共查询到20条相似文献，搜索用时 78 毫秒
1.
CHARACTERISTICS OF TECTONIC STRESS FIELD OF THE XIAOWAN RESERVOIR BEFORE AND AFTER THE IMPOUNDMENT 
下载免费PDF全文
下载免费PDF全文 Using the seismic waveform data of Xiaowan seismic network and Yunnan seismic network, we determined the focal mechanisms of 36 earthquakes(ML ≥ 3.0)from Jun. 2005 to Dec. 2008 and 51 earthquakes(ML ≥ 2.5)from Jan. 2009 to Dec. 2015 by generalized polarity and amplitude technique.
We inverted tectonic stress field of the Xiaowan reservoir before impounding, using the focal mechanisms of 36 earthquakes(ML ≥ 3.0)from Jun. 2005 to Dec. 2008 and CAP solutions of 58 earthquakes(ML ≥ 4.0)collected and the solutions in the Global Centroid Moment Tensor(GCMT)catalog; We inverted local stress field of the reservoir-triggered earthquake clustering area, using 51 earthquakes(ML ≥ 2.5)from Jan. 2009 to Dec. 2015.
Focal mechanisms statistics show that, the Weixi-Qiaohou Fault is the seismic fault. Focal mechanisms were strike-slip type in initial stage, but normal fault type in later stage. Focal depths statistics of 51 earthquakes(ML ≥ 2.5)show that, the average value of focal depths in period Ⅰ, period Ⅱ and period Ⅲ are 8.2km, 7.3km and 7.8km respectively and the standard deviations are 4.3km, 3.5km and 6.0km respectively. The average value of focal depths is basically stable in different period, only the standard deviation is slightly different. Therefore, there is not positive connection between focal depth and deviation of focal mechanisms. What's more, there are 2 earthquakes(number 46 and number 47 in Fig.5 and Table 3)with almost the same magnitude, epicenter and focal depth, but they have different faulting types as normal and strike-slip. The focal mechanism of event No.46 is strike:302°, dip:40° and rake:-97° for plane Ⅰ, however, the focal mechanism of event No.47 is strike:292°, dip:82° and rake:140° for plane Ⅰ. Likewise, earthquake of number 3 and number 18 have similar characteristic. Therefore, the obvious focal mechanism difference of similar earthquake pair indicates the complexity of Weixi-Qiaohou Fault.
Considering the quiet-active character of reservoir-triggered earthquakes, we discussed the change of local stress field in different period. The σ1 of tectonic stress field was in the near-south direction, with a dip angle of 14° before the impoundment, however, the direction of σ1 of local stress field changed continuously, with the dip angle getting larger after the impoundment. The direction of σ1 of local stress field of reservoir-triggered earthquake clustering area is close to the strike of Weixi-Qiaohou Fault, and reservoir impoundment increased the shear stress in the fault, so the weakening of fault was beneficial to trigger earthquakes. Comprehensive analysis suggests that fluid permeation and pore pressure diffusion caused by the water impounding, and the weakening of fault caused by local stress field are the key factors to trigger earthquake in the Xiaowan reservoir. 相似文献
2.
Many small earthquakes occurred intensively and continuously and formed an earthquake sequence after the ML3.8 earthquake happened at Rushan County, Shandong Province on October 1, 2013. Up to March, 2017, more than 13 000 events have been recorded, with 3 429 locatable shocks, of which 31 events with ML ≥ 3.0. This sequence is rarely seen in East China for its extraordinary long duration and the extremely high frequency of aftershocks. To track the developing tendency of the earthquake sequence accurately, 20 temporary seismometers were arranged to monitor the sequence activities around the epicenter of the sequence since May 6, 2014. Firstly, this paper adopts double difference method to relocate the 1 418 earthquakes of ML ≥ 1.0 recorded by temporary seismometers in the Rushan earthquake sequence (May 7, 2014 to December 31, 2016), the result shows that the Rushan earthquake sequence mainly extends along NWW-SEE and forms a rectangular activity belt of about 4km long and 3km wide. In addition, the seismogenic fault of Rushan earthquake sequence stretches along NWW-SEE with nearly vertical strike-slip movement and a small amount of thrust component. Then we apply the P-wave initial motion and CAP to invert the focal mechanism of earthquakes with ML ≥ 1.5 in the study area. The earthquakes can be divided into several categories, including 3 normal fault earthquakes (0.9%), 3 normal-slip earthquakes (0.9%), 229 strike-slip earthquakes (65.8%), 18 thrust fault earthquakes (5.2%), 37 thrust-slip earthquakes (10.6%)and 58 undefined (16.6%). Most earthquakes had a strike-slip mechanism in Rushan (65.8%), which is one of the intrinsic characteristics of the stress field. According to the focal mechanism solutions, we further utilized the LSIB method (Linear stress inversion bootstrap)to invert the stress tensor of Rushan area. The result shows that the azimuth and plunge of three principal stress (σ1, σ2, σ3) axes are 25°, 10°; 286°, 45°; 125°, 43°, respectively. Based on the stress field inversion results, we calculated the focal mechanism solutions consistency parameter (θ)and the angle (θ1)between σ1 and P axis. The trend lines of θ and θ1 were relatively stable with small fluctuation near the average line over time. Furthermore, the earthquake sequence can be divided into three stages based on θ and θ1 values. The first stage is before September 16, 2014, and the variation of the θ and θ1 values is relatively smooth with short period. All focal mechanism solutions of the three ML ≥ 3.0 earthquakes exhibited consistence. The second stage started from September 16, 2014 to July 1, 2015, the fluctuation range of θ and θ1 values is larger than that of the first stage with a relative longer period. The last stage is after July 1, 2015, values of θ and θ1 gradually changed to a periodic change, three out of the four ML ≥ 3.0 earthquakes (strike-slip type)displayed a good consistency. Spatially, earthquakes occurred mainly in green, yellow-red regions, and the focal mechanism parameters consistency θ was dominant near the green region (around the average value), which presents a steady state, and the spatial locations are concordant with the distribution of θ value. Moreover, all of ML ≥ 3.0 earthquakes are located in the transitional region from the mean value to lower value area or region below the mean value area, which also indicates the centralized stress field of the region. 相似文献
3.
FOCAL MECHANISM AND SEISMOGENIC STRUCTURE OF THE M5.0 YUEXI EARTHQUAKE ON 1 OCT. 2014, SOUTHWESTERN CHINA 下载免费PDF全文
下载免费PDF全文 The Oct.1,2014 M5.0 Yuexi earthquake occurred on the Daliang Shan fault zone where only several historical moderate earthquakes were recorded.Based on the waveform data from Sichuan regional seismic network,we calculated the focal mechanism solution and centroid depth of the M5.0 Yuexi earthquake by CAP (Cut and Paste) waveform inversion method,and preliminarily analyzed the seismogenic structure.We also calculated the apparent stress values of the M5.0 earthquake and other 14 ML≥4.0 events along the Shimian-Qiaojia fault segment of the eastern boundary of the Sichuan-Yunnan block.The result indicates that the parameters of the focal mechanism solution are with a strike of 256°,dip of 62°,and slip of 167° for the nodal plane Ⅰ,and strike of 352°,dip of 79°,and slip of 29° for the nodal plane Ⅱ.The azimuth of the P axis is 121° with dip angle of 11°,the azimuth of T axis is 217° with dip angle of 28°,and the centroid depth is about 11km,and moment magnitude is MW5.1.According to the focal mechanism solution and the fault geometry near the epicenter,we infer that the seismogenic fault is a branch fault,i.e.,the Puxiong Fault,along the central segment of the Daliang Shan fault zone.Thus,the nodal plane Ⅱ was interpreted as the coseismic rupture plane.The M5.0 Yuexi earthquake is a strike-slip faulting event with an oblique component.The above findings reveal the M5.0 Yuexi earthquake resulted from the left-lateral strike-slip faulting of the NNW Dalang Shan fault zone under the nearly horizontal principal compressive stress regime in an NWW-SEE direction.The apparent stress value of the Yuexi earthquake is 0.99MPa,higher than those of the ML ≥ 4.0 earthquakes along the eastern boundary of the Sichuan-Yunnan block since 2008 Wenchuan M8.0 earthquake,implying a relatively high stress level on the seismogenic area and greater potential for the moderate and strong earthquake occurrence.It may also reflect the current increasing stress level of the entire area along the eastern boundary,and therefore,posing the risk of strong earthquakes there. 相似文献
4.
Using the seismic waveform data recorded by regional seismic network of Yunnan and Sichuan and the method of CAP, we calculate and obtain the focal mechanism of 268 earthquakes with the magnitude of ML≥4.0 occurring in Yunnan during Jan. 1999 to Aug. 2014; then, we analyze the types and the regional feature of the focal mechanism of earthquakes in Yunnan, on the basis of the focal mechanism of 109 earthquakes analyzed by Harvard University. Based on the data of the above focal mechanism solutions, we adopt the method of damped regional-scale stress inversion to calculate the best-fitting tectonic stress tensor of every grid in Yunnan; and adopt the method of maximum principal stress to calculate the direction of maximum horizontal principal stress in Yunnan. The result shows that: (1)the strike-slip type is the most principal type of the earthquake focus in the study area and the second is the normal faulting type; while, the reverse-fault type is relatively small. The spatial distribution of focal mechanism is obvious. This reflects that the dynamic source and acting force are different in different parts of the study area. (2)The direction of the stress field in Yunnan shows a certain spatial continuity. Maximum horizontal principal compressive stress is mainly clockwise from north to south and counterclockwise from the west to the east. The direction of stress field shows inhomogeneity in space. There exist two stress conversion zones respectively in EW and NS direction. The inversion result of stress field shows that the stress field in Yunnan is complex and the principal stress direction changes greatly; and there are obvious differences in different regions. 相似文献
5.
针对2008年8月30日在四川攀枝花-会理发生的Ms6.1地震序列,本研究基于四川和云南两省数字地震台网的宽频带波形记录,采用CAP方法反演了该序列主震及ML≥4.0余震的震源机制解.结果显示:主震震源机制解的两个主应力轴仰角小于10°,其中,主压力轴方位为140°;节面之一走向185°、西倾83°、滑动角5°,显示左旋走滑略兼逆冲分量的断层作用性质.结合余震、烈度分布以及震区的活动构造,判定该节面代表了主震的发震断层面,相应的发震断层应是穿越震区的近南北向红格断裂(南段).本研究还获得主震震源机制解的最佳拟合误差深度为10 km,与该事件的定位结果相一致.该序列中6次ML≥4.0余震也具有与主震类似的震源机制解.分析初步表明:空间上,2008年攀枝花-会理Ms6.1地震序列的震源机制解与研究区内更早地震的震源机制解具有良好的协调性,反映了该序列是在川滇地块SE-SSE向水平运动的背景下、沿近S-N向红格断裂发生左旋走滑略兼逆冲运动的结果. 相似文献
6.
基于中国国家和四川区域数字地震台网记录,采用HypoDD方法精确定位了四川芦山ML2.0级以上地震序列的震源位置,采用CAP方法反演了36次ML4.0级以上地震的最佳双力偶震源机制解,并利用小震分布和区域应力场拟合了可能存在的发震断层面参数,从而综合分析了芦山地震序列的震源深度、震源机制和震源破裂面特征,探讨可能的发震构造.结果显示,7.0级主震的震源位置为30.30°N、102.97°E,初始破裂深度为15 km左右,震源矩心深度为14 km左右,最佳双力偶震源机制解的两组节面分别为走向209°/倾角46°/滑动角94°和走向23°/倾角44°/滑动角86°,可视为纯逆冲型地震破裂,绝大多数ML4.0级以上余震的震源机制也表现出与主震类似的逆冲破裂特征.ML2.0级以上余震序列发生在主震两侧,集中分布的长轴为30 km左右,震源深度主要集中在5～27 km,ML3.5级以上较大余震则集中分布在9～25 km的深度上,并揭示出发震断层倾向北西的特征.利用小震分布和区域应力场拟合得到发震断层参数为走向207°/倾角50°/滑动角92°,绝大多数余震发生在断层面附近10 km左右的区域.综合地震序列分布特征、主震震源深度和已有破裂过程研究结果,可以推测主震破裂过程自初始点沿断层的两侧扩展破裂,南侧破裂比北侧稍长,滑动量主要集中在初始破裂点附近,可能没有破裂到地表.综合本文研究成果、地震烈度分布和现有的科学考察结果,初步推测发震构造为龙门山山前断裂,也不排除主震震中东侧还存在一条未知的基底断裂发震的可能性. 相似文献
7.
8.
STUDY ON THE SEISMOGENIC FAULT AND DYNAMICS PARAME-TERS OF THE 2014 MS6.6 JINGGU EARTHQUAKE IN YUNNAN 下载免费PDF全文
下载免费PDF全文 On October 17, 2014, a MS6.6 earthquake occurred in Jinggu, Yunnan. The epicenter was located in the western branch of Wuliang Mountain, the northwest extension line of Puwen Fault. There are 2 faults in the surrounding area, one is a sinistral strike-slip and the other is the dextral. Two faults have mutual intersection with conjugate joints property to form a checkerboard faulting structure. The structure of the area of the focal region is complex. The present-day tectonic movement is strong, and the aftershock distribution indicates the faulting surface trending NNW. There is no obvious surface rupture related to the known fault in the epicenter, and there is a certain distance from the surface of the Puwen fault zone. Regional seismic activity is strong. In 1941, there were two over magnitude 7.0 earthquakes in the south of the epicenter of Jinggu County and Mengzhe Town. In 1988, two mainshock-aftershock type earthquakes occurred in Canglan-Gengma Counties, the principal stress axes of the whole seismic area is in the direction of NNE. Geological method can be adopted to clarify the distribution of surficial fracture caused by active faults, and high-precision seismic positioning and spatial distribution characteristics of seismic sequences can contribute to understand deep seismogenic faults and geometric features. Thus, we can better analyze the three-dimensional spatial distribution characteristics of seismotectonics and the deep and shallow tectonic relationship. The focal mechanism reveals the property and faulting process to a certain extent, which can help us understand not only the active property of faults, but also the important basis for deep tectonic stress and seismogenic mechanism. In order to study the fault characteristic of the Jinggu earthquake, the stress field characteristics of the source area and the geometric parameters of the fault plane, this paper firstly uses the 15 days aftershock data of the Jingsuo MS6.6 earthquake, to precisely locate the main shock and aftershock sequences using double-difference location method. The results show that the aftershock sequences have clustering characteristics along the NW direction, with a depth mainly of 5~15km. Based on the precise location, calculations are made to the focal mechanisms of a total of 46 earthquakes including the main shock and aftershocks with ML ≥ 3.0 of the Jinggu earthquake. The double-couple(DC)component of the focal mechanism of the main shock shows that nodal plane Ⅰ:The strike is 239°, the dip 81°, and the rake -22°; nodal plane Ⅱ, the strike is 333°, the dip 68°, and the rake -170.31°. According to focal mechanism solutions, there are 42 earthquakes with a focal mechanism of strike-slip type, accounting for 91.3%. According to the distribution of the aftershock sequence, it can be inferred that the nodal plane Ⅱ is the seismogenic fault. The obtained focal mechanism is used to invert the stress field in the source region. The distribution of horizontal maximum principal stress orienation is concentrated. The main features of the regional tectonic stress field are under the NNE-SSW compression(P axis)and the NW-SE extension(T axis)and are also affected by NNW direction stress fields in the central region of Yunnan, which indicates that Jinggu earthquake fault, like Gengma earthquake, is a new NW-trending fault which is under domination of large-scale tectonic stress and effected by local tectonic stress environment. In order to define more accurately the occurrence of the fault plane of the Jinggu earthquake, with the precise location results and the stress field in the source region, the global optimal solution of the fault plane parameters and its error are obtained by using both global searching simulated annealing algorithm and local searching Gauss-Newton method. Since the parameters of the fault plane fitting process use the stress parameters obtained by the focal mechanism inversion, the data obtained by the fault plane fitting is more representative of the rupture plane, that is, the strike 332.75°, the dip 89.53°, and the rake -167.12°. The buried depth of the rupture plane is 2.746km, indicating that the source fault has not cut through the surface. Based on the stress field characteristics and the inversion results of the fault plane, it is preliminarily believed that the seismogenic structure of the Jinggu earthquake is a newly generated nearly vertical right-lateral strike-slip fault with normal component. The rupture plane length is about 17.2km, which does not extend to the Puwen fault zone. Jinggu earthquake occurred in Simao-Puer seismic region in the south of Sichuan-Yunnan plate. Its focal mechanism solution is similar to that of the three sub-events of the Gengma earthquake in November 1988. The seismogenic structure of both of them is NW-trending and the principal stress is NE-SW. The rupture plane of the Jinggu main shock(NW direction)is significantly different from the known near NS direction Lancang Fault and the near NE direction Jinggu Fault in the study area. It is preliminarily inferred that the seismogenic structure of this earthquake has a neogenetic feature. 相似文献
9.
利用双差定位方法对2018年松原MS5.7地震序列中ML≥1.0地震重新定位，之后使用CAP方法求解松原MS5.7地震序列中强地震的震源机制解，再借助MSATSI软件包反演得到松原地区的区域应力场。综合分析以上研究结果得到如下结论:① 松原MS5.7地震序列发生在NW走向的第二松花江断裂与NE走向的扶余—肇东断裂交会处，将地震精定位结果沿两条断层走向作剖面分析，NW向剖面主轴长度约为5 km，震中分布均匀，NE向剖面主轴长度亦约为5 km，震中呈倾向NE的高倾角分布；② 该序列中的4次ML≥3.7地震的震源机制解具有良好的一致性:节面Ⅰ走向为NE向，节面Ⅱ走向为NW向，均为高倾角走滑断层。中强地震的震源机制节面解与第二松花江断裂性质基本一致，由此推断第二松花江断裂是本次松原地震的发震断层；③ 松原地区的主压应力方位角为N86°E，倾角为7°，主张应力方位角为N24°E，倾角为71°。松原地区的区域应力场既受到大尺度的板块构造运动的控制，又受到区域构造运动的影响。在太平洋板块对北东亚板块向西俯冲作用下，东北地区产生了近EW向的主压应力，受周边地质构造控制，松辽盆地内NE向断裂与NW向断裂交会处易发生走滑型地震，2018年松原MS5.7地震正是在这种构造作用控制下发生的中强地震。 相似文献
10.
QI Yu-ping ZHANG Zhi-wei LONG Feng XIAO Ben-fu LIANG Ming-jian LU Qian JIANG Peng 《地震地质》2018,40(2):377-395
The Daliangshan sub-block is a boundary region among the Bayan Har block, the Sichuan-Yunnan block and the South China block. It hosts four major fault systems:The southwest to south trending Xianshuihe-Zemuhe Fault zone in the west, the Longmenshan fault zone is the northern boundary, the Zhaotong-Lianfeng fault zone in the south, and the NS-trending Mabian-Yanjin fault zone in the east. This study focused on focal mechanisms and the regional stress field of the Daliangshan sub-block to help understand the earthquake preparation process, tectonic deformation and seismic stress interaction in this area. We collected broadband waveform records from the Sichuan Seismic Network and used multiple 1-D velocity models to determine the focal mechanisms of moderate and large earthquakes(ML ≥ 3.5)in the Daliangshan sub-block by using the CAP method. Results for 276 earthquakes from Jan 2010 to Aug 2016 show that the earthquakes are dominated by strike-slip and trust faulting, very few events have normal faulting and the mixed type. We then derived the regional distribution of the stress field through a damp linear inversion(DRSSI)using the focal mechanisms obtained in this study. Inversion results for the spatial pattern of the stress field in the block suggest that the entire region is predominantly under strike-slip and trust faulting regimes, largely consistent with the focal mechanisms. The direction of maximum compression axes is NW-NWW, and part of the area is slightly rotated, which is consistent with the GPS velocity field. Combining geodynamic background, this work suggests that because the Sichuan-Yunnan block is moving to SE and the Tibetan plateau to SE-E along major strike-slip faults, the stress field of the Daliangshan sub-block and its adjacent regions is controlled jointly by the Bayan Har block, the Sichuan-Yunnan block and the South China block. 相似文献
11.
安徽淮河构造变形带及邻近块体现代构造应力场特征 总被引：3，自引：1，他引：3
针对安徽省较特殊的构造环境及历史地震分布特点，利用直达波最大振幅比和系统聚类分析方法，在对安徽淮河中游区1974年以来近百个中小地震震源机制反演、聚类及空间合成的基础上，分析了华北断块南缘的安徽淮河构造变形带及邻近块体震源断层滑动方式、构造应力场分布及块体运动方式、应力场随时间变化等。结果显示：淮河构造变形带及其邻近块体上震源断层总体上以近走滑型或斜滑型破裂为主，但倾滑型破裂也占一定比例；该地区构造应力以水平作用为主，但也存在一定的垂向作用。其中淮北和皖中块体仍可能分别向SWW和NEE方向运动，并在淮河构造变形带上产生左旋剪切作用，呈现一定的继承性活动特征；各块(带)上主压应力P轴走向随时间的变化在总体上较为一致，而各时段之间P轴方位存在一定差异，显示安徽淮河中游区受华北和华南应力场的共同作用，但其地震活动可能主要受控于华北应力场。 相似文献
12.
利用hypo2000和hypoDD程序对滇东南弧形构造带1990—2011年间的小震进行了重新定位和精定位;精定位后水平误差≤1.4km,垂直误差≤1.9km。在此基础上,根据P珔波和S珔波最大振幅比法,得到区内2007—2012年间148个小震的震源机制解。研究表明,正-走滑滑动性质的节面数几乎为逆-走滑的2倍,显示该区现今构造活动以正-走滑性质为主。根据精定位后的小震震源深度剖面特征,曲江断裂、石屏-建水断裂倾向SW,红河断裂倾向NE,与该地区地壳速度结构剖面所反映的断裂几何学特征一致。在大陆动力学背景上,苏门答腊-缅甸海沟的回拉效应影响边界可能已经沿NEE方向深入到曲江断裂和石屏-建水断裂,而川滇块体SSE向的推挤作用在滇东南弧形构造带可能已居于次要地位,与SSE-NNW向的挤压作用相比,SWW-NEE向的拉张效应在滇东南现今构造活动中起着更重要的作用。这样的构造动力学背景与小震震源参数的总体特征所反映的构造力学环境也是一致的,滇东南弧形构造带可能是一个正在形成的张-剪性构造区。 相似文献
13.
In recent years, there have been few researches and analysis published on the seismic activity and stress state in Shandong segment of Tanlu fault zone using digital seismological methods such as seismic apparent stress, focal mechanism solution and so on. In this paper, source parameters such as focal mechanism solutions and apparent stress are calculated using the waveform data of ML≥1 moderate-small earthquakes in Shandong segment of Tanlu fault zone recorded by Shandong digital seismic network since 2007. According to focal mechanism solutions, a statistical analysis is done on the focal dislocation types in the study area using triangle graphical method, and the results show that the faulting in this area is mainly of strike-slip mechanism, and there are less thrust and normal mechanism. Calculation with the mean stress tensor method illustrates that the direction of mean principle stress of Shandong segment of Tanlu fault zone is NEE-SWW, which is the result of the combined effect of the subduction of West Pacific plate and the extrusion of Indian plate to Eurasian plate; the small dip angle indicates that the mode of action of stress is nearly horizontal, and the direction of principal stress axis is nearly perpendicular to the Tanlu fault zone. Under the action of such compressive stress field, dislocation is not likely to occur and the stress accumulation is enhanced on both sides of the fault. The apparent stress is calculated using the source spectral parameters method. Apparent stress has positive correlation with the magnitude and increases with the increased magnitude. So we get apparent stress difference by subtracting the empirical fitting value from the apparent stress. By removing the impact of magnitude, and according to the temporal-spatial evolution image of apparent stress difference, we found that the apparent stress in Shandong segment of Tanlu fault zone generally has a trend of decrease starting from the Wenchuan earthquake in 2008, and the spatial distribution of apparent stress in the region is very uneven. Combined with the spatial distribution of b values, the result shows that high stress is mainly located in Anqiu segment and Tancheng-Juxian segment, especially in Anqiu segment where small magnitude earthquakes appeared accompanying with the high stress. Low b-value means high stress and low frequency means low stress release, which indicates that Anqiu segment might accumulate higher stress and is at the fault locking stage. The research will provide new data for better understanding the present active feature and stress state of the Shandong segment of the Tanlu fault zone. 相似文献
14.
PRELIMINARY APPLICATION OF FOCAL MECHANISM SOLUTIONS OF SMALL AND MEDIUM-SIZE EARTHQUAKES TO FAULT STABILITY ANALYSIS IN THE SOUTHEASTERN TIBETAN PLATEAU 下载免费PDF全文
下载免费PDF全文 Analysis of stress state of faults is helpful to understand crustal mechanical properties and seismicity. In the paper, we invert the horizontal crustal stress field in the southeastern Tibetan plateau using focal mechanism solutions of small and medium-size earthquakes, and apply them to estimate the stability of regional major faults.
Firstly, we collect focal mechanism solutions of small and medium-sized earthquakes in the southeastern Tibetan plateau. The dataset includes more than 1 000 focal mechanism solutions in the past twenty years. Magnitudes of these earthquakes vary from M3.0 to M6.0. Most of the focal mechanism solutions were determined using waveform inversion technique. Although most of focal mechanism solutions in the southeastern Tibetan plateau are strike-slip faulting, their spatial pattern is different in sub-regions. Normal faulting earthquakes mainly occurred in the western Sichuan region, reverse faulting earthquakes mainly occurred in the boundary zone between the Tibetan plateau and the South China craton, and strike-slip faulting earthquakes mainly occurred in the central and southern Yunnan region.
Next, we settle on a mesh with grid spacing of 0.5° in longitude and latitude in the region and invert the horizontal crustal stress field at each grid point. Spatial variation of the maximum principal stress axis in the southeastern Tibetan plateau shows a clockwise rotation around the eastern Himalaya syntax. The azimuth of maximum compressional stress axis is about 88.1° in the western Sichuan region, about 124.6° in the South China craton, and about 21.6° in the western and southern Yunnan region. The azimuth of regional maximum compressional stress is nearly parallel to the direction of terrain elevation gradient, and that of the minimum compressional stress is nearly parallel to the tangential direction of the topographic elevation contours. The spatial pattern reflects the control role of gravity spreading of the Tibetan plateau on the regional horizontal stress field.
Finally, we analyzed regional fault stability based on these collected focal mechanism solutions. The fault instability parameter (I) is defined based on the Mohr-Coulomb criterion and indicates the degree of fault approximating to rupture. The instability parameters on fourteen major faults in the southeastern Tibetan plateau were calculated. Our results show that the stability of the Lianfeng-Zhaotong Fault is the lowest before 2014 in the region, which indicates the fault zone is close to rupture at that time. Our results provide a new useful tool to assess regional seismic potential using dense focal mechanism solutions. 相似文献
15.
采用前人反演得到的云南禄劝地震的地震矩张量和主震及部分余震的震源机制解,以该主震震中为中心在全球CMT目录中查询到的部分地震的震源机制解,先将地震矩张量转化为震源机制解,运用精细网格搜索反演方法将震源机制解反演得到禄劝地震和其周边地区的应力场。对反演得出的两个应力场进行差异性对比研究,结果表明禄劝地震震源处主压应力场为NNW—SSE向,主压应力与主张应力相当,周边地区的主压应力方向为NW—SE,断层破裂面倾角大,以走滑正断层为主,主压应力占优势。但是由于云南地区主要由NNW—SSE和NW—SE方向的主压应力控制,并受本文所选的周边地区的经纬度及所处地区的控制,所以该区域在总体上受NW—SE方向的压应力控制,局部地区受NNW—SSE方向的压应力控制。该结果可以用来分析该地区的地震地质背景和断层形成条件,对地球动力环境的研究有一定的意义。 相似文献
16.
基于搜集到的2000—2018年滇西北地区MS≥3.0地震的震源机制解,运用线性叠加反演法进行应力场反演,分析了滇西北地区现今的构造应力状态,进一步探讨了应力张量方差的时空分布与地震活动的关系。结果显示:① 滇西北地区地震的震源机制解类型复杂,主要以走滑型（46%）为主,正断型（27%）次之;② 研究区的构造应力场具有整体的一致性和局部的非均匀性,呈现为NNW向挤压和ENE向拉张的走滑型应力结构,说明研究区受到来自NNW向的水平挤压作用,对该地区上地壳运动和断裂活动起主导作用;③ 滇西北地区的应力张量方差大都小于0.2,除北部一些地区外,应力场基本处于均匀状态。根据应力张量方差随时间的变化和后续地震可知,中强地震大都发生在应力张量方差值低于0.2的情形,且主要发生在应力张量方差减小即震源机制解趋于一致的过程中。空间上这些地震基本都发生在应力张量方差的低值分布区及其边缘,这一结果有助于判定发震地点和了解区域应力集中增强过程。 相似文献
17.
南北地震带作为中国大陆地应力场一级分区的边界,其构造应力场的研究对理解大陆强震机理、构造变形和地震应力的相互作用具有重要意义.本文收集南北地震带1970—2014年的震源机制解819条,按照全球应力图的分类标准对震源机制解进行分类,发现其空间分布特征与地质构造活动性质比较吻合.P轴水平投影指示了活动块体的运动方向,T轴水平投影在川滇块体及邻近地区空间差异特征最为突出,存在顺时针旋转的趋势.南北地震带的最大水平主应力方向具有明显的分区特征,北段为NE向走滑类型的应力状态,中段为NEE—EW—NWW向的逆冲类型,南段为SE—SSE—NS—NNE向走滑和正断类型,在川滇块体的北部和西边界应力状态为EW—SE—SSE的正断层类型,表明来自印度板块的NNE或NE向的水平挤压应力和青藏高原物质东向滑移沿大型走滑断裂带向SE向平移的复合作用控制了南北地震带的岩石圈应力场.川滇块体西边界正断层类型应力状态范围与高分辨率地震学观测得到的中下地壳低速带范围基本吻合,青藏高原向东扩张的塑性物质流与横向边界(丽江—小金河断裂带)的弱化易于应变能的释放,在局部地区使NS向拉张的正断层向EW向拉张正断层转变.反演得到的应力状态基本上与各种类型地震的破裂方式比较吻合,也进一步验证反演结果的可靠性,可为地球动力学过程的模拟和活动断层滑动性质的厘定提供参考. 相似文献
18.
On 16th September 2013, an M5.1 earthquake occurred in Badong County, Hubei Province, which is the biggest one since the first water impounding in 2003 in the head region of the Three Gorges Reservoir area. The crustal velocity information is needed to determine the earthquake location and focal mechanism. By comparison, the 1-D velocity structure model from Zhao was adopted in this study. Double difference location method was applied to determine the precise locations of the M5.1 earthquake sequence. Relocation results show that the dominant distribution of this sequence is along NEE direction. In order to understand its seismogenic structure, focal depth profiles were made. Profile AA' was along the sequence distribution, and the earthquake sequence extended about 12km. Focal depth of mainshock is deeper than that of aftershocks, and earthquake rupture propagated laterally southwestward. The seismic profile BB' and CC' were perpendicular to profile AA', which represent the dip direction. Both profiles show that the focal depth becomes deeper toward southeast, and dip angle is about 50°. It means that the possible seismogenic fault strikes NEE and dips southeast. Focal mechanism could provide more information for judging the seismogenic structures. Many methods could obtain the focal mechanism, such as P-wave first motion method, CAP method, and some other moment tensor methods. In this paper, moment tensor inversion program made by Yagi Y is adopted. 12 regional seismic stations ranging from 100~400km are picked up, and before the inversion, we removed the mean and trend. The seismic waveforms were band pass filtered between 0.05 and 0.2Hz, and then integrated into displacement. Green's functions were calculated using the discrete wavenumber method developed by Kohketsu. The focal mechanism of the M5.1 mainshock manifests that the NEE-striking fault plane probably is the possible seismogenic fault, which is consistent with the analysis of focal depth profiles. The focal mechanisms of the ML≥2.0 aftershocks are retrieved by P-wave first motion method, and the nodal plane I is in accordance with the earthquake sequence distribution and the fault plane of the mainshock. FMSI program was adopted to inverse the stress field in the earthquake area, and the results show that the earthquake sequence is under the control of the regional stress field. The earthquake sequence occurred on the stage of slow water unloading, and ETAS model was introduced to testify the influences of water level fluctuations on earthquakes. The results denote that the reservoir played a triggering role in the earthquake, however, the NEE-striking seismogenic fault is the controlling factor. 相似文献
19.
利用南北地震带南段密集流动地震台阵的观测数据,采用波形互相关方法拾取Pn波走时,应用滑动时窗相关法识别sPn震相,通过sPn与Pn震相之间的走时差测定了芦山地震序列中28个ML4.0级以上余震的震源深度.结果表明,震源深度集中在10~20 km范围内,垂直余震带的北西-南东向震源深度剖面揭示,余震分布表现出西深东浅的特点,倾角大约为39°.这些余震在空间上具有较好的线性分布特征,推测可能发生在与主震有关的破裂面上或邻近位置,由此推测主震的破裂面倾角大约为39°.根据余震的空间分布特征,认为芦山地震的发震断层并非双石-大川断裂,可能是其东侧的一条隐伏断层. 相似文献
20.
在前期严重干旱的背景下,2010年6月27～30日广西西北部出现大暴雨过程,大范围积水成涝.降雨量最大的凌云、凤山交界于6月28日17时开始出现密集的微震活动,形成显著的震群事件.自6月28日至7月15日共记录地震2739次,其中2～2.9级(ML,下同)41次,3级以上地震3次,最大为7月1日10时27分3.2级地震... 相似文献