共查询到20条相似文献，搜索用时 343 毫秒
1.
《中国海洋工程》2015,(4)
Boundary Collocation Method(BCM) based on Eigenfunction Expansion Method(EEM), a new numerical method for solving two-dimensional wave problems, is developed. To verify the method, wave problems on a series of beaches with different geometries are solved, and the errors of the method are analyzed. The calculation firmly confirms that the results will be more precise if we choose more rational points on the beach. The application of BCM, available for the problems with irregular domains and arbitrary boundary conditions, can effectively avoid complex calculation and programming. It can be widely used in ocean engineering. 相似文献
2.
3.
综合考虑多种变形因素的近岸规则波传播数学模型Ⅰ. 基本方程的导出 总被引：1，自引：0，他引：1
推广了Kirby的有环境水流影响的缓坡方程,得到了综合考虑环境水流(水流因子)、非线性弥散影响(非线性因子)、底摩擦波能损失(底摩擦因子)、非缓坡地形影响(地形因子)、折射、绕射、波浪破碎多种变形因素的波浪传播控制方程,并给出了非线性因子、地形因子、底摩擦因子、水流因子的确定方法。基于导出的方程做进一步推导,得到了波高和波向为变量的综合考虑多种变形因素的波浪传播基本方程,该方程有许多优点:1)其绕开了求解波势函数的困难,将椭圆型方程的边值问题化为初值问题;2)直接求解波高和波向;3)可采用有限差分法离散求解,对空间步长没有限制,适合大面积海区波场计算;4)综合考虑了多种波浪变形因素,方程更为合理,5)容易处理波浪破碎问题。 相似文献
4.
推算波浪多年一遇波高的新方法 总被引：5，自引：0，他引：5
采用卫星遥感推算多年一遇波高的新方法，对中国近海多年一遇波高进行推算研究。运用卫星遥感散射计得到的风资料推算了整个渤海区域波浪多年一遇的波高分布。通过与有实测资料4个点推算的结果比较表明：卫星资料和实测计算的误差随着重现期的增大而减小，最大误差百年和50年一遇波高为20cm；而百年和50年一遇波高正是工程中最为关心的，说明运用卫星遥感散射计风资料推算渤海多年一遇波高可行且结果合理。本研究方法为进一步运用和完善卫星遥感资料推算中国近海多年一波高场提供了一条新途径。 相似文献
5.
为了研究波浪非线性对爬高的影响,解决防波堤等工程设计的实际问题,通过对数学模型试验、物理模型试验、规范公式得到的防波堤波浪爬高对比分析,分析了非线性主要影响参数厄塞尔数、相对水深和波陡对波浪爬高的影响规律,指出规范公式计算时存在的缺陷,并对其计算公式、适用范围进行修正、拟合,得到了强非线性规则波浪爬高的计算方法,可适用于斜坡堤断面的波浪爬高计算,与物理模型试验和数学模型试验结果对比表明,新的波浪爬高计算公式具有较好的计算精度,研究结果可为防波堤等实际工程设计提供重要参考。 相似文献
6.
方形网箱水平波浪力的迭加计算和实验验证 总被引：4，自引：3，他引：4
采用小直径圆柱体绕流理论和网渔具理论为基础的经验水动力计算法，分别考虑网箱框架是刚性体、网衣和绳索是柔性体的特征，结合正弦波理论对方形网箱及其构件受到的水平波浪力特性进行了分析研究，理论给出了波浪力迭加计算法，并把计算结果与小尺度的网箱水槽实验进行对比验证。结果表明，计算数值与试验数据较接近，平均误差率在15％以内。网箱水平波浪力呈周期性、不对称变化，在波浪周期小于0.72s时，主要以框架的波浪力为主，反之以网衣的为主。在波长为0.8m、周期为0.72s、水深为0.7m、波高为68.3mm情形下，计算结果显示网箱的框架尺寸和形状及其系泊、布局的选择应根据实际海况而定，网箱高度可适当增加，当设置水层下降深度相对于网箱高度比率为20％-40％，时，波浪力峰值下降相对率达68.03％-88.20％，表明可以较大程度地降低其波浪力。 相似文献
7.
8.
Wave radiation stress is the main driving force of wave-induced near-shore currents. It is directly related to the hydrodynamic characteristics of near-shore current whether the calculation of wave radiation stress is accurate or not. Irregular waves are more capable of reacting wave motion in the ocean compared to regular waves.Therefore, the calculation of the radiation stress under irregular waves will be more able to reflect the wave driving force in the actual near-shore current. Exact solution and approximate solution of the irregular wave radiation stress are derived in this paper and the two kinds of calculation methods are compared. On the basis of this, the experimental results are used to further verify the calculation of wave energy in the approximate calculation method. The results show that the approximate calculation method of irregular wave radiation stress has a good accuracy under the condition of narrow-band spectrum, which can save a lot of computing time, and thus improve the efficiency of calculation. However, the exact calculation method can more accurately reflect the fluctuation of radiation stress at each moment and each location. 相似文献
9.
畸形波传播速度实验和数值模拟研究 总被引：1，自引：1，他引：0
畸形波的传播速度是其最重要的特征参数之一。研究畸形波的传播速度有助于深入和全面了解畸形波的生成机理及其演化过程,另外还可以用于畸形波的预报。针对现有关于畸形波传播速度计算方法(高阶Stokes波理论近似估算,Hilbert变换和两固定点的距离除以畸形波的波峰经过两点所用时间)的不准确性和局限性,使用32个测点描述畸形波波峰沿波浪水槽的运动轨迹,再用回归分析法估算波峰运动轨迹与时间的相关关系,从而计算出畸形波的传播速度。基于288组物理模拟畸形波和364组数值模拟畸形波传播速度的计算结果,使用回归分析方法得出了畸形波传播速度的半经验半理论计算公式,同时还分析了畸形波传播速度的强非线性特征。 相似文献
10.
Okey Nwogu 《Applied Ocean Research》1989,11(4):176-182
A procedure for estimating directional wave spectra from an array of wave probes based on the Maximum Entropy Method (MEM) is developed in the present paper. The MEM approach yields an angular spreading function at each frequency band consistent with the input cross-spectral density matrix. The method is evaluated using numerical simulations of directional sea states. The MEM is also used to analyze data obtained from the three-dimensional wave basin of the Hydraulics Laboratory, National Research Council of Canada. Finally, the MEM is compared with the Maximum Likelihood Method (MLM) and is shown to be a powerful tool for directional wave analysis. 相似文献
11.
Li Dejun Shen Guoguang Wang Rixin Cheng Hong Professor Dept. of Ocean Architecture Engineering Tianjin University Tianjin Lecturer Dept. of Ocean Architecture Engineering Tianjin University Tianjin Engineer Naval Research Centre P. L. A. of China Beijing 《中国海洋工程》1995,(4)
Using the axial symmetry results of marker and cell (MAC) method as initial value in this paper, two numerical calculating methods are presented for the late wavemaking response induced by explosion in harbour. One of the methods is the superposition method of the vibration mode based on fluid slosh in container. Another one is the joining method of the MAC results with the shallow wave theory calculation in time domain. As a practical example, it is conducted to the numerical calculation about 1000 ton TNT equivalent explosion within touch of water surface. The results show that it can be rationally described with the methods to the wavemaking progress and character. The numerical results are identical with the observed scene on the spot experiment. The methods are simple and applicable in the engineering design. 相似文献
12.
This paper concerns the calculation of wave height exceedance probabilities for nonlinear irregular waves in transitional water depths, and a Transformed Rayleigh method is first proposed for carrying out the calculation. In the proposed Transformed Rayleigh method, the transformation model is chosen to be a monotonic exponential function, calibrated such that the first three moments of the transformed model match the moments of the true process. The proposed new method has been applied for calculating the wave height exceedance probabilities of a sea state with the surface elevation data measured at the Poseidon platform. It is demonstrated in this case that the proposed new method can offer better predictions than those by using the conventional Rayleigh wave height distribution model. The proposed new method has been further applied for calculating the total horizontal loads on a generic jacket, and its accuracy has once again been substantiated. The research findings gained from this study demonstrate that the proposed Transformed Rayleigh model can be utilized as a promising alternative to the well-established nonlinear wave height distribution models. 相似文献
13.
14.
A novel Boundary Element Method (BEM) named the second-order Taylor Expansion Boundary Element Method (the 2nd order TEBEM) is developed for the solution of the second-order wave radiation velocity potential and sum-frequency wave loads for floating bodies. The radiation condition is enforced by a hybrid method of the multi-transmitting formula and damping zone. For the interior domain problem of a cube and a sphere, numerical results demonstrate that the 2nd order TEBEM can accurately solve the first and second-order gradients of velocity potential on the no-smoothed and smoothed boundary compared to the low-order BEM. The double frequency forces acting on the truncated cylinder are calculated under finite water depth. The agreement between the 2nd order TEBEM and others' numerical results is good. Moreover, all of the singular integrals in the 2nd order TEBEM can be solved analytically, so its implementation is much easier compared to the high-order BEM. 相似文献
15.
Shutang Zhu 《Ocean Engineering》1999,26(12):535
This paper presents a transfer function method (TFM) which can separate a regular wave field into incident and reflected waves based on the linear wave theory. The TFM uses specific transfer functions and corresponding convolution integrals to separate time series data measured in a combined partial standing wave system into incident and reflected waves. After this separation, estimation of the reflection coefficient becomes very easy. All manipulations have been performed in time domain. Furthermore, this method does not involve the calculation of wave heights and/or phase differences. The present method is demonstrated through numerical sample and physical model experiments carried out in a wave flume. Compared with other methods, the TFM gives much better estimates of the incident wave heights for physical model experiments in this study. 相似文献
16.
A shared-memory parallelization is implemented to the recently developed Consistent Particle. Method (CPM) for violent wave impact problems. The advantages of this relatively new particle method lie in four key aspects: (1) accurate computation of Laplacian and gradient operators based on Taylor series expansion, alleviating spurious pressure fluctuation and being able to model two-phase flows characterized by large density difference, (2) a thermodynamics-based compressible solver for modelling compressible air that eliminates the need of determining artificial sound speed, (3) seamless coupling of the compressible air solver and incompressible water solver, and (4) parallelization of the numerical model based on Open Multi-Processing (OpenMP) and a parallel direct sparse solver (Pardiso) to significantly improve computational efficiency. Strong and weak scaling analyses of the parallelized CPM are conducted, showing an efficiency speedup of 100 times or more depending on the size of simulated problem. To demonstrate the accuracy of the developed numerical model, three numerical examples are studied including the benchmark study of wave impact on seawall, and our experimental studies of violent water sloshing under rotational excitations and sloshing impact with entrapped air pocket. CPM is shown to accurately capture highly deformed breaking waves and violent wave impact pressure including pressure oscillation induced by air cushion effect. 相似文献
17.
1 .ＩｎｔｒｏｄｕｃｔｉｏｎＴｏｍｅａｓｕｒｅｔｈｅｒｅｆｌｅｃｔｉｏｎｏｆｉｎｃｉｄｅｎｔｗａｖｅｓｐｒｏｄｕｃｅｄｂｙａｐｈｙｓｉｃａｌｍｏｄｅｌｉｎａｗａｖｅｆｌｕｍｅｉｓａｃｏｍｍｏｎｐｒｏｂｌｅｍｗｉｔｈｐｈｙｓｉｃａｌｔｅｓｔｓｏｆｗａｖｅａｃｔｉｏｎｏｎｃｏａｓｔａｌｓｔｒｕｃｔｕｒｅｓ .Ｗａｖｅｓｇｅｎｅｒａｔｅｄｂｙｔｈｅｗａｖｅ ｍａｋｅｒｐｒｏｐａｇａｔｅｆｏｒｗａｒｄｉｎｔｈｅｗａｖｅｆｌｕｍｅａｎｄａｒｅｒｅｆｌｅｃｔｅｄｂｙｔｈｅｐｈｙｓｉｃａｌｍｏｄｅｌ,ａｎｄｔｈｅ… 相似文献
18.
海洋波浪能平均功率的准确计算是波浪能开发和利用的基础。实践中，波浪能转换装置一般安装在有限水深区域。对于随机波，只有当详尽的波浪谱已知的时候，有限水深区的波能功率才能被准确计算出来。由于种种原因，实践中波浪的实测数据大多以散点图或有义波高和统计波周期的形式给出，而波浪谱信息有时则很难获得。基于这种情况，传统上人们利用无限水深条件下的相关公式来估算有限水深区域的波能功率，但这种做法会造成较大的误差。本研究显示，对于50 m水深的理论波谱JONSWAP谱来说该误差高达14.6%。为了提高波能功率计算的准确性，本文提出了一种基于能量频率的一阶和二阶近似算法，可以在未知波浪谱的情况下较为准确地计算不同水深时的波能功率。针对两种理论波浪谱的计算结果表明，本方法在计算有限带宽内的波能功率时计算误差低于2.8%。 相似文献
19.
以方形立柱作为研究对象，对其在聚焦波作用下的波浪力特性进行研究。研究主要基于计算流体力学数值方法，对聚焦波作用下方形立柱在固定、单自由度纵荡、单自由度垂荡三种运动状态下所受波浪力进行研究。利用phase-inversion逆相位分解方法对其高阶力特性进行分析。首先对聚焦波生成方法、数值计算方法与参数设置进行简要介绍，其次展示了三种运动状态下立柱在聚焦波作用下所受波浪力，并对其进行分析，最后利用phase-inversion逆相位分解方法获得高阶波浪力成分并对其载荷特性进行分析讨论。研究发现逆相位分解方法可以有效分离波浪力高阶成分，不同运动状态下立柱所受波浪力会有显著不同。 相似文献
20.
Calculation of Wave Radiation Stress in Combination with Parabolic Mild Slope Equation 总被引：1，自引：1，他引：0
ZHENG Yonghong 《中国海洋工程》2000,14(4):495-502
A new method for the calculation of wave radiation stress is proposed by linking the expres-sions for wave radiation stress with the variables in the parabolic mild slope equation.The governing equa-tions are solved numerically by the finite difference method.Numerical results show that the new methodis accurate enough,can be efficiently solved with little programming effort,and can be applied to the calcu-lation of wave radiation stress for large coastal areas. 相似文献