首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Southern Central America is a Late Mesozoic/Cenozoic island arc that evolved in response to the subduction of the Farallón Plate beneath the Caribbean Plate in the Late Cretaceous and, from the Oligocene, the Cocos and Nazca Plates. Southern Central America is one of the best studied convergent margins in the world. The aim of this paper is to review the sedimentary and structural evolution of arc‐related sedimentary basins in southern Central America, and to show how the arc developed from a pre‐extensional intra‐oceanic island arc into a doubly‐vergent, subduction orogen. The Cenozoic sedimentary history of southern Central America is placed into the plate tectonic context of existing Caribbean Plate models. From regional basin analysis, the evolution of the southern Central American island arc is subdivided into three phases: (i) non‐extensional stage during the Campanian; (ii) extensional phase during the Maastrichtian‐Oligocene with rapid basin subsidence and deposition of arc‐related, clastic sediments; and (iii) doubly‐vergent, compressional arc phase along the 280 km long southern Costa Rican arc segment related to either oblique subduction of the Nazca plate, west‐to‐east passage of the Nazca–Cocos–Caribbean triple junction, or the subduction of rough oceanic crust of the Cocos Plate. The Pleistocene subduction of the Cocos Ridge contributed to the contraction but was not the primary driver. The architecture of the arc‐related sedimentary basin‐fills has been controlled by four factors: (i) subsidence caused by tectonic mechanisms, linked to the angle and morphology of the incoming plate, as shown by the fact that subduction of aseismic ridges and slab segments with rough crust were important drivers for subduction erosion, controlling the shape of forearc and trench‐slope basins, the lifespan of sedimentary basins, and the subsidence and uplift patterns; (ii) subsidence caused by slab rollback and resulting trench retreat; (iii) eustatic sea‐level changes; and (iv) sediment dispersal systems.  相似文献   

2.
In order to provide references of the subduction process of the Paleo‐Pacific Plate beneath the Jiamusi Block, this paper studied the clastic rocks of the Nanshuangyashan Formation using modal analysis of sandstones, mudstone elements geochemistry, and detrital zircon U–Pb dating. These results suggest the maximum depositional age of the Nanshuangyashan Formation was between the Norian and Rhaetian (206.8 ±4.6 Ma, mean standard weighted deviation (MSWD) = 0.17). Whole‐rock geochemistry of mudstone indicates that source rocks of the Nanshuangyashan Formation were primarily felsic igneous rocks and quartzose sedimentary rocks, which were mainly derived from the stable continental block and a magmatic arc. Detrital zircon analysis showed the Nanshuangyashan Formation samples recorded four main age groups: 229–204 Ma, 284–254 Ma, 524–489 Ma and 930–885 Ma, and the provenances were attributed to the Jiamusi Block and a Late Triassic magmatic arc near the study area. Furthermore, the eastern Jiamusi Block was a backarc basin, affected by the subduction of the Paleo‐Pacific Plate in the Late Triassic, but the magmatic arc related to the subduction near the study area finally died out due to tectonic changes and stratigraphic erosion.  相似文献   

3.
Geological studies indicate that the southeastern Sanandaj–Sirjan Zone, located in the southeastern Zagros Orogenic Belt, is subdivided transversally into the Esfahan–Sirjan Block with typical Central Iranian stratigraphic features and the Shahrekord–Dehsard Terrane consisting of Paleozoic and Lower Mesozoic metamorphic rocks. The Main Deep Fault (Abadeh Fault) is a major lithospheric fault separating the two parts. The purpose of this paper is to clarify the role of the southeastern Sanandaj–Sirjan Zone in the tectonic evolution of the southeastern Zagros Orogenic Belt on the basis of geological evidence. The new model implies that Neo‐Tethys 1 came into being when the Central Iran Microcontinent split from the northeastern margin of Gondwana during the Late Carboniferous to Early Permian. During the Late Triassic a new spreading ridge, Neo‐Tethys 2, was created to separate the Shahrekord–Dehsard Terrane from Afro–Arabian Plate. The Zagros sedimentary basin was formed on a continental passive margin, southwest of Neo‐Tethys 2. The two ophiolitic belts of Naien–Shahrebabak–Baft and Neyriz were developed to the northeast of Neo‐Tethys 1 and southwest of Neo‐Tethys 2 respectively, related to the sinking of the lithosphere of the Neo‐Tethys 1 in the Late Cretaceous. It can be concluded that deposition of the Paleocene conglomerate on the Central Iran Microcontinent and Pliocene conglomerate in the Zagros Sedimentary Basin is directly linked to the uplift generated by collision.  相似文献   

4.
Transition boundary between Zagros continental collision and Makran oceanic-continental subduction can be specified by two wide limits: (a) Oman Line is the seismicity boundary with a sizeable reduction in seismicity rate from Zagros in the west to Makran in the east; and (b) the Zendan-Minab-Palami (ZMP) fault system is believed to be a prominent tectonic boundary. The purpose of this paper is to analyze the stress field in the Zagros-Makran transition zone by the iterative joint inversion method developed by Vavrycuk (Geophysical Journal International 199:69-77, 2014). The results suggest a rather uniform pattern of the stress field around these two boundaries. We compare the results with the strain rates obtained from the Global Positioning System (GPS) network stations. In most cases, the velocity vectors show a relatively good agreement with the stress field except for the Bandar Abbas (BABS) station which displays a relatively large deviation between the stress field and the strain vector. This deviation probably reflects a specific location of the BABS station being in the transition zone between Zagros continental collision and Makran subduction zones.  相似文献   

5.
The Solonker Suture Zone is thought to record the terminal evolution of the Central Asian Orogenic Belt (CAOB) in Inner Mongolia. However, two contrasting interpretations of the timing of suturing of the Solonker Suture Zone exist: (i) Permian to Early Triassic; and (ii) Middle Devonian or Late Devonian to Carboniferous. The Shuangjing Schist is exposed in the Linxi area along the Xar Moron Fault Zone, which marks the southern boundary of the Solonker Suture Zone in the eastern section of the CAOB, and thus provides insight into the timing of suturing of the Solonker Suture Zone. Detailed and systematic analysis of the petrology and geochemistry of the Shuangjing Schist shows that the Shuangjing Schist developed by greenschist facies prograde metamorphism of a volcanisedimentary rock series protolith. The volcanic parts of the Shuangjing Schist are a calc‐alkaline series with large volumes of intermediate members and subordinate acidic members. Volcanism occurred in a magmatic arc on the continental margin and was induced by subduction‐related magmatism resulting from mantle metasomatism. The sedimentary parts of the Shuangjing Schist reflect a transition from continental shelf to abyssal plain sedimentation. The formation of the Shuangjing Schist is suggested to be related to closure of an arc/forearc‐related ocean basin. The timing is constrained by a laser ablation inductively coupled plasma–mass spectrometry (LA‐ICP–MS) U–Pb magmatic zircon age of 298 ± 2 Ma from a carbonaceous biotite–plagioclase schist that was intruded by granite at 272 ± 2 Ma. In the Linxi area, southward subduction of the arc/forearc basin led to uplift, thickening, collapse, and erosion of the overriding continental crust. Collapse induced extension and widespread magmatism along the volcanic arc at the northern margin of the North China Craton. The closure of the arc/forearc‐related oceanic basin led to the formation of Late Permian to Middle Triassic collisional granites and the subsequent end of the collision of the Solonker Suture Zone.  相似文献   

6.
The Chiang Khong segment of the Chiang Khong–Lampang–Tak Volcanic Belt is composed of three broadly meridional sub‐belts of mafic to felsic volcanic, volcaniclastic, and associated intrusive rocks. Associated sedimentary rocks are largely non‐marine red beds and conglomerates. Three representative Chiang Khong lavas have Late Triassic (223–220 Ma) laser ablation inductively coupled mass‐spectroscopy U–Pb zircon ages. Felsic‐dominated sequences in the Chiang Khong Western and Central Sub‐belts are high‐K calc–alkaline rocks that range from basaltic to dominant felsic lavas with rare mafic dykes. The Western Sub‐belt lavas have slightly lower high field strength element contents at all fractionation levels than equivalent rocks from the Central Sub‐belt. In contrast, the Eastern Sub‐belt is dominated by mafic lavas and dykes with compositions transitional between E‐mid‐oceanic ridge basalt and back‐arc basin basalts. The Eastern Sub‐belt rocks have higher FeO* and TiO2 and less light rare earth element enrichment than basalts in the high‐K sequences. Basaltic and doleritic dykes in the Western and Central sub‐belts match the composition of the Eastern Sub‐belt lavas and dykes. A recent geochemical study of the Chiang Khong rocks concluded that they were erupted in a continental margin volcanic arc setting. However, based on the dominance of felsic lavas and the mainly non‐marine associated sediments, we propose an alternative origin, in a post‐collisional extensional setting. A major late Middle to early Late Triassic collisional orogenic event is well documented in northern Thailand and Yunnan. We believe that the paucity of radiometric dates for arc‐like lavas in the Chiang Khong–Lampang–Tak Volcanic Belt that precede this orogenic event, coupled with the geochemistry of the Chiang Khong rocks, and strong compositional analogies with other post‐collisional magmatic suites, are features that are more typical of volcanic belts formed in a rapidly evolving post‐collisional, basin‐and range‐type extensional setting.  相似文献   

7.
Piera  Spadea  Massimo  D'Antonio 《Island Arc》2006,15(1):7-25
Abstract The Southern Uralides are a collisional orogen generated in the Late Devonian–Early Carboniferous by the collision of the Magnitogorsk island arc (MA) generated in the Early to Middle Devonian by intra‐oceanic convergence opposite to the continental margin, and the continental margin of the East European craton. A suture zone of the arc to the continental margin, the Main Uralian Fault (MUF), is marked by ophiolites and exhumed high‐pressure–low‐temperature metamorphic rocks of continental origin. The pre‐orogenic events of the Southern Urals and their geodynamic setting are traced by means of fluid‐immobile incompatible trace elements (rare earth elements and high field strength elements) and Sr–Nd–Pb isotope geochemistry of the MA suites, in particular the protoarc suite with boninites and probably ankaramites, and the mature arc comprised of island arc tholeiitic (IAT) suites, transitional IAT to calc‐alkaline (CA), and CA suites. The MA volcanics result in genetically distinct magmatic source components. In particular, depleted normal‐mid‐oceanic ridge basalt‐type mantle sources with various enrichments in a slab‐derived aqueous fluid component are evident. The enriched component is not involved in significant amounts, as testified by the rather radiogenic Nd isotopes and unradiogenic Pb isotopes. Further information on the pre‐orogenic events is provided by the Mindyak Massif metagabbros derived from diverse gabbroic protoliths that were affected by oceanic rodingitization, and subsequently by a high‐temperature (HT) metamorphism related to the development of a metamorphic sole. The HT metamorphism has the same age as the protoarc volcanism, and constrains the initiation of subduction at approximately 410 Ma. Consequently, the maximum timespan between initial intra‐oceanic convergence and final collision is approximately 31 my, a duration consistent with that of present‐day ongoing collisions in the western Pacific. The characteristics of early volcanism and the traces of a metamorphic sole provide useful criteria to attribute most MUF ophiolites to the Tethyan type with a complex pre‐orogenic evolution.  相似文献   

8.
Olivier  Monod  Michel  Faure  Juan-Carlos  Salinas 《Island Arc》1994,3(1):25-34
Abstract The pre-Oligocene structure of southwest Mexico, south of the trans-Mexico volcanic axis, is investigated from Taxco (Guerrero state, abbreviation: Gro) to the Pacific coast. Three volcano-sedimentary units are recognized; from east to west the calc-alkaline Teloloapan, tholeiitic Arcelia and calc-alkaline Zihuatanejo suites. Structural and stratigraphic data show that the Teloloapan volcanic arc, active during ?Late Jurassic and early Cretaceous, was built upon continental basement. The Teloloapan lavas are overlain by the Albian–Cenomanian Morelos platform carbonates and followed by the Upper Cretaceous Mexcala flysch. In contrast, the Arcelia pillow lavas are associated with sandstones and cherts of Albian-?Cenomanian age. The Zihuatanejo arc was also installed upon continental basement and its magmatic activity was in part coeval with Arcelia magmatism. Unlike the almost undeformed Zihuatanejo volcanic rocks, all the other volcanic units are involved in east-vergent thrusting and recumbent folding associated with ductile tectonics, as well as the Late Cretaceous Mexcala flysch overlying the Morelos platform carbonates. Contrasting with previous views, the present results do not support a major mid-Cretaceous thrusting event in the study area. The new geodynamic interpretation proposed here considers that the Arcelia rocks were formed in a marginal basin situated east of the Zihuatanejo arc. Closure of this basin in Paleocene times is responsible for the east vergent thrust tectonics in SW Mexico.  相似文献   

9.
The Qinling Orogenic Belt is divided commonly by the Fengxian-Taibai strike-slip shear zone and the Huicheng Basin into the East and West Qinling mountains,which show significant geological differences after the Indosinian orogeny.The Fengxian-Taibai fault zone and the Meso-Cenozoic Huicheng Basin,situated at the boundary of the East and West Qinling,provide a natural laboratory for tectonic analysis and sedimentological study of intracontinental tectonic evolution of the Qinling Orogenic Belt.In order to explain the dynamic development of the Huicheng Basin and elucidate its post-orogenic tectonic evolution at the junction of the East and West Qinling,we studied the geometry and kinematics of fault zones between the blocks of West Qinling,as well as the sedimentary fill history of the Huicheng Basin.First,we found that after the collisional orogeny in the Late Triassic,post-orogenic extensional collapse occurred in the Early and Middle Jurassic within the Qinling Orogenic Belt,resulting in a series of rift basins.Second,in the Late Jurassic and Early Cretaceous,a NE-SW compressive stress field caused large-scale sinistral strike-slip faults in the Qinling Orogenic Belt,causing intracontinental escape tectonics at the junction of the East and West Qinling,including eastward finite escape of the East Qinling micro-plate and southwest lateral escape of the Bikou Terrane.Meanwhile,the strike-slip-related Early Cretaceous sedimentary basin was formed with a right-order echelon arrangement in sinistral shear zones along the southern margin of the Huicheng fault.Overall during the Mesozoic,the Huicheng Basin and surrounding areas experienced four tectonic evolutionary stages,including extensional rift basin development in the Early and Middle Jurassic,intense compressive uplift in the Late Jurassic,formation of a strike-slip extensional basin in the Early Cretaceous,and compressive uplift in the Late Cretaceous.  相似文献   

10.
Deformation of the Circum-Rhodope Belt Mesozoic (Middle Triassic to earliest Lower Cretaceous) low-grade schists underneath an arc-related ophiolitic magmatic suite and associated sedimentary successions in the eastern Rhodope-Thrace region occurred as a two-episode tectonic process: (i) Late Jurassic deformation of arc to margin units resulting from the eastern Rhodope-Evros arc–Rhodope terrane continental margin collision and accretion to that margin, and (ii) Middle Eocene deformation related to the Tertiary crustal extension and final collision resulting in the closure of the Vardar ocean south of the Rhodope terrane. The first deformational event D1 is expressed by Late Jurassic NW-N vergent fold generations and the main and subsidiary planar-linear structures. Although overprinting, these structural elements depict uniform bulk north-directed thrust kinematics and are geometrically compatible with the increments of progressive deformation that develops in same greenschist-facies metamorphic grade. It followed the Early-Middle Jurassic magmatic evolution of the eastern Rhodope-Evros arc established on the upper plate of the southward subducting Maliac-Meliata oceanic lithosphere that established the Vardar Ocean in a supra-subduction back-arc setting. This first event resulted in the thrust-related tectonic emplacement of the Mesozoic schists in a supra-crustal level onto the Rhodope continental margin. This Late Jurassic-Early Cretaceous tectonic event related to N-vergent Balkan orogeny is well-constrained by geochronological data and traced at a regional-scale within distinct units of the Carpatho-Balkan Belt. Following subduction reversal towards the north whereby the Vardar Ocean was subducted beneath the Rhodope margin by latest Cretaceous times, the low-grade schists aquired a new position in the upper plate, and hence, the Mesozoic schists are lacking the Cretaceous S-directed tectono-metamorphic episode whose effects are widespread in the underlying high-grade basement. The subduction of the remnant Vardar Ocean located behind the colliding arc since the middle Cretaceous was responsible for its ultimate closure, Early Tertiary collision with the Pelagonian block and extension in the region caused the extensional collapse related to the second deformational event D2. This extensional episode was experienced passively by the Mesozoic schists located in the hanging wall of the extensional detachments in Eocene times. It resulted in NE-SW oriented open folds representing corrugation antiforms of the extensional detachment surfaces, brittle faulting and burial history beneath thick Eocene sediments as indicated by 42.1–39.7 Ma 40Ar/39Ar mica plateau ages obtained in the study. The results provide structural constraints for the involvement components of Jurassic paleo-subduction zone in a Late Jurassic arc-continental margin collisional history that contributed to accretion-related crustal growth of the Rhodope terrane.  相似文献   

11.
Abstract The Lesnaya Group is part of a thick, poorly dated turbidite assemblage that sits in the footwall of a regionally extensive collision zone in which the Cretaceous–Paleocene Olutorsky island arc terrane was obducted onto continental margin basin strata. Nannoplankton from 18 samples from the upper part of the Lesnaya Group yield Paleocene through Middle Eocene assemblages. Detrital zircons from nine sandstone samples have a young population of fission-track ages that range from 43.7 ± 3.4 to 55.5 ± 3.5 Ma (uppermost Paleocene to Middle Eocene). The deformed footwall rocks of the Lesnaya Group and the overlying thrusts of the Olutorsky arc terrane, are unconformably overlain by neoautochthonous deposits which are Lutetian (lower Middle Eocene) and younger. Together, these new data indicate that thrusting, which is inferred to have been driven by collision of the Cretaceous–Paleocene island arc with north-eastern Asia, took place in the mid-Lutetian, at about 45 Ma.  相似文献   

12.
The spatiotemporal distribution of Cretaceous–Paleogene granitic rocks in southwestern Japan is investigated to understand the origin of the granitic batholith belt and to reconstruct the tectonic setting of emplacement. New U–Pb zircon ages for 92 samples collected from a region measuring 50 km (E–W) by 200 km (N–S) reveals a stepwise northward younging of granitic rocks aged between 95 and 30 Ma with an age‐data gap between 60 and 48 Ma. Based on the spatiotemporal distribution of granite ages, we examine two plausible models to explain the pattern of magmatic activity: (i) subduction of a segmented spreading ridge and subsequent slab melting (ridge‐subduction model), and (ii) subduction with a temporally variable subduction angle and corresponding spatial distribution of normal arc magmatism (subduction angle model). We optimize the model parameters to fit the observed magmatism in time and space, and compare the best‐fit models. As to ridge subduction model, the best‐fit solution indicates that the spreading ridge started to subduct at approximately 100 Ma, and involved a 45‐km‐wide section of the ridge segment, a subduction obliquity of 30°, and a slow migration velocity (～1.6 cm/y) of the ridge. These values are within the ranges of velocities observed for present‐day ridge subduction at the Chile trench. On the other hand, the best‐fit solution of subduction angle model indicates that the subduction angle decreases stepwise from 37° at 95 Ma, 32° at 87 Ma, 22° at 72 Ma, to 20° at 65 Ma, shifting magmatic region towards the continental side. These results and comparison, together with constraints on the geometry of the tectonic setting provided by previous studies, suggest that the ridge subduction model better explains the limited duration of magmatism, although both models broadly fit the data and cannot be ruled out.  相似文献   

13.
Terrane analysis and accretion in North-East Asia   总被引：2，自引：0，他引：2  
Abstract A terrane map of North-East Asia at 1:5 000 000 scale has been compiled. The map shows terranes of different types and ages accreted to the North-Asian craton in the Mesozoic–Cenozoic, sub-and superterranes, together with post-amalgamation and post-accretion assemblages. The great Kolyma-Omolon superterrane adjoins the north-east craton margin. It is composed of large angular terranes of continental affinity: craton fragments and fragments of the passive continental margin of Siberia, and island arc, oceanic and turbidite terranes that are unconformably overlain by shallow marine Middle-Upper Jurassic deposits. The superterrane resulted from a long subduction of the Paleo-Pacific oceanic crust beneath the Alazeya arc. Its south-west boundary is defined by the Late Jurassic Uyandina-Yasachnaya marginal volcanic arc which was brought about by subduction of the oceanic crust that separated the superterrane from Siberia. According to paleomagnetic evidence the width of the basin is estimated to be 1500–2000 km. Accretion of the superterrane to Siberia is dated to the late Late Jurassic-Neocomian. The north-east superterrane boundary is defined by the Lyakhov-South Anyui suture which extends across southern Chukotka up to Alaska. Collision of the superterrane with the Chukotka shelf terrane is dated to the middle of the Cretaceous. The Okhotsk-Chukotka belt, composed of Albian-Late Cretaceous undeformed continental volcan-ites, defines the Cretaceous margin of North Asia. Terranes eastward of the belt are mainly of oceanic affinity: island arc upon oceanic crust, accretion wedge and turbidite terranes, as well as cratonic terranes and fragments of magmatic arcs on the continental crust and metamorphic terranes of unclear origin and age. The time of their accretion is constrained by post-accretionary volcanic belts that extend parallel to the Okhotsk-Chukotka belt but are displaced to the east: the Maastrichtian-Miocene Kamchatka-Koryak belt and the Eocene-Quaternary Central Kamchatka belt which mark active margins of the continent of corresponding ages.  相似文献   

14.
A broad zone of dominantly subaerial silicic volcanism associated with regional extensional faulting developed in southern South America during the Middle Jurassic, contemporaneously with the initiation of plutonism along the present Pacific continental margin. Stratigraphic variations observed in cross sections through the silicic Jurassic volcanics along the Pacific margin of southernmost South America indicate that this region of the rift zone developed as volcanism continued during faulting, subsidence and marine innundation. A deep, fault-bounded submarine trough formed near the Pacific margin of the southern part of the volcano-tectonic rift zone during the Late Jurassic. Tholeiitic magma intruded within the trough formed the mafic portion of the floor of this down-faulted basin. During the Early Cretaceous this basin separated an active calc-alkaline volcanic arc, founded on a sliver of continental crust, from the then volcanically quiescent South American continent. Geochemical data suggest that the Jurassic silicic volcanics along the Pacific margin of the volcano-tectonic rift zone were derived by crustal anatexis. Mafic lavas and sills which occur within the silicic volcanics have geochemical affinities with both the tholeiitic basalts forming the ophiolitic lenses which are the remnants of the mafic part of the back-arc basin floor, and also the calc-alkaline rocks of the adjacent Patagonian batholith and their flanking lavas which represent the eroded late Mesozoic calc-alkaline volcanic arc. The source of these tholeiitic and calc-alkaline igneous rocks was partially melted upper mantle material. The igneous and tectonic processes responsible for the development of the volcano-tectonic rift zone and the subsequent back-arc basin are attributed to diapirism in the upper mantle beneath southern South America. The tectonic setting and sequence of igneous and tectonic events suggest that diapirism may have been initiated in response to subduction.  相似文献   

15.
Nadezhda I.  Filatova 《Island Arc》1995,4(2):128-139
Abstract The Cretaceous geodynamic and paleogeographic evolution of the northeastern Asian continental margin is summarized in five maps for time-intervals of 115-110, 100-90, 90-85, 85-74 and 70-50 Ma. Four major evolutionary stages are recognized: (i) the moderate extensional tectonic regime and origination of a system of island arcs in the Jurassic-Neocomian stage; (ii) Middle Cretaceous strong collisional and accretional processes resulting in the Asian continent formation in the Barremian-Early Albian stage; (iii) the origination of the subduction-related Okhotsk-Chukotka continental marginal volcanic belt in relation to the newly formed convergent plate boundary in the Late Albian-Senonian stage; and (iv) the next collision accompanied by the extinction of the subduction-related volcanism in the Late Cretaceous-Early Paleocene stage (Laramian orogeny) and displayed rift-related processes with the intraplate-type volcanism on the Asian continental margin. Those stages had been established through the whole Pacific ring and had close genetic relationships with mid-ocean ridges tectonic activity.  相似文献   

16.
Effective elastic thickness of island arc lithosphere under Japan   总被引：1，自引：0，他引：1  
Abstract Using topography and observed gravity anomalies, we have estimated the effective elastic thickness as a measure of strength of Japanese island arc lithosphere. The thickness is found to range from about 3 km to >20 km. The thickness seems to be controlled primarily by the thermal state of the lithosphere. The higher the heat flow, the thinner is the elastic plate. However, several areas show significant deviations. The smaller effective elastic thickness in the northern Ryukyu arc than that inferred from heat flow may be attributed to the stress regime. In Japan, extensional tectonics are going on only in the Ryukyu arc region. Shallow subducting slab under the south-western Japan frontal arc probably increases the effective thickness by several kilometers. The determined effective elastic thickness suggests that when we consider vertical movements in the volcanic arc, we should take account of topographic and subsurface loading over a few hundred kilometers. However, if the dip of the slab is shallow, the flexural responses of the underlying slab, not only that of the island arc lithosphere, should be taken into account for the compensation, as is the case of the south-western Japan frontal arc.  相似文献   

17.
—Extreme cooling rates (500 °C/m.y.) during the late stage, 22–18 Ma, orogenic evolution of the Alpine Betic-Rif belt are suggested to result from rapid exhumation caused by tectonic extrusion and concomitant extensional tectonics. The extrusional/extensional tectonic setting is controlled by the SW-NE trending break-off scar left in the lithosphere of the Alborán Sea and SE Spain after detachment of a lithospheric slab. The extruded material represents the collisional crustal nappe pile (together with fragments of underlying mantle, such as the Ronda peridotites) and the cause of the extrusion is the thermal softening within the crustal section during and after collision. The extrusion/extension took place under the influence of a NW-SE directed compressive regime, perpendicular to the collisional belt. At the same time the sub-lithospheric mantle still showed the E-W compressive regime of the collisional stage. The Alpine tectono-metamorphic evolution of the Betic-Rif belt in the W Mediterranean thus comprises two main stages: (1) continental collision with formation of primary nappes and high-pressure metamorphic parageneses, (2) tectonic extrusion with vertically directed tectonics (high pressure, very rapid decompression) and extensional tectonics with roughly horizontal, lateral transport and final emplacement of the extruded mélange in the form of a stack of detachment sheets (low pressure, very rapid cooling). This model for the Betic-Rif may offer important constraints to all rapidly exhumed convergent terranes.  相似文献   

18.
Abstract Temporal–spatial variations in Late Cenozoic volcanic activity in the Chugoku area, southwest Japan, have been examined based on 108 newly obtained K–Ar ages. Lava samples were collected from eight Quaternary volcanic provinces (Daisen, Hiruzen, Yokota, Daikonjima, Sambe, Ooe–Takayama, Abu and Oki) and a Tertiary volcanic cluster (Kibi Province) to cover almost all geological units in the province. Including published age data, a total of 442 Cenozoic radiometric ages are now available. Across‐arc volcanic activity in an area approximately 500 km long and 150 km wide can be examined over 26 million years. The period corresponds to syn‐ and post‐back‐arc basin opening stages of the island arc. Volcanic activity began in the central part of the rear‐arc ca 26 Ma. This was followed by arc‐wide expansion at 20 Ma by eruption at two rear‐arc centers located at the eastern and western ends. Expansion to the fore‐arc occurred between 20 and 12 Ma. This Tertiary volcanic arc was maintained until 4 Ma with predominant alkali basalt centers. The foremost‐arc zone activity ceased at 4 Ma, followed by quiescence over the whole arc between 4 and 3 Ma. Volcanic activity resumed at 3 Ma, covering the entire rear‐arc area, and continued until the present to form a Quaternary volcanic arc. Adakitic dacite first occurred at 1.7 Ma in the middle of the arc, and spread out in the center part of the Quaternary volcanic arc. Alkali basalt activities ceased in the area where adakite volcanism occurred. Fore‐arc expansion of the volcanic arc could be related to the upwelling and expansion of the asthenosphere, which caused opening of the Japan Sea. Narrowing of the volcanic zone could have been caused by progressive Philippine Sea Plate subduction. Deeper penetration could have caused melting of the slab and resulted in adakites. Volcanic history in the Late Cenozoic was probably controlled by the history of evolution of the upper mantle structure, coinciding with back‐arc basin opening and subsequent reinitiation of subduction.  相似文献   

19.
The tectonic setting of the late mesozoic of South China is in a debate between two schools of thought: an intra‐continental rift zone along a passive continental margin or active rifting associated with subduction of the paleo‐Pacific Plate. In this study, we present new sensitive high‐resolution ion microprobe (SHRIMP) U‐Pb zircon ages, along with geochemical data of three basic dikes that cross‐cut the Dexing porphyry copper deposit. The deposit is the largest of its kind in eastern China and part of large scale mineralization associated with Mesozoic magmatic activity in the area. Our results indicate that the dikes were emplaced in the Late Jurassic with an average U‐Pb age of 153.5 ± 2.4 Ma. The intrusions have bulk εNd(t) of ca +0.7 and zircon εHf(t) value of +1.54 to +6.92. Based on relatively enriched light rare earth elements (LREE) and depleted high‐field‐strength elements (HFSE) abundances with pronounced negative Ta–Nb, Hf–Zr and Ti anomalies in multi‐element diagrams, we propose that these dikes were derived from a subduction‐modified lithospheric mantle source. The variability in Hf isotopes identifies some degree of crustal contaminations. Our data support a scenario with a back‐arc extensional setting or an intra‐arc rift environment associated with the westward subduction of the paleo‐Pacific Plate at or prior to the late Jurassic as the most likely cause for these subduction signatures.  相似文献   

20.
Abstract In this paper, a summary of the tectonic history of the Mirdita ophiolitic nappe, northern Albania, is proposed by geological and structural data. The Mirdita ophiolitic nappe includes a subophiolite mélange, the Rubik complex, overlain by two ophiolite units, referred to as the Western and Eastern units. Its history started in the Early Triassic with a rifting stage followed by a Middle to Late Triassic oceanic opening between the Adria and Eurasia continental margins. Subsequently, in Early Jurassic time, the oceanic basin was affected by convergence with the development of a subduction zone. The existence of this subduction zone is provided by the occurrence of the supra‐subduction‐zone‐related magmatic sequences found in both the Western and Eastern units of the Mirdita ophiolitic nappe. During the Middle Jurassic, continuous convergence resulted in the obduction of the oceanic lithosphere, in two different stages – the intraoceanic and marginal stages. The intraoceanic stage is characterized by the westward thrusting of a young and still hot section of oceanic lithosphere leading to the development of a metamorphic sole. In the Late Jurassic, the marginal stage developed by the emplacement of the ophiolitic nappe onto the continental margin. During this second stage, the emplacement of the ophiolites resulted in the development of the Rubik complex. In the Early Cretaceous, the final emplacement of the ophiolites was followed by the unconformable sedimentation of the Barremian–Senonian platform carbonate. From the Late Cretaceous to the Middle Miocene, the Mirdita ophiolitic nappe was translated westward during the progressive migration of the deformation front toward the Adria Plate. In the Middle to Late Miocene, a thinning of the whole nappe pile was achieved by extensional tectonics, while the compression was still active in the westernmost areas of the Adria Plate. On the whole, the Miocene deformations resulted in the uplift and exposition of the Mirdita ophiolites as observed today.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号