共查询到19条相似文献，搜索用时 187 毫秒
1.
显式云物理方案的研究进展 总被引：4，自引：1，他引：4
回顾了近年来显式云物理方案的研究进展。显式云方案主要有体积水方法和详细微物理方法(分档法)。体积水方法有单参数和双参数两种谱描述方法,根据模式预报变量和物理过程的不同,可以分为暖云方案、简单冰相方案和复杂冰相方案。详细的微物理方法由于预报变量繁多、计算量巨大而一般多应用于研究工作。不同的模式,有不同的显式云方案,并不是粒子分类越复杂模拟效果就越好,需要根据研究的重点、计算资源的许可选择使用不同的物理方案。物理过程参数化需要建立在理论和实验研究的基础上,因此应加强这方面的理论和实验研究,使物理参数化具有更坚实的物理基础。 相似文献
2.
3.
4.
各种非绝热物理过程在中尺度模式中的作用 总被引：47，自引：6，他引：41
随着中尺度模式水平分辨率的不断提高,考虑加入尽可能合理的各种非绝热物理过程极为重要。如积云参数化需包括湿下沉气流、中上层的云卷出和非降水性浅对流。显式云物理方案需同时加入含有水相和冰相的预报方程,以计入水负荷、凝结蒸发、冻结融化和凝华升华的影响。本文首先从实测角度介绍上述物理过程在产生中β尺度环流结构的作用,然后通过一些敏感性数值试验来阐述它们如何帮助成功模拟不同的中尺度对流系统。这些物理过程的相对作用取决于网格距大小或可分辨尺度垂直运动的强度。当网格距在20～50 km之间,本文特别强调积云参数化和显式云物理方案的同时使用。最后对各种非绝热物理过程的耦合以及中尺度模式的局限性作了适当讨论。 相似文献
5.
云模式中气溶胶物理过程参数化方案研究概述 总被引：2，自引：1，他引：2
介绍了大气气溶胶的浓度、气溶胶的谱形等物理性质对云的微物理过程造成的影响以及目前云模式中常用到的一些气溶胶物理过程的体积水、分档等参数化方案，并评述了这些参数化方案各自的特点。提出了在设计气溶胶物理过程参数化方案时需要注意和有待解决的几个问题，建议在设计气溶胶-云相互作用的模式时，要根据不同的研究目的选择合适的参数化方案。 相似文献
6.
中尺度模式湿物理过程和物理初始化方法 总被引：11，自引：1，他引：11
文章评述了中尺度模式中湿物理过程，特别是显式云降水方案和物理初始化方法研究的最新动态，分析了显式云降水方案的优势和应用潜力。 相似文献
7.
积云对流和云物理过程调整对气候模拟的影响 总被引：1，自引：1，他引：0
本文利用中国科学院大气物理研究所大气科学和地球流体力学数值模拟国家重点实验室 (LASG/IAP) 的大气环流谱模式SAMIL, 结合观测与政府间气候变化专门委员会第四次评估报告 (IPCC AR4) 大气模式集合平均结果, 以大气辐射通量为例, 诊断分析了物理过程调整前后模式对气候模拟的影响。旧版本SAMIL对大气辐射通量的模拟存在较大偏差, 经过大气辐射过程、 积云对流和诊断云等物理过程的调整后, 新版本SAMIL模拟的全球辐射通量的年平均结果与观测的偏差大幅减小, 其中大气顶能量收支的年变化及其平均值与观测更为接近。在积云对流方案调整基础上, 通过对诊断云物理方案的进一步调整, 新版本SAMIL对云物理量模拟更为合理, 在赤道辐合带等区域, 在很大程度上克服了单一积云对流物理过程调整引起的云宏观和微观属性不匹配问题, 能模拟出夏季气候平均辐射通量的全球分布特征, 尤其在东亚区域有较好的模拟能力。研究还表明, 在热带和副热带对流活跃区域, 当前SAMIL中积云对流过程偏差对辐射通量的模拟偏差有很大影响, 而模式中较为简单的诊断云方案也会将云宏观物理量模拟偏差带入云微观量模拟中, 也是主要偏差源之一。本文结果表明, 要继续提高SAMIL的模拟性能, 急需更新云物理参数化方案以改进云辐射过程的模拟, 同时也需要有针对性的研究积云对流和云物理过程之间相互作用, 并作进一步协同调整。 相似文献
8.
非绝热物理过程在模拟飑线系统中β尺度结构中的作用 总被引：1，自引：0，他引：1
利用经改进的中尺度模式，对一次飑线过程进行了多种对流参数化和显式水汽方案及地面加热过程的敏感性试验，结果表明中尺度对流性天气系统的成功预报，不仅取决于次网格尺度对流，而且取决于可分辨尺度相变过程及地面加热引起的边界层日变化。计入湿下沉的Ｆｒｉｔｓｃｈ－Ｃｈａｐｐｅｌｌ对流参数化方案和计入可分辨尺度凝结蒸发冻结融化等相变过程的预诊性显式方案的结合使用，对于真实模拟飑线等中尺度对流系统和减少或消除与中尺度涡旋及其降水过度加强相联系的类ＣＩＳＫ不稳定是十分必要和有效的。 相似文献
9.
10.
中尺度模式中各种湿物理过程的数值模拟 总被引：14，自引：1，他引：14
利用PSU／NCAR的MM5对1999年6月下旬发生在江淮流域的梅雨锋暴雨进行数值模拟试验，研究MM5中不同湿物理过程中对MM5模拟梅雨锋暴雨的影响。试验结果显示：中尺度模式MM5能一定程度再现一些观测的中尺度特征，对流参数化方案对网格格距的大小比较敏感；显式云物理方案考虑冰相后可明显改善模式对暴雨的模拟能力，尤其是采用Reisner包含霰的混合相双变参数谱方案的双重嵌套网格对降水量的模拟取得较好的效果。 相似文献
11.
不同降水方案对"03.7"一次暴雨过程模拟的影响 总被引：4，自引：0，他引：4
观测和数值模拟研究已经表明,潜热释放对中国东部夏季梅雨锋系统及其锋面降水的维持和发展发挥着非常重要的作用.然而,目前对于梅雨锋降水模拟中各种降水方案的相互协调和系统评估方面的工作仍不多见,为了增进对梅雨锋暴雨模拟中降水过程的认识,作者针对2003年7月4～5日一次梅雨锋暴雨过程,构造了四组试验,利用MM5模式考察了两种分辨率(36 km、12 km),各种隐/显式方案搭配下,对所生成的雨带、雨量和降水类型的配置进行了仔细的研究,得到了一些有意义的结论,为今后更好地使用模式、利用数值模式来认识中尺度降水过程中的气象问题打下基础.主要结论包括:模拟总降水的水平分布和强度,以及显式降水和隐式降水的划分对积云参数化方案的选择非常敏感.但对特定积云参数化方案而言,降水的模拟对36 km、12 km水平分辨率不敏感(除Betts-Miller方案外);在中尺度网格分辨率10～50 km范围内,不同积云参数化方案对梅雨锋降水分布和降水量模拟的影响比不同显式方案带来的变化大得多. 相似文献
12.
13.
MIXED-PHASE STRATIFORM CLOUD SYSTEM MODEL AND CASE MODELING ON TWO LOW-LEVEL MESOSCALE VORTICES 
下载免费PDF全文
下载免费PDF全文 We introduced the two-parameter stratiform cloud model of Hu and Yan (1986) into the mesoscale model of Anthes et al.(1987),and reprogramed the latter,then constructed a three-dimensional stratiform cloud system model which includes three phases of water and detailed cloud physical processes.For the stability and accuracy of calculation in a larger time step,we accepted a set of hybrid-schemes for all and the time split scheme for some of the cloud physical processes,and proposed a parameterized method which calculates different types of phase change processes simultaneously,and designed the falling schemes of particles following the Lagrangian method.We used a dry model,a cumulus parameterization model,a two-phase explicit scheme model,and the model presented here to simulate two low-level mesoscale vortices,compared and analysed the simulating capability of these models.The results show that in simulation of the circulation structure of meso-vortex,the structure of cloud system,and surface precipitation,the model presented here is more reasonable and closer to the observations than other models. 相似文献
14.
A Simulation Study on the Characteristics of Cloud Microphysics of
Heavy Rainfall in the Meiyu Front 下载免费PDF全文
下载免费PDF全文 A heavy rainfall in the Meiyu front during 4--5 July 2003 is simulated by use of the non-hydrostatic mesoscale model MM5 (V3--6) with different explicit cloud microphysical parameterization schemes. The characteristics of microphysical process of convective cloud are studied by the model outputs. The
simulation study reveals that: (1) The mesoscale model MM5 with explicit cloud microphysical process is capable of simulating the instant heavy rainfall in the Meiyu front, the rainfall simulation
could be improved significantly as the model resolution is increased, and the Goddard scheme is better than the Reisner or Schultz scheme. (2) The convective cloud in the Meiyu front has a
comprehensive structure composed of solid, liquid and vapor phases of water, the mass density of water vapor is the largest one in the cloud; the next one is graupel, while those of ice, snow, rain
water and the cloud water are almost same. The height at which mass density peaks for different hydrometeors is almost unchangeable during the heavy rainfall period. The mass density variation of rain water, ice, and graupel are consistent with that of ground precipitation, while that of water vapor in the low levels is 1--2 h earlier than the precipitation. (3) The main contribution to the water vapor budget in the atmosphere is the convergence of vapor flux through advection and convection, which provides the main vapor source of the rainfall. Besides the basic process of the auto-conversion of cloud water to rain water, there is an additional cloud microphysical process that is essential to the formation of instant heavy rainfall, the ice-phase crystals are transformed into graupels first and then the increased graupels mix with cloud water and accelerates the conversion of cloud water to rain water. The positive feedback mechanism between latent heat release and convection is the main cause to maintain and develop the heavy precipitation. 相似文献
15.
An ensemble prediction system based on the GRAPES model, using multi-physics, is used to discuss the influence of different physical processes in numerical models on forecast of heavy rainfall in South China in the annually first raining season(AFRS). Pattern, magnitude and area of precipitation, evolution of synoptic situation, as well as apparent heat source and apparent moisture sink between different ensemble members are comparatively analyzed. The choice of parameterization scheme for land-surface processes gives rise to the largest influence on the precipitation prediction. The influences of cumulus-convection and cloud-microphysics processes are mainly focused on heavy rainfall;the use of cumulus-convection parameterization tends to produce large-area and light rainfall. Change in parameterization schemes for land-surface and cumulus-convection processes both will cause prominent change in forecast of both dynamic and thermodynamic variables, while change in cloud-microphysics processes show primary impact on dynamic variables. Comparing simplified Arakawa-Schubert and Kain-Fritsch with Betts-Miller-Janjic schemes, SLAB with NOAH schemes, as well as both WRF single moment 6-class and NCEP 3-class with simplified explicit schemes of phase-mixed cloud and precipitation shows that the former predicts stronger low-level jets and high humidity concentration, more convective rainfall and local heavy rainfall, and have better performance in precipitation forecast. Appropriate parameterization schemes can reasonably describe the physical process related to heavy rainfall in South China in the AFRS, such as low-level convergence, latent heat release, vertical transport of heat and water vapor, thereby depicting the multi-scale interactions of low-level jet and meso-scale convective systems in heavy rainfall suitably, and improving the prediction of heavy rainfall in South China in the AFRS as a result. 相似文献
16.
利用NCEP FNL再分析资料为初始场,通过WRF中尺度数值模式(V3.9.1版本)对2015年8月26~27日青藏高原那曲地区一次对流云降水过程进行了模拟,分析了不同积云对流参数化方案和云微物理参数化方案组合对本次降水过程中降水量、环流场、雷达反射率以及云微物理特征模拟效果的影响。结果表明:WRF模式能较好地模拟出本次降水的时空变化特征,但不同参数化方案组合各有优势,总体而言,Grell-Devenyi+SUBYLIN和Grell-Freitas+SUBYLIN组合模拟性能最优。本次对流云降水以冰相过程为主,雪粒子贡献最大,暖云粒子对降水的影响并不明显。从云微物理过程的时间演变可看出,性能最好的SUBYLIN方案能合理模拟降水过程中雪粒子与冰晶粒子间的转换过程,雪粒子可在凝结过程中释放潜热促使对流运动发展,也可通过融化过程促进降水发生,对流层高层冰晶粒子凝华产生的潜热释放亦为深对流的发展创造了有利条件。 相似文献
17.
霰粒子下落速度对云系及降水发展影响的数值研究 总被引：1，自引：0，他引：1
云和降水的形成是动力过程与微物理过程相瓦作用的产物,云数值模式中的微物理过程参数化方案对云和降水发展过程有直接影响.在云数值模式中,粒子群体的下落速度都足用质量加权下落末速度公式来表达,而且不同的模式采用的公式存在差异,质量加权下落末速度中参数取值不同,引起的粒子下落末速度不同.为了了解粒子下落末速度变化对云系和降水发展的影响,对2004年8月12日一次冷锋降水过程,利用中尺度ARPS模式做模拟研究.在分析降水机制的基础上,对霰这一下落末速度较大的降水粒子,做下落末速度(Vg)的敏感性试验,从动力、热力、微物理的角度,通过数值模拟对比分析了霰下落末速度减小对降水分布和强度、云系的移动、云系的宏观热力和动力场的影响,并给出了影响的途径和机理.结果表明:Vg变化对云的厚度和含水量有影响,下落末速度减小对冰晶、雪、霰的含水量垂直分布及分布随时间变化影响较大,其中,霰的含水量显著减少,雪的含水量增加,并调整了云中水质粒的空间分布;Vg减小对地面累积总降水量的分布影响较小,但对降水强度的分布影响较大.Vg减小时,降水强度减小,降水时间延迟,因此,霰下落末速度变化将调整底层降水分布;对于云系的移动情况基本上没有影响,但对云中水质粒的空间分布有影响;霰下落末速度变化影响云中霰的融化和撞冻增长从而影响热力场.末速度减小时,霰和雪的融化罱明显减小,导致非绝热冷却率的减小,引起下沉气流的减小. 相似文献
18.
Jamaludin Suhaila S. M. Deni Wan Zawiah Wan Zin Abdul Aziz Jemain 《Meteorology and Atmospheric Physics》2010,106(1-2):1-18
Model precipitation can be produced implicitly through convective parameterization schemes or explicitly through cloud microphysics schemes. These two precipitation production schemes control the spatial and temporal distribution of precipitation and consequently can yield distinct vertical profiles of heating and moistening in the atmosphere. The partition between implicit and explicit precipitation can be different as the model changes resolutions. Within the range of mesoscale resolutions (about 20 km) and cumulus scale, hybrid solutions are suggested, in which cumulus convection parameterization is acting together with the explicit form of representation. In this work, it is proposed that, as resolution increases, the convective scheme should convert less condensed water into precipitation. Part of the condensed water is made available to the cloud microphysics scheme and another part evaporates. At grid sizes smaller than 3 km, the convective scheme is still active in removing convective instability, but precipitation is produced by cloud microphysics. The Eta model version using KF cumulus parameterization was applied in this study. To evaluate the quantitative precipitation forecast, the Eta model with the KF scheme was used to simulate precipitation associated with the South Atlantic Convergence Zone (SACZ) and Cold Front (CF) events. Integrations with increasing horizontal resolutions were carried out for up to 5 days for the SACZ cases and up to 2 days for the CF cases. The precipitation partition showed that most of precipitation was generated by the implicit scheme. As the grid size decreased, the implicit precipitation increased and the explicit decreased. However, as model horizontal resolution increases, it is expected that precipitation be represented more explicitly. In the KF scheme, the fraction of liquid water or ice, generated by the scheme, which is converted into rain or snow is controlled by a parameter S 1. An additional parameter was introduced into KF scheme and the parameter acts to evaporate a fraction of liquid water or ice left in the model grid by S 1 and return moisture to the resolved scale. An F parameter was introduced to combine the effects of S 1 and S 2 parameters. The F parameter gives a measure of the conversion of cloud liquid water or ice to convective precipitation. A function dependent on the horizontal resolution was introduced into the KF scheme to influence the implicit and explicit precipitation partition. The explicit precipitation increased with model resolution. This function reduced the positive precipitation bias at all thresholds and for the studied weather systems. With increased horizontal resolution, the maximum precipitation area was better positioned and the total precipitation became closer to observations. Skill scores for all events at different forecast ranges showed precipitation forecast improvement with the inclusion of the function F. 相似文献
19.
城市冠层过程的研究与进展 总被引：5，自引：1，他引：5
介绍了城市冠层过程研究的概况和历史,概括了城市冠层的特征及其作用于局地气候和中尺度系统的主要方式,总结了城市冠层参数化方案或模式的研究进展.比较了几种参数化方法和模式的特点,提出目前存在的一些问题.认为：现有的参数化方案和模式尚未能完整体现城市下垫面特征、准确反映人类活动影响,二者的发展有赖于对城市下垫面建筑特征更合理、细致地描述,对人为热量、水汽影响更准确的估计与刻划.与局地因素密切相关的城市冠层模式还需要更多地在模式中引入局地差异影响.同时指出,要提高耦合城市过程的中尺度模式预报水平,需要相应改进包括云、降水、次网格地形及边界层动力学等的参数化. 相似文献