首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
Fluid inclusions and clusters of water molecules at nanometer-to submicron-scale in size have been investigated using transmission electron microscopy (TEM) and Fourier transform infrared spectroscopy (FTIR) in jadeite, quartz and symplectite aegirine–augite, albite, taramite and magnetite corona minerals from ultrahigh-pressure (UHP) jadeite–quartzite at Shuanghe, the Dabie Mountains, China. Fluid inclusions from 0.003 μm to 0.78 μm in size occur in jadeite and quartz crystals, and a small number of fluid inclusions from 0.001 μm to 0.25 μm have also been detected in symplectite-forming minerals. Most of the fluid inclusions have round or negative crystal morphology and contain aqueous fluids, but some contain CO2-rich fluids. They are usually connected to dislocations undetectable at an optical scale. The dislocations represent favorable paths for fluid leakage, accounting for non-decrepitation of most fluid inclusions when external pressure decreased at later stages, although there was partial decrepitation of some fluid inclusions unconnected to defect microstructures resulting from internal overpressure. Non-decrepitation and partial decrepitation of fluid inclusions resulted in changes of original composition and/or density. It is clear that identification of hidden re-equilibration features has significant implications for the petrological interpretation of post-peak metamorphic processes. Micro-FTIR results show that all jadeite and quartz samples contain structural water occurring as hydroxyl ions (OH−) and free water (H2O) in the form of clusters of water molecules. The H2O transformed from OH− during exhumation and could have triggered and enhanced early retrograde metamorphism of the host rocks and facilitated plastic deformation of jadeite and quartz grains by dislocation movement, and thus the H2O released during decompression might represent early-stage retrograde metamorphic fluid. The nominally anhydrous mineral (NAM) jadeite is able to transport aqueous fluids in concentrations of at least several hundred ppm water along a subduction zone to mantle depths in the form of clusters of water molecules and hydroxyl ions within crystals.  相似文献   

2.
A means for estimating pressures in natural samples based on both the coupled substitution (Na+)[1+] (Ti + [VI]Si)[4+] = (M)[2+] (Al + Cr)[3+], and the classic pyroxene-stoichiometry majorite-substitution into garnet at high-pressure, is derived for garnets with majoritic chemistry. The technique is based on a compilation of experimental data for different bulk compositions. It is compositionally and thermally robust and can be used to estimate pressures experienced by natural materials during formation of majoritic garnet. In addition, it can be used either retrospectively, or in new experimental studies to establish the pressures of crystallization of reaction products, and determine if disequilibrium is recorded by the chemistries of majoritic garnets. Pressures are calculated based on majoritic chemistries in chondritic meteorites and diamond inclusions. Majoritic garnets associated with Mg perovskite in shocked L chondrites (n = 4) yield uniform pressures of 23.8 ± 0.2 GPa that are slightly higher than pressures recorded by majoritic garnet in shock-derived melt veins in L chondrites (22.4 ± 0.6 GPa; n = 5). Similar pressures are also exhibited by shock-derived majoritic garnets in H chondrites (22.2 ± 1.1 GPa; n = 3). Diamond inclusions with eclogitic and peridotitic majoritic garnet chemistries exhibit mean pressures of 10.7 ± 2.7 GPa (n = 30) and 8.3 ± 1.6 GPa (n = 15) respectively, consistent with a sub-lithospheric origin. However, pressures defined by majoritic diamond inclusions from Jagersfontein (22.3 ± 0.8 GPa and 16.9 ± 1 GPa), Monastery (15.7 ± 7 GPa) and Kankan (15.5 ± 0.2 GPa) show that these inclusions originated from the mantle transition zone. Thus, this new single-phase method for pressure estimation has unmatched potential to map the depth of formation of garnets with majoritic chemistries that occur as diamond inclusions in all parageneses except those that include Ca silicate perovskite. The derived pressures confirm the sub-lithospheric origin of eclogitic majoritic diamond inclusions, and thus provide a more comprehensive picture of the important role of storage of oceanic lithosphere in the transition zone.  相似文献   

3.
Fluid inclusions in quartz globules and quartz veins of a 3.8-3.7 Ga old, well-preserved pillow lava breccia in the northeastern Isua Greenstone Belt (IGB) were studied using microthermometry, Raman spectrometry and SEM Cathodoluminescence Imaging. Petrographic study of the different quartz segregations showed that they were affected by variable recrystallization which controlled their fluid inclusion content. The oldest unaltered fluid inclusions found are present in vein crystals that survived dynamic and static recrystallization. These crystals contain a cogenetic, immiscible assemblage of CO2-rich (+H2O, +graphite) and brine-rich (+CO2, +halite, +carbonate) inclusions. The gas-rich inclusions have molar volumes between 44.8 and 47.5 cm3/mol, while the brine inclusions have a salinity of ∼33 eq. wt% NaCl. Modeling equilibrium immiscibility using volumetric and compositional properties of the endmember fluids indicates that fluid unmixing occurred at or near peak-metamorphic conditions of ∼460 °C and ∼4 kbar. Carbonate and graphite were precipitated cogenetically from the physically separated endmember fluids and were trapped in fluid inclusions.In most quartz crystals, however, recrystallization obliterated such early fluid inclusion assemblages and left graphite and carbonate as solid inclusions in recrystallized grains. Intragranular fluid inclusion trails in the recrystallized grains of breccia cementing and crosscutting quartz veins have CO2-rich assemblages, with distinctly different molar volumes (either between 43.7 and 47.5 cm3/mol or between 53.5 and 74.1 cm3/mol), and immiscible, halite-saturated H2O-CO2-NaCl(-other salt) inclusions. Later intergranular trails have CH4-H2 (XH2 up to ∼0.3) inclusions of variable density (ranging from 48.0 to >105.3 cm3/mol) and metastable H2O-NaCl(-other salt?) brines (∼28 eq. wt% NaCl). Finally, the youngest fluid inclusion assemblages are found in non-luminescent secondary quartz and contain low-density CH4 (molar volume > 105.33 cm3/mol) and low-salinity H2O-NaCl (0.2-3.7 eq. wt% NaCl). These successive fluid inclusion assemblages record a retrograde P-T evolution close to a geothermal gradient of ∼30 °C/km, but also indicate fluid pressure variations and the introduction of highly reducing fluids at ∼200-300 °C and 0.5-2 kbar. The quartz globules in the pillow fragments only contain sporadic CH4(+H2) and brine inclusions, corresponding with the late generations present in the cementing and crosscutting veins. We argue that due to the large extent of static recrystallization in quartz globules in the pillow breccia fragments, only these relatively late fluid inclusions have been preserved, and that they do not represent remnants of an early, seafloor-hydrothermal system as was previously proposed.Modeling the oxidation state of the fluids indicates a rock buffered system at peak-metamorphic conditions, but suggests a change towards fluid-graphite disequilibrium and a logfH2/fH2O above the Quartz-Fayalite-Magnetite buffer during retrograde evolution. Most likely, this indicates a control on redox conditions and on fluid speciation by ultramafic rocks in the IGB.Finally, this study shows that microscopic solid graphite in recrystallized metamorphic rocks from Isua can be deposited inorganically from a fluid phase, adding to the complexity of processes that formed reduced carbon in the oldest, well-preserved supracrustal rocks on Earth.  相似文献   

4.
The geochemical partitioning of bromine between hydrous haplogranitic melts, initially enriched with respect to Br and aqueous fluids, has been continuously monitored in situ during decompression. Experiments were carried out in diamond anvil cells from 890 °C to room temperature and from 1.7 GPa to room pressure, typically from high P, T conditions corresponding to total miscibility (presence of a supercritical fluid). Br contents were measured in aqueous fluids, hydrous melts and supercritical fluids. Partition coefficients of bromine were characterized at pressure and temperature between fluids, hydrous melts and/or glasses, as appropriate: DBrfluid/melt = (Br)fluid/(Br)melt, ranges from 2.18 to 9.2 ± 0.5 for conditions within the ranges 0.66-1.7 GPa, 590-890 °C; and DBrfluid/glass = (Br)fluid/(Br)glass ranges from 60 to 375 at room conditions. The results suggest that because high pressure melts and fluids are capable of accepting high concentrations of bromine, this element may be efficiently removed from the slab to the mantle source of arc magmas. We show that Br may be highly concentrated in subduction zone magmas and strongly enriched in subduction-related volcanic gases, because its mobility is strongly correlated with that of water during magma degassing. Furthermore, our experimental results suggest that a non negligible part of Br present in the subducted slab may remain in the down-going slab, being transported toward the transition zone. This indicates that the Br cycle in subduction zones is in fact divided in two related but independent parts: (1) a shallower one where recycled Br may leave the slab with a water and silica-bearing “fluid” leading to enriched arc magmas that return Br to the atmosphere. (2) A deeper cycle where Br may be recycled back to the mantle maybe to the transition zone, where it may be present in high pressure water-rich metasomatic fluids.  相似文献   

5.
Petrological and geochemical study of volatile bearing phases (fluid inclusions, amphibole, and nominally anhydrous minerals) in a spinel lherzolite xenolith suite from Quaternary lavas at Injibara (Lake Tana region, Ethiopian plateau) shows compelling evidence for metasomatism in the lithospheric mantle in a region of mantle upwelling and continental flood basalts. The xenolith suite consists of deformed (i.e., protogranular to porphyroclastic texture) Cl-rich pargasite lherzolites, metasomatized (LILE and Pb enrichment in clinopyroxene and amphibole) at T ? 1000 °C. Lherzolites contain chlorine-rich H2O-CO2 fluid inclusions, but no melt inclusions. Fluid inclusions are preserved only in orthopyroxene, while in olivine, they underwent extensive interaction with the host mineral. The metasomatic fluid composition is estimated: XCO2 = 0.64, XH2O = 0.33, XNa = 0.006, XMg = 0.006, XCl = 0.018, (salinity = 14-10 NaCl eq. wt.%, aH2O = 0.2, Cl = 4-5 mol.%). Fluid isochores correspond to trapping pressures of 1.4-1.5 GPa or 50-54 km depth (at T = 950 °C). Synchrotron sourced micro-infrared mapping (ELECTRA, Trieste) shows gradients for H2O-distribution in nominally anhydrous minerals, with considerable enrichment at grain boundaries, along intragranular microfractures, and around fluid inclusions. Total water amounts in lherzolites are variable from about 150 up to 400 ppm. Calculated trace-element pattern of metasomatic fluid phases, combined with distribution and amount of H2O in nominally anhydrous minerals, delineate a metasomatic Cl- and LILE-rich fluid phase heterogeneously distributed in the continental lithosphere. Present data suggest that Cl-rich aqueous fluids were important metasomatic agents beneath the Ethiopian plateau, locally forming a source of high water content in the peridotite, which may be easily melted. High Cl, LILE, and Pb in metasomatic fluid phases suggest the contribution of recycled altered oceanic lithosphere component in their source.  相似文献   

6.
High-pressure liquids in the MgO-SiO2-H2O (MSH) system have been investigated at 11 and 13.5 GPa and between 1000 and 1350 °C. A bulk composition more magnesian than the tie-line forsterite-H2O was employed for the study. Rocking multi-anvil experiments were combined with a diamond trap set-up. After termination of the experiments, the liquid trapped in the diamond layer was analysed by laser ablation ICP-MS using the ‘freezing’ technique. At 11 GPa, liquids coexist with one or two of phase A, clinohumite, chondrodite, and forsterite. A marked discontinuity in the evolution of liquid compositions near 1100 °C is observed at 11 GPa. A step of ∼13 wt% H2O and 13 wt% MgO is interpreted to result from overstepping the fluid-saturated solidus reaction mass balanced to 1.00(18) phase A + 1.07(4) fluid = 0.63(15) chondrodite + 1.44(2) melt. At 13.5 GPa liquids coexist with one or two of hydrous wadsleyite, clinohumite, superhydrous B, phase B, and forsterite. The discontinuity in liquid composition is no longer present, indicating that the second critical endpoint of the solidus has been overstepped. Thus, hydrous melts in the Mg-rich part of the MSH system (molar bulk Mg/Si > 2) are chemically distinct from aqueous fluids at pressure up to 11 GPa. Convergence of fluid and melt compositions along the solidus resulting in a supercritical liquid occurs between 11 and 13.5 GPa, at which pressure the entire MSH system becomes supercritical.  相似文献   

7.
Phase relations on the diopside (Di)-hedenbergite (Hd)-jadeite (Jd) system modeling mineral associations of natural eclogites were studied for the compositions (mol %) Di70Jd30, Di50Jd50, Di30Jd70, Di20Hd80, and Di40Hd10Jd50 using a toroidal anvil-with-hole (7 GPa) and a Kawai-type 6-8 multianvil apparatus (12-24 GPa). We established that Di, Hd, and Jd form complete series of solid solutions at 7 GPa, and melting temperatures of pure Di (1980 °C) and Jd (1870 °C) for that pressure were estimated experimentally. The melting temperature for the Di50Jd50 composition at 15.5 GPa is 2270 °C. The appearance of garnet is clearly dependent on initial clinopyroxene composition: at 1600 °C the first garnet crystals are observed at 13.5 GPa in the jadeite-rich part of the system (Di30Jd70), whereas diopside-rich starting material (Di70Jd30) produces garnet only above 17 GPa. The proportion of garnet increases rapidly above 18 GPa as pyroxene dissolves in the garnet structure and pyroxene-free garnetites are produced from diopside-rich starting materials. In all experiments, garnet coexists with stishovite (St). At a pressure above 18 GPa, pyroxene is completely replaced by an assemblage of majorite (Maj) + St + CaSiO3-perovskite (Ca-Pv) in Ca-rich systems, whereas Maj is associated with almost pure Jd up to a pressure of 21.5 GPa. Above ∼22 GPa, Maj, and St are associated with NaAlSiO4 with calcium ferrite structure (Cf). We established that an Hd component also spreads the range of pyroxene stability up to 20 GPa. In the Di70Jd30 system at 24 GPa an assemblage of Maj + Ca-Pv + MgSiO3 with ilmenite structure (Mg-Il) was obtained. The experimentally established correlation between Na, Si, and Al contents in Maj and pressure in Grt(Maj)-pyroxene assemblages, may be the basis for a “majorite” geobarometer. The results of our experiments are applicable to the upper mantle and the transition zone of the Earth (400-670 km), and demonstrate a wide range of transformations from eclogite to perovskite-bearing garnetite. In addition, the mineral associations obtained from the experiments allowed us to simulate parageneses of inclusions in diamonds formed under the conditions of the transition zone and the lower mantle.  相似文献   

8.
High pressure experiments have been performed in the systems Mg2SiO4-C-O-H and Mg2SiO4-K2CO3-C at 6.3 GPa and 1200 to 1600 °C using a split-sphere multi-anvil apparatus. In the Mg2SiO4-C-O-H system the composition of fluid was modeled by adding different amounts of water and stearic acid. The fO2 was controlled by the Mo-MoO2 or Fe-FeO oxygen buffers. Several experiments in the Mg2SiO4-C-O-H system and all experiments in the Mg2SiO4-K2CO3-C system have been conducted without buffering the fO2. Forsterite in the system Mg2SiO4-K2CO3-C does not reveal OH absorption bands in the IR spectra, while forsterite coexisting with carbon-bearing fluid and silicate melt at logfO2 from FMQ-2 to FMQ-5 (from 2 to 5 log units below fayalite-magnetite-quartz oxygen buffer) contains 800-1850 wt. ppm H2O. The maximum concentrations were detected at 1400 °C and FMQ-3.5. We observed an increase in the solidus temperature in the system Mg2SiO4-C-O-H from 1200 to above 1600 °C with log fO2 decreasing from FMQ-2 to FMQ-5. The increase of the solidus temperature and the broadening of the stability field of the H2O-H2-CH4 subsolidus fluid phase at 1400-1600 °C explain the high H2O storage capacity of forsterite relative to that crystallized from carbon-free, oxidized, hydrous, silicic melt. At temperatures above 1400 °C liquidus forsterite precipitated along with diamond from oxidized (FMQ-1) carbonate-silicate melt and from silicate melt dissolving the moderately reduced C-O-H fluid (from FMQ-2 to FMQ-3.5). Formation of diamond was not detected under ultra-reduced conditions (FMQ-5) at 1200-1600 °C. Olivine co-precipitating with diamond from dry carbonate-silicate or hydrous-silicic fluid/melt can provide information on the H2O contents and speciation of the diamond-forming media in the mantle. The conditions for minimum post-crystallization alteration of olivine and its hydrogen content are discussed.  相似文献   

9.
Fluid inclusions were synthesized in a piston-cylinder apparatus under mineral-buffered conditions over a range of Cl concentration (0.29 to 11.3 mol kg−1), temperature (525 to 725 °C), and pressure (0.3 to 1.7 GPa). All fluids were buffered by the mineral assemblage native copper + cuprite + talc + quartz. In situ fluid composition was determined by analysing individual fluid inclusions by LA-ICPMS and independently analysing the quench solution. The solubility data provide basic information necessary to model the high temperature behaviour of Cu in magmatic-hydrothermal systems. Copper concentrations up to ∼15 wt% were measured at 630 °C and 0.34 GPa. These results give an upper limit for Cu in natural fluids and support field-based observations of similar high Cu concentrations in fluids at near-magmatic conditions. Experimental evidence indicates that Cu+ may form neutral chloride complexes with the general stoichiometry with n up to 4, though n ? 2 is typical for the majority of the experimental conditions. At high pressure (>∼0.5 GPa) there is evidence that hydroxide species, e.g., CuOH0, become increasingly important and may predominate over copper(I)-chloride complexes. The roles of fluid mixing, cooling and decompression in ore-forming environments are also discussed.  相似文献   

10.
Nanometric solid inclusions in diamond incorporated in garnet and zircon from felsic gneiss of the Kokchetav massif, Kazakhstan, have been examined utilizing electron microscopy and focused ion beam techniques. Host garnet and zircon contain numerous pockets of multiple inclusions, which consist of 1–3 diamond crystals intergrown with quartz, phengite, phlogopite, albite, K‐feldspar, rutile, apatite, titanite, biotite, chlorite and graphite in various combinations. Recalculation of the average chemical composition of the entrapped fluid represented by multiple inclusion pockets indicates that such fluid contained a low wt% of SiO2, suggesting a relatively low‐temperature fluid rather than a melt. Transmission electron microscopy revealed that the diamond contains abundant nanocrystalline inclusions of oxides, rare carbonates and silicates. Within the 15 diamond crystals studied, abundant inclusions were found of SiO2, TiO2, FexOy, Cr2O3, ZrSiO4, and single grains of ThxOy, BaSO4, MgCO3, FeCr2O4 and a stoichiometric Fe‐rich pyroxene. The diversity of trace elements within inclusions of essentially the same stoichiometry suggests that the Kokchetav diamond crystallized from a fluid containing variable amounts of Si, Fe, Ti, Cr, Zr, Ba, Mg and Th and other minor components such as K, Na, P, S, Pb, Zn, Nb, Al, Ca, Cl. Most of the components in crystals included in diamond appear to have their origin in the subducted metasediments, but some of them probably originate from the mantle. It is concluded that Kokchetav diamond most likely crystallized from a COH‐rich multicomponent supercritical fluid at a relatively low temperature (hence the apparently low content of rock‐forming elements), and that the diversity of major and minor components suggests interactions between subducted metasediments and mantle components.  相似文献   

11.
The solubilities of the assemblages albite + paragonite + quartz and jadeite + paragonite + quartz in H2O were determined at 500 and 600 °C, 1.0-2.25 GPa, using hydrothermal piston-cylinder methods. The three minerals are isobarically and isothermally invariant in the presence of H2O, so fluid composition is uniquely determined at each pressure and temperature. A phase-bracketing approach was used to achieve accurate solubility determinations. Albite + quartz and jadeite + quartz dissolve incongruently in H2O, yielding residual paragonite which could not be retrieved and weighed. Solution composition fixed by the three-mineral assemblage at a given pressure and temperature was therefore bracketed by adding NaSi3O6.5 glass in successive experiments, until no paragonite was observed in run products. Solubilities derived from experiments bounding the appearance of paragonite thus constrain the equilibrium fluid composition. Results indicate that, at a given pressure, Na, Al, and Si concentrations are higher at 600 °C than at 500 °C. At both 500 and 600 °C, solubilities of all three elements increase with pressure in the albite stability field, to a maximum at the jadeite-albite-quartz equilibrium. In the jadeite stability field, element concentrations decline with continued pressure increase. At the solubility maximum, Na, Al, and Si concentrations are, respectively, 0.16, 0.05, and 0.48 molal at 500 °C, and 0.45, 0.27, and 1.56 molal at 600 °C. Bulk solubilities are 3.3 and 10.3 wt% oxides, respectively. Observed element concentrations are everywhere greater than those predicted from extrapolated thermodynamic data for simple ions, monomers, ion pairs, and the silica dimer. The measurements therefore require the presence of additional, polymerized Na-Al-Si-bearing species in the solutions. The excess solubility is >50% at all conditions, indicating that polymeric structures are the predominant solutes in the P-T region studied. The solubility patterns likely arise from combination of the large solid volume change associated with the albite-jadeite-quartz equilibrium and the rise in Na-Al-Si polymerization with approach to the hydrothermal melting curves of albite + quartz and jadeite + quartz. Our results indicate that polymerization of Na-Al-Si solutes is a fundamental aspect of fluid-rock interaction at high pressure. In addition, the data suggest that high-pressure metamorphic isograds can impose unexpected controls on metasomatic mass transfer, that significant metasomatic mass transfer prior to melting should be considered in migmatitic terranes, and that polymeric complexes may be an important transport agent in subduction zones.  相似文献   

12.
Synthetic hydrocarbon and aqueous inclusions have been created in the laboratory batch reactors in order to mimic inclusion formation or re-equilibration in deeply buried reservoirs. Inclusions were synthesized in quartz and calcite using pure water and Mexican dead oil, or n-tetradecane (C14H30), at a temperature and pressure of 150 °C and 1 kbar. One-phase hydrocarbon inclusions are frequently observed at standard laboratory conditions leading to homogenization temperatures between 0 and 60 °C. UV epifluorescence of Mexican oil inclusions is not uniform; blue and green-yellow colored inclusions coexist; however, no clear evidence of variations in fluid chemistry were observed. Homogenization temperatures were recorded and the maxima of Th plotted on histograms are in good agreement with expected Th in a range of 6 °C. Broad histograms were reconstructed showing non-symmetrical Th distributions over a 20 °C temperature range centered on the expected Th. This histogram broadening is due to the fragility of the fluid inclusions that were created by re-filling of pre-existing microcavities. Such Th histograms are similar to Th histograms recorded on natural samples from deeply buried carbonate reservoirs. Th values lower than those expected were measured for hydrocarbon inclusions in quartz and calcite, and for aqueous inclusions in calcite. However, the results confirm the ability of fluid inclusions containing two immiscible fluids to lead to PT reconstructions, even in overpressured environments.  相似文献   

13.
Residual pressure around mineral inclusions in diamond can provide useful information on the depth of diamond origin. Differential stress between an inclusion and host diamond arises from differences in thermal expansion and compressibility between host diamond and minerals. We determined residual pressure around mineral inclusions in a diamond from the Internationalnaya pipe, Yakutia, Russia, using the three-dimensional Raman mapping system developed recently by our group. The maximum residual pressures around the olivine and chromite inclusions were determined to be 0.69 GPa and 0.75 GPa, respectively. We proposed an advanced method for determining simultaneously pressure and temperature conditions where the mineral inclusions were trapped in the host diamond. The obtained values were 3.0 GPa and 447 °C, but these values are lower than typical P-T conditions in the mantle. Several technical possibilities for the discrepancy are discussed.  相似文献   

14.
Water speciation in rhyolitic melts with dissolved water ranging from 0.8 to 4 wt% under high pressure was investigated. Samples were heated in a piston-cylinder apparatus at 624-1027 K and 0.94-2.83 GPa for sufficient time to equilibrate hydrous species (molecular H2O and hydroxyl group, H2Om + O ? 2OH) in the melts and then quenched roughly isobarically. The concentrations of both hydrous species in the quenched glasses were measured with Fourier transform infrared (FTIR) spectroscopy. For the samples with total water content less than 2.7 wt%, the equilibrium constant (K) is independent of total H2O concentration. Incorporating samples with higher water contents, the equilibrium constant depends on total H2O content, and a regular solution model is used to describe the dependence. K changes with pressure nonmonotonically for samples with a given water content at a given temperature. The equilibrium constant does not change much from ambient pressure to 1 GPa, but it increases significantly from 1 to 3 GPa. In other words, more molecular H2O reacts to form hydroxyl groups as pressure increases from 1 GPa, which is consistent with breakage of tetrahedral aluminosilicate units due to compression of the melt induced by high pressure. The effect of 1.9 GPa (from 0.94 to 2.83 GPa) on the equilibrium constant at 873 K is equivalent to a temperature effect of 49 K (from 873 K to 922 K) at 0.94 GPa. The results can be used to evaluate the role of speciation in water diffusion, to estimate the apparent equilibrium temperature, and to infer viscosity of hydrous rhyolitic melts under high pressure.  相似文献   

15.
 An experimental technique to make real-time observations at high pressure and temperature of the diamond-forming process in candidate material of mantle fluids as a catalyst has been established for the first time. In situ X-ray diffraction experiments using synchrotron radiation have been performed upon a mixture of brucite [Mg(OH)2] and graphite as starting material. Brucite decomposes into periclase (MgO) and H2O at 3.6 GPa and 1050 °C while no periclase is formed after the decomposition of brucite at 6.2 GPa and 1150 °C, indicating that the solubility of the MgO component in H2O greatly increases with increasing pressure. The conversion of graphite to diamond in aqueous fluid has been observed at 7.7 GPa and 1835 °C. Time-dependent X-ray diffraction profiles for this transformation have been successfully obtained. Received: 17 July 2001 / Accepted: 18 February 2002  相似文献   

16.
Considerable advances in our understanding of physicochemical properties of geological fluids and their roles in many geological processes have been achieved by the use of synthetic fluid inclusions. We have developed a new method to synthesize fluid inclusions containing organic and inorganic material in fused silica capillary tubing. We have used both round (0.3 mm OD and 0.05 or 0.1 mm ID) and square cross-section tubing (0.3 × 0.3 mm with 0.05 × 0.05 mm or 0.1 × 0.1 mm cavities). For microthermometric measurements in a USGS-type heating-cooling stage, sample capsules must be less than 25 mm in length. The square-sectioned capsules have the advantage of providing images without optical distortion. However, the maximum internal pressure (P; about 100 MPa at 22 °C) and temperature (T; about 500 °C) maintained by the square-sectioned capsules are less than those held by the round-sectioned capsules (about 300 MPa at room T, and T up to 650 °C).The fused silica capsules can be applied to a wide range of problems of interest in fluid inclusion and hydrothermal research, such as creating standards for the calibration of thermocouples in heating-cooling stages and frequency shifts in Raman spectrometers. The fused silica capsules can also be used as containers for hydrothermal reactions, especially for organic samples, including individual hydrocarbons, crude oils, and gases, such as cracking of C18H38 between 350 and 400 °C, isotopic exchanges between C18H38 and D2O and between C19D40 and H2O at similar temperatures. Results of these types of studies provide information on the kinetics of oil cracking and the changes of oil composition under thermal stress.When compared with synthesis of fluid inclusions formed by healing fractures in quartz or other minerals or by overgrowth of quartz at elevated P-T conditions, the new fused-silica method has the following advantages: (1) it is simple; (2) fluid inclusions without the presence of water can be formed; (3) synthesized inclusions are large and uniform, and they are able to tolerate high internal P; (4) it is suitable for the study of organic material; and (5) redox control is possible due to high permeability of the fused silica to hydrogen.  相似文献   

17.
Along a NW-SE profile through the basement core, starting below the sedimentary unconformity and ending in the center of the nearly circular structure, the constituent quartz grains and their fluid inclusions exhibit the following characteristics:In the NW, fluid inclusions composed of CO2 and occasionally up to 50 Vol.% H2O occur along shock-induced planar elements following predominently {0 0 0 1} of coarse, largely unrecrystallized quartz grains. The planar elements are partly still open microcracks, partly they are healed, the fluid inclusions decorating the former sites of the cracks. Along these planar elements recrystallization into fine grained new quartz fabrics starts, this process increasing decidedly towards the southeast; nevertheless fluid inclusions are still retained. — Near and within the center of the dome the formerly coarse quartz grains are completely recrystallized to medium grained annealing fabrics, in which — surprizingly — the fluid inclusions have often retained their original positions relative to the old grains, so that their planar alignment now traverses the new grain boundaries. Here the enclosed fluid is pure CO2 as far as can be determined.On the basis of the homogenization temperatures of the fluid inclusions measured, and of independent petrologic geothermometry of the basement rocks near the center, the fluids trapped after the shock event had exhibited partial pressures of CO2 as high as 3 kbars at temperatures around 850° C. The derivation of these CO2-rich, post-shock fluids is either through release of older fluid inclusions from the lower crustal granulites affected by the catastrophic shattering event, or it is from a direct mantle source that might be genetically connected with the Vredefort event itself.  相似文献   

18.
The solubility of molybdenum (Mo) was determined at temperatures from 500 °C to 800 °C and 150 to 300 MPa in KCl-H2O and pure H2O solutions in cold-seal experiments. The solutions were trapped as synthetic fluid inclusions in quartz at experimental conditions, and analyzed by laser ablation inductively coupled plasma mass spectrometry (LA ICPMS).Mo solubilities of 1.6 wt% in the case of KCl-bearing aqueous solutions and up to 0.8 wt% in pure H2O were found. Mo solubility is temperature dependent, but not pressure dependent over the investigated range, and correlates positively with salinity (KCl concentration). Molar ratios of ∼1 for Mo/Cl and Mo/K are derived based on our data. In combination with results of synchrotron X-ray absorption spectroscopy of individual fluid inclusions, it is suggested that Mo-oxo-chloride complexes are present at high salinity (>20 wt% KCl) and ion pairs at moderate to low salinity (<11 wt% KCl) in KCl-H2O aqueous solutions. Similarly, in the pure H2O experiments molybdic acid is the dominant species in aqueous solution. The results of these hydrothermal Mo experiments fit with earlier studies conducted at lower temperatures and indicate that high Mo concentrations can be transported in aqueous solutions. Therefore, the Mo concentration in aqueous fluids seems not to be the limiting factor for ore formation, whereas precipitation processes and the availability of sulfur appear to be the main controlling factors in the formation of molybdenite (MoS2).  相似文献   

19.
ABSTRACT

The preservation of metastable diamond in ultrahigh-pressure metamorphic (UHPM) complexes challenges our understanding of the processes taking place during exhumation of these subduction zone complexes. The presence of diamonds in UHPM rocks implies that diamonds remained metastable during exhumation, and within thermodynamic stability of graphite for an extended period. This work studies the influence of pressure on the surface graphitization rate of diamond monocrystals in carbonate systems to understand the preservation of microdiamond during exhumation of UHP subduction complexes. Experiments were performed with 2–3 mm synthetic diamond monocrystals at 2–4 GPa in СаСО3 (1550°С) and К2СО3 (1450°С) melts using a high-pressure multi-anvil apparatus. The highest rate of surface graphitization took place at 2 GPa; diamond crystals were almost completely enveloped by a graphite coating. At 4 GPa, only octahedron-shaped pits formed on flat {111} diamond crystal faces. Our results demonstrate that the surface graphitization rate of diamonds in the presence of carbonate melts at 1450–1550°C increases with decreasing pressure. Decreased pressure alone can graphitize diamond regardless of exhumation rate. Metastable diamond inclusions survive exhumation with little or no graphitization because of excess pressure up to 2 GPa acting on them, and because inclusions are protected from interaction with C-O-H fluid.  相似文献   

20.
Precise determination of the partitioning of Mg and Fe2+ between olivine and ultramafic melt has been made at pressures from 5 to 13 GPa using a MA-8 type multi-anvil high-pressure apparatus (PREM) installed at Earthquake Research Institute, University of Tokyo. A very short rhenium capsule (<100 μm sample thickness) was adopted to minimize temperature variation within the sample container. Synthetic gels with the composition of the upper mantle peridotite were used as starting materials to promote the homogeneity. Analyses of quenched melts and coexisting olivines were made with an electron probe microanalyzer. The obtained partition coefficient, KD [=(FeO/MgO)ol/(FeO/MgO)melt], decreases from 0.35 to 0.25 with increasing pressure from 5 to 13 GPa, suggesting a negative correlation between pressure and KD above 5 GPa. Our result is consistent with a parabolic relationship between KD and degree of polymerization (NBO/T) of melts reported by previous studies at lower pressures. The negative correlation between pressure and KD suggests that olivine crystallizing in a magma ocean becomes more Mg-rich with depth and that primary magmas generated in the upper mantle become more Fe-rich with depth than previously estimated.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号