共查询到19条相似文献，搜索用时 203 毫秒
1.
阿尔金断裂带作为青藏高原北部边界 ,其走滑量和走滑速率一直为地学界所关注 ,对这样一条大陆内部巨型走滑断裂带的滑动速率进行研究 ,对于了解阿尔金断裂带左旋走滑和青藏高原北部隆升之间的耦合关系 ,具有重要意义。在阿尔金断裂带东段的疏勒河口以西 ,阿尔金断裂错断了几条规模相近的河流阶地和洪积扇 ,形成典型的走滑断层断错地貌。通过对这些典型断错地貌点的地貌观测和年代学研究 ,得到阿尔金断裂带东段石堡城以东疏勒河以西自 2 0kaBP以来的滑动速率约为 4～ 5mm/a。自 50kaBP以来 ,阿尔金断裂带东段断层平均滑动速率具有较高的时间、空间一致性 ,约为 4～ 6mm/a ,表明利用河流阶地和洪积扇位错作为断层走滑位移标志计算断层滑动速率 ,具有较高的可信度 相似文献
2.
本文采用宏观与微观相结合的方法 ,研究六盘山东麓断裂的滑动方式。结果表明 :(1)根据断层泥组构特征 ,六盘山东麓断裂可划分为北、中、南 3段 ,这与前人宏观分段结果相一致 ;(2 )北段断层泥局部强烈变形 ,发育牵引褶皱 ,吕德剪切角 (R1)介于 11°～ 2 6° ,以及伊利石无明显的优选方位组构 ,表明该段断层活动是以粘滑为主的左旋走滑运动 ;(3)中、南段断层泥普遍变形 ,吕德剪切角 (R1)一般小于 11° ,P叶理、带状褶皱和肠状构造发育 ,以及伊利石复杂的优选方位组构 ,显示该断层的活动是以蠕滑为主的多期逆冲滑动 相似文献
3.
对毛毛山断裂带断层岩进行了宏观及微观的观察和分析，特别是对断层岩中石英颗粒的形貌特征、溶蚀类型及断层岩的组分进行了研究。结果表明该断裂是一条具有多期活动的全新世活动断裂．滑动性质以粘滑为主，断裂的东段较西段更为明显。 相似文献
4.
利用水压致裂原地应力测试技术,在乌鲁木齐市区碗窑沟断裂东段、雅玛里克断裂东段和西山断裂带中、东段开展了断层附近原地应力测量研究,得到了地表浅部构造应力的大小、方向和分布特征。钻孔HFZK3位于碗窑沟断裂东段的南侧,孔深62.13m;钻孔HFZK5位于雅玛里克断裂东段的南侧,孔深30.00m;钻孔HFZK9和HFZK12都位于西山断裂带的中、东段,孔深分别为34m和54.5m。根据实测的地应力资料,断层附近最大水平主压应力方向为NE—NEE向,与区域构造应力SN—NNE向主压方向有一些差异,说明受断层活动影响,断层附近的应力状态与区域应力场明显不同。利用地应力实测资料研究了断层的活动性,在测量深度域内水平和垂直应力的关系为σH>σh>σV,该应力状态有利于逆断层活动,与地质资料反映的以逆断层活动为主基本一致。利用库仑摩擦滑动准则,摩擦强度取0.6～1.0进行分析,断层附近的现今地应力状态达到或超过产生逆断层摩擦滑动的临界值,表明测区现今构造活动以逆断层为主。研究区的3条断层不具备发生走滑断层活动的可能性,其中雅玛里克断裂东段、西山断裂带中段和东段具有发生逆断层活动的可能性,相比而言,西山断裂带中段危险性更大 相似文献
5.
首都圈跨断层形变反映的断层活动方式及其成因探讨 总被引：2，自引：0，他引：2
本文深入分析了首都圈10个跨断层形变场地的流动观测资料, 计算了断层水平滑动量。 结果表明, 首都圈断层形变反映的断层活动非常复杂。 其中: NW走向的施庄断裂左旋滑动量与时间呈线性关系, 在观测期内左旋滑动速率约为0.08 mm/a; NW走向的墙子路断裂观测期内以左旋滑动为主, 但水平滑动量较施庄断裂小; NE走向的断层在观测期内的活动方式多以左旋滑动为主, 水平滑动量随时间无明显变化规律。 在对断层活动观测结果详细分析的基础上, 利用平面弹性有限元模型对首都圈的断层活动进行了模拟研究, 认为该地区主要受张家口—渤海构造带左旋剪切的控制, 且不同走向活动断层以左旋走滑为主。 相似文献
6.
在阿尔金构造系中,阿尔金走滑断裂具有逆冲分量。文中将阿尔金构造系的逆冲活动分为西、中、东3段描述。西段从阿依耐克至车尔臣河河口,阿尔金南缘断裂具有逆冲活动迹象,在山前发育了规模较小的逆冲断层,有较新的地貌面被错动;中段从车尔臣河河口至拉配泉一带,在阿尔金山北缘发育大规模的逆冲断层,有较新的地貌面被错动;东段从拉配泉至宽滩山,逆冲断层有2种形式,此段阿尔金北缘断裂有逆冲分量,同时在阿尔金山北缘及山前冲洪积扇上发育逆冲断裂。自晚更新世中晚期以来,中段及东段逆冲速率<2mm/a。中段西部江尕拉萨依地区自16kaBP以来逆冲速率约为0.33mm/a,中部米兰桥一带自32kaBP以来的逆冲速率约为1.42mm/a。东段最大的逆冲速率在近中部的团结乡,自约5.31kaBP以来达到约1.81mm/a,向东西两端有减小的趋势,在西部柳城子自约72.36kaBP以来的逆冲速率为0.57mm/a,而东端的红柳沟自约8.99kaBP以来仅为0.05mm/a。团结乡地区约自19kaBP以来,逆冲活动有增强的趋势 相似文献
7.
通过分析高精度数字化SPOT卫星影像 ,结合野外考察和年代学测试 ,对阿尔金南缘走滑断裂带的 3个典型走滑断层断错地貌点进行了研究。在安南坝沟 ,阿尔金南缘走滑断裂带一主要分支自 (9.36± 0 .73)kaBP以来的左旋滑动速率为 (7.5± 1.7)mm/a ;在七个泉子阿尔金南缘走滑断裂带有 4条分支 ,其中 1条规模较小的断层分支自 (13 86± 1 0 7)kaBP以来的左旋滑动速率为 (2 .3±0 5 )mm/a ,由此推断七个泉子附近断裂带全新世以来的滑动速率为 (6 .9± 1.5 )～ (9.2± 2 .0 )mm/a ;约马克其断裂带自 (4 .73± 0 .38)kaBP以来的左旋滑动速率为 (10 .6± 3.0 )mm/a。综合以上各点结果 ,阿尔金南缘走滑断裂带中段 88°30′E与 93°0 5′E之间全新世以来的水平滑动速率为 7～ 11mm/a ,与最新的GPS观测结果非常接近 相似文献
8.
昌马断裂位于祁连山西段,是祁连山系列次级断裂与阿尔金断裂东段的重要构造转换断层之一,于1932年发生7.6级地震。位于昌马断裂中东段的臭水柳沟古地震探槽揭示了2次地震事件:一次为1932年昌马地震事件,另一次为(902±44)a B.P.以来发生的事件,这弥补了昌马断裂全新世晚期古地震事件缺失的现状。结合前人的研究结果可确定昌马断裂全新世至少发生7次古地震事件,推测地震复发间隔为1ka左右,部分事件未能揭示。通过探槽揭示的低角度断层、地层变形和部分断裂的地貌特征可知,受阿尔金断裂NEE向挤出的影响,昌马断裂部分段落表现出低角度的逆冲推覆活动,形成其特有的低角度走滑现象,以吸收阿尔金断裂东段的左旋位移。这也说明昌马断裂在承担阿尔金断裂与祁连山西段系列断层的构造转换中起着重要作用。 相似文献
9.
新疆南疆重镇库尔勒市及附近地区，至少分布着９条颇具规模的活动断裂。尤其斜切库尔勒市区北部的库尔勒断裂，新活动十分强烈。库尔勒断裂东段与兴地断裂西段很可能是连通的一条地震破裂段，两者均存在着丰富的多期次古地震事件的遗迹，为较稳定的断层“破裂单元”。该破裂段上现代地震活动异常平静，但发现了明显的蠕滑错开形迹。这种地震的发生与断层滑动不协调现象，说明断层运动受到了抑制，能量在某处得以积累，有酿成大震的条件和危险。 相似文献
10.
本文对青藏高原东北缘一些主要断裂（包括阿尔金、昌马、毛毛山等断裂）的断层泥首次进行了研究。在对断裂带的内部结构、围岩成分、断层泥的厚度及石英颗粒表面特征等综合分析的基础上对断裂的活动年代、活动方式及断层泥形成的深度进行了讨论。石英颗粒表面上溶蚀程度（颗粒表面的光滑程度、凹凸现象及孔洞发育情况）可划分为６种类型并且每种类型都有相应的年代。根据断裂的粘滑、蠕滑特征，对该区的各活动断裂进行了粘滑段与蠕滑段的划分。用红外光谱与稀土元素的分析结果，算得断层泥形成的深度在地壳１０ｋｍ范围内。 相似文献
11.
WANG Hu RAN Yong-kang CHEN Li-chun LIANG Ming-jian GAO Shuai-po LI Yan-bao XU Liang-xin 《地震地质》2018,40(5):967-979
The Anninghe Fault has been suggested as an important segment of the fault system along the eastern boundary of the Sichuan-Yunnan faulted block in the southeastern region of the Tibetan plateau. Reliable determination of the Late Quaternary slip rate on the Anninghe Fault is very helpful and significant for revealing deformation mechanism and kinematic characteristics of the Sichuan-Yunnan faulted block, which further helps us understand fault activity and seismic potential of the region. However, previous studies were focused mainly on the northern segment of the Anninghe Fault, while slip rate on its southern segment has been less studied. Therefore, in this paper, we chose two sites at Dashuigou and Maoheshan on the southern segment of the Anninghe Fault, and used high-resolution images of unmanned aerial vehicle (UAV)photogrammetry technology, detailed field survey, multiple paleoseismic trenching and radiocarbon dating methods to constrain slip rate on the southern fault segment of the Anninghe Fault. Specifically, we suggest that the slip rate at the Dashuigouo site is narrowly constrained to be~4.4mm/a since about 3￣￣300a￣￣BP based on a linear regression calculation method, and speculate that a slip rate of 2.6~5.2mm/a at the Maoheshan site would be highly possible, although we poorly constrained the whole deformation amount of the two branch faults at the Maoheshan site from multiple paleoseismic trenching. The data at the two sites on the southern segment show a consistent slip rate compared with that of the northern segment of the Anninghe Fault. Moreover, considering a similar paleoseismic recurrence interval on the two segments of the Anninghe Fault from previous studies, we further suggest that the fault activity and deformation pattern on the two segments of the Annignhe Fault appears to be well consistent, which is also in agreement with the regional tectonic deformation. 相似文献
12.
THE TECTONIC ACTIVITY CHARACTERISTICS OF AWANCANG FAULT IN THE LATE QUATERNARY,THE SUB-STRAND OF THE EASTERN KUNLUN FAULT 
下载免费PDF全文
下载免费PDF全文 It is well known that the slip rate of Kunlun Fault descends at the east segment, but little known about the Awancang Fault and its role in strain partitioning with Kunlun Fault. Whether the sub-strand(Awancang Fault) can rupture simultaneously with Kunlun Fault remains unknown. Based on field investigations, aerial-photo morphological analysis, topographic surveys and 14C dating of alluvial surfaces, we used displaced terrace risers to estimate geological slip rates along the Awancang Fault, which lies on the western margin of the Ruoergai Basin and the eastern edge of the Tibetan plateau, the results indicate that the slip rate is 3mm/a in the middle Holocene, similar to the reduced value of the Kunlun Fault. The fault consists of two segments with strike N50° W, located at distance about 16km, and converged to single stand to the SE direction. Our results demonstrate that the Awancang fault zone is predominantly left-lateral with a small amount of northeast-verging thrust component. The slip rates decrease sharply about 4mm/a from west to east between the intersection zone of the Awancang Fault and Kunlun Fault. Together with our previous trenching results on the Kunlun Fault, the comparison with slip rates at the Kunlun fault zone suggests that the Awancang fault zone has an important role in strain partitioning for east extension of Kunlun Fault in eastern Tibet. At the same time, the 15km long surface rupture zone of the southeast segment was found at the Awancang Fault. By dating the latest faulted geomorphologic surface, the last event may be since the 1766±54 Cal a BP. Through analysis of the trench, there are four paleoearthquake events identified recurring in situ on the Awancang Fault and the latest event is since (850±30)a BP. The slip rate of the Awancang Fault is almost equivalent to the descending value of the eastern part of the east Kunlun Fault, which can well explain the slip rate decreasing of the eastern part of the east Kunlun Fault(the Maqin-Maqu segment)and the characteristics of the structure dynamics of the eastern edge of the Tibet Plateau. The falling slip rate gradient of the eastern Kunlun Fault corresponds to the geometric characteristic. It is the Awancang Fault, the strand of the East Kunlun Fault that accommodates the strain distribution of the eastward extension of the east Kunlun Fault. This study is helpful to seismic hazard assessment and understanding the deformation mechanism in eastern Tibet. 相似文献
13.
14.
NEW EVIDENCES FOR LATE QUATERNARY ACTIVITY IN THE SOUTHERN SEGMENT OF THE YISHU-TANGTOU FAULT,THE TAN-LU FAULT ZONE,AND ITS TECTONIC IMPLICATION 下载免费PDF全文
下载免费PDF全文 CAO Jun XU Han-gang RAN Yong-kang LIANG Ming-jian LEI Sheng-xue ZHANG Peng LI Li-mei GU Qin-ping ZHAO Qi-guang 《地震地质》2017,39(2):287-303
The Tan-Lu Fault Zone(TLFZ), a well-known lithosphere fault zone in eastern China, is a boundary tectonic belt of the secondary block within the North China plate, and its seismic risk has always been a focus problem. Previous studies were primarily conducted on the eastern graben faults of the Yishu segment where there are historical earthquake records, but the faults in western graben have seldom been involved. So, there has been no agreement about the activity of the western graben fault from the previous studies. This paper focuses on the activity of the two buried faults in the western graben along the southern segment of Yishu through combination of shallow seismic reflection profile and composite drilling section exploration.
Shallow seismic reflection profile reveals that the Tangwu-Gegou Fault(F4)only affects the top surface of Suqian Formation, therefore, the fault may be an early Quaternary fault. The Yishui-Tangtou Fault(F3)has displaced the upper Pleistocene series in the shallow seismic reflection profile, suggesting that the fault may be a late Pleistocene active fault. Drilling was implemented in Caiji Town and Lingcheng Town along the Yishui-Tangtou Fault(F3)respectively, and the result shows that the latest activity time of Yishui-Tangtou Fault(F3)is between(91.2±4.4)ka and(97.0±4.8)ka, therefore, the fault belongs to late Pleistocene active fault.
Combined with the latest research on the activity of other faults along TLFZ, both faults in eastern and western graben were active during the late Pleistocene in the southern segment of the Yishu fault zone, however, only the fault in eastern graben was active in the Holocene. This phenomenon is the tectonic response to the subduction of the Pacific and Philippine Sea Plate and collision between India and Asian Plate. The two late Quaternary active faults in the Yishu segment of TLFZ are deep faults and present different forms on the surface and in near surface according to studies of deep seismic reflection profile, seismic wave function and seismic relocation. Considering the tectonic structure of the southern segment of Yishu fault zone, the relationship between deep and shallow structures, and the impact of 1668 Tancheng earthquake(M=8(1/2)), the seismogenic ability of moderate-strong earthquake along the Yishui-Tangtou Fault(F3)can't be ignored. 相似文献
15.
LATE-QUATERNARY ACTIVITY OF THE YALAHE FAULT OF THE XIANSHUIHE FAULT ZONE,EASTERN MARGIN OF THE TIBET PLATEAU 下载免费PDF全文
下载免费PDF全文 LIANG Ming-jian CHEN Li-chun RAN Yong-kang LI Yan-bao WANG Dong GAO Shuai-po HAN Ming-ming ZENG Di 《地震地质》1979,42(2):513-525
Complex geometrical structures on strike-slip faults would likely affect fault behavior such as strain accumulation and distribution, seismic rupture process, etc. The Xianshuihe Fault has been considered to be a Holocene active strike-slip fault with a high horizontal slip rate along the eastern margin of the Tibetan plateau. During the past 300 years, the Xianshuihe Fault produced 8 earthquakes with magnitude≥7 along the whole fault and showed strong activities of large earthquakes. Taking the Huiyuansi Basin as a structure boundary, the northwestern and southeastern segments of the Xianshuihe Fault show different characteristics. The northwestern segment, consisting of the Luhuo, Daofu and Qianning sections, shows a left-stepping en echelon pattern by simple fault strands. However, the southeastern segment(Huiyuansi-Kangding segment)has a complex structure and is divided into three sub-faults: the Yalahe, Selaha and Zheduotang Faults. To the south of Kangding County, the Moxi segment of the Xianshuihe Fault shows a simple structure. The previous studies suggest that the three sub-faults(the Yalahe, Selaha and Zheduotang Faults of the Huiyuansi-Kangding segment)unevenly distribute the strain of the northwestern segment of the Xianshuihe Fault. However, the disagreement of the new activity of the Yalahe Fault limits the understanding of the strain distribution model of the Huiyuansi-Kangding segment. Most scholars believed that the Yalahe Fault is a Holocene active fault. However, Zhang et al.(2017)used low-temperature thermochronology to study the cooling history of the Gongga rock mass, and suggested that the Yalahe Fault is now inactive and the latest activity of the Xianshuihe Fault has moved westward over the Selaha Fault. The Yalahe Fault is the only segment of the Xianshuihe Fault that lacks records of the strong historical earthquakes. Moreover, the Yalahe Fault is located in the alpine valley area, and the previous traffic conditions were very bad. Thus, the previous research on fault activity of the fault relied mainly on the interpretation of remote sensing, and the uncertainty was relatively large. Through remote sensing and field investigation, we found the geological and geomorphological evidence for Holocene activity of the Yalahe Fault. Moreover, we found a well-preserved seismic surface rupture zone with a length of about 10km near the Yariacuo and the co-seismic offsets of the earthquake are about 2.5~3.5m. In addition, we also advance the new active fault track of the Yalahe Fault to Yala Town near Kangding County. In Wangmu and Yala Town, we found the geological evidence for the latest fault activity that the Holocene alluvial fans were dislocated by the fault. These evidences suggest that the Yalahe Fault is a Holocene active fault, and has the seismogenic tectonic condition to produce a large earthquake, just like the Selaha and Zheduotang Faults. These also provide seismic geological evidence for the strain distribution model of the Kangding-Huiyuansi segment of the Xianshuihe Fault. 相似文献
16.
阿拉善地块南缘发育了由5条走向近EW、向西收敛、向东撒开的断裂组成的断裂束,每条断裂长度一般>100km,控制第四纪盆地呈EW向长条状展布,卫片上线性影像清晰,晚第四纪以来表现出左旋走滑活动的特点。断裂束西段的金塔南山断裂与阿尔金断裂带东段的宽滩山段趋于交会,并与文殊山构造隆起之间构成构造转换关系。分析认为金塔南山断裂以及整个阿拉善南缘断裂束是阿尔金断裂左旋运动的东延部分,断裂束在平面上“帚状”的、向东撒开的构造样式有利于走滑运动量的分解、消减和吸收,符合走滑断裂末端的构造特点。阿拉善南缘断裂束的左旋走滑活动有可能是阿尔金断裂带进一步向东扩展的结果,其时代可能发生于早更新世末—中更新世初 相似文献
17.
黄河断裂是银川盆地内展布最长、切割最深的一条深大断裂,也是银川盆地的东边界。由于其北段呈隐伏状,因此,该段的活动性和滑动速率长期未知,影响了对盆地演化和地震危险性的认识。文中选择具有石油地震勘探基础的陶乐镇为研究场点,以人工浅层地震勘探结果为依据,在黄河断裂北段布设了一排钻孔联合剖面,并对标志层进行年代测试,获得了断裂的活动时代和滑动速率。结果表明,黄河断裂北段在晚更新世末期或全新世有过活动,在（28.16±0.12）ka BP 以来的累积位移为0.96m,晚第四纪以来的平均滑动速率为0.04mm/a,该值明显低于南段灵武断层（0.24mm/a）;尽管向下切割了莫霍面,黄河断裂晚第四纪活动强度和发震能力均要低于切割相对浅的贺兰山东麓断裂;黄河断裂可能在新生代之前已经强烈活动并深切莫霍面,新生代以来,银川盆地的构造活动迁移分解到以贺兰山东麓断裂为主的多条断裂之上,地壳双层伸展模型可解释银川盆地现今深浅部构造活动间的联系。 相似文献
18.
阿尔金活动断裂带东段的滑动速率由西向东逐渐减小,而肃北是阿尔金断裂东段滑动速率的"突变点"之一。在肃北以东分布多条分支断裂,野马河北侧断裂便是其中的一条。野马河北侧断裂长约30km,总体走向NEE,该断裂沿野马河盆地北侧山前洪积扇延伸,沿断裂具有大量的左旋走滑和逆冲等地貌现象,多处冲沟出露有断层剖面。野外调查结果表明该断裂是一条左旋走滑兼逆冲断裂,错断了晚更新世时期形成的洪积扇或冲沟阶地。通过实测得到地貌面左旋、垂直错动数据,并采集样品测试相关地貌面的年龄,估算该断裂晚更新世以来的平均水平滑动速率为(1.27±0.18)mm/a,平均逆冲速率为(0.4±0.07)mm/a,该断裂分解了阿尔金断裂东段的部分运动量 相似文献
19.
Anqiu-Juxian Fault is an important fault in the Tanlu fault zone, with the largest seismic risk, the most recent activity date and the most obvious surface traces. It is also the seismogenic fault of the Tancheng M8 1/2 earthquake in 1668. There are many different views about the southern termination location of surface rupture of the Tancheng earthquake and the Holocene activity in Jiangsu segment of this fault. Research on the latest activity time of the Jiangsu segment of Anqiu-Juxian Fault, particularly the termination location of surface rupture of the Tancheng earthquake, is of great significance to the assessment of its earthquake potential and seismic risk.
Based on trench excavation on the Jiangsu segment of Anqiu-Juxian Fault, we discuss the time and characteristics of its latest activity. Multiple geological sections from southern Maling Mountain to Chonggang Mountain indicate that there was an ancient seismic event occurring in Holocene on the Jiangsu segment of Anqiu-Juxian Fault. We suggest the time of the latest seismic event is about(4.853±0.012)~(2.92±0.3)ka BP by dating results. The latest activity is characterized by thrust strike-slip faulting, with the maximum displacement of 1m. Combined with the fault rupture characteristics of each section, it is inferred that only one large-scale paleo-earthquake event occurred on the Jiangsu segment of Anqiu-Juxian Fault since the Holocene.
The upper parts of the fault are covered by horizontal sand layers, not only on the trench in the west of Chonggang mountain but also on the trench in Hehuan Road in Suqian city, which indicates that the main part of the Jiangsu segment of Anqiu-Juxian Fault was probably not the surface rupture zone of the 1668 Tancheng M8 1/2 earthquake.
In short, the Jiangsu segment of Anqiu-Juxian Fault has experienced many paleo-earthquake events since the late Pleistocene, with obvious activity during the Holocene. The seismic activities of the Jiangsu segment of Anqiu-Juxian Fault have the characteristics of large magnitude and low frequency. The Jiangsu segment of Anqiu-Juxian Fault has the deep tectonic and seismic-geological backgrounds of big earthquakes generation and should be highly valued by scientists. 相似文献