共查询到20条相似文献，搜索用时 15 毫秒
1.
Impact of GPS differential code bias in dual- and triple-frequency positioning and satellite clock estimation 总被引：1，自引：0，他引：1
The features and differences of various GPS differential code bias (DCB)s are discussed. The application of these biases in dual- and triple-frequency satellite clock estimation is introduced based on this discussion. A method for estimating the satellite clock error from triple-frequency uncombined observations is presented to meet the need of the triple-frequency uncombined precise point positioning (PPP). In order to evaluate the estimated satellite clock error, the performance of these biases in dual- and triple-frequency positioning is studied. Analysis of the inter-frequency clock bias (IFCB), which is a result of constant and time-varying frequency-dependent hardware delays, in ionospheric-free code-based (P1/P5) single point positioning indicates that its influence on the up direction is more pronounced than on the north and east directions. When the IFCB is corrected, the mean improvements are about 29, 35 and 52% for north, east and up directions, respectively. Considering the contribution of code observations to PPP convergence time, the performance of DCB(P1–P2), DCB(P1–P5) and IFCB in GPS triple-frequency PPP convergence is investigated. The results indicate that the DCB correction can accelerate PPP convergence by means of improving the accuracy of the code observation. The performance of these biases in positioning further verifies the correctness of the estimated dual- and triple-frequency satellite clock error. 相似文献
2.
3.
实时GNSS精密单点定位(PPP)技术必须使用实时的高精度卫星精密轨道和钟差。本文研究了精密卫星钟差融合解算模型及策略,并利用滤波算法实现了北斗/GPS实时精密卫星钟差融合估计算法。仿真实时试验结果显示:获得的北斗/GPS实时钟差与GFZ事后多GNSS精密钟差(GBM)的标准差在0.15 ns左右;使用该钟差进行GPS动态PPP试验,收敛后水平精度优于5 cm,高程精度优于10 cm;使用仿真实时钟差进行的北斗动态PPP与使用GFZ事后多GNSS精密钟差开展的试验相比精度相当,可实现分米级定位。 相似文献
4.
基于GPS非差观测值进行精密单点定位研究 总被引：26，自引：6，他引：26
介绍了精密单点定位所用的数学模型及解算方案，着重分析了基于GPS非差双频观测值进行精密单点定位的误差模型、数据质量控制方法、卫星钟差的估算和内插、数据和解的一致性及精密单点定位能达到的精度等问题，并和双差结果作了比较。结果表明，利用精密星历及卫星钟改正参数的精密单点定位可达到cm级精度。 相似文献
5.
北斗三号卫星导航系统（BeiDou-3 navigation satellite system,BDS-3）全球组网工作全面建成,标志着BDS-3迈入全球定位、导航和授时服务的新时代。为了全面比较BDS-3系统与其余全球导航卫星系统（global navigation satellite system,GNSS）非组合精密单点定位（precise point positioning,PPP）性能,重点分析不同分析中心BDS-3精密轨道和钟差产品的一致性、BDS-3/GNSS卫星可用性、BDS-3/GNSS单系统及多系统融合PPP定位性能。结果表明,基于5个分析中心的精密轨道和钟差产品,BDS-3静态PPP三维均方根误差约为2.31~4.00 cm,其单系统收敛时间明显慢于其余GNSS系统,GPS系统的加入对BDS-3/GNSS双系统融合PPP改善效果最为明显,且四系统融合能够有效地缩短收敛时间,并提高动态PPP定位精度。随着BDS-3系统的发展以及轨道和钟差产品的进一步完善,BDS-3同样具备其余GNSS系统提供优质导航定位服务的潜力。 相似文献
6.
高性能原子钟钟差建模及其在精密单点定位中的应用 总被引：2，自引：2，他引：0
鉴于当前许多IGS跟踪站均配置有高性能原子钟的现状,本文首先采用修正Allan方差法分析了不同IGS跟踪站的接收机钟随机噪声的时域特性,进而评估了不同类型接收机的短期稳定度及钟差建模的可行性,然后利用IGS站配有氢原子钟的观测数据,在精密单点定位算法中,通过对钟差参数进行短时建模约束接收机钟差的随机变化,进而改进精密单点定位(PPP)的定位性能。试验结果表明钟差建模方法显著降低了高程分量参数、天顶对流层延迟参数与接收机钟差参数之间的相关性,GNSS高程分量的精度可提高50%。该方法对于提升PPP技术在地壳形变监测、低轨卫星定轨、水汽监测及预报等高精度GNSS地学领域的应用水平具有一定意义。 相似文献
7.
在进行GPS/GLONASS联合卫星钟差估计时,GLONASS码频间偏差（inter-frequency bias,IFB）因卫星频率间的差异而无法被测站接收机钟差参数吸收,其一部分将进入GLONASS卫星钟差估值中。通过引入多个"时频偏差"参数（inter-system and inter-frequency bias,ISFB）及附加基准约束对测站GLONASS码IFB进行函数模型补偿,实现其与待估卫星钟差参数的有效分离,并对所估计实时卫星钟差和实时精度单点定位（real-time precise point positioning,RT-PPP）进行精度评估。结果表明,在卫星钟差估计观测方程中忽略码IFB,会明显降低GLONASS卫星钟差估值精度;新方法能有效避免码IFB对卫星钟差估值的影响,所获得GPS、GLONASS卫星钟差与ESA（European Space Agency）事后精密钟差产品偏差平均均方根值分别小于0.2 ns、0.3 ns。利用实时估计卫星钟差进行静态RT-PPP,当观测时段长为2 h时,GPS单系统、GPS/GLONASS组合系统的3D定位精度优于10 cm,GLONASS单系统3D定位精度约为15 cm;三种模式24 h单天解的3D定位精度均优于5 cm。 相似文献
8.
本文基于非差精密单点定位(PPP)和双差定位模式,采用研制的UNIP软件和GAMIT/TRACK运动学分析模块,对GPS技术在地震监测中的应用进行研究。利用IGS不同精度和时延的星历和钟差产品,分析了卫星轨道和钟差对两种软件动态定位结果的影响;采用不同的数据处理方案,分别提取GPS同震地表形变信息。结果表明:GAMIT/TRACK模块精密动态定位的实时性,更适用于地震等突发事件中的GPS快速响应;如果能够提供精确的卫星钟差,UNIP软件的高程精度明显优于GAMIT/TRACK模块,技术将更显优势。 相似文献
9.
A combination of GPS and GLONASS observations can offer improved reliability, availability and accuracy for precise point positioning (PPP). We present and analyze a combined GPS/GLONASS PPP model, including both functional and stochastic components. Numerical comparison and analysis are conducted with respect to PPP based on only GPS or GLONASS observations to demonstrate the benefits of the combined GPS/GLONASS PPP. The observation residuals are analyzed for more appropriate stochastic modeling for observations from different navigation systems. An analysis is also made using different precise orbit and clock products. The performance of the combined GPS/GLONASS PPP is assessed using both static and kinematic data. The results indicate that the convergence time can be significantly reduced with the addition of GLONASS data. The positioning accuracy, however, is not significantly improved by adding GLONASS data if there is a sufficient number of GPS satellites with good geometry. 相似文献
10.
精密卫星钟差加密方法及其对星载GPS低轨卫星定轨精度影响 总被引：7，自引：0，他引：7
韩保民 《武汉大学学报(信息科学版)》2006,31(12):1075-1078
系统分析、比较了几种精密卫星钟差加密方法，研究了利用全球分布的IGS永久跟踪站的GPS观测数据估计高采样率卫星钟差参数的原理与方法，并将各种卫星钟差加密方法得到的结果与IGS数据分析中心估计的卫星钟差结果相比较。最后将不同加密方法得出的精密卫星钟差结果用于基于星载GPS双频非差观测值的CHAMP低轨卫星的定轨，并将不同方法得到的定轨精度进行比较。结果表明，利用地面跟踪站的GPS观测数据，可高精度、高密度地估计GPS卫星钟差，估计精度可达0．1～0．5ns。经地面GPS跟踪站数据估计的GPS卫星钟差，应用于基于PPP方法的低轨卫星定轨，其定轨精度在10cm以内。 相似文献
11.
在传统多系统非差非组合精密单点定位（precise point positioning，PPP）模型中，电离层延迟会吸收部分接收机码硬件延迟，其估计值可能为负数。提出了一种估计接收机差分码偏差（differential code bias，DCB）参数的GPS（Global Positioning System）/BDS（BeiDou Navigation Satellite System）非组合PPP模型，将每个系统第1个频率上的接收机码硬件延迟约束为零，对接收机DCB进行参数估计，达到了分离电离层延迟和接收机码硬件延迟的目的，降低了接收机钟差和电离层延迟的相关程度。利用4个多星座实验（multi-GNSS experiment，MGEX）跟踪站的GPS/BDS数据进行了静态和动态PPP试验，结果表明，与不估计DCB参数的PPP模型相比，采用估计DCB参数PPP模型后，静态模式下定位精度和收敛速度平均提高了29.3%和29.8%，动态模式下定位精度和收敛速度平均提高了15.7%和21.6%。 相似文献
12.
针对传统事后精密单点定位技术的时间延迟问题,该文基于IGS RTS实时数据流产品,开展了实时精密单点定位技术在远海实时GPS验潮中的应用研究.对RTS改正的实时精密卫星轨道和钟差进行了精度验证和分析,给出了RT-PPP的数据处理策略以及实时GPS验潮的基本流程;组织和实施了渤海湾船载GPS验潮试验,以压力式验潮仪数据为参考,对远距离实时GPS潮汐测量结果进行了精度分析.结果表明:①以IGS最终卫星轨道和钟差产品为参考,RTS实时精密卫星轨道在X、y、Z方向的精度(RMS)均优于3 cm,卫星钟差的精度优于0.15 ns;②采用傅里叶低通滤波方法,消除波浪对潮汐观测的影响,进一步提取潮位信息.在忽略船体姿态改正的情况下,实时精密单点定位验潮相对于压力式验潮仪结果的最大偏差优于20 cm,RMS达到7.5 cm. 相似文献
13.
The quality of real-time GPS positions based on the method of precise point positioning (PPP) heavily depends on the availability and accuracy of GPS satellite orbits and satellite clock corrections. Satellite-based augmentation systems (SBAS) provide such corrections but they are actually intended to be used for wide area differential GPS with positioning results on the 1-m accuracy level. Nevertheless, carrier phase-based PPP is able to achieve much more accurate results with the same correction values. We applied SBAS corrections for dual-frequency PPP and compared the results with PPP obtained using other real-time correction data streams, for example, the GPS broadcast message and precise corrections from the French Centre National d’Etudes Spatiales and the German Deutsches Zentrum für Luft- und Raumfahrt. Among the three existing SBAS, the best results were achieved for the North American wide area augmentation system (WAAS): horizontal and vertical position accuracies were considerably smaller than 10 cm for static 24-h observation data sets and smaller than 30 cm for epoch-by-epoch solutions with 2 h of continuous observations. The European geostationary navigation overlay service and the Japanese multi-functional satellite augmentation system yield positioning results with biases of several tens of centimeters and variations larger by factors of 2–4 as compared to WAAS. 相似文献
14.
准天顶卫星系统目前利用QZS-2~QZS-43颗卫星播发L6E信号,为东亚和大洋洲地区用户提供实时的增强服务。该文分析了L6E信号结构及轨道和钟差的计算模型,研究了目前L6E信号的覆盖范围和可用性,评估了L6E改正数恢复的卫星轨道和钟差及其用于动态PPP的精度水平。结果表明:我国用户在使用15°截止高度角时L6E信号仍有100%的可用性;L6E改正数恢复的GPS和GLONASS卫星轨道的3D RMS平均值分别为5.3和13.9 cm,卫星钟差的STD平均值分别为0.14和0.22 ns,利用GPS卫星的轨道和钟差进行的动态PPP可以获得水平优于10 cm、高程优于15 cm的精度,在加入GLONASS卫星后,东方向和高程方向定位误差和收敛时间均有明显改善。 相似文献
15.
BDS/GPS精密单点定位收敛时间与定位精度的比较 总被引：5，自引：1，他引：4
采用武汉大学卫星导航定位技术研究中心发布的北斗精密卫星轨道和钟差,在TriP 2.0软件的基础上实现了BDS PPP定位算法,并利用大量实测数据进行了BDS/GPS静态PPP和动态PPP浮点解试验。结果表明,BDS静态PPP的收敛时间约为80min,动态PPP的收敛时间为100min;对于3h的观测数据,静态PPP收敛后定位精度优于5cm,动态PPP收敛后水平方向优于8cm,高程方向约12cm;与GPS PPP类似,东分量上定位精度较北分量稍差。当前由于BDS的全球跟踪站有限,精密轨道和钟差精度不如GPS,因此BDS PPP的收敛时间较GPS长,但收敛后可实现厘米至分米级的绝对定位。 相似文献
16.
Both static and kinematic testings are investigated by using IGS 5min, 30s and 5s-interval precise satellite clock products
in precise point positioning (PPP) solution. Test results show that the sampling rate of IGS satellite clock has very little
effect on the static PPP solution. All the three types of sampling intervals of precise satellite clock can satisfy mm-cm
level of positioning accuracy; higher sampling rate has no significant improvement for PPP solution. However, sampling rate
of satellite clock has a significant impact on the PPP solution in kinematic PPP. The higher the interval of satellite clock,
the better the accuracy achieved. The accuracy of kinematic PPP achieved by using 30s-interval precise satellite clock is
improved by nearly 30–50 percent with respect to the solution by using 5min-interval precise satellite clock, but using 5s
and 30s-interval satellite clock can almost produce the same accuracy of kinematic solution. Moreover, the use of precise
satellite clock products from different analysis centers may also produce more or less effect on the PPP solution. 相似文献
17.
18.
利用码和载波相位观测值半和线性组合可以消除电离层一阶误差的特性,讨论了基于UofC消电离层组合的GPS/GLONASS精密单点定位的数学模型。UofC模型对两个频率上的模糊度参数分别进行估计,为进一步获得模糊度参数的整数解提供了便利。利用IGS跟踪站的GPS/GLONASS观测数据对UofC模型和传统的在两个频率码观测值间进行消电离层组合的模型进行了比较,统计结果表明,UofC模型与传统模型相比在平面位置定位精度上略有提高,但总体上差别不大。 相似文献
19.
Both static and kinematic testings are investigated by using IGS 5min, 30s and 5s-interval precise satellite clock products in precise point positioning (PPP) solution. Test results show that the sampling rate of IGS satellite clock has very little effect on the static PPP solution. All the three types of sampling intervals of precise satellite clock can satisfy mm-cm level of positioning accuracy; higher sampling rate has no significant improvement for PPP solution. However, sampling rate of satellite clock has a significant impact on the PPP solution in kinematic PPP. The higher the interval of satellite clock, the better the accuracy achieved. The accuracy of kinematic PPP achieved by using 30s-interval precise satellite clock is improved by nearly 30–50 percent with respect to the solution by using 5min-interval precise satellite clock, but using 5s and 30s-interval satellite clock can almost produce the same accuracy of kinematic solution. Moreover, the use of precise satellite clock products from different analysis centers may also produce more or less effect on the PPP solution. 相似文献
20.
广域实时精密定位与时间服务已成为GNSS应用领域研究热点,目前国内外学者围绕其模型算法已展开大量的研究。本文重点论述广域实时精密定位与时间服务数据的处理方法和服务系统,给出了基于不同基准约束的卫星钟差解算数学模型,提出通过引入外接原子钟测站、标准时间源(UTC/BDT)等不同时间基准,构建卫星拟稳基准、外接原子钟跟踪站拟稳基准及标准时间源等约束下的钟差解算模型,分析了时间基准对精密单点定位和精密单点授时的影响。本文采用实时卫星轨道、钟差、相位偏差、电离层延迟等服务产品及跟踪站实时数据,验证了系统产品可靠性及终端定位与时间服务性能。实测结果表明:GPS轨道径向精度1.8 cm,钟差STD精度约0.05 ns;BDS-3轨道径向精度6.7 cm,钟差STD精度优于0.1 ns;GPS和BDS-2电离层改正精度分别为0.74 TECU与1.03 TECU。基于该产品实现了用户端PPP、PPP-RTK及PPT、PPT-RTK服务,满足了用户实时厘米级定位和优于0.5 ns的单站时间传递服务,当采用GPS+BDS-2 PPP-RTK解算时,平面收敛至5 cm约需要12 min。 相似文献