共查询到20条相似文献，搜索用时 187 毫秒
1.
2.
Rill erosion is a dominant sediment source on sloping lands. However, the amount of soil loss from rills on steep slopes is vastly more than that on gentle slopes because of differences in rill shape and hydraulic patterns. The aims of this paper are to determine the hydrodynamic characteristics of rills and the friction coefficients in steep slope conditions and to propose modifications of some hydraulic parameters used in soil loss prediction models. A series of inflow experiments was conducted on loess slopes. The results show that the geometric and hydraulic properties of rill on the steep loess slopes, which are characterized by the mean width of cross sections, mean velocity and mean depth of flow, are related to discharge and slope gradient in power functions. However, the related exponents to discharge are 0.26, 0.48 and 0.26, respectively, which are different from the exponents derived in previous studies, which were conducted on gentle slopes. The Manning roughness coefficient ranged from 0.035 to 0.071, with an average of 0.0536, and the Darcy–Weisbach friction coefficients varied from 0.4 to 1.9. The roughness coefficients are closely related to the Reynolds numbers and flow volumes; however, the correlations vary with slope gradient. The roughness coefficients are directly proportional to the Reynolds number and the flow volume on steep slopes, in contrast with the roughness coefficients found on gentle slopes, which decrease as the Reynolds number and flow volume increase. This difference is caused by the interactions among the hydraulics of the flow, the shape of the rills and the sediment concentrations on steep slopes. The results indicate that parameters used in models to predict rill erosion have to be modified according to slope gradient. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
3.
1920年海原8.5级大地震诱发的石碑黄土塬滑坡,因其规模大、坡度小、滑距远的特点成为业界关注焦点,目前对该滑坡的物理力学过程仍无统一认识。基于此,文章通过理论分析和数值计算方法研究该滑坡初始状态、地震动力响应和流滑发展过程。为分析震前斜坡初始状态,建立考虑斜坡表面拉裂缝中侧向水压力作用的力学计算模型。结果表明,拉裂缝中侧向水压力削弱了斜坡整体稳定状态;为研究地震时斜坡动力响应过程,建立数值计算模型,获得地震时斜坡饱和土层的孔隙水压力比和斜坡位移的变化特性;为解释远程滑坡,将液化后土层等效为流体,借鉴泥流滑距估算理论,求算石碑塬滑坡的滑距,计算结果与前人现场考察结果吻合。 相似文献
4.
裂缝常存在于边坡表面，地震作用会大幅降低裂缝边坡稳定性。针对双层土裂缝边坡稳定性问题，定义上下土层分界处高度与边坡高度之比为深度系数以描述双层土的分布，基于极限分析上限定理，构建“点到点”离散运动学机构，并在此机构中引入一条垂直张拉裂缝，结合拟静力法和强度折减法建立能量平衡方程求解裂缝边坡临界高度和安全系数上限解。计算结果与传统上限法进行对比，验证离散运动学机构的有效性及其解的优越性，同时探究土体非均质性及深度系数对裂缝边坡稳定性以及裂缝深度和位置的影响规律。结果表明，地震作用会降低边坡稳定性；随着地震力增大，边坡临界滑动面逐渐加深，裂缝深度略微增大，裂缝位置逐渐远离坡面；对于具体的双层土边坡会存在一个特定的深度系数使边坡安全系数达到最值，同时裂缝会穿越至下层土且深度发生突增。 相似文献
5.
Different models were developed for evaluating the probabilistic three-dimensional (3D) stability analysis of earth slopes and embankments under earthquake loading using both the safety factor and the displacement criteria of slope failure. In the 3D analysis, the critical and total slope widths become two new and important parameters.The probabilistic models evaluate the probability of failure under seismic loading considering the different sources of uncertainties involved in the problem, i.e. uncertainties stemming from the discrepancies between laboratory-measured and in-situ values of shear strength parameters, randomness of earthquake occurrence, and earthquake-induced acceleration. The models also takes into consideration the spatial variabilities and correlations of soil properties.Five probabilistic models of earthquake-induced displacement were developed based on the non-exceedance of a limited value criterion. Moreover, a probabilistic model for dynamic slope stability analysis was developed based on 3D dynamic safety factor.These models are formulated and incorporated within a computer program (PTDDSSA).A sensitivity analysis was conducted on the different parameters involved in the developed models by applying those models to a well-known landslides (Selset landslide) under different levels of seismic hazard.The parametric study was conducted to evaluate the effect of different input parameters on the resulting critical failure width, 3D dynamic safety factor, earthquake-induced displacement and the probability of failure. Input parameters include: average values and coefficients of variations of water table, cohesion and angle of friction for effective stress analysis, scales of fluctuations in both distance and time, hypocentral distance, earthquake magnitude, earthquake strong shaking period, etc.The hypocentral distance and earthquake magnitude were found to have major influence on the earthquake-induced displacement, probability of failure (i.e. probability of allowable displacement exceedance), and dynamic 2D and 3D safety factors. 相似文献
6.
7.
Soil erosion plays an important role in plant colonization of semi‐arid degraded areas. In this study, we aimed at deepening our knowledge of the mechanisms that control plant colonization on semi‐arid eroded slopes in east Spain by (i) determining topographic thresholds for plant colonization, (ii) identifying the soil properties limiting plant establishment and (iii) assessing whether colonizing species have specific plant traits to cope with these limitations. Slope angle and aspect were surrogates of erosion rate and water availability, respectively. Since soil erosion and water availability can limit plant establishment and both can interact in the landscape, we analysed variations in colonization success (vegetation cover and species number) with slope angle on 156 slopes, as a function of slope aspect. After determining slope angle thresholds for plant colonization, soil was sampled near the threshold values for soil analysis [nitrogen, phosphorous, calcium carbonate (CaCO3), water holding capacity]. Plant traits expressing the plant colonizing capacity were analysed both in the pool of species colonizing the steep slopes just below the threshold and in the pool of species inhabiting gentler slopes and absent from the slopes just below the threshold. Results show that the slope angle threshold for plant colonization decreased from north to south. For the vegetation cover, threshold values were 63°, 50°, 46°, 41° for the north, east, west and south slope aspect classes, respectively, and 65°, 53°, 49° and 45° for the species richness and the same aspect classes. No differences existed in soil properties at slope angle threshold values among slope aspects and between slope positions (just below and above the threshold) within slope aspect classes. This suggests that variations between slope aspect classes in the slope angle threshold result from differences in the colonizing capacity of plants which is controlled by water availability. Long‐distance dispersal and mucilage production were preferably associated with the pool of colonizing species. These results are discussed in the perspective of a more efficient ecological restoration of degraded semi‐arid ecosystems where soil erosion acts as an ecological filter for plant establishment. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
8.
9.
考虑崩塌堆积体边坡岩土体参数随机性和模糊性,以及地震力双向性,建立一种边坡地震动力模糊可靠度计算方法,针对竖向地震力对崩塌堆积体边坡稳定可靠性的影响进行进一步研究。首先,选用动力有限元时程分析法计算出双向地震工况下崩塌堆积体边坡的响应特征,并运用模糊理论对强度参数进行模糊性处理;然后,根据Mohr-Coulumb强度准则构建边坡安全系数与可靠度的时程计算模型;最后,采用边坡地震可靠性评价新方法,通过MATLAB编写相应程序,实现计算和分析结果的快速输出。案例结果表明:新方法计算结果更加合理,对工程而言也更加安全;竖向地震作用均对崩塌堆积体边坡整体可靠性存在影响,但影响程度需根据工程实际情况进行分析。在算例工况下,竖向地震对崩塌堆积体边坡的可靠性影响很小,仅使得可靠度降低3.55%,因此,可仅考虑水平地震的影响。 相似文献
10.
利用高分辨率无人机航拍影像,结合基本地质资料,分析了影响2014年8月3日鲁甸M_S6.5地震震后崩塌滑坡分布的主要因素,使用M5'模型树算法建立了崩塌滑坡密度与其影响因子间的分段线性模型,并检验了该模型的预测性能。结果表明,地震诱发的崩塌滑坡分布受断层距、岩土体结构强度、坡度、植被条件等的影响,其中,断层距、岩土体结构强度及坡度等为主要影响因素;崩塌滑坡易发生在结构破裂区及坡度为38°~50°的区域,其分布密度随断层距的增加而减小;利用M5'模型树算法建立的模型体现出崩塌滑坡分布与其影响因子间复杂的非线性关系,模型检验结果显示,理论模型与实际关联函数间的相关系数达到0.88,因此,可利用该模型预测地震诱发的崩塌滑坡的分布。 相似文献
11.
为研究地震时高路堑黄土边坡破坏的细观力学过程,以黄土地区某高速公路边坡为例,在野外工程地质勘察和室内试验基础上,用强度折减法对开挖后的高路堑黄土边坡的初始状态进行分析,进而对该高路堑边坡采用PFC2D建立数值计算模型,模拟边坡地震响应全过程;通过分析地震响应过程中颗粒的位移、配位数、孔隙率、应力和应变率等关键要素,从细观层面揭示边坡的失稳过程。结果显示,通过该方法能够再现地震作用下滑坡的细观物理力学过程,涵盖了边坡的破坏模式和破坏过程,以及应力应变等时空演化规律。研究结果对于认识地震作用下高路堑黄土边坡的破坏机理具有重要意义。 相似文献
12.
Seismic performance of natural slopes, earth structures and solid-waste landfills can be evaluated through displacement-based methods in which permanent displacements induced by earthquake loading are assumed to progressively develop along the critical sliding surface as a result of transient activation of plastic mechanisms within the soil mass. For sliding mechanisms of general shape the earthquake-induced displacements should be computed using a model that provides a closer approximation of sliding surface. When large permanent displacement are induced by seismic actions, due to substantial shear strength reduction, and significant changes in ground surface occur, an improved estimate of permanent displacement can be obtained using a model which accounts for shear strength reduction and mass transfer between adjacent portions of the slope resulting from geometry changes of ground surface during the seismic event.In this paper, a GLE-based model is proposed for seismic displacement analysis of slopes that accounts for shear strength degradation and for geometry rearrangement. Model accuracy is validated against experimental results obtained from shaking table tests carried out on small scale model slopes. Comparison of computed and experimental results demonstrates the capability of the proposed approach in capturing the main features of the observed seismic response of the model slopes. 相似文献
13.
Gonghui Wang Runqiu Huang Masahiro Chigira Xiyong Wu Sérgio D. N. Lourenço 《地球表面变化过程与地形》2013,38(3):265-274
Here, we propose that an earthquake can trigger the failure of a landslide mass while simultaneously triggering liquefaction of runout‐path materials before the arrival of the landslide mass, thus greatly increasing the size and mobility of an overriding landslide. During the 2008 Wenchuan earthquake, about 60 000 landslides were triggered, directly resulting in about 20 000 casualties. While these landslides mainly originated from steep slopes, some landslides with high mobility formed in colluvial valley deposits. Among these, the most catastrophic was the Xiejiadian landslide in Pengzhou city, which traveled hundreds of meters before coming to rest. Through field investigation and laboratory testing, we conclude that this landslide primarily formed from colluvial deposits in the valley and secondarily from failure of slopes in granitic rock located uphill. Much of the granitic slope failure was deposited in the upper part of the travel path (near the slide head); the remainder was dispersed throughout the main landslide deposit. Superposition of deposits at the landslide toe indicates that landslide debris derived from colluvial soil was deposited first. The deposits at the landslide toe displayed flow characteristics, such as fine materials comprising basal layers and large boulders covering the deposit surface. We hypothesize that the main part of the landslide resulted from seismogenic liquefaction of valley colluvium, rather than from liquefaction potentially caused by undrained loading from the granitic slope failures impacting the colluvium. To examine the likelihood that seismogenic liquefaction occurred, we took samples from different areas of the landslide deposit and performed undrained cyclic shear tests on them in the laboratory. The results showed that the sandy soils that comprise most of the deposit are highly liquefiable under seismic loading. Therefore, we conclude that liquefaction of the colluvium in the valley during the earthquake was the main reason for this rapid (~46 m/s) long‐runout (1·7 km) landslide. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
14.
15.
Costanza Di Stefano Alessio Nicosia Vincenzo Palmeri Vincenzo Pampalone Vito Ferro 《水文研究》2021,35(7):e14296
Recent research recognized that the slope of 18% can be used to distinguish between the ‘gentle slope’ case and that of ‘steep slope’ for the detected differences in hydraulic variables (flow depth, velocity, Reynolds number, Froude number) and those representatives of sediment transport (flow transport capacity, actual sediment load). In this paper, using previous measurements carried out in mobile bed rills and flume experiments characterized by steep slopes (i.e., slope greater than or equal to 18%), a theoretical rill flow resistance equation to estimate the Darcy-Weisbach friction factor is tested. The main aim is to deduce a relationship between the velocity profile parameter Γ, the channel slope, the Reynolds number, the Froude number and the textural classes using a data base characterized by a wide range of hydraulic conditions, plot or flume slope (18%–84%) and textural classes (clay ranging from 3% to 71%). The obtained relationship is also tested using 47 experimental runs carried out in the present investigation with mobile bed rills incised in a 18%—sloping plot with a clay loam soil and literature data. The analysis demonstrated that: (1) the soil texture affects the estimate of the Γ parameter and the theoretical flow resistance law (Equation 25), (2) the proposed Equation (25) fits well the independent measurements of the testing data base, (3) the estimate of the Darcy-Weisbach friction factor is affected by the soil particle detachability and transportability and (4) the Darcy-Weisbach friction factor is linearly related to the rill slope. 相似文献
16.
Seismic stability of slopes has been traditionally analyzed with vertically propagated earthquake waves. However, for rock slopes, the earthquake waves might approach the outcrop still with a evidently oblique direction. To investigate the impact of obliquely incident earthquake excitations, the input method for SV and P waves with arbitrary incident angles is conducted, respectively, by adopting the equivalent nodal force method together with a viscous-spring boundary. Then, the input method is introduced within the framework of ABAQUS software and verified by a numerical example. Both SV and P waves input are considered herein for a 2D jointed rock slope. For the jointed rock mass, the jointed material model in ABAQUS software is employed to simulate its behavior as a continuum. Results of the study show that the earthquake incident angles have significance on the seismic stability of jointed rock slopes. The larger the incident angle, the greater the risk of slope instability. Furthermore, the stability of the jointed rock slopes also is affected by wave types of earthquakes heavily. P waves induce weaker responses and SV waves are shown to be more critical. 相似文献
17.
18.
The mechanism of slope instability due to rainfall-induced structural decay of earthquake-damaged loess 总被引：1，自引：0，他引：1
Hu Tao Mengmeng Zhang Li Gong Xi Shi Yijie Wang Guoqiang Yang Shaowei Lei 《地震研究进展（英文）》2022,2(3):100137
Natural loess slopes are characterized by a strong geological structure, which is an important factor in maintaining slope stability. The magnitude and duration of the earthquake may disturb the soil structure at different levels degrees, locally changing the arrangement between soil particles. The process of rainfall humidification weakens the cementation between soil particles, and the disturbance and humidification change the structural state of the soil, which in turn causes sliding of the slope along with the decay of soil mechanical properties. As slope instability is often the result of a series of post-earthquake ripple effects, it is of great scientific significance to study the mechanism of slope instability due to the structural decay of earthquake-damaged loess exacerbated by rainfall. In this paper, the impact of structural decay of loess on slope stability is simulated by GEOSTUDIO software under three conditions: pre-earthquake rainfall, post-earthquake rainfall and earthquake, taking the landslide in Buzi Village, Min County, Gansu Province as an example. The comparative analysis of the calculation results shows that the structural properties of the slope without earthquake disturbance are influenced by infiltration amount. When it is fully saturated, the structural properties are similar to those of saturated soil, and the safety factor is reduced by 12.9%. In addition, the earthquake intensity and duration have different degrees of structural damage to the soil. When the structure is fully damaged, it is similar to that of remodelled soil, and the safety factor is reduced by 45.84%. Notably, the process of the earthquake and the following humidification generates the most serious damage to the loess structure, with a reduction in the safety factor of up to 56.15%. The quantitative analysis above obviously illustrates that the post-earthquake rainfall causes the most severe damage to structural loess slopes, and the resulting landslide hazard should not be underestimated. 相似文献
19.
The growth and decay of tree roots can stir and transport soil. This is one process that contributes to the mass‐movement of soil on hillslope. To explore the efficiency of this process, we document the mounding of soil beside Ponderosa and Lodgepole pine trees in the forests that dominate the mid‐elevations of Colorado's Boulder Creek watershed. Mounds are best expressed around Ponderosa pines, reaching vertical displacements above the far‐field slopes of order 10–20 cm, fading into the slope by roughly 100 cm distance from the trunks with common diameters of 30 cm. Positive mounding occurs on all sides of trees on slopes, indicating that the mounding is not attributable to deflection of a creeping flow of soil around the tree, but rather to the insertion of root volume on all sides in the subsurface. Mounding is commonly asymmetric even on cross‐slope profiles. Significant variation in the mound sizes results in no clear relationship between tree diameter and root volume displaced. These observations motivated the development of a discrete element model of tree root growth using the LIGGGHTS model, in which grains we specified to be ‘root cells’ were allowed to enlarge within the simulated granular matrix. Mounding could be reproduced, with the majority of the vertical displacement of the surface being attributable to reduction of the bulk density due to dilation of the granular matrix during root enlargement. Finally, we develop a previous analysis of the role of roots in transporting soil during growth and decay cycles. We find that even in shallow soils, the root‐cycle can drive significant soil transport down forested montane slopes. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
20.
近断层地震动作用下土质边坡动力响应研究 总被引：1，自引：0，他引：1
根据汶川地震中滑坡多沿断层分布的特点,利用FLAC有限差分软件建立了一个土质边坡动力数值分析模型,分别研究了具有向前方向性效应、滑冲效应和无速度脉冲的近断层地震动作用下边坡的动力响应.结果表明:含速度脉冲地震动对边坡的破坏作用远强于无速度脉冲地震动,且具有滑冲效应的地震动引起的边坡动力响应稍大于向前方向性效应地震动.近断层地震作用下,边坡水平方向绝对峰值加速度分布存在沿高程放大效应.具有向前方向性效应的地震动会增强边坡加速度的高程放大效应而具有滑冲效应的地震动则在一定程度上削弱了这种放大效应,且边坡中下部绝对峰值加速度值相对于向前方向性效应地震动和无速度脉冲地震动引起的绝对峰值加速度值较大. 相似文献