首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
Hysteretic models for sliding bearings with varying frictional force   总被引：2，自引：1，他引：1  
The friction pendulum system is a sliding seismic isolator with self‐centering capabilities. Under severe earthquakes, the movement may be excessive enough to cause the pendulum to hit the side rim of the isolator, which is provided to restrain the sliding. The biaxial behavior of a single friction pendulum, in which the slider contacts the restrainer, is developed using a smooth hysteretic model with nonlinear kinematic hardening. This model is extended to simulate the biaxial response of double and triple friction pendulums with multiple sliding surfaces. The model of a triple friction pendulum is based on the interaction between four sliding interfaces, which in turn is dependent upon the force and displacement conditions prevailing at these interfaces. Each of these surfaces are modeled as nonlinear biaxial springs suitable for a single friction pendulum, using the yield surface, based on the principles of the classical theory of plasticity, and amended for varying frictional yield force, due to variation in vertical load and/or velocity‐dependent friction coefficient. The participation of the nonlinear springs is governed by stick‐slip conditions, dictated by equilibrium and kinematics. The model can simulate the overall force‐deformation behavior, track the displacements in individual sliding surfaces, and account for the ultimate condition when the sliders are in contact with their restrainers. The results of this model are verified by comparison to theoretical calculations and to experiments. The model has been implemented in programs IDARC2D and 3D‐BASIS, and the analytical results are compared with shake table experimental results. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

2.
A gravity foundation submerged in the water is subject to the buoyancy force and is hence vulnerable to sliding at the base when it is subjected to a large lateral load. The effects of sliding on the earthquake response were investigated for this type of foundation on soft rock, considering the friction characteristics at the contact between concrete and soft rock. Shake table tests were conducted to observe the behavior of a submerged foundation on soft rock which slid during the excitation. Large-scale cyclic direct shear tests were conducted to examine in detail the friction characteristics at the contact between the concrete and soft rocks. Based on the results obtained in shake table and cyclic shear tests, a numerical model was established for simulating the earthquake response behavior of a submerged gravity foundation on soft rock. Numerical parametric studies were conducted by using this model and selected earthquake ground motion records. Various important features were observed in the earthquake response of this foundation.  相似文献   

3.
This paper leverages concepts from an existing model to simulate the planar response of a smart device subjected to friction forces induced by an underlying moving plane. An interpolation technique is used to enhance detection of transition points (between sticking and sliding states), which must be accurately identified because of the frequency of their occurrence during seismic motion. The behavior of a smart device on an unconstrained table or desk, which is itself on a moving floor, is introduced and discussed. After validation of the results using experimental data, the revised model is used to study the sliding potential of smart devices on a surface during strong seismic events. Sliding spectra associated with selected ground motions are presented and extended to incorporate the effect of vertical accelerations with the purpose of assessing their influence. It is shown that vertical accelerations have a minimal effect on the sliding behavior of smart devices and that a “probability of exceeding the slip limit” curve can be developed to relate the probability of sticking to a demand parameter that represents the ground motion.  相似文献   

4.
Damage or collapse of buildings vulnerable to seismic forces may cause human casualties, and seismic upgrading of such structures is a practical solution to this deficiency. The study presented here proposes a simple approach to prevent structural collapse by separating the superstructure from its foundation to let the superstructure slide during extreme ground shaking. The sliding mechanism contributes to cap the horizontal force exerted on the superstructure. In such approach, the key is to maintain the friction force between the superstructure and the foundation sufficiently low and stable. This research proposes to realize a controlled sliding mechanism, which acts as a structural fuse, by means of carbon powder lubrication at the bases of the structure's columns. The fundamental behaviour of the proposed structural system, named the base shear capping building, is investigated by shaking table tests and numerical simulation. Both experimental and numerical results showed that graphite lubrication is an efficient and robust lubrication material, maintaining the friction coefficient between the steel column bases and mortar foundation at around 0.16. The sliding at the bases significantly reduced the acceleration transmitted to the superstructure, keeping the base shear coefficient not greater than about 0.40. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

5.
This paper focuses on slab vibration and a horizontal‐vertical coupling effect observed in a full‐scale 5‐story moment frame test bed building in 2 configurations: isolated with a hybrid combination of lead‐rubber bearings and cross‐linear (rolling) bearings, and fixed at the base. Median peak slab vibrations were amplified—relative to the peak vertical shake table accelerations—by factors ranging from 2 at the second floor to 7 at the roof, and horizontal floor accelerations were significantly amplified during 3D (combined horizontal and vertical) motions compared with 2D (horizontal only) motions of comparable input intensity. The experimentally observed slab accelerations and the horizontal‐vertical coupling effect were simulated through a 3D model of the specimen using standard software and modeling assumptions. The floor system was modeled with frame elements for beams/girders and shell elements for floor slabs; the insertion point method with end joint offsets was used to represent the floor system composite behavior, and floor mass was finely distributed through element discretization. The coupling behavior was partially attributed to the asymmetry of the building that was intensified by asymmetrically configured supplemental mass at the roof. Horizontal‐vertical coupled modes were identified through modal analysis and verified with evaluation of floor spectral peaks.  相似文献   

6.
The Asymmetric Friction Connection (AFC) remains elastic during moderate earthquake shaking but slides and dissipates energy through friction during severe earthquake shaking. The sliding friction forces developed are dependent on the clamping force in the connection which is provided by fully tensioned bolts which pass through slotted holes. During sliding these bolts are subject to moment and shear as well as axial force. Moment–shear–axial force interaction reduces the clamping axial force on the sliding interfaces thereby reducing the sliding shear resistance (Vss). Two methods to evaluate the moment–shear–axial force interaction have been proposed so that the sliding shear strength can be quantified, but as yet, these methods are not robust. This paper describes the results of 60 tests undertaken to improve the two methods, namely the moment–shear–axial force bolt model and the effective coefficient of friction method, for AFCs with high hardness steel shims. The bolts were M16 to M30 bolts and cleat thicknesses ranged from 12 mm to 25 mm. It is shown that either method may be used in design as the results obtained are similar. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

7.
为研究高强钢绞线网-聚合物砂浆加固混凝土板的抗爆能力,用混凝土HJC动力本构模型,建立了混凝土板、炸药及考虑空气介质影响的流固耦合有限元计算模型。用动力分析软件ANSYS/LS-DYNA,对在爆炸荷载作用下加固前、后混凝土板的破坏形态和抗爆性能进行了数值分析。研究结果表明：混凝土板用高强钢绞线网-聚合物砂浆加固后,抗爆炸冲击能力明显提高。当小药量爆炸时,板顶、板底同时加固的效果明显优于板底单一加固;当药量较大时,板顶、板底同时加固的效果与板底单一加固相差不大。  相似文献   

8.
2008年汶川地震中江油市太白公园曲径桥上的石雕发生转动破坏现象,本文对这一转动现象进行了振动台模拟试验。模拟试验结果表明:① 在振动台三向加载1.5倍的汶川地震江油台记录的平动加速度后,模型的转动情况与实际观测的石雕转动情况比较一致;② 石雕的转动与石雕的非对称性、地震动输入角度和地震动的竖向作用有关;③ 加载竖向地震动作用后,石雕模型会发生摇摆现象,说明竖向地震动是造成模型扭转现象的重要原因,这也说明在分析相似震害现象时竖向地震动作用不可忽视。   相似文献   

9.
This paper investigates the dynamic characteristics and seismic behavior of prefabricated steel stairs in a full‐scale five‐story building shake table test program. The test building was subjected to a suite of earthquake input motions and low‐amplitude white noise base excitations first, while the building was isolated at its base, and subsequently while it was fixed to the shake table platen. This paper presents the modal characteristics of the stairs identified using the data recorded from white noise base excitation tests as well as the physical and measured responses of the stairs from the earthquake tests. The observed damage to the stairs is categorized into three distinct damage states and is correlated with the interstory drift demands of the building. These shake table tests highlight the seismic vulnerability of modern designed stair systems and in particular identifies as a key research need the importance of improving the deformability of flight‐to‐building connections. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

10.
A full‐scale 5‐story steel moment frame building was subjected to a series of earthquake excitations using the E‐Defense shake table in August, 2011. For one of the test configurations, the building was seismically isolated by a hybrid system of lead‐rubber bearings and low friction roller bearings known as cross‐linear bearings, and was designed for a very rare 100 000‐year return period earthquake at a Central and Eastern US soil site. The building was subject to 15 trials including sinusoidal input, recorded motions and simulated earthquakes, 2D and 3D input, and a range of intensities including some beyond the design basis level. The experimental program was one of the first system‐level full‐scale validations of seismic isolation and the first known full‐scale experiment of a hybrid isolation system incorporating lead‐rubber and low friction bearings. Stable response of the hybrid isolation system was demonstrated at displacement demands up to 550 mm and shear strain in excess of 200%. Torsional amplifications were within the new factor stipulated by the code provisions. Axial force was observed to transfer from the lead‐rubber bearings to the cross‐linear bearings at large displacements, and the force transfer at large displacements exceeded that predicted by basic calculations. The force transfer occurred primarily because of the flexural rigidity of the base diaphragm and the larger vertical stiffness of the cross‐linear bearings relative to the lead‐rubber bearings.  相似文献   

11.
A novel low-cost friction sliding system for bidirectional excitation is developed to improve the seismic performance of reinforced concrete (RC) bridge piers. The sliding system is a spherical prototype developed by combining a central flat surface with an inclined spherical segment, characterized by stable oscillation and a large reduction in response accelerations on the flat surface. The inclined part provides a restoring force that limits the residual displacements of the system. Conventional steel and concrete are employed to construct a flat-inclined spherical surface atop an RC pier. The seismic forces are dissipated through the frictions generated during the sliding movements; hence, the seismic resilience of bridges can be ensured with a low-cost design solution. The proposed system is fabricated utilizing a mold created by a three-dimensional printer, which facilitates the use of conventional concrete to construct spherical shapes. The concrete surface is lubricated with a resin material to prevent abrasion from multiple input ground motions. To demonstrate the effectiveness of the system, bidirectional shaking table tests are conducted in the longitudinal and transverse directions of a scaled bridge model. The effect of the inclination angle and the flat surface size is investigated. The results demonstrate a large decrease in response acceleration when the system exhibits circular sliding displacement. Furthermore, the inclination angle that generates the smallest residual displacement is identified experimentally.  相似文献   

12.
Base isolation is an effective way to reduce earthquake energy transfer from ground to structure, but existing seismic isolation systems are not very suitable for rural buildings for some reasons. A new steel–asphalt composite layer for the seismic base isolation of housing units is present in this paper. Its dynamic characteristics and isolation effect are studied by shake table tests of two full-scale specimens. Different earthquake waves with different peak ground accelerations (PGA, from 0.1 g to 0.4 g) are input. Test results show that the isolation layer could efficiently reduce the input acceleration. Moreover, as the PGA increase, the isolation layer shows good function of the displacement limit.  相似文献   

13.
An experimental study to assess the frictional characteristics of Teflon–steel interfaces under dynamic conditions is described. Tests were conducted on unfilled Teflon sliding on stainless steel polished to a surface roughness of less than 0.05 μm CLA. The bearing pressure was 1.38, 3.45 and 6.9 N/mm2, the frequency of sliding was 0.5 and 1 Hz and the acceleration of excitation, imposed by a small shaking table, was between 0.05 and 0.5g. It was found that friction drops with decreases in the acceleration of excitation and drops with increases in the bearing pressure. It was observed that Teflon–steel interfaces have the tendency to slide continuously regardless of the value of acceleration. This is very important in base isolation applications because it prevents high frequency input to the structure.  相似文献   

14.
This paper presents results of a comprehensive experimental program on the seismic response of full‐scale freestanding laboratory equipment. First, quasi‐static experiments are conducted to examine the mechanical behavior of the contact interface between the laboratory equipment and floors. Based on the experimental results, the response analysis that follows adopts two idealized contact friction models: the elastoplastic model and the classical Coulomb friction model. Subsequently, the paper presents shake table test results of full‐scale freestanding equipment subjected to ground and floor motions of hazard levels with corresponding displacements that can be accommodated by the shake table at the UC Berkeley Earthquake Engineering Research Center. For the equipment tested, although some rocking is observed, sliding is the predominant mode of response, with sliding displacements reaching up to 60 cm. Numerical simulations with the proposed models are performed. Finally, the paper identifies a physically motivated intensity measure and the associated engineering demand parameter with the help of dimensional analysis and presents ready‐to‐use fragility curves. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

15.
Cyclic loading tests were performed on three one‐storey steel frames and four three‐storey concrete‐filled tube (CFT) moment frames reinforced with a new type of earthquake‐resisting element consisting of a steel plate shear wall with vertical slits. In this shear wall system, the steel plate segments between the slits behave as a series of flexural links, which provide fairly ductile response without the need for heavy stiffening of the wall. The steel shear walls and the moment frames behaved in a ductile manner up to more than 4% drift without abrupt strength degradation or loss of axial resistance. Results of these tests and complementary analysis provide a basis for an equivalent brace model to be employed in commercially available frame analysis programs. Test and analytical results suggest that the horizontal force is carried by the bolts in the middle portion of the wall–frame connection, while the vertical forces coupled with the moment in the connection are resisted by the bolts in the edge portion of the connection, for which the friction bolts in the connection should be designed. When sufficient transverse stiffening is provided, full plastic strength and non‐degrading hysteretic behaviour can be achieved for this new type of shear wall. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

16.
Previous studies have suggested that rocking vibration accompanied by uplift motion might reduce the seismic damage to buildings subjected to severe earthquake motions. This paper reports on the use of shaking table tests and numerical analyses to evaluate and compare the seismic response of base‐plate‐yielding rocking systems with columns allowed to uplift with that of fixed‐base systems. The study is performed using half‐scale three‐storey, 1 × 2 bay braced steel frames with a total height of 5.3 m. Base plates that yield due to column tension were installed at the base of each column. Two types of base plates with different thicknesses are investigated. The earthquake ground motion used for the tests and analyses is the record of the 1940 El Centro NS component with the time scale shortened by a factor of 1/√2. The maximum input acceleration is scaled to examine the structural response at various earthquake intensities. The column base shears in the rocking frames with column uplift are reduced by up to 52% as compared to the fixed‐base frames. Conversely, the maximum roof displacements of the fixed and rocking frames are about the same. It is also noted that the effect of the vertical impact on the column associated with touchdown of the base plate is small because the difference in tensile and compressive forces is primarily due to the self‐limiting tensile force in the column caused by yielding of the base plate. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

17.
本文在已有摩擦阻尼器的基础上,设计可应用于装配式剪力墙竖向接缝的阻尼器。通过改变摩擦材料、高强螺栓预紧力等参数,对阻尼器工作性能参数（起滑力、起滑位移、等效初始刚度等）进行对比分析。研究结果表明,当摩擦材料为黄铜板、铝板及碳纤维板时,2个受力方向的起滑力相差不大,而当摩擦材料为橡胶板时,由于橡胶自身强度较低,2个受力方向的起滑力差异较大,工作性能相对较差;4种材料起滑位移及等效初始刚度在不同预紧力下按照一定规律变化,表现出较好的工作性能。在实际应用中,应设置碟形垫片以保证预紧力的稳定,使阻尼器工作性能良好。  相似文献   

18.
A new floor connecting system developed for low‐damage seismic‐resistant building structures is described herein. The system, termed Inertial Force‐Limiting Floor Anchorage System (IFAS), is intended to limit the lateral forces in buildings during an earthquake. This objective is accomplished by providing limited‐strength deformable connections between the floor system and the primary elements of the lateral force‐resisting system. The connections transform the seismic demands from inertial forces into relative displacements between the floors and lateral force‐resisting system. This paper presents the IFAS performance in a shake‐table testing program that provides a direct comparison with an equivalent conventional rigidly anchored‐floor structure. The test structure is a half‐scale, 4‐story reinforced concrete flat‐plate shear wall structure. Precast hybrid rocking walls and special precast columns were used for test repeatability in a 22‐input strong ground‐motion sequence. The structure was purposely designed with an eccentric wall layout to examine the performance of the system in coupled translational‐torsional response. The test results indicated a seismic demand reduction in the lateral force‐resisting system of the IFAS structure relative to the conventional structure, including reduced shear wall base rotation, shear wall and column inter‐story drift, and, in some cases, floor accelerations. These results indicate the potential for the IFAS to minimize damage to the primary structural and non‐structural components during earthquakes.  相似文献   

19.
This paper investigates the seismic performance of a functional traction elevator as part of a full‐scale five‐story building shake table test program. The test building was subjected to a suite of earthquake input motions of increasing intensity, first while the building was isolated at its base and subsequently while it was fixed to the shake table platen. In addition, low‐amplitude white noise base excitation tests were conducted while the elevator system was placed in three different configurations, namely, by varying the vertical location of its cabin and counterweight, to study the acceleration amplifications of the elevator components due to dynamic excitations. During the earthquake tests, detailed observation of the physical damage and operability of the elevator as well as its measured response are reported. Although the cabin and counterweight sustained large accelerations because of impact during these tests, the use of well‐restrained guide shoes demonstrated its effectiveness in preventing the cabin and counterweight from derailment during high‐intensity earthquake shaking. However, differential displacements induced by the building imposed undesirable distortion of the elevator components and their surrounding support structure, which caused damage and inoperability of the elevator doors. It is recommended that these aspects be explicitly considered in elevator seismic design. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

20.
滑移摩擦隔震系统在多向地面运动作用下的试验研究   总被引：7，自引：2，他引：7  
基础隔震通常只考虑隔离水平地面运动，而对竖向地面运动的影响注意不够，本文进行了滑移摩擦隔震系统的振动台房屋模型试验，研究多向地面运动输入时上部结构反应和隔震系统的性能，试验中分别对模型输入了不同方向的地震动，其中包括水平单向、水平双向、水平和竖向及三向地震动输入，对试验结果进行了分析比较，结果表明竖向地震动输入对上部结构的水平地震反应有显著影响，同时在橡胶隔震支座中产生了竖向拉力。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号