共查询到20条相似文献，搜索用时 153 毫秒
1.
很多地区地震资料的信噪比较低,而用于压制与信号具有不同方向的随机噪声的常规二维滤波方法常常产生假信息。基于相邻信号具有相干性这一假设,本文提出了一种叠后衰减随机噪声的多道滤波方法。该方法利用信噪比最高的中频段信息(含有主频的这一频率区间)分时窗计算信号单位矢量,并将该时窗内全频段数据向信号单位矢量方向投影,对各时窗(包括时间方向和空间方向)重叠部分按比例进行加权。我们利用这种方法对含有陡倾角的合成地震数据和海上二维实际地震资料进行了处理,处理效果很好。这种方法较为费时,但不受倾角限制,应用范围广。 相似文献
2.
Further improvement of temporal resolution of seismic data by autoregressive (AR) spectral extrapolation 总被引：1，自引：0，他引：1
Hakan Karsl&#x; 《Journal of Applied Geophysics》2006,59(4):324-336
Seismic data have still no enough temporal resolution because of band-limited nature of available data even if it is deconvolved. However, lower and higher frequency information belonging to seismic data is missing and it is not directly recovered from seismic data. In this paper, a method originally applied by Honarvar et al. [Honarvar, F., Sheikhzadeh, H., Moles, M., Sinclair, A.N., 2004. Improving the time-resolution and signal–noise ratio of ultrasonic NDE signals. Ultrasonics 41, 755–763.] which is the combination of the most widely used Wiener deconvolution and AR spectral extrapolation in frequency domain is briefly reviewed and is applied to seismic data to improve temporal resolution further. The missing frequency information is optimally recovered by forward and backward extrapolation based on the selection of a high signal–noise ratio (SNR) of signal spectrum deconvolved in signal processing technique. The combination of the two methods is firstly tested on a variety of synthetic examples and then applied to a stacked real trace. The selection of necessary parameters in Wiener filtering and in extrapolation are discussed in detail. It is used an optimum frequency windows between 3 and 10 dB drops by comparing results from these drops, while frequency windows are used as standard between 2.8 and 3.2 dB drops in study of Honarvar et al. [Honarvar, F., Sheikhzadeh, H., Moles, M., Sinclair, A.N., 2004. Improving the time-resolution and signal–noise ratio of ultrasonic NDE signals. Ultrasonics 41, 755–763.]. The results obtained show that the application of the purposed signal processing technique considerably improves temporal resolution of seismic data when compared with the original seismic data. Furthermore, AR based spectral extrapolated data can be almost considered as reflectivity sequence of layered medium. Consequently, the combination of Wiener deconvolution and AR spectral extrapolation can reveal some details of seismic data that cannot be observed in raw signal or which lost during the previous processing. 相似文献
3.
Roberto de Franco 《Geophysical Prospecting》2005,53(3):335-348
Multi‐refractor imaging is a technique for constructing a single two‐dimensional image of a number of refractors by stacking multiple convolved and cross‐correlated reversed shot records. The method is most effective with high‐fold data that have been obtained with roll‐along acquisition programs because the stacking process significantly improves the signal‐to‐noise ratios. The major advantage of the multi‐refractor imaging method is that all the data can be stacked to maximize the signal‐to‐noise ratios before the measurement of any traveltimes. However, the signal‐to‐noise ratios can be further increased if only those traces that have arrivals from the same refractor are used, and if the correct reciprocal times or traces are employed. A field case study shows that multi‐refractor imaging can produce a cross‐section similar to the familiar reflection cross‐section with substantially higher signal‐to‐noise ratios for the equivalent interfaces. 相似文献
4.
Effective noise reduction of single-sweep recorded data is achieved by application of a velocity filter process on a decomposed vibrator pattern. This technique promises high resolution results with a minimum effect on signal characteristic. A comparison of the stacked section of records vertically stacked in the field with the stacked section of velocity-filtered receiver gathers shows a significant increase in resolution and signal-to-noise ratio. 相似文献
5.
利用数字图像处理技术提高地震剖面图像信噪比 总被引：1，自引：2，他引：1
提出了利用数字图像处理技术提高地震剖面信噪比的新方法，首先根据数字图像处理要求的格式，对地震剖面数据进行转换，得到地震剖面图像，分析了地震数据特点和初步地震图像的实验结果后，设计了新的预处理方法——“二维沿层滤波”，在此基础上，利用可以计算帧间运动速度及其变化都较大的改进的光流分析技术，计算出多幅地震剖面对应点的偏移量，然后应用图像积累技术对这多幅地震剖面进行积累，实现对三维地震数据体提高信噪比的处理，该方法充分利用了三维地震信息，不但可以提高整个数据体的信噪比，而且可以减少信号能量的损失，并保持原来的信号能量关系，使地震剖面的质量得到明显提高，为地震解释奠定良好的基础。 相似文献
6.
在深反射地震资料处理中,当来自深部的有效弱信号和噪声干扰频带差异较小且难以区分时,传统滤波方法的应用会受到限制.谱分解方法是一种使用离散傅里叶变换,基于信号的频率-振幅谱等信息生成高分辨率地震图像的方法,通常用来识别介质物性横向分布特征,处理复杂介质内频谱变化和局部相位的不稳定性等问题,包括定位复杂断层和小尺度断裂等.S变换作为一种新的时频分析方法,具有自动调节分辨率的能力,近些年来被广泛应用到勘探地震、大地电磁等数据处理中,逐渐成为地球物理方法中噪声压制的有效方法之一.与常规石油反射地震资料相比,深反射主动源地震为了探测深部结构信息,常采用大药量激发方式、长排列观测系统等,导致深部有效信号基本湮灭在噪声干扰之中.针对深反射数据特点,本文结合谱分解和S变换技术,首先设计了简单的脉冲函数实验数据,证实S变换方法的有效性,同时说明谱分解方法的效果受所用时频分析方法影响较大,而其中决定分辨能力的变换窗函数的选取尤为重要.在此基础上,分别应用到深反射地震资料的单道和叠加剖面实际数据上,对比分析了传统变换谱分解和S变换谱分解的应用效果,单道资料对比结果表明:相比传统谱分解,S变换谱分解方法具有自动调节分辨率的能力,能够精确的标定深反射地震资料中弱信号不同时刻的频率分量;叠加剖面资料应用结果表明:由S变换谱分解得到的剖面结果与其他谱分解方法结果整体上具有较高的一致性,同时清晰地刻画出原叠加剖面上被噪声湮灭的低频细节特征,提高了剖面的分辨率及同相轴连续性;对比结果明显看出,Gabor变换谱分解方法得到的结果同相轴较为破碎,分析原因认为这是由Gabor变换的时频分解方法的定长窗函数所致,窗口大小不会随着信号频率的变化来调节长度,只能在处理的过程中根据一定的记录长度范围选取窗函数参数,而S变换谱分解方法在窗函数的选取时,通过时变信号的局部频率特征自动调节窗口长度,能够更好的刻画各个频段的细节特征,在深反射剖面成像应用中效果尤为明显.本文结果表明S变换谱分解技术在深地震叠加剖面上的应用有效地提高了来自深部弱反射信号的信噪比和分辨率,并刻画出了叠加剖面上所不具有的低频细节特征,在实际深反射地震资料处理中能有效保护低频弱信号获得更好的成像效果.本文为深地震反射资料中弱信号的保护处理找到一种有效的方法. 相似文献
7.
叠前地震资料中,高频分量和低频分量随传播距离的衰减特性不同.本文给出了一种在小波域定性估计叠前地震资料衰减参数的方法.该方法利用连续小波变换提取共反射点道集的高、低频分量,以低频分量和高频分量之差定性反映地震波的衰减.通过累加不同偏移距的衰减,提高了估计的稳定性;采用幅度归一化方法,降低了信号幅值对衰减参数估计的影响.将本文提出方法与常用的基于叠后地震资料衰减估计方法用于某油田的地震资料处理,结果表明,本文方法得到的衰减估计结果能够更好地反映油气的空间展布. 相似文献
8.
常规的可控震源Chirp扫描信号的地震响应存在着相关信号旁瓣大、分辨率低的缺点;用二元伪随机编码信号作为可控震源的驱动信号,地震响应剖面中存在严重的相关噪声,降低了地震记录的信噪比.本文提出的可控震源匹配扫描方法,利用匹配伪随机序列偶调制正弦载波信号作为可控震源驱动信号进行扫描激发,得到两个匹配的原始地震记录,对两个匹配的原始地震记录分别解码后再进行叠加形成最终的综合解码地震剖面.地震数值模拟的结果表明,该方法基本不存在常规Chirp扫描情形的旁瓣效应,可有效避免m-序列编码扫描情形的相关噪声,其最后形成的综合解码地震剖面可以与脉冲震源的炮集记录相媲美. 相似文献
9.
10.
Common reflection surface stack using dip decomposition for rugged surface topography 总被引：1，自引：0，他引：1
We present an extension of the Common Reflection Surface （CRS） stack that provides support for an arbitrary top surface topography. CRS stacking can be applied to the original prestack data without the need for any elevation statics. The CRS-stacked zero- offset section can be corrected （redatumed） to a given planar level by kinematic wave field attributes. The seismic processing results indicate that the CRS stacked section for rugged surface topography is better than the conventional stacked section for S/N ratio and better continuity of reflection events. Considering the multiple paths of zero-offset rays, the method deals with reflection information coming from different dips and performs the stack using the method of dip decomposition, which improves the kinematic and dynamic character of CRS stacked sections. 相似文献
11.
信噪比是衡量地震数据质量的重要指标之一,在地震数据处理和解释中有着重要的作用.目前已有的地震数据信噪比估计方法往往得到的是整个数据的全局信噪比,这种方法只能说明地震数据总体质量的好坏,无法直观细致地刻画地震信号的局部质量.本文提出一种基于正则化条件的局部信噪比估计方法.该方法的基本原理是使用正则化共轭梯度法求解局部信噪比最优解,正则化算子的参数将控制地震信号各点数据局部信噪比的平滑性.其中应用一种基于"过滤波"的级联信号估计方法来计算有效信号,该方法利用有效信号和噪声的相关性特征计算局部信噪比中的有效信号.局部信噪比估计方法利用了信号中每个数据点及其邻域各点的局部信息,避免了使用单个数据点而可能出现的信噪比不合理值,而且局部处理能够减少全局噪声对信噪比估算的影响,该方法可以更准确地表征地震资料信噪分布特征.另外,局部信噪比对去噪方法的评估也具有重要意义.理论模型测试和实际资料处理结果表明,局部信噪比估计方法能够准确反映任一给定地震信号剖面的局部信噪比特征,为非平稳地震数据质量评估提供了直观的评判标准. 相似文献
12.
基于声弹性理论,本文详细论述了利用交叉偶极子多频率相速度反演地层三阶弹性常数和地应力的理论及信噪比对反演结果的影响.定性和定量分析表明在速度应力方程中,不含三阶弹性常数项与含三阶弹性常数项相比对速度的影响可以忽略,由此只利用一次测井资料同时反演地应力和三阶弹性常数是一个严重病态的问题或一个不确定性问题.针对不同的反演模型,详细考察了信噪比对各自简化模型和精确模型反演结果的影响.数值模拟结果表明,利用一次测井采用精确模型反演全部四个参数方法受信噪比影响严重.而利用不同流体压力下的测井资料进行反演时可以采用简化模型取代精确模型以便简化计算和提高反演速度,因为简化模型和精确模型有着几乎相同的精度;同时,分步反演的方法可以较好地反演出原位地应力及三阶弹性常数. 相似文献
13.
Reflection and refraction data are normally processed with tools designed to deal specifically with either near- or far-offset data. Furthermore, the refraction data normally require the picking of traveltimes prior to analysis. Here, an automatic processing algorithm has been developed to analyse wide-angle multichannel streamer data without resorting to manual picking or traveltime tomography. Time–offset gathers are transformed to the tau–p domain and the resulting wavefield is downward continued to the depth–p domain from which a velocity model and stacked section are obtained. The algorithm inputs common-depth-point (CDP) gathers and produces a depth-converted stacked section that includes velocity information. The inclusion of long-offset multichannel streamer data within the tau–p transformation enhances the signal from high-velocity refracted basalt arrivals. Downward continuation of the tau–p transformed wavefield to the depth–p domain allows the reflection and refraction components of the wavefield to be treated simultaneously. The high-slowness depth–p wavefield provides the velocity model and the low-slowness depth–p wavefield may be stacked to give structural information. The method is applied to data from the Faeroe Basin from which sub-basalt velocity images are obtained that correlate with an independently derived P-wave model from the line. 相似文献
14.
15.
Multidimensional GPR array processing using Kirchhoff migration 总被引：1，自引：0，他引：1
Mark L. Moran Roy J. Greenfield Steven A. Arcone Allan J. Delaney 《Journal of Applied Geophysics》2000,43(2-4)
We compare the ability of several practical ground-penetrating radar (GPR) array processing methods to improve signal-to-noise ratio (SNR), increase depth of signal penetration, and suppress out-of-plane arrivals for data with SNR of roughly 1. The methods include two-dimensional (2-D) monostatic, three-dimensional (3-D) monostatic, and 3-D bistatic Kirchhoff migration. The migration algorithm is modified to include the radiation pattern for interfacial dipoles. Results are discussed for synthetic and field data. The synthetic data model includes spatially coherent noise sources that yield nonstationary signal statistics like those observed in high noise GPR settings. Array results from the model data clearly indicate that resolution and noise suppression performance increases as array dimensionality increases. Using 50-MHz array data collected on a temperate glacier (Gulkana Glacier, AK), we compare 2-D and 3-D monostatic migration results. The data have low SNR and contain reflections from a complex, steeply dipping bed. We demonstrate that the glacier bed can only be accurately localized with the 3-D array. In addition, we show that the 3-D array increases SNR (relative to a 2-D array) by a factor of three. 相似文献
16.
Most of the microseismic signals have low signal-to-noise ratio (SNR) due to the strong background noise, which makes it difficult to locate the first arrival time. Both accuracy and stability of conventional methods are poor in this situation. To overcome this problem, here we proposed a new method based on the adaptive Morlet wavelet and principal component analysis process in wavelet coefficients matrix. The three components of microseismic signal make it possible to extract the features in wavelet coefficients domain. Then the reconstructed signal from weighted features presents an obvious first arrival. Tests on synthetic signals and real data provide a solid evidence for its feasibility in low SNR microseismic signal. 相似文献
17.
Determination of a shallow velocity–depth model from seismic refraction data by coherence inversion1
Seismic refractions have different applications in seismic prospecting. The travel- times of refracted waves can be observed as first breaks on shot records and used for field static calculation. A new method for constructing a near-surface model from refraction events is described. It does not require event picking on prestack records and is not based on any approximation of arrival times. It consists of the maximization of the semblance coherence measure computed using shot gathers in a time window along refraction traveltimes. Time curves are generated by ray tracing through the model. The initial model for the inversion was constructed by the intercept-time method. Apparent velocities and intercept times were taken from a refraction stacked section. Such a section can be obtained by appling linea moveout corrections to common-shot records. The technique is tested successfully on synthetic and real data. An important application of the proposed method for solving the statics problem is demonstrated. 相似文献
18.
19.
碳酸盐岩溶洞成像要素分析与研究 总被引：1，自引：0，他引：1
碳酸盐岩油气藏储集空间以裂缝和溶洞为主,在地震剖面上主要表现为＂串珠状＂。为了研究溶洞成像规律,本文通过大量的数值模拟,分析溶洞的成像分辨率,探讨溶洞成像与上覆地层、信噪比（SNR）、覆盖次数、偏移速度和偏移方法之间的定量关系。研究认为：①无论是溶洞的纵向分辨率还是横向分辨率,均满足1/4波长调谐规律,可以将薄层机理转用至溶洞分辨率解释;②溶洞的存在会对上覆地层产生下拉效应,使溶洞在地震剖面上呈塌陷等＂非串珠状＂特征;③高覆盖和小道距（面元）可提高串珠能量,压制偏移附带的背景噪声;④叠前偏移能改善资料的SNR,提高成像精度,特别是低SNR资料;⑤偏移速度偏小,串珠边缘下拉,反之会上翘,速度偏大带来的成像质量变差的程度要大于速度偏小;⑥不同偏移方法对缝洞成像效果存在差异,对于低SNR资料,溶洞成像拟选取频率域或频波域方法。 相似文献