rupturing and breakup of Western Gondwanaland seems to have been restricted in time and in space only to the Pelotas Basin.  相似文献   

8.
Gravity studies over the continental margin of the central west coast of India show a sediment thickness of 2–3 km on the shelf associated with deeper horst and graben structures, of 6 km in the shelf margin basin, and about 1 km in the deep sea. The upward trend in free-air gravity anomaly toward the deep sea region is interpreted as crustal thinning. Model studies indicate a 25-km-thick crust in the shelf region and a minimum of 18 km in the more offshore region. An abrupt magnetic signature change suggests differential basement depths in the shelf region. Major faulting in the region is confirmed in water depths of approximately 100–200 m.  相似文献   

9.
The morphology of the Gulf of Oman Basin, a 3,400 m deep oceanic basin between Oman and southern Pakistan and southern Iran, ranges from a convergent margin (Makran margin) along the north side, a passive type (Oman margin) along the south side, translation types along the basin's west (Zendan Fault-Oman Line) and east (Murray Ridge) sides and a narrow continental rise and a wide abyssal plain in the centre of the basin. Sediment input into the basin during the Late Quaternary has been mainly from the north as a result of the uplift of the Coast Makran Mountains in the Late Miocene-Pliocene. Today most of this detritrus is deposited on the shelf and upper continental slope and perched basins behind the fold/fault ridges on the lower slope. The presence of fans and channels on the continental rise on the north side of the basin indicate, however, that continental derived debris was, and possibly is, being transported to the deep-sea by turbidity currents via gaps in the ridges on the lower slope. In addition to land derived terrigenous sediments, the basin deposits also contain biogenic (organic matter and calcium carbonate), eolian detritus and hydrates and authigenic carbonates from the tectonic dewatering of the Makran accretionary wedge. The eolian sediment is carried into the Gulf of Oman Basin from Arabia and the Mesopotamia Valley by the northwesterly Shamal winds. This type of detritus was particularly abundant during the glacial arid periods 21,000–20,000 and 11,000 (Younger Dryas) years ago when exposure of the Persian (Arabian) Gulf increased the area of dust entrainment and shifted the position of the source of the eolian sediments closer to the basin.  相似文献   

10.
利用中国第九次南大洋考察中南极普里兹湾及其邻近海域的CTD资料,分析研究了调查海域的水文结构特征及其该区南极底层水(AABW)的来源.研究结果表明,在研究海域,深水洋区近表层流由西向东流,而在普里兹湾内存在一个气旋型涡.水文结构中最明显的海洋学特征是:(1)绕极深层水(CDW)的涌升现象明显,涌升最强的位置是麦克罗伯逊地以北海域,最明显的深度是50～200m层,暖水涌升将冬季冷水分隔成南北两部分,并在其中形成孤立的暖水块;(2)陆缘水边界明显,这是绕极深层水与南极冷水之间形成的锋面,一般处在次表层水中,大致位于64°～66°S之间;(3)存在着双跃层结构.观测期间,普里兹湾以北探水海域存在着南极底层水,其来源可能有二:一为当地形成,二为源于威德尔海和罗斯海.  相似文献   

11.
This paper describes results from a geophysical study in the Vestbakken Volcanic Province, located on the central parts of the western Barents Sea continental margin, and adjacent oceanic crust in the Norwegian-Greenland Sea. The results are derived mainly from interpretation and modeling of multichannel seismic, ocean bottom seismometer and land station data along a regional seismic profile. The resulting model shows oceanic crust in the western parts of the profile. This crust is buried by a thick Cenozoic sedimentary package. Low velocities in the bottom of this package indicate overpressure. The igneous oceanic crust shows an average thickness of 7.2 km with the thinnest crust (5–6 km) in the southwest and the thickest crust (8–9 km) close to the continent-ocean boundary (COB). The thick oceanic crust is probably related to high mantle temperatures formed by brittle weakening and shear heating along a shear system prior to continental breakup. The COB is interpreted in the central parts of the profile where the velocity structure and Bouguer anomalies change significantly. East of the COB Moho depths increase while the vertical velocity gradient decreases. Below the assumed center for Early Eocene volcanic activity the model shows increased velocities in the crust. These increased crustal velocities are interpreted to represent Early Eocene mafic feeder dykes. East of the zone of volcanoes velocities in the crust decrease and sedimentary velocities are observed at depths of more than 10 km. The amount of crustal intrusions is much lower in this area than farther west. East of the Kn?legga Fault crystalline basement velocities are brought close to the seabed. This fault marks the eastern limit of thick Cenozoic and Mesozoic packages on central parts of the western Barents Sea continental margin.  相似文献   

12.
Complementary to previous work mainly based on seismic interpretation, our compilation of geophysical data (multibeam bathymetry, gravity, magnetic and seismic) acquired within the framework of the ZoNéCo (ongoing since 1993) and FAUST (1998–2001) programs enables us to improve the knowledge of the New Caledonia Basin, Fairway Basin and Fairway Ridge, located within the Southwest Pacific region. The structural synthesis map obtained from geophysical data interpretation allows definition of the deep structure, nature and formation of the Fairway and New Caledonia Basins. Development of the Fairway Basin took place during the Late Cretaceous (95–65 Ma) by continental stretching. This perched basin forms the western margin of the New Caledonia Basin. A newly identified major SW–NE boundary fault zone separates northern NW–SE trending segments of the two basins from southern N–S trending segments. This crustal-scale fault lineament, that we interpret to be related to Cretaceous-early Cainozoic Tasman Sea spreading, separates the NW–SE thinned-continental and N–S oceanic segments of the New Caledonia Basin. We can thus propose the following pattern for the formation of the study area. The end of continental stretching within the Fairway and West Caledonia Basins ( 65–62 Ma) is interpreted as contemporaneous with the onset of emplacement of oceanic crust within the New Caledonia Basin’s central segment. Spreading occurred during the Paleocene (62–56 Ma), and isolated the Gondwanaland block to the west from the Norfolk block to the east. Finally, our geophysical synthesis enables us to extend the structural Fairway Basin down to the structural Taranaki Basin, with the structural New Caledonia Basin lying east of the Fairway Basin and ending further north than previously thought, within the Reinga Basin northwest of New Zealand.  相似文献   

13.
  相似文献   

14.
Interpretation of reflection profiles across the Washington continental margin suggests deformation of Cascadia basin strata against the continental slope. Individual reflecting horizons can be traced across the slope-basin boundary. The sense of offset along faults on the continental slope is predominantly, but not entirely, west side up. Two faults of small displacement are seen to be west-dipping reverse faults. Magnetic anomalies on the Juan de Fuca plate can be traced 40–100 km eastward under the slope, and structural interpretation combined with calculated rates of subduction suggests that approximately 50 km of the outer continental slope may have been formed in Pleistocene time. Rocks of Pleistocene age dredge from a ridge exposing acoustic “basement” on the slope, plus the results of deep-sea drilling off northern Oregon, are consistent with this interpretation. The question of whether or not subduction is occurring at present is unresolved because significant strain has not affected the upper 200 m of section in the Cascadia basin. However, deformation of the outer part of the slope has been episodic and may reflect episodic yield, deposition rate, subduction rate, or some combination of these factors.  相似文献   

15.
Marine seismic reflection profiles from offshore SW Taiwan combined with onland geological data are used to investigate the distribution and nature of the deformation front west of Taiwan. Locations of the frontal structure west of Taiwan are generally connected in a linear fashion, although the alignment of frontal structures is offset by strike-slip faults. The deformation front begins from the northern Manila Trench near 21°N and continues northward along the course of the Penghu Submarine Canyon in a nearly N–S direction north of 21°N until it reaches the upper reaches of Penghu Canyon at about 22°15′N. The deformation front then changes direction sharply to the northeast. It connects to the Chungchou thrust fault or the Tainan anticline in the coastal plain and continues northwards along the outer Western Foothills to the northern coast of Taiwan near 25°N. Characteristics of structural style, strain regime, sedimentation and tectonics vary along the trend of the deformation front. Ramp anticlines, diapiric intrusion and incipient thrust faults are commonly associated with the deformation front. Variations in structural style along strike can be related to different stages of oblique collision in Taiwan. The deformation front (collision front) west of Taiwan can be considered as a boundary between contraction in the Taiwan orogen and extension west of the collision zone. The deformation front east of the Tainan Basin and its northward extension along the outer limit of the Western Foothills is the surface trace separating the foreland thrust belt from the nearby foredeep, not a boundary between the Chinese and Taiwan margins. The submarine deformation front off SW Taiwan is the surface trace separating the submerged Taiwan orogenic wedge from the Chinese passive continental margin, not a surface trace of the plate boundary between the Eurasian and Philippine Sea plates.  相似文献   

16.
The Mozambique Ridge (MOZR) is one of the basement high structures located in the Southwest Indian Ocean, parallel to the Southeast African continental margin. It was formed as a result of the tectono-magmatic evolution of the Gondwana breakup. The origin of the MOZR has been highly debated, with models suggesting either continental or oceanic origin. With new free-air gravity anomaly and multichannel seismic (MCS) reflection data, we present results of 2D density modeling along two seismic profiles acquired by R/V Xiangyanghong 10 at the northern Mozambique Ridge (N-MOZR) between 26°S and 28°S. We observed high free-air gravity anomaly and strong positive magnetic anomaly related to the emplaced seaward dipping reflectors (SDR) and high density lower crustal body (HDLCB), and high Bouguer gravity anomaly associated with the thinning of the continental crust underneath the N-MOZR over a distance of ~82 km. This suggests a thinned and intruded continental crust bound by the Mozambique Fracture Zone (MFZ) that is characterized by gravity low and negative magnetic anomaly. This fracture zone marks the continent-ocean boundary (COB) while the N-MOZR is the transform margin high, i.e., marks the continent-ocean transition (COT) of the Southern Mozambique margin, following the definition of transform margins. We suggest that the N-MOZR was formed by continental extension and subsequent breakup of the MFZ, accompanied by massive volcanism during the southward movement of the Antarctica block. The presence of SDR, HDLCB, and relatively thick oceanic crust indicates the volcanic nature of this transform margin.  相似文献   

17.
New geophysical information including multichannel seismic profiling data obtained by the PGO Sevmorgeologia Ministry of Geology of the former USSR, Murmansk during 1984–1988 is discussed and interpreted in this study. The deep structure, sedimentary cover and stratigraphy of the Spitsbergen Continental Margin, considered to be a passive margin, i.e. divergent in the northern part and strike-slip in the western part, is described.Two genetically different types of plateaus on the continental margin, Yermak in the north and Spitsbergen (Vestnesa) in the west, have been identified.The entire extent of the continental slope of the northern part of the Spitsbergen Continental Margin in the Eurasia Basin is underlain by attenuated continental crust, while at the base of the Southwest Continental Margin, the oceanic crust along almost the entire extent is observed. The sedimentary cover, up to 10 km thick within the West Spitsbergen Continental Margin, is likewise observed. Within the North Spitsbergen Margin, however, it does not exceed 3.5 km in thickness.The extension and deposition within the West Spitsbergen Margin began in early Oligocene, while the rifting with accompanying sedimentation within the North Spitsbergen Continental Margin started probably in Early Cretaceous.  相似文献   

18.
Compilation of currently-available gravity data permits the construction of a free-air anomaly contour map of the continental margin west of Ireland (51–54 N). Major elements in the structure of the margin, previously delineated on the basis of seismic reflection and magnetic surveys, are clearly seen on the FAA contour map, notably the Porcupine Seabight Trough, and Porcupine Ridge. However, contrary to earlier ideas, the gravity data imply that the Seabight Trough extends northwards onto the Slyne Ridge; and the Slyne Trough, formerly regarded as northeasterly prolongation of the Seabight Trough, appears to be a discrete, fault-bounded, feature separated from the latter by a basement ridge. East-west gravity profiles are modelled in terms of thinned crust with the Moho at a minimum depth of 15 km beneath the axis of the Seabight Trough. The models tend to support hypotheses invoking formation of the Seabight Trough by simple westward translation of Porcupine Ridge with respect to the Irish Mainland.  相似文献   

19.
Massive, transient late syn-rift-to-breakup volcanism during separation between the Seychelles microcontinent and India formed the Deccan continental flood basalts and their equivalents on the Seychelles-Mascarene Plateau and on the conjugate continental margins, i.e. the Deccan Large Igneous Province. We estimate an original extrusive area of at least 1.8×106 km2, and a volume >1.8×106 km3, and suggest a plate tectonic model comprising: (1) development of the Seychelles microplate by fan-shaped spreading in the Mascarene Basin, and continental extension followed by fan-shaped spreading between India and the Seychelles during A29-27 time. (2) Cessation of fan-shaped spreading just after A27 time, followed by spreading along the India-Seychelles plate boundary. (3) Margin subsidence, modified south of Goa by the persistent, time-transgressive effects along the plume trail. The margin is divided into three regional provinces by the prolongation of regional transforms which formed the east and west boundaries of the Seychelles microplate during breakup and early sea floor spreading. In some aspects, the conjugate margins are different from other volcanic margins; e.g. regional wedges of seaward dipping reflectors along the continent-ocean transition have not yet been reported. We ascribe this to the eruption of the most voluminous lavas during chron 29r, i.e on continental lithosphere in a late syn-rift setting. The enigmatic Laxmi Ridge is a complex marginal high comprised of both continental and oceanic crust. It was probably created during breakup, but may have experienced later magmatic and/or tectonic deformation.  相似文献   

20.
The stable continental margin of northeastern Brazil is unusually narrow, probably because of the small size and tropical character of the drainage basins of the hinterland, and correspondingly low rates of land erosion and marine sedimentation. The continental shelf, which is mainly a marine erosion surface, is also remarkably shallow, either because of upwarping or, more probably, because of the ineffectiveness of Pleistocene marine erosional processes on steeply sloping continental margins. Sediment accumulation is confined to the Sāo Francisco delta, seaward of which are fossil (?) lagoonal deposits, and to a poorly developed nearshore sand prism.The margin formed by seaward progradation of sediment on a subsiding basement, but the present morphology of the continental slope reflects chiefly Pleistocene canyon cutting and mass gravitational movements of sediment, which have exposed older strata in the upper slope. Beneath the continental slope is a magnetic anomaly (like the slope anomaly off the eastern U.S.A.), probably caused by a deeply buried dike of oceanic basalt, and apparently associated with a buried ridge which may have formed the seaward margin of the Sergipe—Alagoas Basin during the early history of the South Atlantic. Similar structures may be typical of the narrow easternmost part of the Brazilian margin.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号