共查询到17条相似文献，搜索用时 109 毫秒
1.
海域地震对我国海洋资源开发和沿海地区的经济建设形成严重威胁,开展相关地震活动性研究的重要前提是编译我国海域及邻区的地震目录。我国常用的震级标度为面波震级(MS),而国际上最新的地震活动模型多采用矩震级(MW),因此在应用这些模型时需要拟合面波震级与矩震级之间的转换关系。本文以中国海域及邻区为研究区,收集了1988—2020年中国地震台网的面波震级和全球矩心矩张量(GCMT)项目的矩震级数据,从中提取年份、深度、经度、纬度、面波震级作为影响因子,以实际记录的矩震级值作为标记,训练BP神经网络建立以GCMT的矩震级为目标的震级转换模型。同时,使用最小二乘回归和正交回归建立线性模型作为对比。结果显示,最小二乘回归和正交回归的平均绝对误差和均方根误差比BP神经网络高40%左右。此外,BP神经网络的残差绝对值更小、分布更集中。 相似文献
2.
区域地震台网监测能力的科学评估,是进行区域地震活动性和地震危险性分析的重要基础,最小完整性震级Mc是表征台网监测能力的关键．本文以甘肃测震台网的地震观测报告和区域地震目录为基础资料,分析了甘肃及邻区地震监测能力在时、空上的分布特征,利用ldquo;震级 序号rdquo;法、ldquo;最大曲率rdquo;法(MAXC)、拟合度分别为90%和95%的拟合优度检验法(GFT)及ldquo;完整性震级范围rdquo;法（EMR）等,研究了甘肃区域地震目录最小完整性震级Mc的时、空分布特征．结果表明,1980年以来甘肃测震台网的地震监测能力得到了逐步提高,模拟记录时期和ldquo;九五rdquo;期间甘东南地区的地震监测能力明显高于祁连山地震带中西段,ldquo;十五rdquo;测震台网运行后,甘肃及邻区的地震监测能力的空间差异明显缩小．最小完整性震级Mc和监测能力的时空分布特征具有较好的一致性．随着台网的改造,Mc逐步降低,ldquo;十五rdquo;台网运行后,甘肃及邻区的ML1.8以上地震基本完整．此外,还讨论了相关技术规范对区域台网地震目录的影响,并且提出了消除该影响的科学途径和有效方法．该研究结果可为甘肃及邻区地震活动性分析和地震危险性评价等相关研究提供参考． 相似文献
3.
4.
简述了中国学者近年来在地震震级转换关系方面的研究成果与进展,比较了中国台网测定的各种震级与国外主要地震机构测定的地震标度之间的差别与各震级间的转换关系。在前人研究的基础上,统一给出了矩震级与各种震级标度之间的对应关系：在国外震级标度中,6.5≤M≤7.6时,mB≈MW;5.2≤M≤8.0时,mS≈MW;4.2≤M≤7.0时,mL≈MW;4.0≤M≤6.0时,mb≈MW。在上述震级区间,MW与mB、mb、ML和MS的偏差≤0.2。经过推导,我国常规震级标度与矩震级的之间的对应关系为：4.5≤M≤5.8时,mb≈MW;4.5≤M≤7.5时,mB≈MW;4.5≤M≤7.0时,ML≈MW;MS≈MW;MS7=MW。在上述震级区间,MW与mB、MS的偏差≤0.2,与MS7偏差为0;与ML偏差为0.22。上述结论可为地震预测及相关领域的研究提供参考。 相似文献
5.
本文将5种估计完备震级(magnitude of completeness,简记为Mc)的方法运用在三个不同模型产生的理论地震目录上,进而对比它们的优缺点.我们发现分段斜率中值分析法MBASS(The Median-based analysis of the segment slope)适用于不完备部分台网探测地震能力随震级变化快及监测能力在时间上存在不均匀性(heterogeneity)的目录中,但是要求目录包含大量的地震事件,而b值稳定法MBS(The Mcby b-value stability approach)则适合用于台网探测地震能力随震级减小衰减慢地震目录,但是比较费时.最大曲率法MAXC(The Maximum Curvature technique)和拟合优度测试法GFT(The Goodness-of-Fit Test)在使用时都低估Mc,需要加调整量.完整性震级范围法EMR(Mcfrom Entire Magnitude Range)则一般给出比较稳定、适中的Mc估计值.这种方法适用在地震数目少,且对地震丢失容忍度比较高的情况.在实践中针对不同性质的地震目录,我们希望这项研究能帮助研究者选择最合适估计完备震级Mc的方法,并指出了一些估计完备震级中应当避免的问题. 相似文献
6.
概述了2001年11月14日发生在新疆、青海交界的昆仑山口西地震震级的测定过程,分析比较了我国国家数字地震台网和美国地质调查局（USGS）国家地震信息中心（NEIC）测定的面波震级MS,以及国内外不同机构测定的该地震的矩震级MW. 结果表明, 不同的机构在测定面波震级时,由于所使用的资料不尽相同, 所使用的计算震级的公式也有所不同, 导致测定结果有一定的差别. 我国对该地震的速报结果是MS=8.1, 在正式编辑出版的《中国数字地震台网观测报告》中给出的测定结果是MS=8.2;美国地质调查局（USGS）国家地震信息中心（NEIC）测定的结果是MS=8.0. 地震发生后不久,哈佛大学（Harvard）、NEIC、东京大学地震研究所（ERI）、中国地震局分析预报中心（APCEA）、 中国地震局地球物理研究所（IGCEA）利用全球地震台网、 中国国家数字地震台网或中国数字地震台网（CDSN）的资料得出的矩震级MW分别是7.8（Harvard）, 7.7(NEIC), 7.7(ERI), 7.6(APCEA),7.5(IGCEA),测定的结果基本一致, 平均为MW=7.7. 鉴于矩震级是一个描述地震绝对大小的力学量,与传统的震级标度相比具有明显的优点,国际地震学界推荐矩震级作为优先使用的震级. 本文分析表明,昆仑山口西地震的震级（矩震级）为MW=7.7, 其面波震级MS=8.0, 是一次面波震级未饱和的地震. 相似文献
7.
使用中国地震台网资料快速测定中强地震矩震级 总被引：1，自引：1，他引：0
利用中国地震台网数字地震资料,选取国内Ms≥5.3地震波形数据,采用长周期波形拟合方法,快速计算2008年至今86个中强震的标量地震矩MO和矩震级Mw,并将Mw与GCMT的测定结果及中国地震台网中心测定的面波震级Ms进行对比.结果表明：矩震级与GCMT测定一致,与中国地震台网中心测定的面波震级关系为Mw=0.86Ms＋0.63. 相似文献
8.
基于1990-2016年中国地震台网地震目录中面波震级和全球矩心矩张量（GCMT）项目的矩震级数据，使用加权最小二乘法，给出中国地震台网面波震级与矩震级的统计关系，分析该统计关系与实际数据之间的残差分布，并将其与已有统计关系进行对比，结果表明，本研究所得统计关系式具有较好的无偏性，更能体现中国地震台网面波震级与矩震级的对应关系。 相似文献
9.
汾渭地震带区域地震目录最小完整震级分析. 总被引：1，自引：1，他引：0
利用基于G-R关系基础之上的MBS法和GFT法,对比分析了1970年以来汾渭地震带台站建设各阶段ML≥1.0的地震目录的完整性.结果表明:在基础地震台站建设阶段(1970-1977年),ML2.4-ML2.5级以上地震基本完整;在地震台站调整以及遥测台站建设阶段(1978-1997年),最小完整震级为ML2.2;在地震台站数字化阶段(1998年—至今),ML2.0-ML2.1级以上地震目录基本完整.从时间尺度上看,随着时间的推移,汾渭地震带相同起始震级所对应的拟合优度值基本呈稳定增加趋势,表明汾渭地震带的地震监测能力在逐步提高.文中采用改进的b值标准差法对b值基本稳定时所对应的震级进行了识别和评价,提高了最小完整震级识别的准确性,同时还分析了汾渭地震带最小完整震级的空间分布情况.结果表明,汾渭地震带北部Mc较中南部偏低.研究结果为汾渭地震带地震活动性研究、地震台网优化布置提供了基本依据. 相似文献
10.
11.
辽宁地区地震目录最小完整性震级研究 总被引：1，自引：0，他引：1
地震目录完整性震级MC是地震学中最为基础的研究工作之一,对完整性震级的科学评估,是进行地震活动性及其他统计相关研究的基础,同时MC也表征了台网监测能力的强弱。以1970年以来辽宁地震台网记录的目录为研究对象,利用"震级—序号"、"最大曲率"、"90%拟合度"等方法对辽宁地区不同时段的最小完整性震级进行了测定。结果显示:1975年之后,随着辽宁测震台网的加密,MC逐步降低;在1989—2007年,辽宁地区一直处于MC1.5的较低的时段;2008年的台网改造对MC产生了一定的影响达到了ML2.0,但在2012年已恢复。表明1989年之后,辽宁地区的测震资料较为完善。 相似文献
12.
山西地区不同时段地震目录最小完整性震级研究 总被引：2，自引：0，他引：2
对地震目录的最小完整性震级MC的科学评估, 是进行地震活动性和地震危险性分析的重要基础, 而最小完整性震级MC又是表征台网监测能力的关键参数。 本文据山西地震观测台网建设时间的阶段性差异, 将其分为4个时段, 以1970—2012年山西地区地震目录为基础资料, 利用震级-序号法、 最大曲率法(MAXC)、 90%和95%的拟合度GFT法, 研究了不同时段山西地区地震目录最小完整性震级MC的时序变化特征。 1970年以来随着山西测震台网的改造, MC逐步降低, 尤其是“十五”数字化台网改造后, 山西ML≥0.9地震基本完整, 表明山西地震监测能力逐步提升。 相似文献
13.
地震目录是地震监测预报、地震活动性等研究的重要资料.川滇地震科学实验场地区近几十年来积累了大量的地震记录,为实验场的地震科学研究提供了宝贵的数据.地震台网密度和仪器观测精度是逐步提高的,不同时期地震目录的完整性存在差异,因此进行现代仪器观测记录的地震目录最小完整性震级（MC,Magnitude of Completeness）分析,对正确研究和认识该地区地震活动规律及其影响因素等具有重要意义.本文采用震级—序号方法、最大曲率法（MAXC,Maximum Curvature）和拟合度检测法（GFT,Goodness-of-Fit Test）分析了川滇地震科学实验场地区1970—2018年地震目录的最小完整性震级MC值,得到了实验场地区及其内部各地震区（带）MC值的时间演化特征和空间分布特征.结果表明,实验场地区及其内部各地震区（带）MC值变化趋势大致为1970—1986年ML2.0~2.6,1987—1999年ML2.5~2.6,2000—2008年后ML1.4~2.1,2009—2018年ML1.2~1.9;实验场地区MC值的空间分布大致呈现东北部和西南部较低、西北部和东南部较高的特征,其中云南最南端的澜沧—耿马区和思普区、四川西北部的理塘—木里区以及川藏交界处的金沙江带MC值普遍较高,云南北部和四川南部的松潘—龙门山带、安宁河带、元谋区、楚雄—建水带和大理—丽江—盐源区MC值普遍较低;强震会使MC值出现突然升高、之后逐渐恢复的现象,其中MC值升高程度与震级有一定相关性,并且强震导致的MC值升高是MC值空间和时间分布不均匀的原因之一. 相似文献
14.
UNIFIED EARTHQUAKE CATALOG FOR CHINA’S SEAS AND ADJACENT REGIONS AND ITS COMPLETENESS ANALYSIS 
下载免费PDF全文
下载免费PDF全文 China’s seas and adjacent regions are affected by interactions among the Eurasian plate, the western Pacific plate, and the Philippine Sea plate. Both intraplate and plate-edge earthquakes have occurred in these regions and the seismic activities are frequent. The coastal areas of China are economically developed and densely populated. With the development and utilization of marine energy and resources along with the development of national economy, the types and quantity of construction projects in the marine and coastal areas have increased, once an earthquake happens, it will cause huge damage and loss to these areas, therefore, the earthquake-related research for these sea areas cannot be ignored and the need for study on these areas is increasingly urgent. One type of essential basic data for marine seismic research is a complete, unified earthquake catalog, which is an important database for seismotectonics, seismic zoning, earthquake prediction, earthquake prevention, and disaster reduction. Completeness and reliability analysis of an earthquake catalog is one of the fundamental research topics in seismology.
At present, four editions of earthquake catalogs have been officially published in China, as well as the earthquake catalogue compiled in the national fifth-generation earthquake parameter zoning map, these catalogs are based on historical data, seismic survey investigations, and various instrumental observations. However, these catalogs have earlier data deadlines and contain the earthquake records for only the offshore regions of China, which are extensions of coastal land. Distant sea regions, subduction zones, and adjacent sea regions have not been included in these catalogs. Secondly, there were no cross-border areas involved in the compilation of earthquake catalogs in the past. It was not required to use magnitudes measured by other countries’ seismic networks and observation agencies to develop an earthquake catalog with a uniform magnitude scale, moreover, there was no formula suitable for the conversion of magnitude scale in China’s seas areas and adjacent regions. Little research has been conducted to compile and analyze the completeness of a unified earthquake catalog for China’s seas and adjacent regions. Therefore, in this study, we compiled earthquake data from the seismic networks of China and other countries for China’s seas and adjacent regions. The earthquake-monitoring capabilities of different sea areas at different time periods were evaluated, and the temporal and spatial distribution characteristics of epicentral location accuracy for China’s seas and adjacent regions were analyzed. We used the orthogonal regression method to obtain conversion relationships between the surface wave magnitude, body wave magnitude, and moment magnitude for China’s seas and adjacent regions, and established magnitude conversion formulae between the China Seismic Network and the ML magnitude of the Taiwan Seismic Network and the MS magnitude of the Philippine Seismic Network. Finally, we developed an earthquake catalog with uniform magnitude scales for China’s seas and adjacent regions.
On the basis of the frequency-magnitude distribution obtained from the magnitude-cumulative frequency relationship (N-T) and the Gutenberg-Richter(GR)law, we conducted a completeness analysis of the unified earthquake catalog for China’s seas and adjacent regions, Then, we identified the beginning years of each magnitude interval at different focal depth ranges and different seismic zones in the earthquake catalog.
This study marks the first time that a unified earthquake catalog has been compiled for China’s seas and adjacent regions, based on the characteristics of seismicity in the surrounding sea regions, which fills the gap in the compilation of the earthquake catalogue of China’s seas and adjacent areas. The resulting earthquake catalog provides a basis for seismotectonics, seismicity study, and seismic hazard analysis for China’s seas and adjacent regions. The catalog also provides technical support for the preparation of seismic zoning maps as well as for earthquake prevention and disaster reduction in project planning and engineering construction in the sea regions. In addition, by evaluating the earthquake-monitoring capability of the seismic networks in China’s seas and adjacent regions and analyzing the completeness of the compiled unified earthquake catalog, this study provides a scientific reference to improve the earthquake-monitoring capability and optimizing the distribution of the seismic networks in these regions. 相似文献
At present, four editions of earthquake catalogs have been officially published in China, as well as the earthquake catalogue compiled in the national fifth-generation earthquake parameter zoning map, these catalogs are based on historical data, seismic survey investigations, and various instrumental observations. However, these catalogs have earlier data deadlines and contain the earthquake records for only the offshore regions of China, which are extensions of coastal land. Distant sea regions, subduction zones, and adjacent sea regions have not been included in these catalogs. Secondly, there were no cross-border areas involved in the compilation of earthquake catalogs in the past. It was not required to use magnitudes measured by other countries’ seismic networks and observation agencies to develop an earthquake catalog with a uniform magnitude scale, moreover, there was no formula suitable for the conversion of magnitude scale in China’s seas areas and adjacent regions. Little research has been conducted to compile and analyze the completeness of a unified earthquake catalog for China’s seas and adjacent regions. Therefore, in this study, we compiled earthquake data from the seismic networks of China and other countries for China’s seas and adjacent regions. The earthquake-monitoring capabilities of different sea areas at different time periods were evaluated, and the temporal and spatial distribution characteristics of epicentral location accuracy for China’s seas and adjacent regions were analyzed. We used the orthogonal regression method to obtain conversion relationships between the surface wave magnitude, body wave magnitude, and moment magnitude for China’s seas and adjacent regions, and established magnitude conversion formulae between the China Seismic Network and the ML magnitude of the Taiwan Seismic Network and the MS magnitude of the Philippine Seismic Network. Finally, we developed an earthquake catalog with uniform magnitude scales for China’s seas and adjacent regions.
On the basis of the frequency-magnitude distribution obtained from the magnitude-cumulative frequency relationship (N-T) and the Gutenberg-Richter(GR)law, we conducted a completeness analysis of the unified earthquake catalog for China’s seas and adjacent regions, Then, we identified the beginning years of each magnitude interval at different focal depth ranges and different seismic zones in the earthquake catalog.
This study marks the first time that a unified earthquake catalog has been compiled for China’s seas and adjacent regions, based on the characteristics of seismicity in the surrounding sea regions, which fills the gap in the compilation of the earthquake catalogue of China’s seas and adjacent areas. The resulting earthquake catalog provides a basis for seismotectonics, seismicity study, and seismic hazard analysis for China’s seas and adjacent regions. The catalog also provides technical support for the preparation of seismic zoning maps as well as for earthquake prevention and disaster reduction in project planning and engineering construction in the sea regions. In addition, by evaluating the earthquake-monitoring capability of the seismic networks in China’s seas and adjacent regions and analyzing the completeness of the compiled unified earthquake catalog, this study provides a scientific reference to improve the earthquake-monitoring capability and optimizing the distribution of the seismic networks in these regions. 相似文献
15.
Study on the Moment Magnitude of Small and Moderate Earthquakes Located in the Inner Mongolia Region
Based on digital seismic waveform data from Inner Mongolia Digital Seismic Network, the source spectrum parameters of 182 small and moderate earthquakes from January, 2009 to September, 2016 are derived, and the seismic moment M0 and moment magnitude MW of the earthquakes are calculated. The ML-MW relationship and the relationship between stress drop and magnitude are obtained using the linear regression method. It is clear that incorporating the moment magnitude into the seismic quick report catalog and the official earthquake catalog can enrich earthquake observation report content, thus providing better service for earthquake emergency and earthquake scientific research. 相似文献
16.
The analysis of seismic hazards relies on the statistical analysis of historical seismic data and the instrumental seismic catalog to obtain the regional earthquake recurrence interval and earthquake probability. The accuracy of analysis thus depends strongly on the completeness of the seismic data used. However, available seismic catalogs are too short or incomplete for the reliable analysis of the statistical characteristics of earthquakes. If a long-term synthetic seismic catalog can be generated using a physics-based numerical simulation, and the simulation results match the crustal deformation, seismicity, and other observations,then such a synthetic catalog helps us to further understand the characteristics of seismic activity and analyze the regional seismic hazard. In this paper, taking the northeastern Tibetan Plateau as a case study, we establish a three-dimensional visco-elastoplastic finite-element model to simulate earthquake cycles and the spatiotemporal evolution of earthquakes on the model fault system and obtain a seismic catalog on a time scale of tens of thousands of years. On the basis that the model satisfies the regional geodynamics of the northeastern Tibetan Plateau, we analyze seismicity on the northeastern Tibetan Plateau using the simulated synthetic earthquake catalog. The characteristics of earthquake recurrence at different locations and different magnitudes, and the long-term average probability of earthquake occurrence within the fault system on the northeastern Tibetan plateau are studied. The results are a reference for regional seismic hazard assessment and provide a basis for the physics-based numerical prediction of earthquakes. 相似文献
17.
为了由过去的地震活动性推测将来的地震活动性,引入了地震（震级≥m）的期望年发生率v（≥m）来描述一个地区的地震活动性．根据全球地震目录（1964-1994年）以及南加州（1932-1995年）和华北（1970-1994年）两个区域地震目录资料,以统计样本量作为目录记录时间长短的相对量度,对由不同的统计样本量计算得出的地震实际年发生率v（≥m,T,t）进行了统计分析,得到三点结沦：①在统计样本量n足够大的情况下,地震实际年发生率表现出准平稳时间过程的特征,可近似地看作地震期望年发生率,本文给出了这种近似的误差（离差系数）与统计样本量之间的定量关系;②离差系数与统计样本量之间的关系与震级无关,表现出不同震级层次的相似性;③统计样本量相同时,不同震级的地震期望年发生率之间满足logv（≥）=a－bm的关系,形式上与G－R关系相似,但它给出了由小地震的统计特征估计大地震的期望年发生率及其统计误差的方法．基于上述结论,进一步讨论了地震活动性的统计特征在地震危险性分析中的潜在应用。 相似文献