共查询到20条相似文献，搜索用时 15 毫秒
1.
1999年山西大同Ms 5.6地震的震源断层 总被引：9，自引：0，他引：9
大同震区先后在 1989、1991和 1999年发生MS >5地震 ,利用大同遥测地震台网的记录资料进行比较精确的地震序列震源定位 ,结合宏观烈度分布和震源机制解资料 ,详细地分析对比了 3次子序列的异同。结果显示 ,1999年MS5 .6地震的震源断层是走向NWW、长 16km、宽12km、埋深 5km以下、倾角近直立的左旋走滑断层。而前 2个子序列是NNE为主的右旋走滑断层活动所致 ,表明地震破裂方向发生了变化。这种 2个以上方向先后出现、并且强弱有别的地震破裂是普遍存在的 ,表明震源环境的复杂程度与地震序列的类型有关。虽然震区存在NE向的大王村断裂和NW向的团堡断裂 ,但目前没有证据说明震源断层和 2条构造断层连通。 3次子序列的震源断层都是走滑断层 ,也和 2条构造正断层有别。 1999年的子序列可能属于新破裂。 相似文献
2.
2019年7月4—6日位于美国南加州城市Ridgecrest附近地区,在不足两天的时间内接连发生了一系列地震,其中包括震级达M W6.4和M W7.1的强震.震后两天对震中区产生的地表破裂进行了实地地质调查和测量,发现两次地震分别产生了NW方向长度50 km和NE方向长度10 km的两条破裂带.根据野外调查,NW方向的地表破裂表现出右旋走滑特征,是M W7.1地震产生的破裂带,而NE方向的地表破裂表现为左旋走滑性质,是M W6.4地震产生的破裂带.地表破裂野外调查和地震序列统计分析表明,NW方向是本次地震序列的主要破裂带,释放了本次地震的大部分地震矩.通过发震的时序关系和地震序列密集条带分布推断,本次地震是NE和NW两个方向应力作用下,两条共轭断层先后破裂产生的一组复杂共轭地震,推测M W6.4地震是一次强烈前震,促进了震级更大的M W7.1主震发生. 相似文献
3.
利用2010~2016年阳江地区小震资料,对围绕广东阳江6.4级地震发震构造的NEE走向平冈断层的西南段及NW走向的程村断层展布的密集地震,经双差定位方法重新进行震源位置的修定,获得了1411个精定位震源资料。依据成丛地震发生在断层附近的原则,采用模拟退火算法及高斯-牛顿算法相结合的方式,较精确地获得了2个断层面的详细参数：即平冈断层西南段走向258°、倾角85°、倾向NW,与6.4级地震的震源机制解结果十分一致,断层长度约15km并穿过了其西南端海域抵达了对岸;程村断层走向331°、倾角88°、倾向NE,长度约28km,较已有结果更长、走向也朝NE向偏转了约15°。2条陡直断层近乎垂直相交于近海,在构造应力作用下均以走滑错动为主。 相似文献
4.
Wanzheng Cheng Zhiwei Zhang Xiang Ruan Earthquake Prediction Institute Earthquake Administration of Sichuan Province Chengdu China 《地震学报(英文版)》2009,(2):109-117
Based on abundant aftershock sequence data of the Wenchuan MS8.0 earthquake on May 12, 2008, we studied the spatio-temporal variation process and segmentation rupture characteristic.Dense aftershocks distribute along Longmenshan central fault zone of NE direction and form a narrow strip with the length of 325 km and the depth between several and 40 km.The depth profile(section of NW direction) vertical to the strike of aftershock zone(NE direction) shows anisomer-ous wedgy distribution characteristic of aft... 相似文献
5.
STUDY ON SOURCE PARAMETERS OF THE 8 AUGUST 2017 M7.0 JIUZHAIGOU EARTHQUAKE AND ITS AFTERSHOCKS,NORTHERN SICHUAN 
下载免费PDF全文
下载免费PDF全文 WU Wei-wei WEI Ya-ling LONG Feng LIANG Ming-jian CHEN Xue-fen SUN Wei ZHAO Jing 《地震地质》1979,42(2):492-512
On August 8, 2017, a strong earthquake of M7.0 occurred in Jiuzhaigou County, Aba Prefecture, northern Sichuan. The earthquake occurred on a branch fault at the southern end of the eastern section of the East Kunlun fault zone. In the northwest of the aftershock area is the Maqu-Maqin seismic gap, which is in a locking state under high stress. Destructive earthquakes are frequent along the southeast direction of the aftershocks area. In Songpan-Pingwu area, only 50~80km away from the Jiuzhaigou earthquake, two M7.2 earthquakes and one M6.7 earthquake occurred from August 16 to 23, 1976. Therefore, the Jiuzhaigou earthquake was an earthquake that occurred at the transition part between the historical earthquake fracture gap and the neotectonic active area. Compared with other M7.0 earthquakes, there are few moderate-strong aftershocks following this Jiuzhaigou earthquake, and the maximum magnitude of aftershocks is much smaller than the main shock. There is no surface rupture zone discovered corresponding to the M7.0 earthquake. In order to understand the feature of source structure and the tectonic environment of the source region, we calculate the parameters of the initial earthquake catalogue by Loc3D based on the digital waveform data recorded by Sichuan seismic network and seismic phase data collected by the China Earthquake Networks Center. Smaller events in the sequence are relocated using double-difference algorithm; source mechanism solutions and centroid depths of 29 earthquakes with ML≥3.4 are obtained by CAP method. Moreover, the source spectrum of 186 earthquakes with 2.0≤ML≤5.5 is restored and the spatial distribution of source stress drop along faults is obtained. According to the relocations and focal mechanism results, the Jiuzhaigou M7.0 earthquake is a high-angle left-lateral strike-slip event. The earthquake sequence mainly extends along the NW-SE direction, with the dominant focal depth of 4~18km. There are few shallow earthquakes and few earthquakes with depth greater than 20km. The relocation results show that the distribution of aftershocks is bounded by the M7.0 main shock, which shows obvious segmental characteristics in space, and the aftershock area is divided into NW segment and SE segment. The NW segment is about 16km long and 12km wide, with scattered and less earthquakes, the dominant focal depth is 4~12km, the source stress drop is large, and the type of focal mechanism is complicated. The SE segment is about 20km long and 8km wide, with concentrated earthquakes, the dominant depth is 4~12km, most moderate-strong earthquakes occurred in the depth between 11~14km. Aftershock activity extends eastward from the start point of the M7.0 main earthquake. The middle-late-stage aftershocks are released intensively on this segment, most of them are strike-slip earthquakes. The stress drop of the aftershock sequence gradually decreases with time. Principal stress axis distribution also shows segmentation characteristics. On the NW segment, the dominant azimuth of P axis is about 91.39°, the average elevation angle is about 20.80°, the dominant azimuth of T axis is NE-SW, and the average elevation angle is about 58.44°. On the SE segment, the dominant azimuth of P axis is about 103.66°, the average elevation angle is about 19.03°, the dominant azimuth of T axis is NNE-SSW, and the average elevation angle is about 15.44°. According to the fault profile inferred from the focal mechanism solution, the main controlling structure in the source area is in NW-SE direction, which may be a concealed fault or the north extension of Huya Fault. The northwest end of the fault is limited to the horsetail structure at the east end of the East Kunlun Fault, and the SE extension requires clear seismic geological evidence. The dip angle of the NW segment of the seismogenic fault is about 65°, which may be a reverse fault striking NNW and dipping NE. According to the basic characteristics of inverse fault ruptures, the rupture often extends short along the strike, the rupture length is often disproportionate to the magnitude of the earthquake, and it is not easy to form a rupture zone on the surface. The dip angle of the SE segment of the seismogenic fault is about 82°, which may be a strike-slip fault that strikes NW and dips SW. The fault plane solution shows significant change on the north and south sides of the main earthquake, and turns gradually from compressional thrust to strike-slip movement, with a certain degree of rotation. 相似文献
6.
Five mobile digital seismic stations were set up by the Earthquake Administration of Yunnan Province near the epicenter of the main shock after the Ning’er M6.4 earthquake on June 3, 2007. In this paper, the aftershock sequence of the Ning’er M6.4 earthquake is relocated by using the double difference earthquake location method. The data is from the 5 mobile digital seismic stations and the permanent Simao seismic station. The results show that the length of the aftershock sequence is 40km and the width is 30km, concentrated obviously at the lateral displacement area between the Pu’er fault and the NNE-trending faults, with the majority occurring on the Pu’er fault around the main shock. The depths of aftershocks are from 2km to 12km, and the predominant distribution is in the depth of 8～10km. The mean depth is 7.9km. The seismic fault dips to the northwest revealed from the profile parallel to this aftershock sequence, which is identical to the dip of the secondary fault of the NE-trending Menglian-Mojiang fault in the earthquake area. There are more earthquakes concentrated in the northwest segment than in the southeast segment, which is perhaps related to the underground medium and faults. The depth profile of the earthquake sequence shows that the relocated earthquakes are mainly located near the Pu’er fault and the seismic faults dip to the southwest, consistent with the dip of the west branch of the Pu’er fault. In all, the fault strike revealed by earthquake relocations matches well with the strike in the focal mechanism solutions. The main shock is in the top of the aftershock sequence and the aftershocks are symmetrically distributed, showing that faulting was complete in both the NE and SW directions. 相似文献
7.
RESTUDY ON HYPOCENTRAL LOCATION AND SEISMOGENIC TECTONIC OF THE JIUJIANG-RUICHANG MS5.7 EARTHQUAKE SEQUENCE,JIANGXI PROVINCE 下载免费PDF全文
下载免费PDF全文 We collected seismic records of 228 ML≥1.0 Jiujiang-Ruichang MS5.7 earthquake sequence from Dec.26, 2005 to Jun. 30, 2006. By using double-difference method combined with waveform cross-correlation, those earthquakes were relocated and finally the accurate source parameters of 224 earthquakes were obtained. The errors are about 0. 5km in horizontal and less than 2km in vertical direction, respectively. It was found that the depth of earthquake sequence concentrates in 8~14km range, and the epicenters are distributed along both NW and NE direction, and dominantly along NW direction. Combined with the focal mechanism, the distribution direction and the tectonic setting, we infer that the rupture of the NW-trending fault caused the MS5. 7 main shock, and then the rupture probably encountered an asperity and triggered the MS4. 8 strong aftershock. The NE-trending fault came into a seismically quiet period by stress adjustment in a short time, while the NW-trending fault released stress for a long time which caused a series of aftershocks. The MS5. 7 main shock is caused by the NW striking Yangjisshan-Wushan-Tongjiangling Fault and the MS4. 8 aftershock occurred on the NE striking Liujia-Fanjiapu-Chengmenshan Fault. 相似文献
8.
本文利用主地震相对定位法,对2014年鲁甸MS6.5地震序列中的8月3日—9月30日地震进行了重新定位,借助于时空图像分析方法,对本次地震破裂过程进行了分析,得到如下结果:(1)2014年鲁甸MS6.5地震主要沿NW向破裂,存在沿NE向破裂的成分,但是NE向破裂并不明显;(2)地震破裂时,主要从主震震中处往ES方向传播,破裂带长度大约为10km,破裂面近乎直立;(3)余震活动主要集中于主震上方区域,震源深度大于主震的余震稀少.根据上述结果,结合当地的地震构造情况和本次地震的震源机制解,分析表明,本次地震的破裂面为NW向,其发震断层为包谷垴—小河断裂的可能性很大. 相似文献
9.
The 2018,Songyuan,Jilin M_S5. 7 earthquake occurred at the intersection of the FuyuZhaodong fault and the Second Songhua River fault. The moment magnitude of this earthquake is M_W5. 3,the centroid depth by the waveform fitting is 12 km,and it is a strike-slip type event. In this paper,with the seismic phase data provided by the China Earthquake Network, the double-difference location method is used to relocate the earthquake sequence,finally the relocation results of 60 earthquakes are obtained. The results show that the aftershock zone is about 4. 3km long and 3. 1km wide,which is distributed in the NE direction. The depth distribution of the seismic sequence is 9km-10 km. 1-2 days after the main shock,the aftershocks were scattered throughout the aftershock zone,and the largest aftershock occurred in the northeastern part of the aftershock zone. After 3-8 days,the aftershocks mainly occurred in the southwestern part of the aftershock zone. The profile distribution of the earthquake sequence shows that the fault plane dips to the southeast with the dip angle of about 75°. Combined with the regional tectonic setting,focal mechanism solution and intensity distribution,we conclude that the concealed fault of the Fuyu-Zhaodong fault is the seismogenic fault of the Songyuan M_S5. 7 earthquake. This paper also relocates the earthquake sequence of the previous magnitude 5. 0 earthquake in 2017. Combined with the results of the focal mechanism solution,we believe that the two earthquakes have the same seismogenic structure,and the earthquake sequence generally develops to the southwest. The historical seismic activity since 2009 shows that after the magnitude 5. 0 earthquake in 2017,the frequency and intensity of earthquakes in the earthquake zone are obviously enhanced,and attention should be paid to the development of seismic activity in the southwest direction of the earthquake zone. 相似文献
10.
采用双差定位法对山东莱州地震序列重新定位,通过CAP方法反演M4.6地震震源机制,在此基础上初步探讨莱州地震序列发震构造。结果显示:精确定位震中位置主要位于柞村—仙夼断裂的NW方向,深度剖面显示从SE方向到NW方向断层深度呈由浅逐渐变深的趋势,这均与柞村—仙夼断裂位置、走向、倾向特征较为吻合;M4.6地震震源机制解的节面Ⅰ与柞村—仙夼断裂走向、倾角较为接近。综合精确定位震中位置、剖面深度分布特征、M4.6地震震源机制解及宏观调查烈度分布等结果与柞村-仙夼断裂产状之间的关系,初步推测柞村—仙夼断裂可能为莱州地震序列的发震断层。 相似文献
11.
唐山地震序列空间分布复杂性原因研究 总被引：2，自引：0，他引：2
本文采用唐山地震序列定位精度较高的资料, 对不同时段余震震中分布进行再分析, 取得了余震密集带和序列3次强震(唐山7.8级、 滦县7.1级、 宁河6.9级)破裂面分布的清晰图像, 其中判定7.1级地震为NWW向破裂面。 其复杂图像与震前地震活动异常所揭示的震源及与震源孕育有关的三组区域性断裂带存在密切联系。 简单说来, 震源位于NE向、 NWW向、 NW向三组断裂带交汇的区域, 位于震源的余震密集带显示了这3次强震的破裂面, 它们分别可看作是三组区域断裂的闭锁段。 据此解释了形成唐山地震震源和序列震中分布复杂性的原因。 相似文献
12.
Long Sisheng 《中国地震研究》2004,18(3):212-224
The Yajiang earthquake sequence in 2001, with the major events of Ms5.1 on Feb. 14 and of Ms6.0 on Feb.23, are significant events in the Sichuan region during the last 13 years. Eighty-eight earthquakes in the sequence with at least 5 distinct onset parameters for each recorded by the Sichuan Seismic Network in the period of Jan. 1 through June 30,2001 were chosen for this study. The events are relocated and the focal mechanism is derived from P-wave onsets for 13 events with relatively larger magnitudes. The focal depth of all earthquakes fall between a range of 2km to 16km, with dominant distribution between 9km to 11km. Theforeshocks, the Ms5.1 earthquake and the Ms6.0 earthquake and their aftershocks are all located close to the Zihe fault and the dominant epicentral distribution is in NW direction, identical to that of the fault. The fracture surface of the focal mechanism is determined in accordance to the mass transfer orientation in the recent earth deformation field in the Yajiang region. The P axes of the principal compressive stress in focal mechanism solutions of the 13 events show bigger vertical components, and the horizontal projection trending SE. The earthquakes are of left-lateral, strike-slip normal, and normal strike-slip types. The rupture surface of most earthquakes strike NW-SE, dipping SW. Based on the above information, we conclude that the Zihe fault that crosses the earthquake area, striking NW and dipping SW, is the seismogenic fault for the Yajiang earthquake sequence. 相似文献
13.
Based on relocating the Jiujiang-Ruichang earthquake sequence which occurred on November 26, 2005 in Jiangxi Province with the double-difference （DD） algorithm and master event technique, the paper discusses the focal mechanism of the main shock （MsS.7） and the probable seismo-tectonics. The precise relocation results indicate that the average horizontal error is 0.31kin in a EW direction and 0.40kin in a NS direction, and the average depth error is 0.48kin. The focal depths vary from 8kin to 14kin, with the predominant distribution at 10kin - 12kin. The epicenter of the main shock is relocated to be 29.69^oN, 115.74^oE and the focal depth is about 10.Skin. Combining the predominant distribution of the earthquake sequence, the focal mechanism of the main shock and the tectonic conditions of N-E- and NW-strike faults growth in the seismic region, we infer that the main shock of the earthquake sequence was caused by a NW striking buried fault in the Rnichang basin. The nature of seismic faults needs to be further explored. 相似文献
14.
基于新疆区域数字地震台网震相观测报告, 采用双差定位方法对2019年新疆疏附MS5.1地震序列ML≥1.0地震进行重定位, 采用CAP波形反演方法, 获得了主震的震源机制解和震源矩心深度, 进而综合分析了本次地震可能的发震构造。 结果表明, 疏附5.1级地震震源位置为39.59°N, 75.57°E, 初始破裂深度为18 km, 震源矩心深度为18 km。 重定位后的地震序列呈两个优势方向展布, 分别为NEE向和NE向分支, NEE向为主要的余震优势分布区域, 呈长约13 km窄带状分布在喀什断裂附近。 另一条优势分布为沿NE向长度约9 km, 这可能与喀什断裂阶区有关。 深度剖面显示, 地震震源深度主要集中分布在8~20 km。 沿NEE走向深度剖面显示, 疏附5.1级地震破裂于深部, 余震沿优势分布的震源深度自SWW向NEE呈现逐渐加深的变化特征。 垂直于震中优势分布的深度剖面显示, 本次地震发震断层面倾向为N倾。 震源机制解显示本次地震断错类型为逆冲型, 结合震源深度剖面特征推断节面Ⅰ为本次地震的发震断层面。 综合地震序列空间分布特征、 震源机制以及震源区地质资料, 推测此次地震的发震构造可能为喀什断裂, 余震向浅部扩展。 相似文献
15.
1998年张北6.2级地震宏观烈度 总被引：10，自引：2，他引：10
充分利用震害评估和宏观考察的资料 ,采用震害程度和震害指数 2个标准共同确定了1 998年张北 6.2级地震的宏观烈度。极震区烈度为 度 ,呈 NWW和 NNE双向分布 ,以NWW为主 ,面积 1 35km2 。 度区呈 NE、NW双向伸展图象 ,但是 SE方向伸展不足 ,面积约340 km2。地震重伤人员普遍集中在 度区和 度区。 度区亦呈 NE、NW双向伸展图象 ,但是 NW、SW方向延伸长 , 度区面积约 1 0 0 0 km2 。宏观震中 :北纬 41°0 9′,东经 1 1 4°2 7′。在极震区的 NNE、SSW和 NWW方向 ,存在 3个烈度异常区 ,它们分别在极震区 3个分支的延伸方向上。文中讨论了烈度不高而震后较重的原因。震区没有发现地表破裂带 ,也没有发现第四纪强烈活动的大型断裂。极震区为主的 NWW方向和震前存在的小地震条带吻合 ,暗示可能存在成因上的联系 相似文献
16.
山东乳山地区震群特征及发震背景再研究 总被引：1，自引：1，他引：0
2013年10月1日在山东省威海市乳山市发生M3.2级地震,之后发生了一系列震群活动。截至2016年5月,山东台网已经记录到了1万多次余震,其中3级以上地震9次,4级以上地震3次。频繁的地震构造活动引起了乳山市及周边地区强烈震感。为研究乳山震群的发震机理,本文利用山东台网数字化地震波资料和新建的乳山台阵资料,通过双差精定位方法重新确定了震中位置。研究结果表明:余震序列呈现出NW向的条带分布;采用CAP方法（Cut and Paste）反演震群中9次3级以上地震的震源机制解,结果显示几次较大地震的震源深度平均约为5km,与台网编目定位的结果基本相同。从得到的精定位结果并结合震源机制解的结果来看,震群的走向是NW向,倾角是NE向,与最近的乳山断裂有一定距离。由此推断该区域可能是乳山断裂的分支,或者有一条或多条隐伏断裂。 相似文献
17.
DISCUSSION ON RUPTURE CHARACTERISTICS OF THE 2013 TONGLIAO M5.3 EARTHQUAKE AND ITS AFTERSHOCKS 下载免费PDF全文
下载免费PDF全文 On two velocity models, the HypoDD method is used to accurately locate the Tongliao M5.3 earthquake sequence, then the CAP method is used to invert the focal mechanism solutions. The parameters of the seismogenic fault plane are fitted quantitatively by the small earthquake distribution and the regional stress field. The geometry, rupture features and possible seismogenic structure of the Tongliao M5.3 earthquake are comprehensively determined. The HypoDD relocation results show that this earthquake is located at 42.95°N, 122.37°E, the whole sequence trends in NW and major aftershocks (ML ≥ 3.0) strike in NEE direction. With the time elapsed, the aftershocks extended to the shallow crust gradually. Comparing the focal mechanism solutions and relocation results, we determine that the fitted causative fault based on NNW-trending aftershock distribution is reliable, which has the top left corner (43.00°N, 122.35°E, depth 3.3km), lower left corner (43.00°N, 122.35°E, depth 8.9km), upper right corner (42.92°N, 122.37°E, depth 3.3km), lower right corner (42.92°N, 122.37°E, depth 8.9km), extending range 3km×7km, trending in 349° (NNW), dip angle 86° (nearly vertical), and slip angle 15°. It is inferred that whole process of main shock rupture is from the source to the NW and SE sides as a shear. The rupture degree is larger in southeast where the late rupture concentrated, and did not reach the surface. 相似文献
18.
利用双差定位方法对西藏比如MS6.1地震序列141次ML≥2.0地震进行重新定位,采用CAP波形反演方法获得主震的震源机制解,并运用最小空间旋转角方法比较不同机构发布的震源机制解的差异。重新定位后主震震中位置为(31.924°N,92.824°E),靠近余震区中心,震源深度为12.8 km;余震分布沿NE向展布,长约18 km。沿NE向深度剖面结果显示,在主震右上方存在5 km×10 km的近椭圆形地震破裂空区。主震的震源机制解为正断兼走滑型,最佳矩心深度为9.3 km,矩震级为5.98。结合重新定位后余震分布、主震与历史地震震源机制解及地质构造背景等分析,认为具有左旋运动性质的安多南缘断裂可能是该次地震序列的主要发震构造。 相似文献
19.
采用远场地震波资料和有限断层反演方法获得2021年7月29日6时15分(UTC)美国阿拉斯加州以南海域MW8.2地震的震源破裂过程模型,探讨此次地震发生的动力学背景。破裂过程反演的结果显示这次地震的滑动量分布比较集中,破裂长度约为160km,地震主体破裂发生在20～40km深度范围内,破裂由深部向浅部发展,表明此次地震释放了俯冲带浅部的应变能,破裂持续时间近120s,破裂面上最大滑移量达5m。此外,主震破裂区域中的余震分布较小,大部分余震发生在主震南部,出现这种现象表明震源区的破裂较为彻底并触发了俯冲带浅部位置的地震,本次地震的有限断层反演结果和余震分布均显示破裂向东发展,但未破裂至震中以西的舒马金空区,表明舒马金空区东部的地震危险性仍然存在。 相似文献
20.
利用双差地震定位方法对2003年10月25日民乐-山丹地震序列进行重新定位.结果显示:余震分布的优势方向为NW向,与震源区的区域构造环境相一致;主震位于余震序列的东南端,余震相对于主震的分布并不对称.本次地震为朝NW方向的单侧破裂,在ES方向上破裂遇到了障碍体. 相似文献