共查询到20条相似文献，搜索用时 187 毫秒
1.
针对猎雷声呐对水雷目标探测仿真问题,提出一种基于运动学信息与水下声场传播耦合分析的探测成像仿真方法。利用 Bellhop3D 声场分析方法对水下声信道信号冲击响应进行计算,结合信号复分析方法得到信号传播信道参数以构建声散射模型,以运动耦合方式综合分析声呐搭载平台位置、姿态及速度等因素对回波信号的影响,通过综合考虑上述因素来模拟目标回波信号,从而利用较为真实的等效回波信号进行图像重构。 以高频前视声呐为例,对声呐探测沉底水雷目标情况进行了仿真,结果表明,该方法能够得到高频声呐对沉底水雷目标的探测图像,与实际情况具有一致性,可为进一步构建反水雷相关模拟仿真训练系统提供参考。 相似文献
2.
3.
4.
以4处渤海海岸带黄土SEM图像为研究对象,以宏观孔隙比作为分割阈值选取的主要参考标准,基于颗粒/孔隙及裂隙分析系统(Particle/Pore and Crack Analysis System,PCAS)对海岸带黄土SEM图像进行颗粒与孔隙的划分,分别获取了颗粒及孔隙的长度、宽度、等效直径、排列方向、形状系数、周长、面积等一系列微结构参数,完成了海岸带黄土微结构的定量化研究;根据研究结果,以等效半径作为主要参考,提出了一种获取粒径或孔径小于75μm的颗粒或孔隙的分布曲线的方法,可得到与密度计法及压汞法试验结果相似性较高的累计曲线,其结果可作为密度计法及压汞法试验的补充研究方法。 相似文献
5.
根据冲量相似的要求进行船舶在冲击作用下的模型试验，并将模型试验结果与理论计算及实际试验进行了对比和分析。 相似文献
6.
评估结构耐撞性能最可靠的方法是实尺度碰撞试验,然而对于大尺度结构物的碰撞试验,因其耗资巨大而不易开展,适当开展比例模型试验可以为简化解析算法及数值仿真计算提供验证依据,也可在一定程度上评估结构的耐撞性能。但是在进行碰撞模型试验时,材料应变率的敏感性会使得缩尺模型的动态响应与实尺度结构结果出现偏差,模型试验得到的数据与实际结构的动响应不完全遵循相似关系,这就限制了相似理论在大型结构物冲击问题上的应用。本文给出了一种通过改变冲击质量来修正应变率效应的方法,不同于传统量纲分析法中选取时间、质量和长度为基本量纲,而是以冲击质量、初始冲击速度和动态应力代替,得到计及应变率效应的质量相似关系。以此为基础,将该修正方法应用于船舶-自升式海洋平台的碰撞分析中。研究结果表明,该修正方法可以有效降低由于应变率效应而造成的缩尺误差,修正后的缩尺模型在碰撞冲击载荷下的位移、碰撞力和撞击时间等动态响应参数与实尺度模型结果的一致性更好。本文研究成果可以为大型结构物冲击模型试验设计提供技术支撑。 相似文献
7.
8.
9.
激光诱导荧光(LIF)是一种主动光学探测技术,该技术已在海面未乳化溢油油种鉴别及油膜厚度评估方面取得了一定的研究成果,但乳化溢油的监测理论基础和探测方法尚未成熟。溢油乳化物的量化会直接影响溢油污染的应急处理和灾害评估,但目前对溢油乳化液溢油量的计算尚未有研究报道。本文以水包油乳化液为研究对象,基于等效思想,根据油量相等建立了水包油乳化液与油膜的荧光检测等效模型,并依据光的辐射传输机理推导出等效油膜厚度的估算公式,最后采用仿真实例对估算方法的适用性和有效性进行了验证。实验结果表明,当水包油乳化液含油率小于12×10-6,厚度小于5.98 cm时,利用所提出的等效方法能有效计算出水包油实际溢油厚度。该方法可为海面乳化溢油量的估算提供一种创新性的方法,具有良好的借鉴意义和实际应用价值。 相似文献
10.
本文以我国北黄海的烟威渔场为研究对象,采用优选因子场预报模式,对盐度的时空变化进行预报试验。文中对所采用的统计预报方法,作了简要介绍。对影响本海区盐度变化的显著因子及预报结果作了初步分析。预报试验表明:预报的总体平均绝对误差为0.27‰,预报相对误差在18％左右,预报误差小于0.5‰的站数占总站数的85％,预报趋势与实测资料基本一致。 相似文献
11.
It is well known that the accuracy of mesh-based numerical simulations of underwater explosion strongly relies on the mesh size adopted in the analyses. Although a numerical analysis of underwater explosion can be performed with enough accuracy by using considerably fine meshes, such fine meshes may lead to substantially increase in the CPU time and the usage of computer memory. Thus, how to determine a suitable mesh size in numerical simulations is always a problem confronted when attempting to study the shock wave propagation resulting from underwater explosion and the subsequent response of structures. Considering that there is currently no universally accepted method for resolving this problem, this paper aims to propose a simple method to determine the mesh size for numerical simulations of near field underwater explosion. To this end, the mesh size effects on the shock wave propagation of underwater explosion are carefully investigated for different charge weights, through which the correlation between mesh sizes and charge weights is identified. Based on the numerical study, a dimensionless variable (λ), defined as the ratio of the radius of charge to the side length of element, is introduced to be the criterion for determining the mesh size in simulations. It is interesting to note that the presented method is suitable for various charge weights. By using the proposed meshing rule, adequate balance between solution accuracy and computational efficiency can be achieved for different blast scenarios in numerical simulations of underwater explosion. 相似文献
12.
13.
Underwater Explosion Treatment of Marine Soft Foundation 总被引：11，自引：0，他引：11
Zheng Zhemin Yang Zhengsheng Jin Liu
Professor Academician of Chinese Academy of Sciences Director of Mechanics Institute of Chinese Academy of Sciences Beijing
Professor Mechanics Institute of Chinese Academy of Sciences Beijing Senior Engineer Lianyungang Harbor Construction Command Post Lianyungang Province of Jiangsu 《中国海洋工程》1991,(2)
The consolidation of soft foundation is a problem that commonly appears in harbor construction engineering on muddy coast. Introduced in this paper is the experimental study on underwater explosion treatment of soft foundation, including the regulations of explosion hollow development and medium movement, the law of similarity of densification and settlement of filled stone mass by shock wave pressure and explosion energy and their construction technologies, etc. A number of projects have been completed by applying this new technique, and the technique itself has been proved practicable. 相似文献
14.
采用LS-DYNA软件,对装药半径为0.15m、0.42m、0.55m的战斗部有、无壳体的爆炸特性进行数值模拟研究,分析了炸药在有无壳体的水下爆炸时的冲击波压力、气泡脉动压力等特性参数,对比总结了不同当量、不同装药半径及有无壳体的数值计算结果。结果表明:壳体对水下爆炸气泡脉动的影响是较为显著的。壳体厚度对气泡形成时间没有太多影响,但对气泡压力峰值影响较大。因此,研究战斗部水下爆炸威力时必须考虑壳体因素,不能简化。 相似文献
15.
Sandwich panel is commonly used in ship and marine engineering equipment, such as side structure and superstructure deck of a ship, which is of good anti-explosion performance. This paper addresses a study on the dynamic response of the U-typed sandwich panel under explosion load through the numerical simulation and theoretical methods. Based on the orthotropic plate theory, the U-typed sandwich panel is simplified and transformed into a single degree of freedom (SDOF) spring system, the equivalent motion equation of the SDOF system and the expression of triangular explosion load function are established based on the SDOF theory, and the maximum response spectrum of the SDOF system is obtained. Then, the response of the equivalent SDOF system of the U-typed sandwich panel under explosion load is analyzed, and the theoretical results match well with the numerical simulation results, which verifies the accuracy of the theoretical method proposed in this paper. The theoretical method proposed in this paper could have good engineering applications for the structural anti-explosion design, and provide a reference for the evaluation of the anti-explosion performance of ship and offshore platform structures.
相似文献16.
The shock wave and cavitation are main effects in the far-field underwater explosion, which could cause serious damage to marine structures. In this paper, the fluid mechanical behavior of blast load is described by the propagation of pressure wave. The acoustic pressure caused by far-field explosion is determined by solving the wave equation, where a strongly discontinuous axisymmetric numerical model is established with the local discontinuous Galerkin (LDG) method. The model can calculate the dynamic pressure in the fluid field and capture the high-resolution shock wave. The pressure cutoff model is employed to deal with the cavitation effect due to the reflection of the shock wave. The numerical model is verified by comparing with the analytical solution of the cavitation effect near the structure in one dimension. With the same mesh discretization, the present model shows higher precision than the results calculated by the acoustic finite element method. In addition, the propagation of shock wave in the cylindrical water column is studied. Finally, the formation, growth and collapse of the cavitation region near the free surface are simulated. The LDG model can remove the spurious oscillations behind the shock front and it’s more accurate than the results of the acoustic finite element method, in terms of capturing the sharpness of shock wave and calculating the shock and cavitation loading. And the present model can be applied to calculate the structural damage caused by shock wave in three dimensions. 相似文献
17.
港池爆炸兴波响应的计算方法 总被引：3，自引：0，他引：3
本文以爆炸兴波的ＭＡＣ法轴对称计算结果为初值，提出了对于实际港池后期兴波响应的两种计算方法。其一是基于溶器内液体驻留运动的振型叠加法，其二是爆炸早期兴波与浅水波理论的时域衔接法。进行了一千吨ＴＮＴ当量在港池内触水爆兴波的实例计算。计算表明，该方法能够合理地描述波浪演化特征，与爆炸现场的景观相吻合，可为工程设计提供简易、实用的结果。 相似文献
18.
Li Dejun Shen Guoguang Wang Rixin Cheng Hong Professor Dept. of Ocean Architecture Engineering Tianjin University Tianjin Lecturer Dept. of Ocean Architecture Engineering Tianjin University Tianjin Engineer Naval Research Centre P. L. A. of China Beijing 《中国海洋工程》1995,(4)
Using the axial symmetry results of marker and cell (MAC) method as initial value in this paper, two numerical calculating methods are presented for the late wavemaking response induced by explosion in harbour. One of the methods is the superposition method of the vibration mode based on fluid slosh in container. Another one is the joining method of the MAC results with the shallow wave theory calculation in time domain. As a practical example, it is conducted to the numerical calculation about 1000 ton TNT equivalent explosion within touch of water surface. The results show that it can be rationally described with the methods to the wavemaking progress and character. The numerical results are identical with the observed scene on the spot experiment. The methods are simple and applicable in the engineering design. 相似文献
19.
20.