首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 62 毫秒
1.
Introduction The Pamirs region where Jiashi is located is one of the most active regions of continental plate dynamics in China. Frequent earthquakes here, especially several strong earthquakes oc- curred in 1997 and 2003, have provided excellent conditions for studying the tectonic stress field in this region and a large number of results (GAO and WEN, 2000; GAO et al, 2004; XU, 2001; ZHOU et al, 2001) have been obtained. Although different methods and data were used, under- standings …  相似文献   

2.
Study on in-situ stress measurement around coastal marginal land in Fujian   总被引：1，自引：1，他引：1  
Introduction The southeast coastal margin of Chinese mainland is important to understand the mutual movement, matter exchange and energy transfer between ocean and land lithospheres, as well as their effects. The coastal area in Fujian Province is advanced in economy development but it has frequent earthquakes, or even strong earthquakes. Therefore, the current study on in-situ stress state measurement is of great significance for studying continental dynamics, marginal sea dy- namics, seismo…  相似文献   

3.
IntroductionTheinversionapproachofregionalstressfielddevelopedinrecent10to20yearsprovidesausefultoolforstudyingthemeanstressinagivenregion(Angeller,1979;Ellsworth,1981,Xu,Ge,1984).Becauseitusesmultitudinousfaultsinsteadofsinglefault,itcanremovetheinhomogeneityoflocalmediumsoastorevealtheregionalstressinformation.Besides,thismethodproducesaRvalue,whichisdefinedby(O-2--q)/(q--q),andmaydescribestherelativemagnitUdeofintermediateprincipalstress,whereq,acand%arethemaximum,theintermediateandthemi…  相似文献   

4.
On the basis of the reality of recent tectonic movement and discarding such a viewpoint that the isostatic adjust-ment only results from excessive or insufficient compensation,we have discussed the tectonic stress causing ine-auality and regarded the isostatic anomaly as a load on the earth‘s interior,thus the earth‘s inner stress can be cal-culated.The research results show that in the East China Sea and its eastern marginal seas the change of the verti-cal stress derived from the isostatic gravity anomaly is more marked than that of the horizontal stress.Along the Ryukyu trench there is an enhancement of vertical stress by 5MPa,which evidently reflects the effect of plate subduction.On contrary,along the island are to the northwest of the trench the vertical stress weakens by about5MPa.The horizontal stresses in eastern and western parts are obviously different,the east westward stress on the oceanic crust σx is negative(while the pressure is positive)but on the continental crust in positive.These facts indicate the effect of compression between plates.  相似文献   

5.
ＥｓｔｉｍａｔｉｏｎｏｆｓｅｉｓｍｉｃｓｔｒｅｓｄｒｏｐｆｒｏｍｔｈｅｐｅａｋｖｅｌｏｃｉｔｙｏｆｇｒｏｕｎｄｍｏｔｉｏｎＪＩＡＺＨＥＮＧＱＩＮ（秦嘉政）ＺＵＹＩＮＬＩＵ（刘祖荫）ＸＩＡＯＤＯＮＧＱＩＡＮ（钱晓东）ＱＩＮＧＹＩＮＸＩＥ（谢庆...  相似文献   

6.
In this paper, we have carefully determined the stress zones in the Sichuan-Yunnan region with reference to the in-situ stress data of hydraulic fracturing and the inverted fault slip data by using the step-by-step convergence method for stress zoning based on focal mechanism solutions. The results indicate that the tectonic stress field in the Sichuan-Yunnan region is divided into 3 stress zones by 2 approximately parallel NNW-trending stress transition belts. The area between the 2 belts is the Sichuan-Yunnan stress zone where the maximum principal stress σ1 is just in the NNW direction. The eastern boundary of Sichuan-Yunnan stress zone （the eastern stress transition belt） is basically consistent with the eastern boundary of Sichuan-Yunnan rhombic block. The western boundary of Sichuan-Yunnan stress zone （the western stress transition belt） is not totally consistent with the western boundary of Sichuan-Yunnan rhombic block. The northern segment of the western stress transition belt extends basically along the Jinshajiang fault and accords with the western boundary of Sichuan-Yunnan rhombic block, while its southern segment does not extend along the southwestern boundary of the rhombic block, i.e., Honghe fault and converge with the eastern stress transition belt, but stretches continuously in the NNW direction and accords with the Yingpanshan fault. We therefore consider that under the combined influence from the northward motion of India Plate, the southeastward shift of east Qinghai-Xizang Plateau and the strong obstruction of South China block, the tectonic stress field in the Sichuan-Yunnan region might not be totally controlled by the previous tectonic frame and new stress transition belt may have possibly formed.  相似文献   

7.
ＩｎｆｌｕｅｎｃｅｃａｕｓｅｄｂｙｉｎｉｔｉａｌｔｅｃｔｏｎｉｃｓｔｒｅｓｏｎｒｅｌａｔｉｖｅｍｅａｓｕｒｅｍｅｎｔｏｆｂｏｒｅｈｏｌｅｇｒｏｕｎｄｓｔｒｅｓｉｎｖｉｓｃｏｅｌａｓｔｉｃｍｅｄｉａＰＥＮＧ－ＪＵＮＺＨＡＯ１）（赵鹏君），ＪＩＡＮ－Ｗ...  相似文献   

8.
A temporary earthquake station network of 11 seismological recorders was operated in the Bursa region, south of the Marmara Sea in the northwest of Turkey, which is located at the southern strand of the North Anatolian Fault Zone (NAFZ). We located 384 earthquakes out of a total of 582 recorded events that span the study area between 28.50–30.00°E longitudes and 39.75–40.75°N latitudes. The depth of most events was found to be less than 29 km, and the magnitude interval ranges were between 0.3 ≤ ML ≤ 5.4, with RMS less than or equal to 0.2. Seismic activities were concentrated southeast of Uludag Mountain (UM), in the Kestel-Igdir area and along the Gemlik Fault (GF). In the study, we computed 10 focal mechanisms from temporary and permanents networks. The predominant feature of the computed focal mechanisms is the relatively widespread near horizontal northwest-southeast (NW–SE) T-axis orientation. These fault planes have been used to obtain the orientation and shape factor (R, magnitude stress ratio) of the principal stress tensors (σ1, σ2, σ3). The resulting stress tensors reveal σ1 closer to the vertical (oriented NE–SW) and σ2, σ3 horizontal with R = 0.5. These results confirm that Bursa and its vicinity could be defined by an extensional regime showing a primarily normal to oblique-slip motion character. It differs from what might be expected from the stress tensor inversion for the NAFZ. Different fault patterns related to structural heterogeneity from the north to the south in the study area caused a change in the stress regime from strike-slip to normal faulting.  相似文献   

9.
Introduction In recent years the study of the digital seismology has made great progress due to the wide use of the broadband digital records. And many fine results of the focal theory have obtained. The focal theory mainly studies the physical process of the seismic fracture and production of the seismic wave, as well as its traveling process. One of the great progresses is to simulate the fracture process in the active fault. Especially a new concept of the fracture mechanics has been intro…  相似文献   

10.
Ｃｈａｒａｃｔｅｒｉｓｔｉｃｓｏｆａｍｂｉｅｎｔｓｔｒｅｓｓｖａｌｕｅｓｆｏｒｍｉｃｒｏ－ｅａｒｔｈｑｕａｋｅｓｅｑｕｅｎｃｅｓｉｎＷｅｓｔｅｒｎＹｕｎｎａｎ　Ｅａｒｔｈｑｕａｋｅ　Ｐｒｅｄｉｃｔｉｏｎ　Ｅｘｐｅｒｉｍｅｎｔａｌ　ＦｉｅｌｄＪｉａ－Ｚ...  相似文献   

11.
The spatial and temporal distributions of acoustic emission （AE） during the deformation of samples containing an inhomogeneous fault have been studied under biaxial compression. The results show that the fault strength and the duration from loading to failure increase and the failure mode changes from abrupt instability to gradual failure with increase of lateral stress σ2. The pre-setting fault and its heterogeneity play an important role in controlling AE spatial distribution during the deformation. The basic pattern of AE spatial distribution is controlled by the pre-setting fault, especially the parts with inhomogeneous strength and the strong segment, and the localization of fracturing starts from the positions with inhomogeneous strength, With increase of σ5, the dense AE distribution area spreads from the positions with inhomogeneous strength to the whole strong segment gradually. AE temporal sequence is significantly affected by σ2. The fault shows abrupt instability in final failure, which occurs on a background of ＂enhancement-quiescence＂ in microfracturing activity at lower σ2. At higher σ5, the fault shows gradual failure, and AE occurrence rate increases continuously and AER increase exponentially before and after the failure, The effect of σ2 on b-value is also remarkable, b-value shows precursory decrease in the weakening stage when fault behavior is abrupt instability, but it shows balanced change when fault behavior is gradual failure,  相似文献   

12.
On the basis of S wave information from Tai’an-Xinzhou DSS profile and with reference to the results from P-wave interpretation, the 2-D structures, including S-wave velocity V s, ratio γ between V p and V s; and Poisson’ s ratio σ, are calculated; the structural configuration of the profile is presented and the relevant inferences are drawn from the above results. Upwarping mantle districts (V s≈4.30 km/s) and sloping mantle districts (V s≈4.50 km/s) of the profile with velocity difference about −4% at the top of upper mantle are divided according to the differences of V s, γ and σ in different media and structures, also with reference to the information of their neighbouring regions; the existence of Niujiaqiao-Dongwang high-angle ultra-crustal fault zone is reaffirmed; the properties of low and high velocity blocks (zones) including the crust-mantle transitionalzone and the boudary indicators of North China rift valley are discussed. A comprehensive study is conducted on the relation of the interpretation results with earthquakes. It is concluded that the mantle upwarps, thermal material upwells through the high-angle fault, the primary hypocenter was located at the crust-mantle juncture 30.0∼33.0 km deep, and additional stress excited the M S=6.8 and M S=7.2 earthquakes at specific locations around 9.0 km below Niujiaqiao-Dongwang, the earthquakes took place around the high-angle ultra-crustal fault and centered in the brittle media and rock strata with low γ and low σ values. This subject is part of the 85-907-02 key project during the “8th Five-Year Plan” from the State Science and Technology Commission.  相似文献   

13.
Ａｌｉｇｎｍｅｎｔｓｉｌｋｗｏｒｍｓａｓｓｅｉｓｍｉｃａｎｉｍａｌａｎｏｍａｌｏｕｓｂｅｈａｖｉｏｒ（ＳＡＡＢ）ａｎｄｅｌｅｃｔｒｏｍａｇｎｅｔｉｃｍｏｄｅｌｏｆａｆａｕｌｔ：ａｔｈｅｏｒｙａｎｄｌａｂｏｒａｔｏｒｙｅｘｐｅｒｉｍｅｎｔＭＯＴＯ...  相似文献   

14.
    
Based on 141 data of in-situ stress orientations data of breakouts, stress reliefs and hydraulic fracture tests, and some data of stress magnitudes from oil-well hydrofracturing operations, this paper discusses in-situ stress regime and the tectonic stress provinces in the China’s Sea and adjacent areas. Furthermore, the origin of tectonic stress field is expounded. The research results show that the tectonic stress in China’s Sea region can be divided into some stress provinces which are the extension of the Northern China and Southern China stress provinces toward the eastern sea area. The tectonic stress field in the Bohai and Huanghai and their neighbouring regions is controlled by a ENE-WSW compression, where the faulting types are mainly strike-slip. However, the stress in the East and South China’s sea region and the Taiwan Straits is dominated by the WNW-NW-NNW compressions, that is to say that the orientations of the maximum horizontal stress spread radially from the central mainland toward southeastern sea areas. The principal stress directions become more and more steady and uniform as depth increases. In the North China and nearby areas, the types of faulting are primarily strike-slip. In Southern China and adjacent sea areas, there is a transition layer at 1,700M depth, the faultings principally show reverse faults above that depth and strike-slip below it. Furthermore the origin of the tectonic stress field in this region may primarily come from the composite action of the Pacific, the Philippine sea and the India-Australian plates. The Chinese version of this paper appeared in the Chinese edition ofActa Seismologica Sinica,14, 17–28, 1992.  相似文献   

15.
Based on P- and S-wave amplitudes and some clear initial P-wave motion data, we calculated focal mechanism solutions of 928 M≥2.5 earthquakes （1994-2005） in four sub-blocks of Sichuan and Yunnan Provinces, namely Sichuan-Qinghai, Yajiang, Central Sichuan and Central Yunnan blocks. Combining these calculation results with those of the focal mechanism solutions of moderately strong earthquakes, we analyzed the stress field characteristics and dislocation types of seismogenic faults that are distributed in the four sub-blocks. The orientation of principal compressive stress for each block is： EW in Sichuan-Qinghai, ESE or SE in Yajiang, Central Sichuan and Central Yunnan blocks. Based on a great deal of focal mechanism data, we designed a program and calculated the directions of the principal stress tensors, σ1, σ2 and σ3, for the four blocks. Meanwhile, we estimated the difference （also referred to as consistency parameter θ^- ） between the force axis direction of focal mechanism solution and the direction of the mean stress tensor of each block. Then we further analyzed the variation of θ^- versus time and the dislocation types of seismogenic faults. Through determination of focal mechanism solutions for each block, we present information on the variation in θ^- value and dislocation types of seismogenic faults.  相似文献   

16.
Introduction Ready and Renkin (1971) were the first to make the research on anisotropy problems in magnetotellurics (MT). The progress in the research is not evident because it is more complex and difficult than isotropic problems. Now, the one-dimensional (1D) anisotropy problems in MT have been well solved, while for the two-dimensional (2D) cases, the numerical solutions have only been obtained for some particular conditions (Ready and Renkin, 1975). As to the three-dimensional (3D) ani…  相似文献   

17.
The feasibility of gaining valuable geomechanical information derived from seismological data and its specialist interpretation for utilisation in the area of assessing hazards due to mining tremors and rockbursts has become a development of signal importance in mining seismology. Undoubtedly of particular interest is a certain knowledge of the directions of the principal stresses 1, 2, 3 of the regional stress tensor. For their determination, use is made of a set of parameters from the mining tremors' regional focal mechanism solutions (angular parameters of nodal planes and axes of principal stresses in the tremor focus —P andT). Results of research conducted at the Szombierki and Wujek mines and analysis of calculated results for parameters of regional stress tensor show that there exist appreciable differences between values of these parameters and also a clear correlation with local extraction conditions that is of significance from the point of view of seismic hazard.  相似文献   

18.
On the basis of about 300 earthquake wave forms observed in the Shidian M S=5.9 sequences on April 12, 2001 recorded in Kunming Digital Seismic Network, the spectra of shear wave have been used to estimate the focal parameters of these earthquake sequences. The results show that within the magnitude range of 1.5–5.3, the seismic moments are 1010–1016 N·m, the corner frequencies are 0.2–0.8 Hz, radii of the focal rupture are 200–2 500 m and the stress drops are 0.1×105–20×105Pa. Through the statistical analyses of variation of corner frequency f c and stress drop Δσ with time, it is discovered that the average corner frequency of the foreshock sequences is obviously lower than that of the aftershock sequences. Contrarily, the average stress drops Δσ of the foreshock sequences are clearly higher than that of the aftershocks. It is considered that these variation characteristics of average corner frequency and stress drops before and after the main shock have index significance to the precursory information before a strong earthquake. The higher stress drops for the foreshock sequences show that the higher shear stresses have been stored in the area of main shock. After the main shock, most of the stresses have been released, so the aftershock sequences show a rupture process of lower stresses. Foundation item: Scientific and Technological Key Project of Yunnan Province (2001NG46)  相似文献   

19.
There exists an E-W trending Middle Jurassic volcanic zone in southern China. The Fankeng basalts in the Yongding basin of Fujian Province are considered to be a typical example. The Fankeng basalts have TiO2 contents in the range of 1.92%-3.21%. They are classified as high-Ti basalts. They also have higher total Fe (averaging FeO* = 11.09%). The Middle Jurassic Fankeng basalts from southwestern Fujian have obvious distinctive lithogeochemical features from early Cre- taceous basalts from southeastern coast of China. They have higher HFSE, such as Th, Nb, Ta, Zr and Ti. Their element ratios related with HFSE, such as Zr/Ba, La/Nb, La/Ta ,Zr/Y, Ti/Y, Ba/Nb, K/Ti and Rb/Zr are similar to those of OIB. The most samples have ε Nd(T) of-0.70-0.24, which are near chondrite. Some samples have higher ε Nd(T) of 1.87-3.55.Therefore, these basaltic magmas might be derived from depleted asthenospheric mantle. The lithogeochemical characteristics of the Fankeng basalts may be caused by interaction between asthenosphere and lithosphere at the time. The (Early-) Middle Jurassic basalts and gabbros from southeastern Hunan, southern Jiangxi and northern Guangdong provinces show similar geochemical features to those of the Fankeng basalts from the Yongding of Fujian. Occurrence of these OIB-type basalts in the area may be regarded as the petrological mark of upwelling of asthenosphere at the time. Upwelling of asthenosphere has led to tectonic extension and the formation of rifted basin in the area.  相似文献   

20.
应用“固结问题和布辛涅斯克问题解”,计算了丹江水库水位在130m和157m两种情况下,库区基岩体深度分别为1、3、5、7、9、11、13和15km时的水压应力场、变形场和超孔隙水压力场。结果表明,σ_1、σ_3和τ_(max)在库中心位置最大,库岸边较小;同时σ_1和σ_3在库中心均显压性,而在库岸边σ_3显张性;垂直位移在库中心最大(7cm),而水平位移在库岸边最大(0.5cm);超孔隙水压力一般在库中心深水区库基下3—9km处最大,库岸边和浅水区较小;体应变一般在库中心位置形成压缩区,而在库岸边则形成拉伸应变区并同时向四周扩展,与诱发地震震中分布相一致。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号