共查询到20条相似文献，搜索用时 80 毫秒
1.
地震震相拾取是地震数据自动处理的首要环节,包括了信号检测、到时估计和震相识别等过程,震相拾取的准确性直接影响到后续事件关联处理的性能,影响观测报告的质量.为了提高震相拾取的准确性,进而提高观测报告质量,本文采用深度卷积神经网络方法来解决震相拾取问题,构建了多任务卷积神经网络模型,设计了分类和回归的联合损失函数,定义了基于加权的分类损失函数,以三分量地震台站的波形数据作为输入,同时实现对震相的检测识别和到时的精确估计.利用美国南加州地震台网的200万条震相和噪声数据对模型进行训练、验证和测试,对于测试集中直达波P、S震相识别的查全率达到98%以上,到时估计的标准偏差分别为0.067s,0.082s.利用迁移学习和数据增强,将模型用于对我国东北地区台网的6个台站13000条数据的训练、验证和测试中,对该数据集P、S震相查全率分别达到91.21%、85.65%.基于迁移训练后的模型,设计了用于连续数据的震相拾取方法,利用连续的地震数据对该算法进行了实际应用测试,并与国家数据中心和中国地震局的观测报告进行比对,该方法的震相检测识别率平均可达84.5%,验证了该方法在实际应用中的有效性.本文所提出的方法展示了深度神经网络在地震震相拾取中的优异性能,为地震震相和事件的检测识别提供了新的思路. 相似文献
2.
The Anak Krakatau volcano (Indonesia) has been monitored by a multi-parametric system since 2005. A variety of signal types can be observed in the records of the seismic stations installed on the island volcano. These include volcano-induced signals such as LP, VT, and tremor-type events as well as signals not originating from the volcano such as regional tectonic earthquakes and transient noise signals. The work presented here aims at the realization of a system that automatically detects and identifies the signals in order to estimate and monitor current activity states of the volcano. An artificial neural network approach was chosen for the identification task. A set of parameters was defined, describing waveform and spectrogram properties of events detected by an amplitude-ratio-based (STA/LTA) algorithm. The parameters are fed into a neural network which is, after a training phase, able to generalize input data and identify corresponding event types. The success of the identification depends on the network architecture and training strategy. Several tests have been performed in order to determine appropriate network layout and training for the given problem. The performance of the final system is found to be well suited to get an overview of the seismic activity recorded at the volcano. The reliability of the network classifier, as well as general drawbacks of the methods used, are discussed. 相似文献
3.
Current deep neural networks (DNN) used for seismic phase picking are becoming more complex, which consumes much computing time without significant accuracy improvement. In this study, we introduce a cascaded classification and regression framework for seismic phase picking, named as the classification and regression phase net (CRPN), which contains two convolutional neural network (CNN) models with different complexity to meet the requirements of accuracy and efficiency. The first stage of the CRPN are shallow CNNs used for rapid detection of seismic phase and picking P and S arrival times for earthquakes with magnitude larger than 2.0, respectively. The second stage of CRPN is used for high precision classification and regression. The regression is designed to reduce the time difference between the probability maximum and the real arrival time. After being trained using 500,000 P and S phases, the CRPN can process 400 hours’ seismic data per second, whose sampling rate is 1 Hz and 25 Hz for the two stages, respectively, on a Nvidia K2200 GPU, and pick 93% P and 89% S phases with the error being reduced by 0.1s after regression correction. 相似文献
4.
Automatic identification of noisy seismic events is still a problem. The process involves the analysis of complex relationships between data from different sources. Moreover, there are disturbing factors such as poor signal-to-noise ratio, the presence of accidental bursts of man-made noise, and changes in the amplitude and phase of the waves as they travel through the medium. The amount of observed data increases rapidly, so it is imperative to develop suitable and effective methods for processing and analyzing the influx of big data. Artificial neural networks (ANNs) show promise as a disruptive technology that will accelerate and improve analysis of seismic signals. ANNs are easy to apply, and the results often outperform alternative methods. This paper gives an overview of the highs and lows of neural networks, discusses the possibility of routine processing of seismic signals using ANNs, and presents examples of some interesting applications. It is hoped that researchers who read the article will actively use this technique, because ANNs could become more robust and flexible for solving complex problems that currently cannot be solved by the standard approach. 相似文献
5.
Location Calibration Data for CTBT Monitoring at the Prototype International Data Center 总被引：3，自引：0，他引：3
—?Ground-truth information is essential for location calibration of the International Monitoring System network being developed under the Comprehensive Nuclear-Test-Ban Treaty. The objective of the calibration effort is to improve the accuracy of seismic event locations and to reduce the size of the error ellipse, both in automatic and in human analyst-reviewed bulletins, in order to meet the On-Site Inspection requirement for the size of the inspection area. Several databases were compiled and are maintained at the Prototype International Data Center (PIDC) to support calibration efforts. The Nuclear Explosion Database contains most readily accessible information about all nuclear explosions worldwide. The events in the Calibration Event Bulletin (CEB) carefully selected well located events from the PIDC Reviewed Event Bulletin and relocated using additional arrivals from regional networks requested from various National Data Centers. The Ground-Truth Database contains carefully selected events with known or well estimated location accuracies from the Nuclear Explosion Database, CEB, as well as from bulletins of U.S. National Earthquake Information Center and International Seismic Centre. It also contains data on chemical explosions and quarry blasts when confirmed by local or national authorities. Ground-truth events are subdivided into various ground-truth categories according to their location accuracy. The databases have been used in various calibration studies to derive and test corrections to improve event locations. Several location calibration techniques are briefly described. The validation test for any proposed operational change requires that the results meet the location calibration metrics developed and implemented at the PIDC. 相似文献
6.
In many areas of the world, the presence of shallow high velocity, highly heterogeneous layers complicate seismic imaging of deeper reflectors. Of particular economic interest are areas where potentially hydrocarbon-bearing strata are obscured by layers of basalt. Basalt layers are highly reflective and heterogeneous. Using reflection seismic, top basalt is typified by a high-amplitude, coherent reflector with poor resolution of reflectors below the basalt, and even bottom basalt. Here, we present a new approach to the imaging problem using the pattern recognition abilities of a back-propagation Artificial Neural Network (ANN). ANNs are computational systems that attempt to mimic natural biological neural networks. They have the ability to recognize patterns and develop their own generalizations about a given data set. Back-propagation neural networks are trained on data sets for which the solution is known and tested on the data that are not previously presented to the ANN in order to validate the network result. We show that Artificial Neural Networks, due to their pattern recognition capabilities, can invert the medium statistics based on the seismic character. We produce statistically defined models involving a basalt analogous layer, and calculate full wavefield finite difference synthetic seismograms. We vary basalt layer thickness and source frequency to generate a synthetic model that produces seismic that is similar to real sub-basalt seismic, i.e. high amplitude top basalt reflector and the absence of base basalt and sub-basalt events. Using synthetic shot gathers, generated in a synthetic representation of the sub-basalt case, we can invert the velocity medium standard deviation by using an ANN. By inverting the velocity medium standard deviation, we successfully identified the transition from basalt to sub-basalt on the synthetic shot gathers. We also show that ANNs are capable of identifying the basalt to sub-basalt transition in the presence of incoherent noise. This is important for any future applications of this technique to the real-world seismic data, as this data is never completely noise-free. There is always a certain level of residual (noise remaining after initial noise filtering) environmental/ambient noise present on the recorded seismics, hence, neural network training with noise-free synthetic seismic is less than optimal. 相似文献
7.
将识别地震的深度学习算法PhaseNet应用于四川台网和首都圈台网,对该模型的泛化能力进行了测试和评估.首先利用2010年1月至2018年10月首都圈台网199个地震台站记录的29 328个事件(ML0～ML4)所对应的126761段事件波形,以及2019年4-9月四川及邻省部分台网227个地震台站记录的16595个事... 相似文献
8.
Artificial neural networks (ANN) have been used in a variety of problems in the fields of science and engineering. Applications of ANN to the geophysical problems have increased within the last decade. In particular, it has been used to solve such inversion problems as seismic, electromagnetic, resistivity. There are also some other applications such as parameter estimation, prediction, and classification. In this study, multilayer perceptron neural networks (MLPNN) and radial basis function neural networks (RBFNN) were applied to synthetic gravity data and Seferihisar gravity data to investigate the applicability and performance of these networks for the method of gravity. Additionally performance of MLPNN and RBFNN were tested by adding random noise to the same synthetic test data. The structure parameters, such as the depths, the density contrasts, and the locations of the structures were obtained closely for different signal-to-noise ratios (S/N). Bouguer data of Seferihisar area were analyzed by MLPNN and RBFNN to estimate depth, density contrast, and location of the structure. The results of MLPNN, RBFNN, and classical inversion method were compared for real data obtained from Seferihisar Geothermal area and similar structure parameters were obtained. The experiments show that in general RBFNN not only increases the speed of the training stage enormously, but also provides slightly better performance. 相似文献
9.
提出了一种用于地震早期预警的S波震相实时自动识别方法. 该方法不对原始信号进行任何滤波处理, 直接对三分向记录进行计算分析. 首先根据P波前0.5 s数据的卓越频率计算适用于该三分向记录的窗长, 采用由偏斜角和水平能量与总能量比值的平方积作为确定S波识别区间的特征函数, 将特征函数已有数据的5倍均值和5倍方差之和作为识别区间的触发阈值; 然后采用VAR-AIC方法对两个水平分向识别区间的数据分别计算分析, 对两个识别结果进行判断, 最终确定S波初动时刻. 经过对118个三分向记录的实际应用验证, 通过自动识别结果与人机交互震相识别结果相比, 本文方法对于S波相对P波尾波信噪比大于5 dB的地震记录, 其识别误差小于0.1 s的概率高达89.39%. 相似文献
10.
《Soil Dynamics and Earthquake Engineering》2000,20(1-4)
The paper deals with an application of neural networks for detection of natural periods of vibrations of prefabricated, medium height buildings. The neural network technique is also used to simulate the dynamic response at selected floor of one of the analysed buildings subject to seismic loading induced by explosives in a nearby quarry. Both the training and testing patterns were formulated on the basis of measurements performed on actual structures. The results of neural network identification of natural periods of the considered buildings obtained with different soil, geometrical and stiffness parameters are compared with the results of experiments. The application of back-propagation neural networks enables us to identify the natural periods of the buildings with accuracy quite satisfactory for engineering practice. The experimental and generated data of vibration displacements are compared and much clearer comparison is given on the phase plane: displacements versus velocities. It was stated that a good generalization takes place both with respect to displacements and velocities. 相似文献
11.
Within the field of seismic data acquisition with active sources, the technique of acquiring simultaneous data, also known as blended data, offers operational advantages. The preferred processing of blended data starts with a step of deblending, that is separation of the data acquired by the different sources, to produce data that mimic data from a conventional seismic acquisition and can be effectively processed by standard methods. Recently, deep learning methods based on the deep neural network have been applied to the deblending task with promising results, in particular using an iterative approach. We propose an enhancement to deblending with an iterative deep neural network, whereby we modify the training stage of the deep neural network in order to achieve better performance through the iterations. We refer to the method that only uses the blended data as the input data as the general training method. Our new multi-data training method allows the deep neural network to be trained by the data set with the input patches composed of blended data, noisy data with low amplitude crosstalk noise, and unblended data, which can improve the ability of the deep neural network to remove crosstalk noise and protect weak signal. Based on such an extended training data set, the multi-data training method embedded in the iterative separation framework can result in different outputs at different iterations and converge to the best result in a shorter iteration number. Transfer learning can further improve the generalization and separation efficacy of our proposed method to deblend the simultaneous-source data. Our proposed method is tested on two synthetic data and two field data to prove the effectiveness and superiority in the deblending of the simultaneous-source data compared with the general training method, generic noise attenuation network and low-rank matrix factorization methods. 相似文献
12.
We propose to adopt a deep learning based framework using generative adversarial networks for ground-roll attenuation in land seismic data. Accounting for the non-stationary properties of seismic data and the associated ground-roll noise, we create training labels using local time–frequency transform and regularized non-stationary regression. The basic idea is to train the network using a few shot gathers such that the network can learn the weights associated with noise attenuation for the training shot gathers. We then apply the learned weights to test ground-roll attenuation on shot gathers, that are not a part of training input to obtain the desired signal. This approach gives results similar to local time–frequency transform and regularized non-stationary regression but at a significantly reduced computational cost. The proposed approach automates the ground-roll attenuation process without requiring any manual input in picking the parameters for each shot gather other than in the training data. Tests on field-data examples verify the effectiveness of the proposed approach. 相似文献
13.
Site classification is an important procedure for a reliable site-specific seismic hazard assessment. On the other hand, the site conditions at strong-motion stations are essential for accurate interpretation and analysis of the recorded ground motion data obtained from different regions of the world. For some countries with insufficient data on the subsurface geological settings, the required site condition information is not available. This paper presents a new and efficient approach for site classification based on artificial neural networks (ANN) along with a selected set of representative horizontal to vertical spectral ratio (HVSR) curves for four site classes. The nonlinear nature of ANN and their ability to learn in a complex environment make it highly suitable for function approximation and solving complicated engineering problems. Two types of radial basis function (RBF) neural networks, namely, probabilistic neural networks (PNN) and generalized regression neural networks (GRNN) were chosen in this study, as no separate training phase is required, rendering them particularly suitable for site classification. The proposed approach has been tested using data of the Chi-Chi, Taiwan, earthquake (Mw=7.6) recorded from 87 stations at which the site conditions are known. Analyses show that both the PNN and the GRNN perform very well with similar accuracy in estimating site conditions, with successful rates of 78% and 75%, respectively. 相似文献
14.
为了快速、高效地从地震数据中识别地震事件和拾取震相,本文利用基于样本增强的卷积神经网络自动震相拾取方法,将西藏林芝地区L0230台站3个月数据作为训练集,该区内另外6个台站连续1个月的波形数据作为测试集,采用高斯噪声、随机噪声拼接、随机挑选噪声、随机截取地震事件等4种样本增强的方法扩增训练集,以提高自动震相拾取技术的准确率。结果显示:样本增强前模型在测试集上的地震事件识别准确率为80%,样本增强后提升至97%,表明样本增强有效地提高了模型的泛化性能和抗干扰能力;在0.5 s误差范围内,震相自动拾取准确率高于81%,在1.0 s误差范围内,准确率高于95%;利用基于样本增强的卷积神经网络震相拾取方法能够检测出人工拾取震相中误标和漏检的震相。 相似文献
15.
G.S. O'Brien 《Geophysical Prospecting》2020,68(6):1758-1770
Seismically derived amplitude-versus-angle attributes along with well constraints are the base inputs into inverting seismic into subsurface properties. Conditioning the common image gathers is a common workflow in quantitative inversion and leads to a more accurate inversion product due to the removal of post-migration artefacts. Here, we apply a neural network to condition the post-migration gathers. The network is a cycle generative adversarial network, CycleGAN, which was designed for image-to-image translation. This can be considered the same problem as translating an artefact rich seismic gather to an artefact free seismic gather. To assess the feasibility of applying the network to pre-stack conditioning, synthetic data sets were generated to train different networks for different tasks. The networks were trained to remove white noise, residual de-multiples, gather flattening and a combination of the above for conditioning. The results show that a trained network was able remove white noise providing a more robust amplitude-versus-offset calculation. Another network trained using synthetic gathers with and without multiples assisted in multiple removal. However, instability around primary preservation has been observed so the network works better as a residual de-multiple method. For gather conditioning, a network was trained with the unpaired artefact-rich and artefact-free training data where the artefacts included complex moveout, noise and multiples. When applied to the test data sets, the networks cleaned the artefact-rich test data and translated complex moveout into flat gathers whilst preserving the amplitude response. Finally, two networks are applied to real data where a gather based on the well logs is used to quantify the match between the conditioned gathers and the raw gathers. The first network used synthetic data to train the network and, when applied to real data, provided a better tie with the well. The second network was trained with synthetic gathers whose properties were constrained by real seismic gathers from near the well. As anticipated, the network trained on the representative training data outperforms the network trained using the unconstrained data. However, the ability of the first network to condition the gather indicates that a sweep of networks can be trained without the need for real data and applied in a manner analogous to the way parameters are adjusted in traditional geophysical methods. The results show that the different neural networks can offer an alternative or augmentation to the existing geophysical workflow for conditioning pre-stack seismic gathers. 相似文献
16.
提出一种基于信号整体与局部特征的地震数据自动处理新方法, 该方法不同于以往仅采用包络线互相关来直接检测事件. 新方法依然按照检测、 识别、 关联和定位等4个步骤进行处理, 但在进行单个震相信号检测的同时, 也检测信号波列并利用其包络线特征来识别和关联震相. 文中详细阐述了数据处理过程中如何定义一个波列及抽取和应用其特征. 相关的数据处理技术目前已成功应用于区域台网的日常数据处理分析中. 作为例子, 给出了对新疆区域台网连续16天数据进行测试处理的结果. 实际应用结果表明, 这种新方法可以大幅度降低自动处理结果的误检、 漏检率, 在实际应用中具有很好的前景. 相似文献
17.
v--vThe prototype International Data Centre (IDC) in Arlington, Virginia has been acquiring data from seismic stations at locations designated in the Comprehensive Test-Ban Treaty for the International Monitoring System (IMS) since the start of 1995. A key characteristic of these stations is their background noise levels and their seasonal and diurnal variability. Since June 1997 an automated sample selection effort has collected over 700,000 individual noise sample spectra from 39 primary and 57 auxiliary stations. Monthly median and 5 and 95 percentile estimates have been calculated for each channel of every station. Compatibility of median spectra obtained for the same station and channel in the same month for two different years confirms the consistency of the noise-sampling algorithm used. A preliminary analysis of the results shows strong (more than a factor of two) seasonal variation at a quarter of all stations. Strong diurnal variations at half of the sites indicate that many of the selected sites are poorly located with respect to cultural noise sources. The results of this study are already being used to evaluate station quality, improve those processes that require background noise values, such as automatic association and requesting auxiliary station data, and to improve the estimation of station and network detection and location thresholds. 相似文献
18.
Gustavo Côrte Jesper Dramsch Hamed Amini Colin MacBeth 《Geophysical Prospecting》2020,68(7):2164-2185
In this work, we tackle the challenge of quantitative estimation of reservoir dynamic property variations during a period of production, directly from four-dimensional seismic data in the amplitude domain. We employ a deep neural network to invert four-dimensional seismic amplitude maps to the simultaneous changes in pressure, water and gas saturations. The method is applied to a real field data case, where, as is common in such applications, the data measured at the wells are insufficient for properly training deep neural networks, thus, the network is trained on synthetic data. Training on synthetic data offers much freedom in designing a training dataset, therefore, it is important to understand the impact of the data distribution on the inversion results. To define the best way to construct a synthetic training dataset, we perform a study on four different approaches to populating the training set making remarks on data sizes, network generality and the impact of physics-based constraints. Using the results of a reservoir simulation model to populate our training datasets, we demonstrate the benefits of restricting training samples to fluid flow consistent combinations in the dynamic reservoir property domain. With this the network learns the physical correlations present in the training set, incorporating this information into the inference process, which allows it to make inferences on properties to which the seismic data are most uncertain. Additionally, we demonstrate the importance of applying regularization techniques such as adding noise to the synthetic data for training and show a possibility of estimating uncertainties in the inversion results by training multiple networks. 相似文献
19.
Yu Qian Wang Chaofeng McKenna Frank Yu Stella X. Taciroglu Ertugrul Cetiner Barbaros Law Kincho H. 《地震工程与工程振动(英文版)》2020,19(4):827-838
Rapid and accurate identification of potential structural deficiencies is a crucial task in evaluating seismic vulnerability of large building inventories in a region. In the case of multi-story structures, abrupt vertical variations of story stiffness are known to significantly increase the likelihood of collapse during moderate or severe earthquakes. Identifying and retrofitting buildings with such irregularities—generally termed as soft-story buildings—is, therefore, vital in earthquake preparedness and loss mitigation efforts. Soft-story building identification through conventional means is a labor-intensive and time-consuming process. In this study, an automated procedure was devised based on deep learning techniques for identifying soft-story buildings from street-view images at a regional scale. A database containing a large number of building images and a semi-automated image labeling approach that effectively annotates new database entries was developed for developing the deep learning model. Extensive computational experiments were carried out to examine the effectiveness of the proposed procedure, and to gain insights into automated soft-story building identification.
相似文献20.
Prediction of effective porosity from seismic attributes using locally linear model tree algorithm 
下载免费PDF全文
下载免费PDF全文 Ahmad Ashtari Talkhestani 《Geophysical Prospecting》2015,63(3):680-693
In this study, a locally linear model tree algorithm was used to optimize a neuro‐fuzzy model for prediction of effective porosity from seismic attributes in one of Iranian oil fields located southwest of Iran. Valid identification of effective porosity distribution in fractured carbonate reservoirs is extremely essential for reservoir characterization. These high‐accuracy predictions facilitate efficient exploration and management of oil and gas resources. The multi‐attribute stepwise linear regression method was used to select five out of 26 seismic attributes one by one. These attributes introduced into the neuro‐fuzzy model to predict effective porosity. The neuro‐fuzzy model with seven locally linear models resulted in the lowest validation error. Moreover, a blind test was carried out at the location of two wells that were used neither in training nor validation. The results obtained from the validation and blind test of the model confirmed the ability of the proposed algorithm in predicting the effective porosity. In the end, the performance of this neuro‐fuzzy model was compared with two regular neural networks of a multi‐layer perceptron and a radial basis function, and the results show that a locally linear neuro‐fuzzy model trained by a locally linear model tree algorithm resulted in more accurate porosity prediction than standard neural networks, particularly in the case where irregularities increase in the data set. The production data have been also used to verify the reliability of the porosity model. The porosity sections through the two wells demonstrate that the porosity model conforms to the production rate of wells. Comparison of the locally linear neuro‐fuzzy model performance on different wells indicates that there is a distinct discrepancy in the performance of this model compared with the other techniques. This discrepancy in the performance is a function of the correlation between the model inputs and output. In the case where the strength of the relationship between seismic attributes and effective porosity decreases, the neuro‐fuzzy model results in more accurate prediction than regular neural networks, whereas the neuro‐fuzzy model has a close performance to neural networks if there is a strong relationship between seismic attributes and effective porosity. The effective porosity map, presented as the output of the method, shows a high‐porosity area in the centre of zone 2 of the Ilam reservoir. Furthermore, there is an extensive high‐porosity area in zone 4 of Sarvak that extends from the centre to the east of the reservoir. 相似文献