共查询到20条相似文献，搜索用时 46 毫秒
1.
Comparative Study of Different SPH Schemes on Simulating Violent Water Wave Impact Flows 总被引：1，自引：0，他引：1
Free surface flows are of significant interest in Computational Fluid Dynamics（CFD）. However, violent water wave impact simulation especially when free surface breaks or impacts on solid wall can be a big challenge for many CFD techniques. Smoothed Particle Hydrodynamics（SPH） has been reported as a robust and reliable method for simulating violent free surface flows. Weakly compressible SPH（WCSPH） uses an equation of state with a large sound speed, and the results of the WCSPH can induce a noisy pressure field and spurious oscillation of pressure in time history for wave impact problem simulation. As a remedy, the truly incompressible SPH（ISPH） technique was introduced, which uses a pressure Poisson equation to calculate the pressure. Although the pressure distribution in the whole field obtained by ISPH is smooth, the stability of the techniques is still an open discussion. In this paper, a new free surface identification scheme and solid boundary handling method are introduced to improve the accuracy of ISPH. This modified ISPH is used to study dam breaking flow and violent tank sloshing flows. On the comparative study of WCSPH and ISPH, the accuracy and efficiency are assessed and the results are compared with the experimental data. 相似文献
2.
由于在前壁上设置了尺寸较小的孔,开孔沉箱受流体黏性力作用显著,依照弗劳德数相似准则设计模型存在比尺效应。为揭示比尺效应,建立了模拟波浪与开孔沉箱相互作用的光滑粒子流体动力学(SPH)模型。其中流体运动由连续性方程和Navier-Stokes方程控制,固壁边界由改进的动力边界粒子施加。模型收敛性通过分析不同粒子分辨率下的波浪反射系数得到,模型精度通过比较计算与理论波浪反射系数证明。使用经过验证的SPH模型,计算并比较了不同几何比尺和开孔率下开孔沉箱附近的涡量场、箱体外侧的波面时程曲线和波浪反射系数。结果表明,随着模型几何比尺的减小,开孔沉箱受到偏大的流体黏性力,致使更多波能在湍流运动中耗散,进而减小了波浪反射系数并降低了箱体外侧的波面高度。 相似文献
3.
This paper presents a numerical model for simulating wave interaction with porous structures. Incompressible smoothed particle hydrodynamics in porous media (ISPHP) method is introduced in this study as a mesh free particle approach that is capable of efficiently tracking the large deformation of free surfaces in a Lagrangian coordinate system. The developed model solves two porous and pure fluid flows simultaneously by means of one equation that is equivalent to the unsteady 2D Navier–Stokes (NS) equations for the flows outside the porous media and the extended Forchheimer equation for the flows inside the porous media. Interface boundary between pure fluid and porous media is effectively modeled by the SPH integration technique. A two-step semi-implicit scheme is also used to solve the fluid pressure satisfying the fluid incompressibility criterion.The developed ISPHP model is then validated via different experimental and numerical data. Fluid flow pattern through porous dam with different porosities is studied and regular wave attenuation over porous seabed is investigated. As a practical case, wave running up and overtopping on a caisson breakwater protected by a porous armor layer are modeled. The results show good agreements between numerical and laboratory data in terms of free surface displacement, overtopping rate and pressure distribution. Based on this study, ISPHP model is an efficient method for simulating the coastal applications with porous structures. 相似文献
4.
波浪对透空式结构物冲击作用的光滑粒子流体动力学数值模拟 总被引：3，自引：0，他引：3
基于光滑粒子流体动力学(SPH)方法的二维数值波浪水槽模拟了规则波对透空式结构物的冲击作用。通过黎曼解和CSPM相结合的方法对连续方程和动量方程进行了修正。对造波边界采用虚粒子法模拟。提出了一种耦合计算方法来消除造波边界附近的压力波动现象,在结构物边界处设置了适合的冲击边界条件。应用修正的SPH模型模拟了规则波对浪溅区结构物的冲击作用,给出了结构物附近流场和压力场的变化特征,并应用物理模型试验结果对数值模型进行了验证。 相似文献
5.
In this work, sloshing flows were successfully simulated by using a coupled numerical scheme between smoothed particle hydrodynamics (SPH) and smoothed point interpolation method (S-PIM) (SPH-SPIM coupled method). SPH is a Lagrangian particle method to solve flow fields while S-PIM is developed to deal with the structure dynamics. A coupling scheme is proposed, the key of which is that the fluid and solid fields are not necessary to be discretized by the same resolution. The stability, accuracy, convergence and conservation of the SPH-SPIM coupled method were validated by the case of hydrostatic water column on an elastic plate. Then, a wave impact problem was simulated to verify that the present SPH method worked well for sloshing flows. Finally, two sloshing problems with an elastic baffle were simulated, which validated the accuracy and stability of the method in predicting the fluid-structure interaction (FSI) features during the process of sloshing. It has been found that both the shape of the free surface and the large deformation of the elastic baffle can be well captured by the present method, which shows the potential of the present method to be a good candidate for simulating sloshing problems. 相似文献
6.
When ordinary Smoothed Particle Hydrodynamics (SPH) method is used to simulate wave propagation in a wave tank, it is usually observed that the wave height decays and the wave length elongates along the direction of wave propagation. Accompanied with this phenomenon, the pressure under water decays either and shows a big oscillation simultaneously. The reason is the natural potential tensile instability of modeling water motion with ordinary SPH which is caused by particle negative stress in the computation. To deal with the problems, a new sextic kernel function is proposed to reduce this instability. An appropriate smooth length is given and its computation criterion is also suggested. At the same time, a new kind dynamic boundary condition is introduced. Based on these improvements, the new SPH method named stability improved SPH (SISPH) can simulate the wave propagation well. Both the water surface and pressure can be well expressed and the oscillation of pressure is nearly eliminated. Compared with other improved methods, SISPH can truly reveal the physical reality without bringing some new problems in a simple way. 相似文献
7.
针对近岸海域极端海况的防灾减灾问题,准确模拟追踪海啸波传播过程,再现液面局部射流、崩破波等波面湍动现象。建立SPH数值水槽,边界条件基于固壁粒子法,减少海堤坡角改变对计算域精度的影响,讨论粒子间距设置对模拟精度的影响。模拟7种不同海堤坡角下波浪的爬高与衰减情况,讨论了海堤坡角变化对消波系数的影响。当粒子间距设置为0.002 m时,模型能准确地捕捉海啸波的强非线性现象。随着海堤坡角增大,海啸波峰值爬升率增大,波浪越堤后因崩破波的产生,波能衰减进一步加剧。当坡角较小时,消波系数随坡角的增大提升明显,而后趋于缓慢增长。 相似文献
8.
为研究以流体粒子描述波浪运动，以固体单元描述砾石运动的两相介质大变形运动，在港口、海岸工程科学研究中具有重要意义。本文提出砾石单元法（GEM），介绍了光滑粒子动力学方法（SPH）和GEM的基本原理，阐述了GEM与离散单元法（DEM）的异同之处，说明了采用SPH方法与GEM构建波浪砾石耦合运动数学模型的方法和过程。应用SPH方法建立数值波浪水槽，用GEM模拟波浪作用下堆积砾石的滚落、坍塌变形，构建了SPH方法与GEM耦合数学模型。模拟了水槽造波和波浪生成过程和波浪作用下砾石的滚落、坍塌变形，并与物理模型试验成果进行了比较，结果基本吻合。本文提出的GEM法具有模拟单相堆积砾石运动和堆积砾石与流体粒子耦合多相介质运动的功能，是对DEM法的补充和改善。本文提出的堆积力学球概念和拟序排列求解方法是砾石单元法的重要组成部分。 相似文献
9.
为了研究波浪与抛石潜堤相互作用过程中大自由表面变形和堤内渗流等强非线性紊流运动问题,利用改进的MPS法,建立了模拟波浪与抛石潜堤相互作用的MPS法数值计算模型。模型将抛石潜堤假定为均质多孔介质,采用Drew的二相流运动方程描述多孔介质内外的流体运动;通过在动量方程中增加非线性阻力项,并引入亚粒子尺度紊流模型,模拟波浪与可渗结构物相互作用过程中的紊流运动。选取“U”型管中多孔介质内渗流过程和孤立波与可渗潜堤相互作用两个典型的渗流问题,通过将数值计算结果与理论解和实测值的对比分析,对所提出的MPS法紊流渗流模型的模拟精度进行验证。结果表明:基于改进的MPS法构建的垂向二维紊流渗流模型可以很好地再现“U”型管中多孔介质内渗流以及波浪作用下可渗潜堤内外的复杂流场,显著缓解流-固界面处的压力震荡与粒子分布不均匀问题,实现了较高的模拟精度。 相似文献
10.
应用经CSPM法和黎曼解修正后的光滑粒子流体动力学(SPH)方法,建立了主动吸收无反射数值波浪水槽,研究波浪作用下多孔介质结构的水动力特性。流体运动控制方程采用N-S方程,多孔渗水结构内流体的运动控制方程考虑渗流力的影响。数值计算结果给出了水槽内不同位置测点的波面历时曲线和越浪量随时间变化曲线,并同试验结果和Philip Liu的数值计算结果进行了比较。并对一个波浪周期内斜坡堤多孔介质结构内外的速度场和压力分布进行了讨论分析。计算分析表明,数值计算波面较Philip Liu的计算结果与试验结果吻合更好。说明应用SPH方法建立的二维数学模型能够较好地模拟破碎波在多孔渗水斜坡上的爬坡和越浪。 相似文献
11.
A set of canonical problems in sloshing, Part I: Pressure field in forced roll—comparison between experimental results and SPH 总被引：1，自引：0，他引：1
In this article, impact pressure in the case of shallow water sloshing is investigated experimentally and numerically for forced rolling motion. The maximum values of impact pressures have been found for a frequency lower than the first sloshing frequency. Experimental results are compared with numerical ones obtained using smoothed particle hydrodynamics (SPH). The influence of viscosity and of density re-initialization on the SPH results are discussed. A new method for calculating the pressure on walls with SPH is presented. 相似文献
12.
基于Mohr-Coulomb准则的黏弹-塑性海冰动力学本构模型 总被引：10，自引：1，他引：10
针对中小尺度下海冰动力作用过程中的漂移、重叠和堆积特征,在连续介质力学基础上建立了一个黏弹塑性海冰动力学本构模型.该模型主要包括四部分,即海冰在屈服前的Kelvin Vogit黏弹模型、海冰塑性屈服的Mohr Coulomb准则、屈服后相关联的正交流动法则和影响海冰强度的静水压力.采用黏弹塑性本构模型对规则海域内的海冰堆积过程进行了数值试验,其结果与传统黏塑性模型、改进的黏塑性模型和经典冰坝理论的解析解相符,可合理地模拟海冰堆积的动力过程.为进一步检验该黏弹塑性本构模型的适用性,对渤海海冰的动力过程进行了48h的数值模拟,计算结果与海冰卫星遥感现场观测资料一致.通过与传统的黏塑性和改进的黏塑性模型结果的对比分析,进一步验证了黏弹塑性模型在中小尺度海冰动力学模拟中的可靠性.在以上海冰堆积的数值试验和渤海海冰动力学模拟中均采用了光滑质点流体动力学(SPH)方法. 相似文献
13.
基于光滑粒子流体动力学(SPH)方法,开发了能够准确描述水流作用下圆柱强迫振动特性的数学模型。通过引入适合于无网格粒子法的开边界算法,来模拟出入流边界条件,建立了具有造流功能的SPH数值水槽。圆柱及计算域的上下边界均采用修正的动力边界条件进行模拟。借助于粒子位移矫正和压力修正算法,避免了圆柱周围流体粒子压力大幅震荡以及结构下游区域出现空腔等非物理性现象。使用典型的圆柱绕流数据,验证了所建SPH模型的计算性能,研究了固定圆柱在低雷诺数情况下的尾涡脱落模式和升阻力变化规律。明确了低雷诺数下强迫振动圆柱在频率锁定以及非锁定区间内的升力变化规律,量化了升力与外界激励频率之间的关系。 相似文献
14.
Coupled SPHS–BEM method is proposed for transient fluid–structure interaction problems: SPH shell (SPHS) is selected to discretize shell structures, the second-order doubly asymptotic approximations (DAA2) of boundary element method (BEM) is chosen to analyze flow-field. BEM can remedy the expensive costs for three-dimensional SPH (smoothed particle hydrodynamics), yet SPHS provides a structural solver for BEM. The coupled method is attractive, since only a layer of SPHS particles and a piece of flow-field boundary elements are needed to be modeled; the compatibility conditions of the coupled surface are performed with moving least square (MLS) function. The final two benchmarks on underwater impacts prove the feasibility, stability and accuracy of the proposed method. 相似文献
15.
SUN Dapeng LI Yucheng TENG Bin
Associate Professor the State Key Laboratory of Coastal Offshore Engineering Dalian University of Technology Dalian
Professor the State Key Laboratory of Coastal Offshore Engineering Dalian University of Technology Dalian 《中国海洋工程》1999,(2)
For higher accuracy in simulating the transformation of three dimensional waves,in consid-eration of the advantages of constant panels and linear elements,a combined boundary elements is appliedin this research.The method can be used to remove the transverse vibration due to the accumulation ofcomputational errors.A combined boundary condition of sponge layer and Sommerfeld radiation condi-tion is used to remove the reflected waves from the computing domain.By following the water particle onthe water surface,the third order Stokes wave transform is simulated by the numerical wave flume tech-nique.The computed results are in good agreement with theoretical ones. 相似文献
16.
The present work is dedicated to the enhancement and application of the recently developed δ+-SPH scheme for two and three dimensional water entry problems. The cylinder surface presents a circular shape and therefore the position where the flow separation happens is tightly related to the implementation of the boundary condition. A special treatment for the particle shifting between fluid and solid wall is highlighted. Adaptive particle refinement (APR) is applied in this work to reduce the computational cost. It is found that, APR and the δ+-SPH scheme benefit to each other. That is to say the former reduces the computing cost of the latter while in return the latter solves the problem of particle disorder of the inactive particles of the former. Thanks to the combination of APR and δ+-SPH especially in three dimensional (3D) cases, the overall computational cost is significantly reduced while sufficiently fine particle resolution can be obtained in the flow region characterized by large pressure gradient close to the structure surface. The fairly good agreements between the SPH results and the experimental data prove the present SPH model to be a reliable tool in accurately solving the fluid–structure interacting problems in ocean engineering. 相似文献
17.
A numerical model for wave propagation in a harbour is verified by use of physical models.The extended time-dependent mild slope equation is employed as the governing equation,and the model is solved by use of ADI method containing the relaxation factor.Firstly,the reflection coefficient of waves in front of rubble-mound breakwaters under oblique incident waves is determined through physical model tests,and it is regarded as the basis for simulating partial reflection boundaries of the numerical model.Then model tests on refraction,diffraction and reflection of waves in a harbour are performed to measure wave height distribution.Comparative results between physical and numerical model tests show that the present numerical model can satisfactorily simulate the propagation of regular and irregular waves in a harbour with complex topography and boundary conditions. 相似文献
18.
《Coastal Engineering》2006,53(9):723-735
The paper presents an incompressible Smoothed Particle Hydrodynamics (SPH) model to investigate the wave overtopping of coastal structures. The SPH method is a grid-less Lagrangian approach which is capable of tracking the large deformations of the free surface with good accuracy. The incompressible algorithm of the model is implemented by enforcing the constant particle density in the pressure projection. The SPH model is employed to reproduce a transient wave overtopping over a fixed horizontal deck and the regular/irregular waves overtopping of a sloping seawall. The computations are validated against the experimental and numerical data and a good agreement is observed. The SPH modelling is shown to provide a promising tool to predict the overtopping characteristics of different waves. The present model is expected to be of practical purpose if further improvement in the spatial resolution and CPU time can be adequately made. 相似文献
19.
Liquid sloshing is a common phenomenon in the liquid tanks transportation. Liquid waves lead to fluctuating forces on the tank wall. Uncontrolled fluctuations lead to large forces and momentums. Baffles can control these fluctuations. A numerical method, which has been widely used to model this phenomenon, is Smoothed Particle Hydrodynamics(SPH). The Lagrangian nature of this method makes it suitable for simulating free surface flows. In the present study, an accurate Incompressible Smoothed Particle Hydrodynamics(ISPH) method is developed and improved using the kernel gradient correction tensors, particle shifting algorithms, k–ε turbulence model, and free surface particle detectors. Comparisons with the experimental data approve the ability of the present algorithm for simulating shallow water sloshing. The main aim of this study is to investigate the effects of the vertical baffle on the damping of liquid sloshing. Results show that baffles number has a major role in sloshing fluctuation damping. 相似文献
20.
Liquid moment amplitude assessment in sloshing type problems with smooth particle hydrodynamics 总被引：5，自引：0，他引：5
A. Souto-Iglesias L. Delorme L. Prez-Rojas S. Abril-Prez 《Ocean Engineering》2006,33(11-12):1462-1484
Sloshing moment amplitudes in a rectangular tank for a wide range of rolling frequencies are investigated both experimentally and numerically. In a previous paper, Souto et al. [2004. Simulation of anti-roll tanks and sloshing type problems with smoothed particle hydrodynamics. Ocean Eng. 31 (8–9), 1169–1192] numerical results obtained with a 3-D Smooth Particle Hydrodynamics (SPH) formulation were presented. These only corresponded to the phase lag between the tank motion and the liquid response moment. This paper is aimed at improving those results by obtaining accurate values for the moment amplitudes. We present the corrections with respect to the aforementioned implementation that focus on the time integration scheme and on the treatment of the boundary conditions. In addition better quality experimental results are presented. 相似文献