首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
This paper presents an analytical method for establishing a stage–fall–discharge rating using hydraulic performance graphs (HPG). The rating curves derived from the HPG are used as the basis to establish the functional relation of stage, fall and discharge through regression analysis following the USGS procedure. In doing so, the conventional trial‐and‐error process can be avoided and the associated uncertainties involved may be reduced. For illustration, the proposed analytical method is applied to establish stage–fall–discharge relations for the Keelung River in northern Taiwan to examine its accuracy and applicability in an actual river. Based on the data extracted from the HPG for the Keelung River, one can establish a stage–fall–discharge relation that is more accurate than the one obtained by the conventionally used relation. Furthermore, the discharges obtained from the proposed rating method are verified through backwater analysis for measured high water level events. The results indicate that the analytical stage–fall–discharge rating method is capable of circumventing the shortcomings of those based on single‐station data and, consequently, enhancing the reliability of flood estimation and forecasting. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

2.
T.‐L. Tsai 《水文研究》2015,29(22):4779-4793
Accurate and practical calculation of aquitard consolidation is required for a reliable analysis of land subsidence caused by groundwater overexploitation in a multilayered aquifer system because aquitards are generally more compressible than aquifers are. This study proposes a coupled one‐dimensional viscoelastic–plastic consolidation model that considers the combined effect of changes in soil parameters and body force to simulate aquitard consolidation caused by hydraulic head variations in neighbouring aquifers. The proposed model uses variable total stress and simultaneously solves hydraulic head and vertical soil displacement. The constitutive relation based on the Voigt model with different elastic moduli of the spring in normally consolidated and overconsolidated soils is used to describe the viscoelastic–plastic deformation mechanism of aquitards. In addition, the proposed model considers the combined effect of variations in hydraulic conductivity, elastic moduli, and body force on the calculation of aquitard consolidation. Three hypothetical scenarios with various hydraulic head variations in aquifers are used to examine the coupled one‐dimensional viscoelastic–plastic consolidation model. The results show that neglecting plasticity and viscosity of soil causes aquitard consolidation to be respectively underestimated and overestimated. In addition, ignoring body force variation underestimates aquitard consolidation, whereas neglecting soil parameters variation overestimates aquitard consolidation. Two real case scenarios are also studied to further demonstrate the applicability of the coupled one‐dimensional viscoelastic–plastic consolidation model. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

3.
Discharge time series' are one of the core data sets used in hydrological investigations. Errors in the data mainly occur through uncertainty in gauging (measurement uncertainty) and uncertainty in determination of the stage–discharge relationship (rating curve uncertainty). Thirty‐six flow gauges from the Namoi River catchment, Australia, were examined to explore how rating curve uncertainty affects gauge reliability and uncertainty of observed flow records. The analysis focused on the deviations in gaugings from the rating curves because standard (statistical) uncertainty methods could not be applied. Deviations of greater/lesser than 10% were considered significant to allow for a measurement uncertainty threshold of 10%, determined from quality coding of gaugings and operational procedures. The deviations in gaugings were compared against various factors to examine trends and identify major controls, including stage height, date, month, rating table, gauging frequency and quality, catchment area and type of control. The analysis gave important insights into data quality and the reliability of each gauge, which had previously not been recognized. These included identification of more/less reliable periods of record, which varied widely between gauges, and identification of more/less reliable parts of the hydrograph. Most gauges showed significant deviations at low stages, affecting the determination of low flows. This was independent of the type of gauge control, with many gauges experiencing problems in the stability of the rating curve, likely as a result of sediment flux. The deviations in gaugings also have widespread application in modelling, for example, informing suitable calibration periods and defining error distributions. This paper demonstrates the value and importance of undertaking qualitative analyses of observed records. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

4.
The scenario assumed for this study was that of a region with a complete or first‐order weather station surrounded by a network of second‐order stations, where only monthly air temperature data were available. The objective was to evaluate procedures to estimate the monthly α parameter of the Priestley–Taylor equation in the second‐order stations by adjusting and extrapolating α values determined at the first‐order station. These procedures were applied in two climatic zones of north‐east Spain with semi‐arid continental and semi‐arid Mediterranean climates, respectively. Procedure A assumed α to be constant over each zone for each month (direct extrapolation). Procedure B accounted for differences in vapour pressure deficit and available energy for evapotranspiration between the first‐ and second‐order stations. Procedure C was based on equating the Penman–Monteith (P–M) and Priestley–Taylor (P–T) equations on a monthly basis to solve for α. Methods to estimate monthly mean vapour pressure deficit, net radiation and wind speed were developed and evaluated. A total of 11 automated first‐order weather stations with a minimum period of record of 6 years (ranging from 6 to 10 years) were used for this study. Six of these stations were located in the continental zone and five in the Mediterranean zone. One station in each zone was assumed to be first‐order whereas the remainder were taken as second‐order stations. Monthly α parameters were calibrated using P–M reference crop evapotranspiration (ET0) values, calculated hourly and integrated for monthly periods, which were taken as ‘true’ values of ET0. For the extrapolation of monthly α parameters, procedure A was found to perform slightly better than procedure B in the Mediterranean zone. The opposite was true in the continental zone. Procedure C had the worst performance owing to the non‐linearity of the P–M equation and errors in the estimation of monthly available energy, vapour pressure deficit and wind speed. Procedures A and B are simpler and performed better. Overall, monthly P–T ET0 estimates using extrapolated α parameters and Rn?G values were in a reasonable agreement with P–M ET0 calculated on an hourly basis and integrated for monthly periods. The methods presented for the spatial extrapolation of monthly available energy, vapour pressure deficit and wind speed from first‐ to second‐order stations could be useful for other applications. Copyright © 2001 John Wiley & Sons, Ltd.  相似文献   

5.
In order to quantify total error affecting hydrological models and predictions, we must explicitly recognize errors in input data, model structure, model parameters and validation data. This paper tackles the last of these: errors in discharge measurements used to calibrate a rainfall‐runoff model, caused by stage–discharge rating‐curve uncertainty. This uncertainty may be due to several combined sources, including errors in stage and velocity measurements during individual gaugings, assumptions regarding a particular form of stage–discharge relationship, extrapolation of the stage–discharge relationship beyond the maximum gauging, and cross‐section change due to vegetation growth and/or bed movement. A methodology is presented to systematically assess and quantify the uncertainty in discharge measurements due to all of these sources. For a given stage measurement, a complete PDF of true discharge is estimated. Consequently, new model calibration techniques can be introduced to explicitly account for the discharge error distribution. The method is demonstrated for a gravel‐bed river in New Zealand, where all the above uncertainty sources can be identified, including significant uncertainty in cross‐section form due to scour and re‐deposition of sediment. Results show that rigorous consideration of uncertainty in flow data results in significant improvement of the model's ability to predict the observed flow. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

6.
Rainfall intensity–duration–frequency (IDF) relationships describe rainfall intensity as a function of duration and return period, and they are significant for water resources planning, as well as for the design of hydraulic constructions. In this study, the two‐parameter lognormal (LN2) and Gumbel distributions are used as parent distribution functions. Derivation of the IDF relationship by this approach is quite simple, because it only requires an appropriate function of the mean of annual maximum rainfall intensity as a function of rainfall duration. It is shown that the monotonic temporal trend in the mean rainfall intensity can successfully be described by this parametric function which comprises a combination of the parameters of the quantile function a(T) and completely the duration function b(d) of the separable IDF relationship. In the case study of Aegean Region (Turkey), the IDF relationships derived through this simple generalization procedure (SGP) may produce IDF relationships as successfully as does the well‐known robust estimation procedure (REP), which is based on minimization of the nonparametric Kruskal–Wallis test statistic with respect to the parameters θ and η of the duration function. Because the approach proposed herein is based on lower‐order sample statistics, risks and uncertainties arising from sampling errors in higher‐order sample statistics were significantly reduced. The authors recommend to establish the separable IDF relationships by the SGP for a statistically favorable two‐parameter parent distribution, because it uses the same assumptions as the REP does, it maintains the observed temporal trend in the mean additionally, it is easy to handle analytically and requires considerably less computational effort. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

7.
《水文科学杂志》2013,58(3):365-370
Abstract

Gauging stations where the stage—discharge relationship is affected by hysteresis due to unsteady flow represent a challenge in hydrometry. In such situations, the standard hydrometric practice of fitting a single-valued rating curve to the available stage—discharge measurements is inappropriate. As a solution to this problem, this study provides a method based on the Jones formula and nonlinear regression, which requires no further data beyond the available stage—discharge measurements, given that either the stages before and after each measurement are known along with the duration of each measurement, or a stage hydrograph is available. The regression model based on the Jones formula rating curve is developed by applying the monoclinal rising wave approximation and the generalized friction law for uniform flow, along with simplifying assumptions about the hydraulic and geometric properties of the river channel in conjunction with the gauging station. Methods for obtaining the nonlinear least-squares rating-curve estimates, while factoring in approximated uncertainty, are discussed. The broad practical applicability and appropriateness of the method are demonstrated by applying the model to: (a) an accurate, comprehensive and detailed database from a hydropower-generated highly dynamic flow in the Chattahoochee River, Georgia, USA; and (b) data from gauging stations in two large rivers in the USA affected by hysteresis. It is also shown that the model is especially suitable for post-modelling hydraulic and statistical validation and assessment.  相似文献   

8.
Complex seismic behaviour of soil–foundation–structure (SFS) systems together with uncertainties in system parameters and variability in earthquake ground motions result in a significant debate over the effects of soil–foundation–structure interaction (SFSI) on structural response. The aim of this study is to evaluate the influence of foundation flexibility on the structural seismic response by considering the variability in the system and uncertainties in the ground motion characteristics through comprehensive numerical simulations. An established rheological soil‐shallow foundation–structure model with equivalent linear soil behaviour and nonlinear behaviour of the superstructure has been used. A large number of models incorporating wide range of soil, foundation and structural parameters were generated using a robust Monte‐Carlo simulation. In total, 4.08 million time‐history analyses were performed over the adopted models using an ensemble of 40 earthquake ground motions as seismic input. The results of the analyses are used to rigorously quantify the effects of foundation flexibility on the structural distortion and total displacement of the superstructure through comparisons between the responses of SFS models and corresponding fixed‐base (FB) models. The effects of predominant period of the FB system, linear vs nonlinear modelling of the superstructure, type of nonlinear model used and key system parameters are quantified in terms of different probability levels for SFSI effects to cause an increase in the structural response and the level of amplification of the response in such cases. The results clearly illustrate the risk of underestimating the structural response associated with simplified approaches in which SFSI and nonlinear effects are ignored. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

9.
Using field observations at four gauging stations along the Inner Mongolia Reach of the Yellow River in China, this paper explores effects of the ice on the hydraulics of this river reach for four different conditions, namely: under open channel flow, during ice-running period, the ice-covered period, and the river break-up period. The rating curves were found to be well recognized under open channel situations, but were sometimes poorly defined and extremely variable under ice conditions. The results also show that the water level is insensitive to flowing ice prior to freeze-up. However, significant, but hardly surprising, variations were observed during ice-covered conditions. The rating curves for both the ice covered condition and river ice breakup period are developed and some related hydraulic issues are examined. Additionally, the impacts of the ice accumulation and associated riverbed deformation during ice period on the rating curves are discussed.  相似文献   

10.
Using field observations at four gauging stations along the Inner Mongolia Reach of the Yellow River in China, this paper explores effects of the ice on the hydraulics of this river reach for four different conditions, namely: under open channel flow, during ice-running period, the ice-covered period, and the river break-up period. The rating curves were found to be well recognized under open channel situations, but were sometimes poorly defined and extremely variable under ice conditions. The results also show that the water level is insensitive to flowing ice prior to freeze-up. However, significant, but hardly surprising, variations were observed during ice-covered conditions. The rating curves for both the ice covered condition and river ice breakup period are developed and some related hydraulic issues are examined. Additionally, the impacts of the ice accumulation and associated riverbed deformation during ice period on the rating curves are discussed.  相似文献   

11.
Integrated hydrological models are usually calibrated against observations of river discharge and piezometric head in groundwater aquifers. Calibration of such models against spatially distributed observations of river water level can potentially improve their reliability and predictive skill. However, traditional river gauging stations are normally spaced too far apart to capture spatial patterns in the water surface, whereas spaceborne observations have limited spatial and temporal resolution. Unmanned aerial vehicles can retrieve river water level measurements, providing (a) high spatial resolution; (b) spatially continuous profiles along or across the water body, and (c) flexible timing of sampling. A semisynthetic study was conducted to analyse the value of the new unmanned aerial vehicle‐borne datatype for improving hydrological models, in particular estimates of groundwater–surface water (GW–SW) interaction. Mølleåen River (Denmark) and its catchment were simulated using an integrated hydrological model (MIKE 11–MIKE SHE). Calibration against distributed surface water levels using the Differential Evolution Adaptive Metropolis algorithm demonstrated a significant improvement in estimating spatial patterns and time series of GW–SW interaction. After water level calibration, the sharpness of the estimates of GW–SW time series improves by ~50% and root mean square error decreases by ~75% compared with those of a model calibrated against discharge only.  相似文献   

12.
A procedure combining the Soil Conservation Service‐Curve Number (SCS‐CN) method and the Green–Ampt (GA) infiltration equation was recently developed to overcome some of the drawbacks of the classic SCS‐CN approach when estimating the volume of surface runoff at a sub‐daily time resolution. The rationale of this mixed procedure, named Curve Number for Green–Ampt (CN4GA), is to use the GA infiltration model to distribute the total volume of the net hyetograph (rainfall excess) provided by the SCS‐CN method over time. The initial abstraction and the total volume of rainfall given by the SCS‐CN method are used to identify the ponding time and to quantify the hydraulic conductivity parameter of the GA equation. In this paper, a sensitivity analysis of the mixed CN4GA parameters is presented with the aim to identify conditions where the mixed procedure can be effectively used within the Prediction in Ungauged Basin perspective. The effects exerted by changes in selected input parameters on the outputs are evaluated using rectangular and triangular synthetic hyetographs as well as 100 maximum annual storms selected from synthetic rainfall time series. When applied to extreme precipitation events, which are characterized by predominant peaks of rainfall, the CN4GA appears to be rather insensitive to the input hydraulic parameters of the soil, which is an interesting feature of the CN4GA approach and makes it an ideal candidate for the rainfall excess estimation at sub‐daily temporal resolution at ungauged sites. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

13.
Most of meteorological stations in Chile register rainfall amounts once every 24 h. The creation of intensity–duration–frequency (IDF) curves requires continuous recorded data, and this insufficiency of proper instrumentation has resulted in a lack of IDF curves nationwide. The objective of this study is to further develop and evaluate the feasibility of a new method to estimate IDF curves in ungauged stations under Mediterranean climates of central Chile. A technique used to address this problem is the use of a storm index (SI), also known as the ‘K’ method, which allows the construction of IDF curves from stations with discontinuous data, by extrapolating data from stations with continuous records, as long as daily rainfall intensities for both stations differ by less than 2 mm h?1. To test the applicability of this method, SI values were calculated for 40 meteorological stations located throughout Central Chile (latitudes 30°S to 40°S). The extrapolated IDF curves were then compared with observed data, and the goodness of fit was determined. The results indicate that the storm index method can adequately estimate hourly IDF curve values for stations lacking of continuous rainfall data. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

14.
Many of the existing stream–aquifer interaction models available in the literature are very complex with limited applicability in semi‐gauged and ungauged catchments. In this study, to estimate the influent and effluent subsurface water fluxes under limited geo‐hydrometeorological data availability conditions, a simple stream–aquifer interaction model, namely, the variable parameter McCarthy–Muskingum (VPMM) hillslope‐storage Boussinesq (hsB) model, has been developed. This novel model couples the VPMM streamflow transport with the hsB groundwater flow transport modules in online mode. In this integrated model, the surface water–groundwater flux exchange process is modelled by the Darcian approach with the variable hydraulic heads between the river stage and groundwater table accounting for the rainfall forcing. Considering the exchange fluxes in the hyporheic zone and lateral overland flow contribution, this approach is field tested in a typical 48‐km stretch of the Brahmani River in eastern India to simulate the streamflow and its depth with the minimum Nash–Sutcliffe efficiency of 94% and 88%; the maximum root mean square error of 134 m3/s and 0.35 m; and the minimum index of agreement of 98% and 97%, respectively. This modelling approach could be very well utilized in data‐scarce world‐river basins to estimate the stream–aquifer exchange flux due to rainfall forcings.  相似文献   

15.
An existing two‐dimensional macroelement for reinforced concrete beam–column joints is extended to a three‐dimensional macroelement. The three‐dimensional macroelement for beam–column joints consists of six rigid interface plates and uniaxial springs for concrete, steel, and bond–slip, which model the inside of a beam–column joint. The mechanical models for the materials and the stiffness equation for the springs are also presented. To validate the model, we used test results from three slab–beam–column sub‐assemblages subjected to bi‐lateral cyclic load. It is revealed that the new joint model is capable of capturing the strength of beam–column joints and the bidirectional interaction in joint shear response, including the concentration of damage in the beam–column joint, the pinching nature in hysteretic behavior, the stiffness degradation, and strength deterioration resulting from cyclic and bidirectional loading. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

16.
River discharge values, estimated using a rating curve, are subject to both random and epistemic errors. We present a new likelihood function, the ‘Voting Point’ likelihood that accounts for both error types and enables generation of multiple possible multisegment power‐law rating curve samples that aim to represent the total uncertainty. The rating curve samples can be used for subsequent discharge analysis that needs total uncertainty estimation, e.g. regionalisation studies or calculation of hydrological signatures. We demonstrate the method using four catchments with diverse rating curve error characteristics, where epistemic uncertainty sources include weed growth, scour and redeposition of the bed gravels in a braided river, and unconfined high flows. The results show that typically, the posterior rating curve distributions include all of the gauging points and succeed in representing the spread of discharge values caused by epistemic rating errors. We aim to provide a useful method for hydrology practitioners to assess rating curve, and hence discharge, uncertainty that is easily applicable to a wide range of catchments and does not require prior specification of the particular types and causes of epistemic error at the gauged location. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

17.
The Hargreaves–Samani (HS) evapotranspiration equation is very useful for the on‐site irrigation management in data‐short situations such as small and midsize farms and landscaped areas. Although much work has been performed to improve the precision of the evapotranspiration (ETo) estimates for use at new locations, the results have not been consistent and many have not been confirmed by other works. The purpose of this study was to review and to evaluate the seven most promising parameters used for the calibration of the HS evapotranspiration equation, using two different regions: California and Bolivia. The results of this study show that annual correlations between HS and Penman–Monteith can be misleading because the correlation is poor in the humid months and improves progressively along the dry season until the first rains. The average monthly wind speed can be used for both spatial and seasonal calibration of the HS equation, especially during the irrigation season. Elevation and precipitation can be used to calibrate the HS equation when no reference ETo values are available at nearby stations. The monthly value of KT calculated from solar radiation follows a parabolic function along the year and should not be used for improving the estimates of the HS equation because the clearness index produces better results than actual solar radiation measurements. The results also indicate that the use of distance to coast, temperature range and temperature parameter does not improve the precision of the HS equation. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

18.
  相似文献   

19.
  相似文献   

20.
Stream–subsurface exchange plays a significant role in the fate and transport of contaminants in streams. It has been modelled explicitly by considering fundamental processes such as hydraulic exchange, colloid filtration, and contaminant interactions with streambed sediments and colloids. The models have been successfully applied to simulate the transport of inorganic metals and nutrients. In this study, laboratory experiments were conducted in a recirculating flume to investigate the exchange of a hydrophobic organic contaminant, p,p′‐dichloro‐diphenyl‐dichloroethane (DDE), between a stream and a quartz sand bed. A previously developed process‐based multiphase exchange model was modified by accounting for the p,p′‐DDE kinetic adsorption to and desorption from the bed sediments/colloids and was applied to interpret the experimental results. Model input parameters were obtained by conducting independent small‐scale batch experiments. Results indicate that the immobilization of p,p′‐DDE in the quartz sand bed can occur under representative natural stream conditions. The observed p,p′‐DDE exchange was successfully simulated by the process‐based model. The model sensitivity analysis results show that the exchange of p,p′‐DDE can be sensitive to either the sediment sorption/desorption parameters or colloidal parameters depending on the experimental conditions tested. For the experimental conditions employed here, the effect of colloids on contaminant transport is expected to be minimal, and the stream–subsurface exchange of p,p′‐DDE is dominated by the interaction of p,p′‐DDE with bed sediment. The work presented here contributes to a better mechanistic understanding of the complex transport process that hydrophobic organic contaminants undergo in natural streams and to the development of reliable, predictive models for the assessment of impacted streams. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号