共查询到18条相似文献，搜索用时 109 毫秒
1.
浮式防波堤充分利用波能在水深方向的分布特性,在满足工程消浪要求的同时对海域水沙交换影响较小,且能够快速布置,在某些实际工程有一定应用前景。为了深入了解波浪作用下浮式防波堤的动力响应,基于OpenFOAM标准求解器olaFlow,在刚体运动求解计算中植入锚链求解模块MOODY(mooring cable dynamics),实现了基于重叠网格方法的浮体运动与锚链受力耦合求解,建立了锚链系泊浮式防波堤动力响应的二维数值模型。利用该数值模型对锚链系泊单方箱浮式防波堤在波浪作用下的透射系数、运动响应、锚链张力进行了模拟,并和相关试验结果进行了比较。结果表明,模型能够准确模拟二维波浪和浮式防波堤的相互作用,并用于三维模型的改进。 相似文献
2.
浮式防波堤在港口海岸工程、近海工程、海洋工程和水产养殖等诸多领域有广阔的应用前景。与单浮箱式浮式防波堤相比,多浮箱式浮式防波堤可提高其消浪性能。对双浮箱式浮式防波堤进行了二维波浪物理模型试验,分析了浮箱宽度、前后浮箱连接方式、前后浮箱间距以及浮箱入水深度等因素对浮式防波堤消浪性能的影响。研究结果表明:对于单浮箱式浮式防波堤,试验范围内浮箱宽度增大一倍后消浪效果改善并不相对明显;前后浮箱刚性连接的双浮箱式浮堤的波浪透射系数均小于前后浮箱自由的双浮箱式浮堤和相同浮箱宽度的单浮箱式浮堤,浮堤消浪性能提高;由于前后浮箱相对间距太大时前后浮箱的相互作用减弱,浮堤的波浪反射系数变小,而不同前后浮箱相对间距的波能损耗系数整体上差别较小,双浮箱式浮堤的波浪透射系数整体上随着前后浮箱相对间距D/2B的增大先减小然后变大,在相对间距D/2B为1.0~1.5时双浮箱式浮堤的波浪透射系数相比最小;不同波高和波浪周期下,浮堤的波浪透射系数均随着浮箱相对入水深度的增大而减小。 相似文献
3.
波浪作用下方箱-水平板浮式防波堤时域水动力分析 总被引：1，自引：0，他引：1
在线性化势流理论范围内求解方箱-水平板浮式防波堤的波浪绕射和辐射问题,从时域角度分析了浮式防波堤的水动力特性.采用格林函数法将速度势定解问题的控制微分方程变换成边界上的积分方程进行数值求解,浮式防波堤的运动方程采用四阶Runge-Kutta方法求解.对不同层数水平板的浮式防波堤的波浪透射系数、运动响应和锚链受力进行了计算分析,结果表明方箱相对宽度对方箱-水平板浮式防波堤的波浪透射作用有重要的影响,透射系数随着方箱相对宽度的增加而减小.对于方箱加二层水平板的浮式防波堤,在本研究的计算条件下,当方箱相对宽度从0.110增加至0.295时,透射系数从0.88减小至0.30.水平板有利于增加浮式防波堤对波浪的衰减作用,但随着水平板层数从0增加至2,这种波浪衰减作用增加的程度趋弱.方箱-水平板的浮式防波堤的运动量小于单一方箱防波堤的运动量.与此对应,方箱-水平板防波堤的锚链受力小于单一方箱防波堤的锚链受力. 相似文献
4.
浮式防波堤非线性波浪力实验研究 总被引：2，自引：1，他引：2
对浮式防波堤在不同吃水深度、周期、波高和入射波波型情况，进行了波浪对浮式防波堤非线性作用力的研究，给出了有关实验结果。实验结果表明波浪力在周期较大时，随着波高的增加，出现一阶力减小、高阶力增大的强非线性现象。实验中出现了二阶力大于一阶力的现象，也出现了三阶力大于二阶力和一阶力的现象。 相似文献
5.
依据波浪理论,分析了波浪经过网衣后的流体特性和边界条件,研究了网衣的波浪水动力、波浪透射系数与网衣尺度、特征参数、波浪参数等的关系。设计预加张力放射系泊法进行网衣构件水槽波浪试验。试验构件由10种PE网衣和HDPE框架装配而成,试验工况是规则波,周期为0·8—2·0s,波高为50—250mm。结果表明,作用在网衣上的水平波浪力变化规律与波浪基本一致,呈现周期性和不对称性变化;波浪力变化曲线呈现司托克斯二阶波形状,波峰较陡,波谷较平坦,和波面图相似;网衣水平波浪力周期峰值大约与波高的2·6次方、波长的0·8次方成比例,与网衣宽度l线性相关;随着特征参数d/a增大,网衣波浪力呈线性增加变化,透射系数减少,网衣消浪能力主要集中在网衣水表层。同时设计多层网衣组合的柔性浮式防波堤波浪试验,其消浪能力除了与网衣尺寸、特征参数等相关以外,还与网衣间隔距离有一定的关系。水槽试验时波浪最小透射系数下降到71%左右,从经济、实用角度表明,可用网衣来制作能防护渔业设施的柔性浮式防波堤。 相似文献
6.
针对设计的新型双浮筒+Savinious型(S型)桨叶浮式防波堤的结构形式,基于势波理论和结构耦合水动力分析理论,利用面元积分和Newmark-β时间步进格式进行计算,研究其在线性规则波作用下的消波性能、运动响应和系泊张力响应,验证该结构的合理性。数值计算结果表明,阻尼修正后的防波堤纵摇运动响应合理,在波高H=1.5 m、波浪周期T=3 s下其消浪性能较为理想,透射系数达到0.65,同时系泊线张力呈周期响应并满足最大破断力的条件。此外,还研究了浮筒相对间距S1/L,浮筒—桨叶相对间距S2/L以及Savinious型桨叶高径比d/h三个无量纲关键几何参数对防波堤透射系数Ct和系泊线时域张力响应的影响。计算结果表明,浮筒间距S1越接近波长,防波堤消波性能越好,但迎浪侧张力响应幅值越大;随着浮筒—桨叶相对间距S2/L由0趋近于1,其透射系数随之减小,但迎浪侧张力响应幅值基本保持不变;减小桨叶的高径比d/h可以提高防波堤消波性能的稳定性,但张力响应幅值随之增大。 相似文献
7.
在圆筒形防波堤和V形防波堤的基础上,结合离岸堤后形成V形和半圆形连续出现的韵律海岸的地貌平面形态特点,提出一种前墙为连续的半圆筒形防波堤形式。通过在波浪水槽内进行规则波物理模型试验,探究这一新型防波堤的波压力分布规律及波高、周期、水深等因素对波压力的影响。将试验结果与海港水文公式和合田良实公式计算的理论值对比分析,给出了以合田良实公式的折减系数来拟合新型弧形防波堤波浪总水平力的计算公式。结果表明:新型弧形防波堤上的波压力随波高、周期的增大而增大,其水平波浪总力比同等尺度直墙少10%左右。 相似文献
8.
直立式防波堤堤头在斜向波浪作用下波浪力的计算在现行的技术规范中尚属空白。通过物理模型试验给出了堤头结构设计所需的波压分布图，指出了波浪入射方向和地形对堤头所受波浪力的贡献有时可以超过波高和波周期，根据现行规范按波浪正向入射计算堤头所受的波浪力偏于安全。 相似文献
9.
在海岸带种植红树林等水生植物可以有效的减小波浪对岸滩的破坏,系统全面地研究植物对波浪传播变形的影响是非常必要的。基于波浪水槽实验,探讨了规则波通过非淹没刚性植物波高的沿程变化,分析了水深、入射波高、植物模型密度及分布方式对反射系数、透射系数与波浪衰减系数的影响,同时与孤立波实验数据进行对比。实验结果表明,随着水深的增加,规则波的透射系数增加、反射系数和波能衰减系数减小;随着入射波高的增加,规则波的透射系数减小,反射系数和波能衰减系数增加。在分布方式相同的情况下,植物模型分布密度增加,规则波的反射系数和波能衰减系数增加,透射系数减小。在规则波入射方向上模型布置越紧密,规则波反射系数和波能衰减系数越大,透射系数越小。分析讨论了植物模型对规则波和孤立波的影响,在入射波要素相同的情况下,孤立波和规则波的能量衰减在50%左右,说明植物模型具有良好的消波作用。 相似文献
10.
11.
In recent years floating breakwaters are considered for creating calm basin under open sea conditions for short period of time. In this paper, experimental studies on the performance characteristics of a horizontal floating plate breakwater are presented. The results of this two-dimensional model study are for regular waves of shallow and intermediate water depths. Analysis of the results shows that the transmission coefficient is strongly influenced by wave steepness and relative length of breakwater. It is also found to be dependent, to a lesser extent, on the relative depth of draft. Mooring forces are found to increase with increasing wave steepness and relative depth of draft. The performance of this breakwater is compared with other types of breakwater reported by earlier workers. 相似文献
12.
波浪与起伏水平板防波堤相互作用数值模拟 总被引：1，自引：1，他引：0
利用自主研发的基于紧致插值曲线CIP(constrained interpolation profile)方法的数学模型,开展规则波与起伏水平板防波堤相互作用的数值模拟研究。模型在笛卡尔直角坐标下建立,以CIP方法为流场基本求解器,分步求解Navier-Stokes方程,利用高精度的流体体积类型的THINC/SW (tangent of hyperbola for interface capturing with slope weighting)方法重构自由液面,采用浸入边界IBM(immersed boundary method)方法处理波浪与起伏板防波堤的耦合作用问题,通过动量源项造波方法模拟波浪的产生。重点关注波浪的浅水变形和板两端涡旋脱落的非线性现象,分析不同潜深、波要素下的板周围流场分布、板的运动响应和波浪的反透射系数。结果表明:起伏水平板主要通过能量反射、板上浅水变形和板两端的涡脱落消能,能有效减小板后波高,具有作为防波堤的可行性。 相似文献
13.
《中国海洋工程》2021,(4)
In the present study, the performance characteristics of a Savonius rotor type wave energy converter used in conjunction with a conventional double-buoy floating breakwater is investigated using physical model studies. The Savonius rotor type converter is suspended under the double-buoy floating breakwater to achieve wave attenuation while generating electricity, thereby enhancing the overall wave-elimination effect of the combination. The Savonius rotor is tested with different water submergence depths, and a reasonable relative submergence depth is determined within the scope of the research parameters. The hydrodynamics and energy capture performance of the combined breakwater with four different sizes of Savonius rotor under different wave conditions are studied, and the transmission coefficient of the experimental device is analyzed. The results show that when the optimal relative submergence depth is 0.65 D, where D is the impeller diameter, there is a correspondence between the optimal performance of Savonius rotor with different rotor sizes and the wave period and wave height. The optimal energy capture efficiency of the wave energy converter reaches 17%-20.5%, and the transmission coefficient is reduced by35%-45% compared with the conventional double-buoy breakwater. 相似文献
14.
弧板式透空堤消浪性能影响因素数值研究 总被引：1，自引：0，他引：1
弧板式透空堤是由弧型板组成的新型防波堤结构。为探讨其透射系数的影响因素,利用Fluent软件基于N-S方程构建了波浪与板式透空堤相互作用的数值模型,讨论了相对潜深、入射波周期、相对波高、相对板宽和结构型式对透射系数的影响。结果表明:弧板式透空堤的透射系数随着相对波高和入射波周期的增大而增大,在静水面附近透射系数最小,尤以静水面和略高于静水面时的消浪效果最佳;在相同波浪要素条件下,静水面及其上0.02 m和0.04 m位置处,弧板式透空堤的消浪效果明显优于平板式透空堤。 相似文献
15.
The ocean wave system in nature is very complicated and physical model studies on floating breakwaters are expensive and time consuming. Till now, there has not been available a simple mathematical model to predict the wave transmission through floating breakwaters by considering all the boundary conditions. This is due to complexity and vagueness associated with many of the governing variables and their effects on the performance of breakwater. In the present paper, Adaptive Neuro-Fuzzy Inference System (ANFIS), an implementation of a representative fuzzy inference system using a back-propagation neural network-like structure, with limited mathematical representation of the system, is developed. An ANFIS is trained on the data set obtained from experimental wave transmission of horizontally interlaced multilayer moored floating pipe breakwater using regular wave flume at Marine Structure Laboratory, National Institute of Technology Karnataka, Surathkal, India. Computer simulations conducted on this data shows the effectiveness of the approach in terms of statistical measures, such as correlation coefficient, root-mean-square error and scatter index. Influence of input parameters is assessed using the principal component analysis. Also results of ANFIS models are compared with that of artificial neural network models. 相似文献
16.
In this study, a mathematical model has been developed that can compute various hydrodynamic characteristics of a multiple-row curtainwall-pile breakwater. To examine the validity of the developed model, laboratory experiments have been conducted for double- and triple-row breakwaters with various combinations of drafts of curtain walls, porosities between piles, and distances between rows. Comparisons between measurement and prediction show that the mathematical model adequately reproduces most of the important features of the experimental results. As a whole, the transmission coefficient decreases with an increase in relative water depth, whereas the reflection coefficient, normalized run-up and force exhibit an opposite trend in their variations. With fixed values of the draft of the curtain wall and the porosity of lower perforated part of the first row of a double-row breakwater, as these values of the second row increase and decrease, respectively, the transmission coefficient decreases, as expected. On the other hand, their effects on wave reflection, run-up, and wave force change with the relative depth. As for the distance between the rows, the transmission coefficient becomes a maximum when it is about one half of the wave length, suggesting that this condition should be avoided to achieve the advantage of the breakwater in reducing wave transmission. It is shown that for prototype breakwaters, on an average, the transmission coefficient would be smaller than 0.3 for wave periods less than 6.0 s, and it would be about 0.45 even for the wave period of 9.0 s, although there would be a variation depending on the geometry of the breakwater. It is also shown that wave transmission is significantly reduced by multiple-row breakwaters compared with a single-row breakwater, while the difference between double-row and triple-row breakwaters is marginal. Finally, engineering monograms are provided for double-row breakwaters to be used in practical engineering applications of the breakwaters. 相似文献
17.
A comprehensive experimental study was carried out on the regular wave attenuation with a trapezoidal pontoontype floating breakwater(FB) in deep water. The functionalities of two simple FB geometries consist of a rectangle and a trapezoid with the slope of 60° were investigated under the wave attack. A two-dimensional wave flume was used in the experiment; the incident, transmitted waves, mooring line forces and motion responses of the floating breakwaters were measured. Also the influence of the sea state conditions(incident wave height and wave period)and structural parameters(draught of the structure) were investigated using the trapezoidal FB. Our experimental results indicated that the trapezoidal FB significantly reduced the wave transmission and mooring line force when compared with rectangular FBs. A new formula was developed in order to predict the value of the transmission coefficient in trapezoidal FBs with the slope of 60°. Experimental data showed to be consistent with the results of the formula. 相似文献
18.
Michael Stiassnie 《Applied Ocean Research》1980,2(3):107-111
A simple mathematical model, based on the solution of the two-dimensional problem of a vertical floating plate and on rigid body dynamics, is used to investigate the influence of different characteristics (such as mass, draft and anchoring) on the breakwater performance. The results include information about the transmission coefficient as well as about the plate displacement and anchoring forces, as functions of the plate and incident wave parameters. 相似文献