共查询到20条相似文献，搜索用时 20 毫秒
1.
Based on the discrete wavenumber method, we calculate the fields of dynamic Coulomb rupture stress changes and static stress
changes caused by M6.5 earthquake in Wuding, and study their relationship with the subsequent aftershocks. The results show that the spatial
distribution patterns of the positive region of dynamic stress peak value and static stress peak value are similarly asymmetric,
which are basically identical with distribution features of aftershock. The dynamic stress peak value and the static stress
in the positive region are more than 0.1 MPa and 0.01 MPa of the triggering threshold, respectively, which indicates that
the dynamic and static stresses are helpful for the occurrence of aftershock. This suggests that both influences of dynamic
and static stresses should be considered other than only either of them when studying aftershock triggering in near field.
Foundation item: National Natural Science Foundation of China (40364001) and Joint Seismological Science Foundation of China (605014). 相似文献
2.
在离散波数法（DWN）基础上,计算了武定M6.5地震断层破裂在周围介质中产生的位移时程（位移理论地震图）和动态位移场;进行弹性动力学转换后,求得应变时程和动态应变场;最后得到了武定M6.5地震所产生的动态库仑破裂应力变化量和动态库仑破裂应力变化场,进而研究其与后续余震的关系. 结果表明,动态应力最大峰值和静态应力的正区均呈非对称性分布,两者的分布特征与余震的分布特征基本一致. 在动态应力峰值为正的确定区应力值超过了0.1 MPa触发阈值, 在静态应力值为正的确定区应力值超过了0.01 MPa触发阈值. 这说明动态应力和静态应力均有助于余震的发生. 相似文献
3.
Based on the discrete wavenumber method, we calculate the fields of dynamic Coulomb rupture stress changes and static stress changes caused by M6.5 earthquake in Wuding, and study their relationship with the subsequent aftershocks. The results show that the spatial distribution patterns of the positive region of dynamic stress peak value and static stress peak value are similarly asymmetric, which are basically identical with distribution features of aftershock. The dynamic stress peak value and the static stress in the positive region are more than 0.1 MPa and 0.01 MPa of the triggering threshold, respectively, which indicates that the dynamic and static stresses are helpful for the occurrence of aftershock. This suggests that both influences of dynamic and static stresses should be considered other than only either of them when studying aftershock triggering in near field. 相似文献
4.
本文采用离散波数法,计算了2014年于田MS7.3地震的断层破裂在近场和远场产生的库仑破裂应力变化,并结合地震活动特征,讨论了MS7.3地震对后续余震活动和远场区域小震活动的动态应力触发作用.结果表明, ① MS7.3地震产生的库仑破裂应力变化对其西南侧主体余震区的地震活动起到了抑制作用,这可能是本次MS7.3地震序列余震活动水平不高的主要原因;距主震约30 km的北东方向余震区后续地震活动受到了主震产生的动态和静态应力变化的共同触发作用,动态应力变化峰值为2.78 MPa,静态应力变化为0.80 MPa,这与该区余震较为活跃相一致;距主震约45 km的北部余震区受到动态应力触发作用,应力变化峰值为0.72 MPa. ② MS7.3地震产生的动态库仑应力变化空间分布呈非对称性,其中北东方向、北部余震分布与动态应力变化正值区存在相关性,从应力变化的角度解释了MS7.3地震的后续余震空间活动特征. ③ MS7.3地震在沙雅、伽师地区的远场接收点产生的动态应力变化峰值分别为0.09 MPa、0.1 MPa,对两个区域的小震活动具有动态触发作用. 相似文献
5.
断层间相互作用与地震触发机制的研究进展 总被引：7，自引：0，他引：7
计算地震引起的静、动应力变化量空间分布图象是国内外研究断层间相互作用与地震触发机制的两个主要方法。依据半弹性空间地震位错理论获得的静应力变化量，可以长期存在于邻近断层面上，直至下一次地震发生。因此，静应力变化量空间分布图象既被用来解释一次地震后余震活动在邻近断层上的分布规律，又被用来研究一个地区几十年至几百年地震活动过程中断层问相互作用特点和强震迁移规律。但静应力变化量随距离缩减快，空间分布与地震破裂扩展方向无关。动应力随距离衰减速度慢，量值大；在地震破裂扩展方向上，动应力变化量可以比相反方向高出一个数量级。由于动应力是伴随地震波传播而出现的，因此，动应力变化量是暂态的，作用于邻近断层面上时间有限。在分析国内外研究现状的基础上，提出我国目前在该研究领域所面临的一些问题，并说明了解决这些问题的主要技术途径。 相似文献
6.
Wu XiaoPing Hu XiongLin Michel Bouchon Huang Yong Hu JiaFu Xie ChaoDi Wang ShaoJin Hu YiLi 《中国科学D辑(英文版)》2007,50(11):1655-1662
The spatiotemporal evolution patterns of complete Coulomb stress changes caused by 1988 Ms7.6 earthquake in Lancang-Gengma,Yunnan,are calculated and studied.And the triggering problems of Ms7.2 Gengma shock occurring 13 minutes after the main shock and of Ms5.0―6.9 aftershocks within 24 days after the main shock are discussed.The results show that the spatial distribution patterns of complete Coulomb stress changes of the Ms7.6 main shock are strongly asymmetric.The areas of positive dynamic and static Coulomb stress are both coincident well with the strong aftershocks' locations.The Ms7.2 Gengma shock and most of strong aftershocks are subjected to the triggering effect of dynamic and static Coulomb stresses induced by the Ms7.6 Lancang earthquake. 相似文献
7.
印尼MS8.7地震对中国大陆3次后续中强地震的动应力触发研究 总被引：2，自引：0，他引：2
印尼8.7级地震发生后,在不到2个月时间内,在中国大陆相继发生了3次后续中强地震(2004年12月26日云南双柏MS5.1地震、2005年1月26日云南思茅MS5.1地震、2005年2月15日新疆乌什MS6.2地震),印尼地震和这3次后续地震是否存在触发关系?计算了印尼地震在3次后续地震破裂面上的动库仑应力变化和静库仑应力变化。静应力变化量小,低于一般认为的触发阈值(0.01 MPa);动应力变化峰值为10-1MPa,可能是这3次后续地震的触发因素。 相似文献
8.
在离散波数法基础上计算2008年3月21日新疆于田MS7.3地震造成的近场区域完全库仑应力变化, 分析该变化对余震发生所产生的影响, 得到了此次地震在2008年10月5日乌恰MS6.8地震震中处所产生的动态库仑破裂应力变化. 计算结果表明, 该地震近场区域库仑应力变化图像演化大概持续了60 s, 库仑应力变化对余震的触发率达到90%以上, 其中动态库仑应力变化图像更好地解释了余震的分布. 余震震中处的完全库仑应力变化计算结果表明, 其动态库仑应力变化远远大于静态库仑应力变化. 于田MS7.3地震在乌恰MS6.8地震震中处造成的最大动态库仑应力变化为0.12 MPa, 说明后者可能受到了于田MS7.3地震的动态应力触发作用, 但不显著;而静态库仑应力则对其影响很小. 相似文献
9.
埋地双排复合式管体结构在SH波作用下的动力分析 总被引：1，自引：0，他引：1
以波动理论为基础,采用复变函数法,给出了地下双排复合式管体结构在SH波作用下的解析解。分析了入射波角度、频率变化,管体埋深、内管的厚度变化等参数对管体动应力集中的影响。结果表明:复合式管体内侧的动应力集中峰值明显高于外侧;高频入射时,双排管体在给定距离之间的相互影响较大,动应力集中峰值向邻侧偏移;复合式管体内管越薄,动应力集中峰值越大;垂直入射时,动应力集中峰值受埋深的影响呈周期性变化。 相似文献
10.
This paper calculates the static stress changes generated by the Yushu M_S 7. 1 earthquake in Qinghai Province. On the basis of regional stress,we take account of the static stress change triggered by the Yushu M_S 7. 1 earthquake to find the optimally oriented fault planes,then calculate the Coulomb stress change on the optimally oriented fault plane. The results indicate that most of the aftershocks are triggered by the mainshock. The image of Coulomb stress changes is also in accord with regional earthquakes ( M_L ≥3. 0 ) distribution,but the value is lower than 0. 01MPa. In addition,this paper calculates the Coulomb stress changes in the case that the aftershock fault plane is the same as the main shock. Through comparison,we find that the image of Coulomb stress changes obtained using the "optimally oriented fault"approach is more consistent with the distribution of Yushu aftershocks and regional earthquakes. 相似文献
11.
依据速率-状态依赖性摩擦本构关系,并结合中下地壳和上地幔的黏弹性松弛效应,以震后库仑破裂应力变化和同震动态库仑破裂应力变化的计算为基础,模拟了两种应力变化对芦山地震断层的失稳发震时间的影响,研究了2008年MS8.0汶川地震与2013年MS7.0芦山地震之间的触发关系.计算得到,汶川地震在芦山地震震源断层面上产生的动态应力变化的峰值为0.127 MPa;此外,经过近5年中下地壳和上地幔的黏弹性松弛效应,芦山地震震源断层面上受到的震后应力变化值为0.025 MPa.结果表明,芦山地震的震源断层在应力积累逐渐接近临界状态的某一特定时期内,受到了汶川地震产生的动态应力变化、静态应力变化以及黏弹性松弛效应造成应力变化的共同触发作用,且动态应力的延迟触发作用可能更为显著.最后对芦山地震之后研究区域的应力变化场进行了初步探讨. 相似文献
12.
计算和研究了1976年云南龙陵Ms73、Ms74双主震产生的完全库仑破裂应力变化及其对后续震群序列的动态和静态应力触发作用.结果显示，龙陵第2主震受到了第1主震的动态和静态库仑破裂应力的触发作用.龙陵双主震的13个后续强余震中，发生在龙陵三角形块体内部的强余震，90%都受到了第1或第2主震的动态库仑破裂应力触发或静态库仑破裂应力触发作用，发生在三角形块体外部的强余震，2/3受到了第2主震的动态库仑破裂应力触发作用.从触发作用的强度和范围上看，第2主震的动态和静态库仑破裂应力触发作用都大于第1主震.就近场而言，受到龙陵双主震的动态和静态库仑破裂应力触发作用的余震数目相当，但动态库仑破裂应力的触发作用范围大于静态库仑破裂应力. 相似文献
13.
In this study, we present a new and effective method to determine the dynamic source parameters (i.e., stress drop and strength distribution). We first assume that the kinematic source parameters, i.e., the slip and rupture time distributions on the fault plane, are known from the previous source inversion studies. Then, using the seismic source representation theorem we determine the dynamic stress field on a fault plane from known kinematic parameters. Finally, we determine the strength of the fault defined as the peak stress just before the rupture. We have tested the validity of this method by using an illustrative two-dimensional analytical example. To assess the applicability of this method, we have applied it to study the 1979 Imperial Valley earthquake, and obtained consistent results with those ofMiyatake's (1992) andQuin's (1990). Compared with previous methods, this new method is simple, straightforward and accurate, and needs much less calculation. Therefore, it is expected to be useful in exploring the seismic source process. 相似文献
14.
15.
16.
Research on seismic stress triggering 总被引：6，自引：0，他引：6
Introduction What is called seismic stress triggering refers to that stress change tensor produced by previous earthquake projected on the fault plane and slip direction of subsequent earthquakes, taking into account normal stress, pore pressure and friction coefficient, and Coulomb failure stress change DCFS can be obtained. If the direction of Coulomb failure stress changes are consistent with slip direction of subsequent seismic mechanism, e.g., Coulomb failure stress changes are positive… 相似文献
17.
The Chi-Chi 1999 (ML = 7.3) earthquake generated a large number of aftershocks in the vicinity of the rupture plane. The spatial-temporal distribution of these aftershocks was recorded with high precision and thus provided a unique possibility to study whether the correlation between aftershocks and stress changes are primary due to coseismically induced stress changes (static), or whether stress relaxation processes (viscoelastic) in the lower crust contribute significantly to this correlation. From our analysis of a 3D finite element model simulating the viscoelastic stress changes due to the coseismic displacement and tectonic loading we found that the aftershocks are highly correlated with the stress variations (static and viscoelastic) caused by the main shock. Although we found that the correlation between seismicity rate changes and viscoelastic stress fluctuation is slightly better than that of the static stress changes, these differences can only be identified well in the lower crust. As a result, it is reasonable to conclude that static stress changes are the key mechanism for triggering early and shallow aftershocks in the upper crust. It is reasonable to infer that the viscoelastic relaxation in the lower crust does affect the occurrence of early aftershocks in the deep crust, but it does not significantly affect the shallow aftershocks. However, the stress changes induced from the lower crust gradually transfer to the upper crust and may influence the occurrence of aftershocks after a longer time period (>four Maxwell times). 相似文献
18.
根据地震破裂动力学, 研究了1995年7月20日河北沙城ML4.1地震序列破裂过程中, 视应力和静态应力降与动态应力降之差的变化. 结果表明, 主震的视应力约为5 MPa, 而余震的视应力平均约为0.047 MPa. 在破裂过程中, 主震的动态应力降大约为静态应力降的1.6倍,其差值约为2.7 MPa; 余震的动态应力降一致小于静态应力降,其差值平均约为-0.75 MPa. 因此,主震发生时,最终应力大于动摩擦应力,与断层突然锁住的模式相符; 余震发生时,最终应力小于动摩擦应力,与地震断层错动过头的模式相符. 因此, 主震和余震的发生过程是有差别的. 相似文献
19.
Introduction An earthquake could be caused by the failure of focal material or fast slip on the pre-existed faults under the tectonic stress based on the understanding of the occurrence process of earth-quakes in which the stress change could play a key role. Therefore to examine the stress change is beneficial to understanding the physic process actually occurring in the source region deeply. The apparent stress is defined as the product of seismic efficiency and the average stress on the foc… 相似文献
20.
Design of a model blasting system to measure peak p-wave stress 总被引：4，自引：0，他引：4
Literature review information and model scale rock blasting tests have been utilized to study the effects of some blast and fragmentation parameters on peak p-wave stress. A method for modelling scaled blasting in sandstone blocks with dimensions 515×335×215 mm3 has been presented. The dynamic and static properties of the sandstone are given. The results from model blasting experiments instrumented with pressure gauges are discussed. It is also shown there exists a useful correlation between blast, fragmentation parameters and peak p-wave stress. 相似文献