首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到19条相似文献,搜索用时 140 毫秒
1.
平台运动激励下钢悬链式立管触地点动态分析   总被引:1,自引:1,他引:0  
平台运动和管土相互作用是引起钢悬链式立管(Steel Catenary Riser,SCR)触地点动态响应和疲劳损伤的关键因素。基于竖向土抗力-埋深曲线和侧向库伦摩擦双线模型模拟SCR触地区管土作用,并考虑竖向海床刚度的退化,研究平台三维运动激励下SCR触地区的动态响应与疲劳寿命,相对于简单的单向运动激励和仅考虑竖向管土作用,更符合工程实际。计算结果表明:①三维管土作用下,平台垂荡运动对立管触地区的影响最大,纵荡运动次之,横荡的影响最小;②平台三维运动的耦合,在一定程度上可降低立管触地区的动力响应和疲劳损伤,若仅考虑垂荡运动,结果偏于保守;③非线性海床模型相对于线弹性海床,引起的立管触地区的应力幅值、位移幅值显著增加,虽然贯入位移较小,但土抗力较大,选用线弹性海床的计算误差较大。平台运动和海床强度对SCR触地点动态响应和疲劳损伤的影响较大,因此在SCR响应分析与设计中,准确选择海床模型和平台运动方式,对于预测立管的疲劳寿命具有重要意义。  相似文献   

2.
由于钢悬链线立管具有非线性特性,而海床土体又是软黏土,因此钢悬链线立管触地区域的管土的相互作用十分复杂。根据国外相关试验数据,采用ANSYS中的非线性弹簧单元模拟海床土体,考虑海床土体刚度退化和土吸力对管道的作用,建立海底管道拟静力有限元计算模型,计算分析管道与海床土体的相互作用,并探讨管道触地点区域关键点在顶端升沉运动下弯矩的变化规律,为进一步研究SCR与海床的动力相互作用提供参考。  相似文献   

3.
海上大直径钢管桩打桩过程中,桩周土体受到强烈扰动而发生强度弱化,掌握桩周土体强度弱化规律对于准确预测打桩过程、保证工程安全具有重要意义。为研究土体强度弱化规律,开展了环剪试验模拟打桩对桩周土体的扰动,测试土体强度随剪切速率的变化规律,建立了描述土体强度弱化规律的拟合公式,引入到打桩分析软件中。研究结果表明:土体的强度折减程度不仅与土体本身的性质有关还受到土体的埋深和剪切速率的影响,埋深越深土体强度折减程度越低,剪切速率越高土体强度折减越高,在打桩分析中可采用这里推荐的线性折减方法来模拟不同深度处土体强度的折减规律。  相似文献   

4.
采用三维非线性动态有限元方法对抛锚撞击海底管道进行模拟。建立霍尔锚模型,考虑管土相互作用,研究不同撞击能量下抛锚撞击管道的机械损伤(最大凹陷)变化规律。对不同防护措施的防护效果进行探讨,包括埋深、混凝土配重层、加大径厚比等措施。数值模拟结果与试验结果进行对比,两者结果吻合较好。结果表明:当锚与管道接触面积越小时,锚对管道的撞击凹陷越大;加大埋深对抛锚撞击管道有很好防护的作用;管道内压对抛锚撞击管道有一定的抵抗作用;混凝土配重层对防护抛锚撞击管道的防护作用不明显;增加管道壁厚是防护抛锚撞击管道的有效措施之一,也应考虑经济性。本文研究结果为实际工程中降低抛锚撞击管道机械损伤后果提供参考。  相似文献   

5.
浮体运动和海床土刚度是引起钢悬链式立管(steel catenary riser,简称SCR)管土相互作用的关键因素,将导致SCR触地区的疲劳损伤。以工作水深为1500 m的浮式平台上生产立管SCR为研究对象,基于法向抗力模型和侧向阻力模型建立管土作用模型,在环境载荷和浮体运动作用下,开展SCR与浮式平台的整体分析,研究海床土参数对SCR触地区动态响应和疲劳寿命的敏感性。通过改变海床土的不排水抗剪强度Su0、强度梯度ρ、吸力因子fsuc、吸力衰减参数λsuc以及再贯入系数λrep等,得到不同参数对触地区动力响应、疲劳寿命的影响规律。研究结果表明:①基于软黏土海床,随着不排水抗剪强度Su0的增加,触地区立管疲劳寿命减幅达到33.23%,敏感性最高;②吸力因子fsuc越大,立管疲劳寿命越小且减幅达23.77%,其敏感性较高;③随着再贯入系数λrep增大,触地区立管疲劳寿命增幅达到15.48%;④海床抗剪强度梯度ρ和吸力衰减参数λsuc对立管疲劳寿命影响较小。研究结论能为SCR设计分析及安全服役提供重要参考。  相似文献   

6.
王慧  张可成  王忠涛  张宇  王洪波 《海洋学报》2020,42(11):123-130
航船应急抛锚时锚板贯入土体可能会影响河床或海床中的结构物甚者造成破坏,因此在通航频繁的航道,结构物埋深的设计需要充分考虑应急抛锚时锚板的贯入深度。本文通过缩尺模型试验模拟了霍尔锚在中等密实度粉细砂中的抛锚贯入过程,研究了不同抛锚速度(1.15~4.4 m/s)及粉细砂相对密实度(0.45~0.65)对抛锚贯入深度的影响;基于太沙基极限承载力理论和能量守恒定律,推导出霍尔锚在粉细砂土中贯入深度的表达式,与模型试验结果对比显示理论计算结果偏于保守。基于试验结果提出修正系数,修正后的理论公式能够较好地快速预测霍尔锚在中等密实度粉细砂中的贯入深度。研究结果为粉细砂土河床或海床中的结构物埋深设计提供了一定的技术参考。  相似文献   

7.
海底埋设双层管管道隆起屈曲分析是海洋管道设计的重要技术之一。在管道隆起屈曲分析中实现管土作用和内外管相互作用的准确模拟一直是工程应用追求的目标,也是其中的难点。利用管土作用单元和管中管单元等技术,建立了海底埋设双层管管道隆起屈曲分析有限元模型。该模型不但考虑了管道初始形状、压力、温差载荷、管道材料非线性等常规因素,还考虑了非线性管土作用和内外管相互接触作用,并能对管道屈曲前和屈曲后全程进行模拟。应用该模型,计算了一条高温高压埋设双层管管道隆起屈曲过程中的应力等。算例表明该模型有较好收敛性,能对一般海底高温高压埋设双层管管道隆起屈曲进行准确模拟。  相似文献   

8.
海底管道一旦受到坠物撞击损伤,会造成严重的环境污染及经济损失,为保证管道在运行期间的安全性,常对其进行埋深处理。对于有埋深的海底管道,坠物的撞击会造成管道上覆土体的大变形,在数值模拟中会导致网格畸变,甚至无法收敛。耦合欧拉-拉格朗日法(CEL法)可有效处理土体大变形问题,本文基于此方法建立了坠物-管道-土体有限元模型,分析了坠物撞击速度、质量、形状、海床土体性质(弹性模量、内摩擦角、黏聚力)、埋深对海底管道塑性变形的影响。结果表明,管道的凹痕深度随坠物撞击速度和质量的增加而增加;坠物与海床土体及管道接触面积越小,管道的凹痕深度越大;管道的埋置深度及海床土体的性质对吸收坠物的撞击能量有直接关系:海床土体的强度越高、埋深越大,管道所受到的损伤程度越小。分析结果可为管道的设计与防护工作提供科学依据,且与现行规范比较,本文方法更加经济、合理。  相似文献   

9.
海底管线是海洋油气输运系统的重要组成成分,其稳定性和安全性尤为重要。通过有限元软件ABAQUS,应用Mohr-Coulomb模型,模拟海底裸置与埋置管线自沉过程。通过平衡初始地应力,设置管土接触,考虑重力和浮力作用,进行土体固结分析,计算裸置与埋置管线的土体与管线竖直位移,并进行管线悬跨研究。计算结果显示,对于裸置管线,参数的改变使土体更容易发生塑性屈服,土体的竖直位移量更大;对于埋置管线,当管线埋深较浅、管线上方土体重量不大时,参数的改变使管线平均密度与周围土体密度相差越大土体越容易发生塑性屈服,土体的竖直位移量越大。当管线悬空时,悬跨长度过大易使管线两端支撑土体被压溃,管线易产生大变形而失稳,因此在管线安装与维护过程中,一定要采取措施降低悬跨长度,保证管线运营安全。  相似文献   

10.
为研究坠物对海底悬空管道的撞击损伤规律,基于非线性有限元分析软件ANSYS/LS-DYNA建立考虑管土相互作用的坠物撞击悬空管道数值模型。经过数值模拟,探究了撞击能量、土体性质和悬空长度等对海底管道受坠物撞击后凹陷损伤的影响。研究表明,撞击能量是影响海底悬空管道损伤程度的主要因素,在同样的撞击能量下,海底悬空管道的悬空段长度对管道的凹陷损伤影响不大,但管道弹性变形以及海床的土体变形会有差异,虽然海床土体变形会吸收大量的撞击能量,但改变土体性质同样对管道损伤结果影响不大。研究结果可以为海底管道的工程设计提供一定的参考。  相似文献   

11.
The cyclic movement of a riser at the touchdown zone (TDZ), which involves complicated pipe–soil interaction, is critical to its long-term safety. Most previous studies have focused on the pipe–soil interaction of the riser in the vertical plane at the TDZ. Therefore, we conducted laboratory tests to investigate the pipe–soil interaction during lateral cyclic pipe movements and the influence of seabed evolution around the TDZ on the following vertical cyclic pipe movements. At the TDZ, the bell mouth shape of the clay bed and ladle-like shape of the pipe were observed during lateral cycling. The movement trajectory of the pipe as well as the gradual penetration process was recorded, which may be mainly attributed to the lateral ploughing and soil softening around the pipe. The test dynamic embedment factor (ratio of the dynamic embedment and static embedment) was 1.7–2.7. The enlargement of the TDZ during cycling was measured, which was mainly related to the movement of the trench surface point. The increase in the undrained strength of the soil at the TDZ after dynamic tests proves that a crust of soil was formed beneath the pipe owing to consolidation during cyclic pipe–soil interaction.  相似文献   

12.
Steel catenary risers (SCR) connect seabed pipelines and flow lines to floating structures used for oil and gas production in deep waters. Waves and currents induce motions of the structure and the risers. The repeated motions of the risers at the touchdown zone in turn induce loads on the seabed soil and might eventually cause fatigue damage to the risers. The analysis of riser fatigue damage is heavily dependent on the soil model. Soil behaviour at touchdown zone such as soil remoulding, stiffness degradation and deformation of the seabed at the touchdown zone further complicate the accurate assessment of riser fatigue damage, which is currently not appropriately quantified in existing design methods. This paper presents centrifuge model tests simulating the repeated vertical movement of a length of riser on clay seabed with increasing undrained shear strength with depth. During the tests, the pipe was subject to cyclic motion over fixed vertical displacement amplitude from an invert embedment of 0.5-3.5 pipe diameters into the soil. The test results show a significant progressive degradation of soil strength and diminution of excess pore water pressure with increasing number of riser penetration/uplift cycle. In view of the different types of environment loadings experienced by floating platforms and various soil conditions, tests were also conducted to investigate the effect of soil strength, riser displacement rate and loading mode on riser-soil interaction during repetitive penetration/uplift motion of the riser.  相似文献   

13.
Steel catenary risers (SCRs) are usually cost-effective solutions in the development of offshore fields and the transferring of the hydrocarbons from the seabed to the floating facilities. These elements are subjected to the fatigue loads particularly in the touchdown zone (TDZ), where the oscillating SCR is exposed to cyclic contact with the seabed. The slug-induced oscillation is a significant contributor to the fatigue loads in the TDZ. The cyclic seabed soil softening under the wave-induced riser oscillations and the gradual penetration of the SCR into the seabed are widely accepted to have a significant influence on SCR fatigue performance. However, this has never been investigated for slug-induced oscillations due to the lack of integrated access to comprehensive numerical models enabling the simulation of the riser slugging and nonlinear hysteretic riser-seabed interaction at the same time. In this paper, an advanced interface was developed and verified using the multi-point moving tie constraint in order to examine the influence of cyclic seabed soil softening on slug-induced oscillations of SCR. The interface was integrated with a pre-developed user subroutine for modeling of the nonlinear hysteretic riser-seabed interaction and incorporated into a global SCR model in ABAQUS. A comprehensive parametric study was conducted to investigate the influence of slug characteristics and nonlinear seabed soil model on slug-induced, wave-induced, and combined wave/slug induced oscillations of SCR in the TDZ. It was observed that the nonlinear seabed model could significantly affect the embedment of the SCR into the seabed under the slug-induced oscillations and consequently improve the fatigue life. The developed user interface was found to be a strong framework for modeling riser slugging.  相似文献   

14.
围绕钢悬链线立管(SCR)与海床的相互作用,在水箱内开展三维试验研究,研究在不同模拟运动激励下SCR触地点的应力状态。针对当前模拟试验中,全尺寸试验耗资巨大,且试验环境难以控制,缩尺试验大多模拟立管二维运动等现状,提出一套简单易行的三维管土作用试验装置,通过横向、纵向、垂向三个方向轨道位置的合理布置,使得立管可在单向、二维耦合和三个方向同时运动,对模型立管的顶端、底端的边界条件进行处理,通过驱动器在顶端施加位移,模拟在周期运动作用下,立管触地区与土的相互作用,在三维空间内研究立管的力学特性。由此指导立管的整体设计与分析,对保证SCR在深水油气开采中的安全可靠性,具有非常重要的意义。  相似文献   

15.
The pipe-soil interactions at shoulders can significantly affect the vortex-induced vibrations (VIV) of free-spanning pipes in the subsea. In this paper, the seabed soil reacting force on the pipe is directly calculated with a nonlinear hysteretic soil model. For the VIV in the middle span, a classic van der Pol wake oscillator is adopted. Based on the Euler-Bernoulli beam theory, the vibration equations of the pipe are obtained which are different in the middle span and at the two end shoulders. The static configuration of the pipe is firstly calculated and then the VIV is simulated.The present model is validated with the comparisons of VIV experiment, pipe-soil interaction experiment and the simulation results of VIV of free-spanning pipes in which the seabed soil is modelled with spring-dashpots. With the present model, the influence of seabed soil on the VIV of a free-spanning pipe is analyzed. The parametric studies show that when the seabed soil has a larger suction area, the pipe vibrates with smaller bending stresses and is safer.While with the increase of the shear strength of the seabed soil, the bending stresses increase and the pipe faces more danger.  相似文献   

16.
钢制悬链线式立管的触地段与海床会发生频繁的相互作用,对管道的安全性影响很大。首先探索干土环境下管土作用的机理有助于更好地理解真实海况下管道—湿土作用规律。试验测试是研究管土作用最可信最直接的手段。进行了垂向及侧向管土作用机理性试验,根据土体抗剪强度验证了试验中相互作用机理与管道尺寸的无关性。研究了不同运动速度对土体反力的影响,发现运动速度对垂向及侧向管土作用均存在一定的放大效应,而垂向低速工况下放大效应不明显;接着分别研究了垂向与侧向管土作用的规律,分析了土体反力变化的成因,最后针对管土垂向—侧向的耦合效应进行研究,发现不同的垂向深度会极大地影响侧向管土作用。为后续的管道—含水土体相互作用试验奠定基础,也可为陆上管土作用相关研究提供参考与建议。  相似文献   

17.
Accurate assessment of pipe-soil interaction under cyclic wave actions is of pronounced importance for the stability analysis of submarine pipelines in sandy seabed. This paper presents a plane-strain numerical study on such a problem using a finite element program DBLEAVES, which incorporates an elasto-plastic soil model that is capable of capturing the cyclic mobility behavior of sandy soils under cyclic loadings. A detailed validation against analytical solution and model test results was provided to demonstrate the robustness of the present numerical model to mimic both pre- and post-liquefaction behavior of sands, before an extensive parametric study was introduced. It was found that the accumulation of excess pore pressure in the vicinity and far field of a pipeline was strongly affected by the existence of it, with an influential range of about two pipe diameters. The influences of wave and seabed properties (e.g. relative densities) on the uplift response of pipelines were then investigated, based on which an explicit model was developed to quantify the degradation effect of waves on the uplift bearing capacity of pipelines against thermally-induced buckling.  相似文献   

18.
浮体运动是引起钢悬链式立管(steel catenary riser,简称SCR)动态响应和疲劳损伤的关键因素,目前研究SCR问题时,为简化计算往往仅考虑平台一阶运动,忽略二阶运动影响。而实际上不同浮体结构的二阶运动响应特征明显,拟以SCR服役张力腿平台(tension leg platform,简称TLP)为例,探讨浮体二阶运动对SCR触地区动态响应的影响。建立考虑海床刚度退化的管土作用模型以改进现有的CABLE3D RSI程序,通过编写程序接口,将有限元分析得到的平台实际运动响应导入,研究平台不同运动作用下SCR触地区的位移、动力响应及疲劳分布情况。根据波流作用方向将TLP二阶慢漂运动分为近端和远端漂移两种工况,发现二阶运动下立管与海床的作用范围会增大,且触地区不仅发生高频小幅振荡运动,同时伴随低频大幅运动响应;平台远端漂移时,管内张力敏感程度高,而近端漂移时触地区的弯矩显著增大,都会不同程度提高触地区的疲劳损伤率。研究可为服役不同浮体的SCR响应预测与疲劳分析提供参考和借鉴。  相似文献   

19.
Fatigue response of steel catenary risers (SCR) in the touchdown zone (TDZ) is significantly affected by riser-seabed interaction. Non-linear hysteretic riser-seabed interaction models have been recently developed to simulate the SCR cyclic embedment into the seabed. Despite the advancements achieved in the prediction of non-linear hysteretic riser-seabed interaction, several inconsistencies have been recently identified in the nodal performance of some of the popular models. These limitations need to be resolved by proposing new models or improving the existing models. However, it is necessary to evaluate the influence of the identified shortcomings of the existing models on the global performance of the riser. In this paper, the influence of nodal inconsistencies observed in a popular riser-seabed interaction model on the global performance of the riser was comprehensively examined in the TDZ. The riser embedment profile, cyclic contact stress, contact stress envelop, mean shear force, cyclic bending moment, and consequently the cumulative fatigue damage was investigated. The study showed that the soil model overestimates the riser embedment and other global responses. Recommendations were made to overcome the identified shortcomings of the existing models in future developments.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号