共查询到20条相似文献，搜索用时 649 毫秒
1.
三向受压状态下地壳岩体的张性变形和张性破裂 总被引：2，自引：0，他引：2
本文叙述了处于三向受压状态的地壳岩体产生张性变形和张性破裂的原理,并以珠江三角洲地区为例说明:①岩体内应力集中点的浅部,可产生张性变形和张性破裂;②地质考察所观察到的张性或张剪性断裂,其断裂面上作用的正应力未必是拉应力,极有可能是压应力,但却一定是拉应变;③张性破裂引起的地震,震级较小,一般在4.5级以下,④地震引起的张性地裂缝的走向,就是震源应力场的主压应力方向。 相似文献
2.
用菲律宾海板块上7个站ITRF2000的速度建立了菲律宾海板块的整体旋转线性应变模型. 结果认为菲律宾海板块的现今运动是顺时针方向旋转，与NNR_NUVEL_1A估计的旋转方向一致，但与NNR_NUVE_1A估计的旋转极位置和旋转角速度有较大差别. 本文模型与Sella等建立的刚体运动模型相比能更精确地描述菲律宾海板块的现今构造运动与板内形变. 菲律宾海板块内部存在强烈的形变-应变场. 在板块上存在一致的向东形变，形变速率在中央构造线附近小，东、西边界附近大，南、北两端小，中部大，在Mariana弧上向东的形变速率达到484 mm/a. 板块上南北方向的形变，东、西部存在明显差别，东部的南北向形变速率很小，西部在Manila海沟附近南北向形变速率较大，北端向北的形变速率为113 mm/a，南端向南的形变速率为293 mm/a. 板块的中央构造线把板块的主应变场分为东、西两个区. 东区存在非常强烈的张应变，压应变则很弱. 主张应变为近东西方向，从中央构造线向东主张与主压应变率逐渐增加，板块东南边界附近（148°E，15°N）主张应变率最大为858×10-8/a. 在西区，存在很强的主压应变而主张应变则较弱，主压应变为NW-SE方向，主压与主张应变率呈现从中央构造向西逐渐增加的特征，在板块西北边界（122°E，23°N）附近，主压应变率最大为571×10-8/a. 菲律宾海板块主应变场的空间变化与板块内部及周围的构造背景密切相关，是构造应力场的反映. 相似文献
3.
传统板块构造理论认为板块是一个刚体，实际上板块是可变形的.板块内部几年到几十年时间尺度的变形主要是弹性变形,因此应当用弹性模型描述板块运动.推导了板块的弹性运动方程，由空间大地测量新的观测成果建立了菲律宾海、太平洋和澳大利亚板块的弹性运动模型.发现三个板块内部都存在明显的水平形变.板内应变场的空间变化有明显的规律：板块边界附近的应变率最大，从边界向内部逐渐减小；在板块扩散边界附近，主张应变率大于主压应变率，主张应变轴基本上与边界的扩张方向一致；在俯冲边界附近，主压应变率大于主张应变率，主压应变轴基本上与板块的俯冲方向一致；在走滑兼有俯冲性质的边界附近，最大剪应变的方向与边界断裂的走向基本一致.由GPS观测得到的主压应变轴与由震源机制解得到的主压应力轴方向具有很好的一致性.板内的应力－应变场基本上遵循广义胡克定律. 相似文献
4.
利用区域地震台网数字波形资料,对2017年9月23日朝鲜ML3.4地震进行地震矩张量反演计算与参数稳定性评估,获得了此次地震的震源机制解.结果表明,地震矩心深度为3 km,标量地震矩为1.34×1014 N·m,矩震级为MW3.4.地震矩张量结果分解后,双力偶分量（DC）为96.4%,补偿线性矢量偶极分量（CLVD）为-0.8%,震源体体积变化的各向同性分量（ISO）为-2.8%.主压应力P轴方位角为144°,倾角为74°,主张应力T轴方位角为341°,倾角为15°.其中一个节面的参数为：走向248°,倾向60°,滑动角-94°.地震震源体积变化分量很小,震源机制类型属于典型的由断层剪切位错引起的正断层型地震事件,且主张应力T轴方向与区域近地表应变率场方向一致.由于朝鲜2017年9月3日核试验释放的能量对局部区域应力场进行了扰动,致使核试验场附近地壳岩体处于破裂的临界状态,2017年9月23日朝鲜ML3.4地震事件可能是区域应力场作用下的一次山体滑动事件. 相似文献
5.
6.
Graham J. Borradaile 《Surveys in Geophysics》1997,18(4):405-436
We may use tectonic structures to confirm the primary age of a paleomagnetic remanence component but only if we know how to undo the natural strain history. It is normally insufficient to untilt fold limbs, as in the original version of Graham's Fold Test. One may need to remove also the bulk or local strain and account for strain heterogeneities, achieved by grain-strain and the more elusive intergranular flow. Most important, one must know the sequence of strains and tilts that occurred through geological history because the order of these noncommutative events critically affects the final orientation of the remanence component.In many non-metamorphic rocks, strain-rotation of a remanence component approximates a simple formula, although the actual rotation mechanism is complex. This simple, passive line approximation is confirmed experimentally for strains up to 45% oblate shortening. The passive line hypothesis has permitted successful paleomagnetic restorations in several natural case studies.Experimental deformation of samples with multicomponent remanences shows that differential stresses above a threshold value near 25 MPa selectively remove components with coercivities <25mT, due to domain wall rearrangements in large multidomain magnetite grains. Higher coercivity components are less reduced so that the net remanence vector spins always toward the high-coercivity component, at rates and along paths not predicted by any structural geological formula. Experimentally deformed samples with very fine hematite in the matrix showed their net remanence spinning away from the high coercivity component. This is due to easier mechanical disorientation of the very fine hematite grains, scattering their magnetic moments more and reducing their contribution to the overall remanence. Thus, muticomponent remanences have their components selected for survival based on rock-magnetic and microstructural criteria. Such stress-rotation by coercivity selection does not depend on the orientations of the principal stresses or strains, a concept that is counterintuitive to conventional structural geology.Syn-tectonic remagnetization is common in deformed sedimentary sequences and laboratory experiments reveal that a only moderate differential stress remagnetization is required to add components parallel to the ambient field, without significant strain. Alternating field demagnetization isolates components smeared along the great circle between the initial remanence direction and the remagnetizing field direction. In this case, the principal directions of the stress and finite strain tensors are irrelevant; remagnetization is triggered by a threshold differential stress. The final remanence direction is controlled by the ambient field direction and the remagnetization path lies along a great circle between the ambient field and the initial remanence direction. 相似文献
7.
“双向应变结构”是孕育和发生地震可能的供能、储能与放能的一种机制。它既能缓慢地储存弹性势能与重力势能而孕育地震,又能突然快速地释放弹性势能与重力势能而发生地震。由于地震发生时孕震体是(原应变的)应变逆转的自破裂过程,因此当初始破裂发生后,在破裂的前沿区,地震剪切应力在原有应力集中的基础上,还会再次产生一个突然快速增强(使破裂加速)到快速减弱(使破裂减速到停止)的过程,即产生“应变逆转破裂效应”。这样,不仅会大大增加地震破裂前沿区的剪切应力,而且还会大大减小破裂中的阻力,可能使地震发生中的断层强度佯谬得到解释。“双向应变结构”破裂发生地震的具体物理机制,印证了震源体断层运动的复杂性：既产生了剪切错动的破裂运动,又产生了单向的拉张与单向的压缩运动,同时还产生了整体的膨胀与整体的压缩运动。 相似文献
8.
A special experimental technique enabled us to study in detail seismic events on a fault model in a uniaxial stress field. The recording system used made it possible to investigate the radiation pattern for all the events observed including the precise determination of the dislocation origin.The aim of the present paper is (1) to find the relation between shear and tensile displacements, (2) to check a possible influence of the process of tensile crack generation on the seismic energy release and (3) to compare the seismic regime of a single fault before and after the tensile crack generation, respectively.Results prove the dominating importance of shear mechanism for the seismic energy release. The tensile displacement can be seismoactive only under special contact conditions on the fault plane.The existence of tensile cracks at the fault tips changed the pattern of seismic energy radiation. This feature is probably caused by subsequent changes in contact conditions on the fault plane and in the stress field around the fault.A comparison of some results of the present model experiments with the already published results of geological and seismological measurements and investigations shows the analogous character in laboratory and in nature of the process of tectonic earthquake preparation, the displacement course on the fault during the earthquake and the manner of seismic energy release on faults. 相似文献
9.
本文介绍了以激光全息干涉法观测单轴压缩下,大理岩岩样表面的变形位移场。全息干涉图可以反映出由于岩石内部微裂隙丛集激增所导致的变形局部化,实验采用板状大理岩试件,在中心处预制了不同角度的裂缝,实验在MTS伺服压机中加载直至宏观破坏,观测了裂隙的发展过程。实验表明:当裂缝角小于45时,先在裂缝尖端处的张应力集中部位出现新裂纹,它的起裂角(与原裂缝的交角)90,裂纹弯向压力方向并趋于稳定。当>45时,在上述张裂纹稳定后,在裂缝尖端附近再次发生张裂,其起裂角60,同样弯向压力方向后稳定。在这些前期张破裂稳定后,在张裂的相反方向,也即裂缝的共轭方向上,出现内部微裂隙的丛集,并随后发生宏观的剪破坏,我们认为此逆向剪切破坏与大理岩的多晶组构有关,与应变弱化过程中变形和应力的调整有关。 相似文献
10.
Based on the horizontal deformation field and the strain field derived from the GPS data over the period of 1999～2001 in the Yunnan area, the characteristics of deformation and strain in the northern part of Yunnan Province have been studied. The results indicate that the central part of the studied area is rather stable with little crustal displacement, while the western and eastern parts are active with larger displacement. The strain field reveals that the orientations of the principal compressive strain axis of the crust and the sub-blocks in the area are NW-SE, while the orientations of the principal tensile strain axis is NE-SW. In the studied area, the tensile strain is predominatly in the northern part and the compressive strain is predominatly in the central and southern parts. The stretching direction of the shear-strain contour is basically consistent with the strike of the active fault. The strain and stress fields of the fault activity are related to the structure where the fault is located, while the activity properties of the faults are different. 相似文献
11.
天山造山带构造环境复杂,活动断裂带和强震分布广泛,且主要分布于阿尔泰山、天山、西昆仑—帕米尔弧形构造带上,尤以天山地区最为集中.迄今为止,天山造山带地区的主要断裂带的活动特征与孕震应力场特征之间的动力学机理尚未有清晰的认识.本文以GPS等实际观测数据为约束,建立有限元数值模型,计算了研究区域地壳形变、应力/应变积累速率、弹性应变能密度以及库仑应力变化率等关键因素.模拟计算结果显示地表速度场与研究区域实际GPS观测值基本一致,且主要断裂带上弹性应变能密度分布与实际地震活动性也基本吻合,验证了数值模型和结果的可靠性.结合最新的观测和数值模拟结果分析发现,研究区的断层和地震活动性主要受控于近南北向的主压应力,与主要观测特征相一致.同时,帕米尔高原北部边界带—塔什库尔干断裂（TKF）、天山造山带南边界的东侧—迈丹断裂（MDF）、兴地断裂（XDF）库仑应力增大明显,在未来强震发生的可能性较高,应予密切关注. 相似文献
12.
13.
14.
15.
Crustal movement and deformation in Taiwan and its coastal area 总被引：1，自引：0，他引：1
Introduction Both Taiwan Island and Chinese mainland belong to Eurasian plate in geological structure. And the nearest distance between Taiwan Island and Fujian Province, which is located on the opposite coast, is only 130 km. Although there are high-precision GPS networks in both Taiwan and Fujian Province, joint GPS measurement cannot be made directly because of the inconvenient contact due to the strait between them. However, the GPS networks arranged on b… 相似文献
16.
—Uniaxial compression, triaxial compression and Brazialian tests were conducted on several kinds of rock, with particular attention directed to the principal tensile strain. In this paper we aim to clarify the effects of the experimental environment—such as confining pressure, loading rate, water content and anisotropy—on the critical tensile strain, i.e., the measured principal tensile strain at peak load.¶It was determined that the chain-type extensometer is a most suitable method for measuring the critical tensile strain in uniaxial compression tests. It is also shown that the paper-based strain gage, whose effective length is less than or equal to a tenth of the specimen’s diameter and glued on with a rubber-type adhesive, can be effectively used in the Brazilian tests.¶The effect of confining pressure P C on the critical tensile strain ? TC in the brittle failure region was between ?0.02 × 10?10 Pa?1 and 0.77 × 10?10 Pa?1. This pressure sensitivity is small compared to the critical tensile strain values of around ?0.5 × 10?2. The strain rate sensitivities ?? TC /?{log(d|?|/dt)} were observed in the same way as the strength constants in other failure criteria. They were found to be from ?0.10 × 10?3 to ?0.52 × 10?3 per order of magnitude in strain rate in the triaxial tests. The average magnitude of the critical tensile strain ? TC increased due to the presence of water by 4% to 20% for some rocks, and decreased by 22% for sandstone. It can at least be said that the critical tensile strain is less sensitive to water content than the uniaxial compressive strength under the experimental conditions reported here. An obvious anisotropy was observed in the P-wave velocity and in the uniaxial compressive strength of Pombetsu sandstone. It was not observed, however, in the critical tensile strain, although the data do show some variation.¶A "tensile strain criterion" was proposed, based on the above experimental results. This criterion signifies that stress begins to drop when the principal tensile strain reaches the critical tensile strain. The criterion is limited to use within the brittle failure region. The critical tensile strain contains an inelastic strain component as well as an elastic one. It is affected by the strain rate, however, it is relatively insensitive to the confining pressure, the presence of water and anisotropy. 相似文献
17.
A smeared crack approach has been proposed to model the static and dynamic behavior of mass concrete in three‐dimensional space. The proposed model simulates the tensile fracture on the mass concrete and contains pre‐softening behavior, softening initiation, fracture energy conservation and strain rate effects under dynamic loads. The validity of the proposed model has been checked using the available experimental results under static and dynamic loads. The direct and indirect displacement control algorithms have been employed under incremental increasing static loads. It was found that the proposed model gives excellent results and crack profiles when compared with the available data under static loads. The Koyna Dam in India has been used to verify the dynamic behavior of the proposed model. It was found that the resulting crack profiles were in good agreement with the available experimental results. Finally, the Morrow Point Dam was analyzed, including the dam–reservoir interaction effects, to consider its non‐linear seismic behavior. It was found that the resulting crack profiles were in good agreement with the contour of maximum principal stresses and no numerical instability occurred during the analysis. Copyright © 2004 John Wiley & Sons, Ltd. 相似文献
18.
19.
2008年5月12日四川省汶川县发生了MS8.0强烈地震.发震断层是龙门山断裂带的映秀—北川断裂.分析震前的GPS速度场发现,从巴颜喀拉块体西部到龙门山断裂带沿大约N103°E方向的缩短速率为13.0 mm/a,龙门山断裂带的右旋走滑速率1.1 mm/a,断裂带处于闭锁状态.四川盆地沿大约N103°E方向有少量的压缩变形,而沿SW方向有少量的拉张变形.同震位移场显示,这次地震可能是巴颜喀拉块体SE向逆冲与四川盆地NW向俯冲同时发生的.应变场分析发现,震前震中区的主压与主张应变率分别为-30.840×10-9/a与13.956×10-9/a,主压应变轴N105.4°E与震源机制解得到的主压应力轴的方向N103°E一致.由本文提出的应力-应变机制得到的断层滑动方向和走向与地表破裂调查和震源机制解得到的结果一致.印度、太平洋和菲律宾海板块与欧洲板块的相互作用是龙门山断裂带积累弹性应变能和孕育汶川地震的长期作用力.苏门达腊大地震使青藏高原和华南块体的相互作用加强,促进了汶川地震的发生. 相似文献
20.
2008年3月21日新疆于田发生MS7.3级地震,2014年2月12日于田再次发生MS7.3级地震,两次地震相距约110 km.但是,前者震源机制为正断层,后者震源机制为左旋走滑断层.为进一步探讨这两次地震的孕育应力环境、发震机制及其动力学成因,本文进行三维有限元数值试验分析,计算了该区域在GPS约束条件下的速度场、应力和应变场变化,并与实际观测资料进行对比.数值计算得到的区域内几条主要大的走滑断层错动性质,与实际地质观察到的断层左旋或右旋性质吻合,验证了计算结果的可靠性.结果表明于田及其临近区域整体上处于北东-南西向挤压和北西-南东向拉张状态.在GPS速度约束条件下,2008年于田地震震中区域最大主张应变率大于最大主压应变率,处于以拉张为主的应力状态,NE走向断层受到北东-南西方向的拉应力作用,从而形成正断层;2014年于田地震处于拉张应变率与压应变率几乎一致的区域,NEE走向断层在NE-SW主压应力和NW-SE主张应力作用下发生左旋走滑. 相似文献