共查询到20条相似文献，搜索用时 46 毫秒
1.
This paper has shown a numerical motion simulation method which can be employed to study on parametric rolling of ships in a seaway. The method takes account of the main nonlinear terms in the rolling equation which stabilize parametric rolling, including the nonlinear shape of the righting arm curve, nonlinear damping and cross coupling among all 6 degrees of freedom. For the heave, pitch, sway and yaw motions, the method uses response amplitude operators determined by means of the strip method, whereas the roll and surge motions of the ship are simulated, using nonlinear motion equations coupled with the other 4 degrees of freedom. For computing righting arms in seaways, Grim's effective wave concept is used. Using these transfer functions of effective wave together with the heave and pitch transfer functions, the mean ship immersion, its trim and the effective regular wave height are computed for every time step during the simulation. The righting arm is interpolated from tables, computed before starting the simulation, depending on these three quantities and the heel angle. The nonlinear damping moment and the effect of bilge keels are also taken into account. The numerical simulation tool has shown to be able to model the basic mechanism of parametric rolling motions. Some main characteristics of parametric rolling of ships in a seaway can be good reproduced by means of the method. Comprehensive parametric analyses on parametric rolling amplitude in regular waves have been carried out, with that the complicated parametric rolling phenomena can be understood better. 相似文献
2.
The prediction of ship stability during the early stages of design is very important from the point of vessel’s safety. Out of the six motions of a ship, the critical motion leading to capsize of a vessel is the rolling motion. In the present study, particular attention is paid to the performance of a ship in beam sea. The linear ship response in waves is evaluated using strip theory. Critical condition in the rolling motion of a ship is when it is subjected to synchronous beam waves. In this paper, a nonlinear approach has been tried to predict the roll response of a vessel. Various representations of damping and restoring terms found in the literature are investigated. A parametric investigation is undertaken to identify the effect of a number of key parameters like wave amplitude, wave frequency, metacentric height, etc. 相似文献
3.
In this paper, a wave generating approach for long-crest irregular waves in a numerical tank by our in-house solver naoe-FOAM-SJTU is presented. The naoe-FOAM-SJTU solver is developed using an open source tool kit, OpenFOAM. Reynolds-averaged Navier?Stokes (RANS) equations are chosen as governing equations and the volume of fluid (VOF) is employed to capture the two phases interface. Incoming wave group is generated by imposing the boundary conditions of the tank inlet. A spectrum based correction procedure is developed to make the measured spectrum approaching to the target spectrum. This procedure can automatically adjust the wave generation signal based on the measured wave elevation by wave height probe in numerical wave tank. After 3 to 4 iterations, the measured spectrum agrees well with the target one. In order to validate this method, several wave spectra are chosen and validated in the numerical wave tank, with comparison between the final measured and target spectra. In order to investigate a practical situation, a modified Wigley hull is placed in the wave tank with incoming irregular waves. The wave-induced heave and pitch motions are treated by Fourier analysis to obtain motion responses, showing good agreements with the measurements. 相似文献
4.
The present paper describes a mathematical model in which the fluid motion inside a U-tank is nonlinearly coupled to the heave, roll and pitch motions of the ship. The main purpose of the investigation is centred on the control of roll motion in the case of parametric resonance in longitudinal waves. A transom stern small vessel, known to be quite prone to parametric amplification, is employed in the study. Four tank designs are employed in order to study the influence of tank mass, tank natural frequency and tank internal damping on the control of parametric rolling at different head seas conditions. Additionally, the influence of the vertical position of the tank is also investigated. The main results are presented in the form of limits of stability, with encounter frequency and wave amplitudes as parameters. Distinct dynamical characteristics are discussed and conclusions are drawn on the relevant parameters for the efficient control of the roll amplifications in head seas. 相似文献
5.
In this paper and its companion (Higuera et al., 2014--this issue), the latest advancements regarding Volume-averaged Reynolds-averaged Navier–Stokes (VARANS) are developed in OpenFOAM® and applied. A new solver, called IHFOAM, is programmed to overcome the limitations and errors in the original OpenFOAM® code, having a rigorous implementation of the equations. Turbulence modelling is also addressed for k-ϵ and k-ω SST models within the porous media. The numerical model is validated for a wide range of cases including a dam break and wave interaction with porous structures both in two and three dimensions. In the second part of this paper the model is applied to simulate wave interaction with a real structure, using an innovative hybrid (2D–3D) methodology. 相似文献
6.
As known, the rolling motion characteristics, amplitudes and accelerations, greatly influence the ability of a ship to operate and survive in bad weather. On the other hand, traditional computer codes for seakeeping calculations fail the forecasting of large amplitude rolling. There is a great need of using semi-empirical damping models and coefficients. This stresses the importance of campaigns of measurements as described in the paper, to get a deeper insight into the physical-mathematical modelling of the different contributions to rolling equation.Experimental tests on nonlinear rolling in a regular beam sea of a Ro-Ro ship model have been conducted by varying both the wave steepness and the wave frequency. The use of a parameter estimation technique, based on the least squares fitting of the stationary numerical solution of the nonlinear rolling motion differential equation, allowed to obtain informations on the damping model and on the linear and nonlinear damping coefficients. These exhibit a quite strong dependence on frequency that reduces the efficiency of constant coefficients rolling equation to simulate large amplitude nonlinear rolling. The results indicate that a good quality prediction model of nonlinear rolling cannot be based on constant coefficients time domain simulations. These can infact lead to incorrect estimates of rolling amplitudes even when the parameters have been obtained through high level parameter estimation procedures based on experimental data. The analysis indicates also a marked dependence of the effective wave slope coefficient on wave amplitude. The introduction of both these dependences on the rolling equation allows to reproduce the experimental results with great accuracy even at large amplitudes. 相似文献
7.
基于自研的HUST-Ship黏性流CFD求解器,提出了一种船舶耐波性数值试验水池参数化建模方法和网格生成技术。在自研的CFD软件平台中,根据波浪参数(规则波的波长、波高和不规则波的特征周期、有效波高)自动生成船舶耐波性数值试验水池。以结构化重叠网格技术为基础,分别对船舶与水池进行网格划分并进行网格的组装、重叠,实现船舶在耐波性数值试验水池中的数值“试验”,对船舶耐波性进行数值预报。根据波浪种类分为规则波数值试验水池与不规则波数值试验水池,可对各类波浪条件实现精确可靠的数值造波,模拟船舶在各种波浪环境中运动响应、耐波性事件与非线性运动特性。采用参数化建模方法生成的耐波性数值试验水池能够提高建模和网格生成效率,通过对国际标模进行数值预报并与船模试验结果对比,验证了参数化建模方法生成的耐波性数值试验水池对船舶在波浪中运动性能的计算精度。 相似文献
8.
针对不规则波浪作用下Wigley型船的运动响应问题进行了系统的研究,采用统计学方法深入探讨了船舶不规则运动幅值和响应周期的分布规律,并通过傅里叶变换对船舶运动响应进行了频谱特征分析。结果表明,船舶横摇方向与升沉和纵摇方向随机运动的响应特征有显著差异。在升沉与纵摇方向,波浪谱峰频率远离自振频率,前十分之一大振幅运动对应周期离散性较小,基本稳定在波浪谱峰周期附近,但小振幅运动周期分布离散性较大,频谱分析指出船舶升沉与纵摇运动响应频谱在波浪谱峰频率附近出现明显峰值。而在横摇方向,波浪谱峰频率与自振频率相耦合,不同振幅的横摇运动响应周期均稳定在自振周期附近,且周期离散性较小,频谱分析也表明横摇运动响应频谱主要集中于船舶运动自振频率附近。 相似文献
9.
A harmonic wave group single run seakeeping procedure is developed, validated and compared with regular wave and transient wave group procedures, using an unsteady Reynolds averaged Navier–Stokes solver, although all procedures can be also implemented using experiments or potential flow. Incoming waves are generated by linear superposition of potential solution for a number of component waves. The regular wave procedure requires multiple runs, whereas single run procedures obtain the response amplitude operators (RAO) for a range of frequencies at a fixed speed, assuming linear ship response. The transient wave group procedure provides continuous RAO curves, while the harmonic wave group procedure obtains discrete transfer functions without focusing. Results are presented for heave and pitch response amplitudes and phases for the DTMB model 5512 in head waves. Verification and validation studies are performed for the transient wave group procedure. Validation is achieved at the average interval of 9.54 (%D). Comparisons of the procedures show that the harmonic wave group procedure is the most efficient, saving 75.8% on the computational cost compared with the regular wave procedure. Error values from all procedures are similar at 4 (%D). Harmonic wave group results are validated for a wide range of the Froude numbers, with satisfactory results. 相似文献
10.
The failure of marine structures is often attributed to liquefaction in loose sand deposits that are subjected to ocean waves. In this study, a two-dimensional integrated numerical model is developed to characterize the liquefaction behaviours of loosely deposited seabed foundations under various types of ocean waves. In the present model, Reynolds-Averaged Navier–Stokes (RANS) equations are used to simulate the surface wave motion, and Biot's consolidation equations are used to link the solid-pore fluid interactions in a porous medium. A poro-elasto-plastic solution is used to reproduce foundation behaviour under cyclic shearing. Unlike previous investigations, both oscillatory and residual soil responses were considered; they are coupled in an instantaneous approach. Verification of the model results to the previous centrifugal wave tests is carried out, obtaining fairly good agreement. Numerical examples show that foundation behaviour under various types of wave loading, particularly standing waves or a solitary wave, embodies a completely two-dimensional process in terms of residual pore pressure development. The parametric studies demonstrate that liquefaction caused by the build-up of pore pressures is more likely to occur in loosely deposited sand foundations with poor drainage and under large waves. 相似文献
11.
A coupled numerical model considering nonlinear sloshing flows and the linear ship motions has been developed based on a boundary element method. Hydrodynamic performances of a tank containing internal fluid under regular wave excitations in sway are investigated by the present time-domain simulation model and comparative model tests. The numerical model features well the hydrodynamic performance of a tank and its internal sloshing flows obtained from the experiments. In particular, the numerical simulations of the strong nonlinear sloshing flows at the natural frequency have been validated. The influence of the excitation wave height and wave frequency on ship motions and internal sloshing has been investigated. The magnitude of the internal sloshing increases nonlinearly as the wave excitation increases. It is observed that the asymmetry of the internal sloshing relative to still water surface becomes more pronounced at higher wave excitation. The internal sloshing-induced wave elevation is found to be amplitude-modulated. The frequency of the amplitude modulation envelope is determined by the difference between the incident wave frequency and the natural frequency of the internal sloshing. Furthermore, the coupling mechanism between ship motions and internal sloshing is discussed. 相似文献
12.
《Coastal Engineering》2006,53(10):845-855
This paper presents a study of wave damping over porous seabeds by using a two-dimensional numerical model. In this model, the flow outside of porous media is described by the Reynolds Averaged Navier–Stokes equations. The spatially averaged Navier–Stokes equations, in which the presence of porous media is considered by including additional inertia and nonlinear friction forces, is derived and implemented for the porous flow. Unlike the earlier models, the present model explicitly represents the flow resistance dependency on Reynolds number in order to cover wider ranges of porous flows. The numerical model is validated against available theories and experimental data. The comparison between the numerical results and the theoretical results indicates that the omission or linearization of the nonlinear resistance terms in porous flow models, which is the common practice in most of analytical models, can lead to significant errors in estimating wave damping rate. The present numerical model is used to simulate nonlinear wave interaction with porous seabeds and it is found that the numerical results compare well with the experimental data for different wave nonlinearity. The additional numerical tests are also conducted to study the effects of wavelength, seabed thickness and Reynolds number on wave damping. 相似文献
13.
The PDFs (probability density functions) and probability of a ship rolling under the random parametric and forced excitations were studied by a semi-analytical method. The rolling motion equation of the ship in random oblique waves was established. The righting arm obtained by the numerical simulation was approximately fitted by an analytical function. The irregular waves were decomposed into two Gauss stationary random processes, and the CARMA (2, 1) model was used to fit the spectral density function of parametric and forced excitations. The stochastic energy envelope averaging method was used to solve the PDFs and the probability. The validity of the semi-analytical method was verified by the Monte Carlo method. The C11 ship was taken as an example, and the influences of the system parameters on the PDFs and probability were analyzed. The results show that the probability of ship rolling is affected by the characteristic wave height, wave length, and the heading angle. In order to provide proper advice for the ship''s manoeuvring, the parametric excitations should be considered appropriately when the ship navigates in the oblique seas. 相似文献
14.
A smoothed particle hydrodynamic (SPH) model is developed to simulate wave interaction with porous structures. The mean flow outside the porous structures is obtained by solving Reynolds Averaged Navier–Stokes (RANS) equations and the turbulence field is calculated by a large eddy simulation (LES) model. The porous flow is described by the spatially averaged Navier–Stokes type equations with the resistance effect of the porous media being represented by an empirical frictional source term. The interface boundaries between the porous flow and the outside flow are modeled by means of specifying a transition zone along the interface. The model is validated against other available numerical results and experimental data for wave damping over porous seabed with different levels of permeability. The validated model is then employed to investigate wave breaking over a submerged porous breakwater and good agreements between the SPH model results and the experimental data are obtained in terms of free surface displacement. In addition the predicted velocity, vorticity and pressure fields near the porous breakwater and in the breaking wave zone are also analyzed. 相似文献
15.
A finite element method for dynamic analysis of long slender marine structures under combined parametric and forcing excitations 总被引：2，自引：0，他引：2
This paper presents a numerical analysis of lateral responses of a long slender marine structure under combined parametric and forcing excitations. In the development of the 3-D numerical program, a finite element method is implemented in the time domain using the Newmark constant acceleration method. Some example studies are performed for various water depths, environmental conditions and vessel motions. The relative amplitudes of combined excitations to a conventional forcing excitation are examined. The response amplitude of a combined excitation is much greater than that of a forcing excitation in the even number of instability regions of the Mathieu stability chart. The results demonstrate that a combined excitation needs to be considered for the accurate dynamic analysis of long slender marine structures subjected to a surface vessel motion. 相似文献
16.
In this paper the rolling motion of a ship is examined with particular regard to the possibility of obtaining oscillations which are subharmonic to the excitation frequency. Three different mechanisms are found to be responsible for this phenomenon, the importance of which has already been recognized in the context of ship stability. The first is related to a strong symmetric or non-symmetric nonlinearity in the righting arm. The second is linked to the harmonic composition of sea waves and the third to the well known parametric excitation caused by coupling between different ship motions in a following sea.The onset of subharmonics is related to a threshold value for the excitation strongly depending on damping. The more appropriate analytical methods for a theoretical study of each mechanism are suggested. 相似文献
17.
In this paper, a numerical model is established for estimating the wave forces on a submerged horizontal circular cylinder. For predicting the wave motion, a set of two-dimensional Navier-Stokes equations is solved numerically with a finite element method. In order to track the moving non-linear wave surface boundary, the Navier-Stokes equations are discretized in a moving mesh system. After each computational time step, the mesh is modified according to the changed wave surface boundary. In order to stabilize the numerical procedure, a three-step finite element method is applied in the time integration. The water sloshing in a tank and wave propagation over a submerged bar are simulated for the first time to validate the present model. The computational results agree well with the analytical solution and the experimental data.Finally, the model is applied to the simulation of interaction between waves and a submerged horizontal circular cylinder.The effects of the KC number and the cylinder depth on the wave forces are studied. 相似文献
18.
19.
Considering the actual seaway condition, stability and capsizing of nonlinear ship rolling system in stochastic beam seas is of significant importance for voyage safety. Safe zone are defined in the phase space plan of the unperturbed Hamilton system to qualitatively distinguish ship motions as capsize and noncapsize. Capsize events are defined by solutions passing out of the safe zone. The probability of such an occurrence is studied by virtue of the random Melnikov function and the concept of phase space flux. In this paper, besides conventional wave excitation, the effect of wind load is also taken into account. The introduction of wind load will lead to asymmetry, in other words, it transforms the symmetric heteroclinic orbits into asymmetric homoclinic orbits. For asymmetric dynamical system, the orbital analytic solutions and its power spectrum are not readily available, and the technique of discrete time Fourier transformation (DTFT) is used. In the end, as verification of theoretical critical significant wave height, capsizing probability contour diagram is generated by means of numerical simulation. The contour diagram shows that these analytical methods provide reliable and predictive results about the likelihood of a vessel capsizing in a given seaway condition. 相似文献
20.
The seakeeping characteristics of a Small Waterplane Area Twin Hull (SWATH) vehicle equipped with fixed stabilizing fins was investigated by experimental and numerical methods The calculation methods range from viscous CFD simulation based on an unsteady RANS approach to Boundary Element Method (BEM) based on Three Dimensional Translating-pulsating Source Green Function (3DTP). Responses of ship motions in head regular waves and nonlinear effects on motion responses with increasing wave amplitude were analyzed. Numerical simulations have been validated by comparisons with experimental tests. The results indicate that the heave and pitch transfer functions depict two peaks with the increase of wave length. Comparisons amongst experimental data and different numerical calculations illustrate that the RANS method predicts ship motions with higher accuracy and allows the detection of nonlinear effects. The heave and pitch transfer functions see a downward trend with the increasing wave amplitude in the resonant zone at low speed. 相似文献