共查询到20条相似文献，搜索用时 234 毫秒
1.
2.
城市高架桥合理抗震体系选择与经济性对比 总被引：1，自引：0，他引：1
探讨了基于两水准设防的城市高架桥的合理抗震设防标准与相应的结构性能目标.选取两座典型的城市高架桥结构,包括一座正线桥和一座匝道桥,分别采用延性抗震体系和减、隔震体系进行结构抗震设计.对比了不同结构抗震体系所对应的结构在各水准地震作用下具体抗震性能表现,结果表明减、隔震体系具有更优的抗震性能.在此基础上,进一步从经济性的... 相似文献
3.
4.
5.
以小雁塔结构为原型,通过试验研究建立其材料本构模型;应用IDA分析方法,建立IDA分析曲线并对小雁塔结构进行增量动力弹塑性分析,判断小雁塔结构的最不利位置,定义IDA分析的极限状态;将IDA曲线的斜率下降幅值与小雁塔结构性能水准相对应,划分小雁塔结构的性能水准指标;通过对小雁塔结构在增量地震动强度作用下地震响应分析和不同性能状态下各层的楼层位移和层间位移角的变化规律,对小雁塔结构进行了抗震性能评估;研究表明:基于IDA分析方法的小雁塔抗震性能评估可以考虑结构抗震能力的随机因素,精确地描述小雁塔结构在地震过程中的行为。该方法为类似砖石古塔结构的抗震性能评估提供了新途径。 相似文献
6.
7.
大型桥梁工程的抗震设防标准探讨 总被引：5，自引：1，他引：5
在桥梁工程的抗震设计中,抗震设防标准是必须首先解决的问题。本文探讨了桥梁工程的抗震设防标准决策问题,澄清了最低抗震设防标准和大型桥梁工程抗震设防标准的关系,并基于多级设防的抗震设计思想,探讨了强调设防水准与结构性能要求、验算指标相对应的大型桥梁工程的抗震设防标准。 相似文献
8.
参数化的装配式钢混组合结构建筑信息模型缺少结构信息描述,无法实现装配式钢混组合结构图档的修正和自主更新,对结构构件的损伤评估效果差,抗震加固性能差。据此提出用于装配式钢混组合结构抗震加固的建筑信息模型,模型框架包括建筑设计模型、结构设计模型、结构抗震加固设计和损伤评估;通过结构构件的实体定义、属性定义和关联性定义,全面描述柱、梁、板和墙等钢混组合结构构件的抗震加固性能信息;采用模糊加固评估方法获取精准的结构构建综合损伤指数,评估结构构件的加固等级,提高抗震加固性能。经实验证明,所设计模型得到的结构损伤指数与实际损伤指数的误差低于0.03,说明该模型分析装配式钢混组合结构抗震加固性能准确性较高。 相似文献
9.
10.
重要性不同的现有结构抗震加固设计地震动参数研究 总被引：1，自引：0，他引：1
提出了重要性不同的现有结构抗震加固设计基准期取值原则,给出了现有结构抗震加固设防水准的定义。基于地震危险性特征分区,利用地震动参数的危险性曲线公式对重要性不同的现有结构抗震加固设计地震动参数进行了分析。同时,为了便于工程设计人员使用,给出了现有结构设计地震动参数取值的简化方法。最后,通过算例解释了理论方法和简化计算方法中抗震加固设计地震动参数的取值方法和步骤。 相似文献
11.
Performance‐based seismic design (PBSD) can be considered as the coupling of expected levels of ground motion with desired levels of structural performance, with the objective of achieving greater control over earthquake‐induced losses. Eurocode 8 (EC8) already envisages two design levels of motion, for no collapse and damage limitation performance targets, anchored to recommended return periods of 475 and 95 years, respectively. For PBSD the earthquake actions need to be presented in ways that are appropriate to the estimation of inelastic displacements, since these provide an effective control on damage at different limit states. The adequacy of current earthquake actions in EC8 are reviewed from this perspective and areas requiring additional development are identified. The implications of these representations of the seismic loads, in terms of mapping and zonation, are discussed. The current practice of defining the loading levels on the basis of the pre‐selected return periods is challenged, and ideas are discussed for calibrating the loading‐performance levels for design on the basis of quantitative earthquake loss estimation. Copyright © 2005 John Wiley & Sons, Ltd. 相似文献
12.
现代抗震设计理论的发展过程 总被引：18，自引：0，他引：18
介绍了现代抗震设计理论的发展过程，基于性态的抗震设计理论的提出背景、发展情况及研究内容；详细介绍了基于性态的抗震设计理论的抗震设防方法；指出了基于性态的抗震设计理论与传统抗震设计理论的主要区别及特点。 相似文献
13.
随着地震工程学的发展和结构抗震设计思想和理论的进步,探讨结构在地震作用下的地震损伤破坏机理和基于结构性能的抗震设计方法(PBSD)逐渐得到了各国专家、学者的重视。而地震损伤评估的研究就是其中的一个重要方向。鉴于现阶段混凝土结构地震损伤评估方法的局限性,本文采用推广的混凝土材料的Mazars损伤模型,进而提出了一种基于常规有限元分析荷载子步的简化的地震损伤评估方法,这种方法实现简单,便于实际工程应用,同时具有一定的精细性。最后,将本文的损伤评估方法应用到一个钢筋混凝土框架的地震损伤评估实例中,分析结果与实验和实际的震害比较吻合,表明本文提出的模型和方法是有效的。 相似文献
14.
耗能梁段作为偏心支撑结构的耗能元件,在大震作用下通过弹塑性变形吸收地震能量,保护主体结构处于弹性受力状态。现行规范基于强度的设计理论,为了保证耗能梁段进入塑性或破坏,梁柱构件需要进行放大内力设计,导致截面过大,而且基于强度的设计方法很难保证结构的整体破坏状态。目前,抗震设计越来越重视基于性能的设计思想,该方法能够评估结构的弹塑性反应。对于高强钢组合偏心支撑,其中耗能梁段和支撑采用Q345钢,框架梁柱采用Q460或者Q690高强度钢材,高强钢不仅带来良好的经济效益,而且能够推广高强钢在抗震设防区的应用。利用基于性能设计方法设计了4种不同形式的高强钢组合偏心支撑钢框架,包括K形、Y形、V形和D形,考虑4层、8层、12层和16层的影响。通过Pushover分析和非线性时程分析评估该结构的抗震性能,研究结果表明:4种形式的高强钢组合偏心支撑钢框架具有类似的抗震性能,在罕遇地震作用下,几乎所有耗能梁段均参与耗能,而且层间侧移与耗能梁段转角沿高度分布较为均匀。其中:D形偏心支撑具有最大的抗侧刚度,但延性较差,而Y形偏心支撑的抗侧刚度最弱,但延性最佳。 相似文献
15.
Performance-based seismic design(PBSD) aims to assess structures at different damage states. Since damage can be directly associated to displacements, seismic design with consideration of displacement seems to be logical. In this study, simple formulae to estimate the peak floor displacement patterns of eccentrically braced frames(EBFs) at different performance levels subjected to earthquake ground motions are proposed. These formulae are applicable in a PBSD and especially in direct displacement-based design(DDBD). Parametric study is conducted on a group of 30 EBFs under a set of 15 far field and near field accelerograms which they scaled to different amplitudes to adapt various performance levels. The results of thousands of nonlinear dynamic analyses of EBFs have been post-processed by nonlinear regression analysis in order to recognize the major parameters that influence the peak displacement pattern of these frames. Results show that suggested displacement patterns have relatively good agreement with those acquired by an exact nonlinear dynamic analysis. 相似文献
16.
With the increasing emphasis of performance‐based earthquake engineering in the engineering community, several investigations have been presented outlining simplified approaches suitable for performance‐based seismic design (PBSD). Central to most of these PBSD approaches is the use of closed‐form analytical solutions to the probabilistic integral equations representing the rate of exceedance of key performance measures. Situations where such closed‐form solutions are not appropriate primarily relate to the problem of extrapolation outside of the region in which parameters of the closed‐form solution are fit. This study presents a critical review of the closed‐form solution for the annual rate of structural collapse. The closed‐form solution requires the assumptions of lognormality of the collapse fragility and power model form of the ground motion hazard, of which the latter is more significant regarding the error of the closed‐form solution. Via a parametric study, the key variables contributing to the error between the closed‐form solution and solution via numerical integration are illustrated. As these key variables cannot be easily measured, it casts doubt on the use of such closed‐form solutions in future PBSD, especially considering the simple and efficient nature of using direct numerical integration to obtain the solution. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
17.
结合跨径220米的许沟大桥结构设计,通过对全桥有限元模型动力分析和通车动载试验,对钢筋混凝土拱桥全桥动力特性进行分析,并选用50年超越概率为3%的人工地震波和E l Centro波(调整至7度)进行时程分析。根据抗震分析的结果分析控制截面地震内力,并结合通车动载试验结论,对许沟大桥抗震性能做出综合评价,对大跨径钢筋混凝土拱桥抗震设计提出合理建议。 相似文献
18.
19.
工程结构等延性地震抗力谱研究 总被引：28，自引：7，他引：21
研究结构的非弹性反应谱对改进现有的结构抗震设计、发展基于性态的抗震设计以及了解复杂地面运动特性与结构动力特性之间的关系具有重要的意义。利用大量的单自由度在强震记录作用下的弹塑性动力时程分析,对等延性地震抗力谱这一重要的非弹性反应谱进行了较为详尽的研究,给出了四类场地条件(基岩、硬土、一般土和软土)下的平均等延性地震抗力谱,总结了对工程结构的抗震设计和研究具有实际意义的规律和特征,并分析了场地条件、结构的延性系数以及周期等对等延性地震抗力谱的影响,提出了新的拟合公式,其成果可供抗震研究和设计直接应用。 相似文献
20.
Probabilistic performance‐based optimum design of seismic isolation for a California high‐speed rail prototype bridge 
下载免费PDF全文
下载免费PDF全文 Previous comparison studies on seismic isolation have demonstrated its beneficial and detrimental effects on the structural performance of high‐speed rail bridges during earthquakes. Striking a balance between these 2 competing effects requires proper tuning of the controlling design parameters in the design of the seismic isolation system. This results in a challenging problem for practical design in performance‐based engineering, particularly when the uncertainty in seismic loading needs to be explicitly accounted for. This problem can be tackled using a novel probabilistic performance‐based optimum seismic design (PPBOSD) framework, which has been previously proposed as an extension of the performance‐based earthquake engineering methodology. For this purpose, a parametric probabilistic demand hazard analysis is performed over a grid in the seismic isolator parameter space, using high‐throughput cloud‐computing resources, for a California high‐speed rail (CHSR) prototype bridge. The derived probabilistic structural demand hazard results conditional on a seismic hazard level and unconditional, i.e., accounting for all seismic hazard levels, are used to define 2 families of risk features, respectively. Various risk features are explored as functions of the key isolator parameters and are used to construct probabilistic objective and constraint functions in defining well‐posed optimization problems. These optimization problems are solved using a grid‐based, brute‐force approach as an application of the PPBOSD framework, seeking optimum seismic isolator parameters for the CHSR prototype bridge. This research shows the promising use of seismic isolation for CHSR bridges, as well as the potential of the versatile PPBOSD framework in solving probabilistic performance‐based real‐world design problems. 相似文献