共查询到20条相似文献，搜索用时 31 毫秒
1.
A numerical model is developed to simulate fully nonlinear extreme waves in finite and infinite water-depth wave tanks. A semi-mixed Eulerian-Lagrangian formulation is adopted and a higher-order boundary element method in conjunction with an image Green function is used for the fluid domain. The boundary values on the free surface are updated at each time step by a fourth-order Runga-Kutta time-marching scheme at each time step. Input wave characteristics are specified at the upstream boundary by an appropr... 相似文献
2.
A fully nonlinear numerical model based on a time-domain higher-order boundary element method (HOBEM) is founded to simulate the kinematics of extreme waves. In the model, the fully nonlinear free surface boundary conditions are satisfied and a semi-mixed Euler-Lagrange method is used to track free surface; a fourth-order Runga-Kutta technique is adopted to refresh the wave elevation and velocity potential on the free surface at each time step; an image Green function is used in the numerical wave tank so that the integrations on the lateral surfaces and bottom are excluded. The extreme waves are generated by the method of wave focusing. The physical experiments are carried out in a wave flume. On the horizontal velocity of the measured point, numerical solutions agree well with experimental results. The characteristics of the nonlinear extreme-wave kinematics and the velocity distribution are studied here. 相似文献
3.
利用时域高阶边界元方法建立了模拟极限波浪运动的完全非线性数值模型,其中自由水面满足完全非线性自由水面条件.采用半混合欧拉-拉格朗日方法追踪流体瞬时水面,运用四阶Runge-Kutta方法更新下一时间步的波面和速度势,同时应用镜像格林函数消除水槽两个侧面和底面上的积分.研究中利用波浪聚焦的方法产生极限波浪,并且在水槽中开展了物理模型实验,将测点试验数据与数值结果进行了对比,两者吻合得很好.对极限波浪运动的非线性和流域内速度分布进行了研究. 相似文献
4.
无限水深聚焦波完全非线性数值模拟 总被引：1，自引：1，他引：0
基于势流理论提出一种新的高阶边界元方法对无限水深的聚焦波浪进行完全非线性数值模拟.自由水面满足完全非线性边界条件,模拟波浪的非线性效果可以达到更高阶.利用镜像原理,建立一种全新的格林函数应用到无限水深的数值波浪水槽中,以致于两无限深水槽侧壁的积分可以被排除.为了产生相应的入射波和吸收出流波浪,一个由点源组成的造波装置被布置于计算域内,同时人工阻尼层被用来吸引出流波浪,由波浪聚焦的方法得到极限波浪.通过开展线性和完全非线性聚焦波浪的数值实验及与理论解对比,验证本数值模型可以用来模拟无限深水域的极限波浪,且在出流边界没有反射. 相似文献
5.
Numerical simulation of non-linear regular and focused waves in an infinite water-depth 总被引：3，自引：0，他引：3
Inviscid three-dimensional free surface wave motions are simulated using a novel quadratic higher order boundary element model (HOBEM) based on potential theory for irrotational, incompressible fluid flow in an infinite water-depth. The free surface boundary conditions are fully non-linear. Based on the use of images, a channel Green function is developed and applied to the present model so that two lateral surfaces of an infinite-depth wave tank can be excluded from the calculation domain. In order to generate incident waves and dissipate outgoing waves, a non-reflective wave generator, composed of a series of vertically aligned point sources in the computational domain, is used in conjunction with upstream and downstream damping layers. Numerical experiments are carried out, with linear and fully non-linear, regular and focused waves. It can be seen from the results that the present approach is effective in generating a specified wave profile in an infinite water-depth without reflection at the open boundaries, and fully non-linear numerical simulations compare well with theoretical solutions. The present numerical technique is aimed at efficient modelling of the non-linear wave interactions with ocean structures in deep water. 相似文献
6.
7.
8.
A time-domain method is applied to simulate nonlinear wave diffraction around a surface piercing 3-D arbitrary body. The method involves the application of Taylor series expansions and the use of perturbation procedure to establish the corresponding boundary value problems with respect to a time-independent fluid domain. A boundary element method based on B-spline expansion is used to calculate the wave field at each time step, and the free surface boundary condition is satisfied to the second order of wave steepness by a numerical integration in time. An artificial damping layer is adopted on the free surface for the removal of wave reflection from the outer boundary. As an illustration, the method is used to compute the second-order wave forces and run-up on a surface-piercing circular cylinder. The present method is found to be accurate, computationally efficient, and numerically stable. 相似文献
9.
本文用有限元法配合时步处理来求解三维非线性水波的绕射问题,自由表面条件和物面条件都满足到二阶,采用人工阻尼区来吸收反射波,流场内的速度势通过求解有限元方程得到。对垂直圆柱体的绕射问题进行了计算,得到了自由表面波高时间历程和圆柱所受到的波浪力,计算结果和有关文献的理论计算结果进行了比较。 相似文献
10.
采用二阶时域理论对非线性波浪在任意三维物体周围的绕射问题进行了研究，对自由表面边界条件进行Taylor级数展开，应用摄动展开可以建立相应的边值问题，而且此边值问题的计算域不随时间变化，运用基于B－样条的边界元方法求解每一时刻的波浪场，二阶自由表面边界条件在时间上进行数值积分，在自由表面加了一个人工阻尼层以避免波浪的反射，速度势分解为已知的入射势和未知的散射势，初始条件采用二阶Stokes波浪场，通过加入物体表面边界条件，得到散射势在时间和空间上的发展，本文对圆柱所受规则波的二阶波浪力和波浪爬高进行了计算，数值结果表明此理论计算准确，效率高，数值稳定。 相似文献
11.
The two-dimensional nonlinear time domain free surface flow problem is analysed using potential flow theory. The problem is solved by a time marching method. At each time step two numerical approaches are used. One is based on the boundary element method in the complex plane. The complex potential is assumed to vary linearly within each element and the solution is obtained by imposing the boundary conditions at the nodes of the elements. The other approach is based on the finite element formulation. Triangular elements and linear shape functions are used. The solution is obtained by the Galerkin method. Numerical results are obtained for the wave elevation generated by a vertical wave maker. Results are also provided for a circular cylinder oscillating below the free surface. For these cases the finite element method is found to provide substantially more efficient computations than the boundary element method using equivalent discretizations. 相似文献
12.
The behavior of a highly deformable membrane to ocean waves was studied by coupling a nonlinear boundary element model of the fluid domain to a nonlinear finite element model of the membrane. The hydrodynamic loadings induced by water waves are computed assuming large body hydrodynamics and ideal fluid flow and then solving the transient diffraction/radiation problem. Either linear waves or finite amplitude waves can be assumed in the model and thus the nonlinear kinematic and dynamic free surface boundary conditions are solved iteratively. The nonlinear nature of the boundary condition requires a time domain solution. To implicitly include time in the governing field equation, Volterra's method was used. The approach is the same as the typical boundary element method for a fluid domain where the governing field equation is the starting point. The difference is that in Volterra's method the time derivative of the governing field equation becomes the starting point.The boundary element model was then coupled through an iterative process to a finite element model of membrane structures. The coupled model predicts the nonlinear interaction of nonlinear water waves with highly deformable bodies. To verify the coupled model a large scale test was conducted in the OH Hinsdale wave Research Laboratory at Oregon State University on a 3-ft-diameter fabric cylinder submerged in the wave tank. The model data verified the numerical prediction of the structure displacements and of the changes in the wave field.The boundary element model is an ideal modeling technique for modeling the fluid domain when the governing field equations is the Laplace equation. In this case the nonlinear boundary element model was coupled with a finite element model of membrane structures, but the model could have been coupled with other finite element models of more rigid structures, such as a pontoon floating breakwater. 相似文献
13.
A numerical solution is developed to investigate the generation and propagation of small-amplitude water waves in a semi-infinite rectangular wave basin. The three-dimensional wave field is produced by the prescribed “snake-like” motion of an array of segmented wave generators located along the wall at one end of the tank. The solution technique is based on the boundary element approach and uses an appropriate three-dimensional Green function which explicitly satisfies the tank-wall boundary conditions. The Green function and its derivatives which appear in the integral equation formulation can be shown to be slowly convergent when the source and field points are in close proximity. Therefore, when computing the velocity potentials on the wave generators, the source points are chosen outside the fluid domain, thereby ensuring the rapid convergence of these functions and rendering the integral equations non-singular. Numerical results are shown which illustrate the influence of the various wavemaker and basin parameters on the generated wave field. Finally, the complete wave field produced by the diffraction of oblique waves by a vertical circular cylinder in a basin is presented. 相似文献
14.
Transient Hydroelastic Response of VLFS by FEM with Impedance Boundary Conditions in Time Domain 总被引：1，自引：1，他引：1
A time-dependent finite element method (FEM) is developed to analyze the transient hydroelastie responses of very large floating structures (VLFS) subjected to dynamic loads. The hydrodynamic problem is formulated based on the linear theory of fluid and the structural response is analyzed based on the thin plate theory. The FEM truncates the unbounded fluid domain by introducing an artificial boundary surface, thus defining a finite computational domain. At this boundary surface an impedance boundary conditions are applied so that no wave reflections occur. In the proposed scheme, all of the procedures are processed directly in time domain, which is efficient for nonlinear analyses of structure floating on unbounded fluid. Numerical results indicate acceptable accuracy of the proposed method. 相似文献
15.
16.
The problem of a uniform current passing through a circular cylinder submerged below an ice sheet is considered. The fluid flow is described by the linearized velocity potential theory, while the ice sheet is modelled through a thin elastic plate floating on the water surface. The Green function due to a source is first derived, which satisfies all the boundary conditions apart from that on the body surface. Through differentiating the Green function with respect to the source position, the multipoles are obtained. This allows the disturbed velocity potential to be constructed in the form of an infinite series with unknown coefficients which are obtained from the boundary condition. The result shows that there is a critical Froude number which depends on the physical properties of the ice sheet. Below this number there will be no flexural waves propagating to infinity and above this number there will be two waves, one on each side of the body. When the depth based Froude number is larger than 1, there will always be a wave at far upstream of the body. This is similar to those noticed in the related problem and is different from that in the free surface problem without ice sheet. Various results are provided, including the properties of the dispersion equation, resistance and lift, ice sheet deflection, and their physical features are discussed. 相似文献
17.
A composite numerical model for wave diffraction in a harbor with varying water depth 总被引：2，自引：2，他引：0
A composite numerical model is presented for computing the wave field in a harbor. The mild slope equation is discretized by a finite element method in the domain concerned. Out of the computational domain, the water depth is assumed to be constant. The boundary element method is applied to the outer boundary for dealing with the infinite boundary condition. Because the model satisfies strictly the infinite boundary condition, more accurate results can be obtained. The model is firstly applied to compute the wave diffraction in a narrow rectangular bay and the wave diffraction from a porous cylinder. The numerical results are compared with the analytical solution, experimental data and other numerical results. Good agreements are obtained. Then the model is applied to computing the wave diffraction in a square harbor with varying water depth. The effects of the water depth in the harbor and the incoming wave direction on the wave height distribution are discussed. 相似文献
18.
A composite numerical model is presented for computing the wave field in a harbor. The mild slope equation is discretized by a finite element method in the domain concerned. Out of the computational domain, the water depth is assumed to be constant. The boundary element method is applied to the outer boundary for dealing with the infinite boundary condition. Because the model satisfies strictly the infinite boundary condition, more accurate results can be obtained. The model is firstly applied to compute the wave diffraction in a narrow rectangular bay and the wave diffraction from a porous cylinder. The numerical results are compared with the analytical solution, experimental data and other numerical results. Good agreements are obtained. Then the model is applied to computing the wave diffraction in a square harbor with varying water depth. The effects of the water depth in the harbor and the incoming wave direction on the wave height distribution are discussed. 相似文献
19.
The finite element method(FEM) is employed to analyze the resonant oscillations of the liquid confined within multiple or an array of floating bodies with fully nonlinear boundary conditions on the free surface and the body surface in two dimensions.The velocity potentials at each time step are obtained through the FEM with 8-node quadratic shape functions.The finite element linear system is solved by the conjugate gradient(CG) method with a symmetric successive overelaxlation(SSOR) preconditioner.The waves at the open boundary are absorbed by the combination of the damping zone method and the Sommerfeld-Orlanski equation.Numerical examples are given by an array of floating wedgeshaped cylinders and rectangular cylinders.Results are provided for heave motions including wave elevations,profiles and hydrodynamic forces.Comparisons are made in several cases with the results obtained from the second order solution in the time domain.It is found that the wave amplitude in the middle region of the array is larger than those in other places,and the hydrodynamic force on a cylinder increases with the cylinder closing to the middle of the array. 相似文献
20.
Extension of the Frequency-Domain pFFT Method for Wave Structure Interaction in Finite Depth 总被引：1，自引：0，他引：1
To analyze wave interaction with a large scale body in the frequency domain, a precorrected Fast Fourier Transform (pFFT) method has been proposed for infinite depth problems with the deep water Green function, as it can form a matrix with Toeplitz and Hankel properties. In this paper, a method is proposed to decompose the finite depth Green function into two terms, which can form matrices with the Toeplitz and a Hankel properties respectively. Then, a pFFT method for finite depth problems is developed. Based on the pFFT method, a numerical code pFFT-HOBEM is developed with the discretization of high order elements. The model is validated, and examinations on the computing efficiency and memory requirement of the new method have also been carried out. It shows that the new method has the same advantages as that for infinite depth. 相似文献