共查询到20条相似文献，搜索用时 62 毫秒
1.
Analysis of Wells turbine design parameters by numerical simulation of the OWC performance 总被引：1，自引：0，他引：1
This paper investigates by numerical simulation the influence of the Wells turbine aerodynamic design on the overall plant performance, as affected by the turbine peak efficiency and the range of flow rates within which the turbine can operate efficiently. The problem of matching the turbine to an oscillating water column (OWC) is illustrated by taking the wave climate and the OWC of the Azores power converter. The study was performed using a time-domain mathematical model based on linear water wave theory and on model experiments in a wave tank. Results are presented of numerical simulations considering several aerodynamic designs of the Wells turbine, with and without guide vanes, and with the use of a bypass pressure-relief valve. 相似文献
2.
In recent times, self-rectifying axial-flow air turbines are being widely employed in oscillating water column (OWC) wave energy converters (WEC). The steady performance of air turbines has been systematically investigated in previous studies. However, there still exists a lack of information on their unsteady performance, such as in the self-starting characteristics and subsequent running behavior. In this study, the unsteady behavior of impulse turbine under various constant-flow conditions is investigated. Experimental studies were conducted to investigate the effects of constant-load on the variations in the rotation speed, the pressure drop and the torque output of the turbine starting from rest. A fully passive flow-driving numerical model is employed for further detailed analysis of the flow and pressure fields. Followed by a well-agreed validation using the corresponding experimental data, the three dimensional (3D) transient model is used to study the effects of the air-flow velocity magnitude and the rotors’ moment of inertia on the self-starting performance of the turbine. Except for the variations in the rotation speed, the pressure drop and the pneumatic torque, the distributions of the flow-field and the pressure over the blades at specific time-points are analyzed. 相似文献
3.
冲击式空气透平是振荡水柱式波能发电装置的二级能量转换装置,具有自启动性能好、在大流量系数区保持较高效率等优势,近年来应用越来越广泛。有学者提出在冲击式透平动叶片尖端安装环结构的设计,可以改善动叶片叶尖间隙处的气流流动形态,提高透平的工作性能。依托于此观点,构建了安装有环结构的冲击式透平的三维定常数值模型,并通过网格数量无关性及试验数据,验证了该数值模型的准确性与可靠性,随后开展了一系列仿真计算。此外,研究了不同环结构厚度对冲击式空气透平输入系数、扭矩系数及透平效率的影响规律,确定最优结构参数,该优化结果可为实际工程应用中冲击式空气透平的结构选型提供可靠依据。后续将对端板、嵌槽等其他尖端结构展开研究,实现冲击式透平的进一步优化。 相似文献
4.
The paper presents a concept of a wave energy converter and the numerical model to calculate the hydrodynamic responses in waves and the power produced by the power take off system. The system consists of an asymmetric floater with an interior U-tank partially filled with water and two lateral air chambers connected by a duct. The motion of the U-shaped oscillating water column, mainly induced by the rolling of the floater, forces the air through the duct where a Wells turbine is installed to absorb the wave energy.The wave-floater hydrodynamics is calculated with a Green's function panel method, while the oscillating water column motions hydro-mechanics are derived from the one-dimensional Euler's equation. The dynamics of the Wells turbine is realistically represented by one additional differential equation on the unknown air pressure fluctuation. This equation is derived assuming small amplitude motions of the water column and assuming the linear isentropic relation is valid for the air thermodynamics in the air chambers. The Wells turbine is characterized by a drastic drop of efficiency above a critical pressure value due to stalling on the blades. The effect of a by-pass valve to prevent stalling is introduced in the numerical model in a simplistic way. The numerical model is implemented and tested for a wave energy converter with a displacement of 1150 t, including 490 t for the interior water column, and an installed turbine with 2.3 m of diameter. An analysis of the influence of changing different design parameters on the system efficiency is also presented. 相似文献
5.
1 .Introduction The Wells turbine ,consisting of several symmetric aerofoil blades ,fixedto a hub,can rotate inthe same direction without anyrectifyingflap valves .It has been consideredto bethe most prospectivewave energy conversion deviceforits simple s… 相似文献
6.
Wells turbine with end plates for wave energy conversion 总被引：1，自引：0，他引：1
Manabu Takao Toshiaki Setoguchi Yoichi Kinoue Kenji Kaneko 《Ocean Engineering》2007,34(11-12):1790-1795
In order to improve the performance of the Wells turbine for wave energy conversion, the effect of end plate on the turbine characteristics has been investigated experimentally by model testing. As a result, it is found that the characteristics of the Wells turbine with end plates are superior to those of the original Wells turbine, i.e., the turbine without end plate and the characteristics are dependent on the size and position of end plate. Furthermore, by using a computational fluid dynamics (CFD), reason of the performance improvement of the turbine has been clarified and the effectiveness of the end plate has been demonstrated. 相似文献
7.
径流式空气透平是振荡水柱式波能发电系统的二级能量转换装置,因其具有结构简单、输出扭矩大、轴向推力小的优势,得到了越来越多的关注。采用计算流体力学软件Ansys-Fluent 12.0,通过数值模拟方法考察了不同转子叶片稠度对径流式空气透平定常无量纲评价参数的影响规律。研究结果表明:虽然径流式透平可在双向气流下实现单向旋转,但当气流通过方向不同时,透平的定常工作性能存在明显差异,这与传统轴流式透平完全不同;此外,稠度对透平效率的影响在不同流量系数范围内也不同。因此,综合考虑气流流向、透平整个工作范围内输出效率,推荐采用的转子叶片稠度为2.34。 相似文献
8.
The performance of a Wells turbine with various non-uniform tip clearances was investigated using computational fluid dynamics (CFD). The investigation was performed on numerical models of a NACA0020 blade profile under steady flow conditions. The performance of turbines with uniform and non-uniform tip clearances was compared. The results were also compared with experimental results in literature. It was shown that the performance of turbine with non-uniform tip clearance is similar with that of turbine with uniform one in terms of torque coefficient, input power coefficient, and efficiency. However, the turbine with non-uniform tip clearance seems to have a preferable overall performance. An investigation on the flow-field around the turbine blade was performed in order to explain the phenomena. 相似文献
9.
The performance of the contra-rotating Wells turbine installed in the LIMPET wave power station is compared to the predicted performance from theoretical analysis and model tests. A reasonable agreement was found between the predicted and measured turbine damping characteristic, however the turbine efficiency was found to be poorly predicted. It is postulated that this is due to the unsteady nature and mal-distribution of flow through the LIMPET turbine, which were not considered in the predictions. It is suggested that the reduced performance of the contra-rotating Wells turbine makes biplane or monoplane Wells turbines with guide vanes better solutions for OWC's. 相似文献
10.
11.
全被动式振荡水翼是振荡水翼式潮流能装置的主要型式之一。对全被动式振荡水翼进行了数值模拟研究,构建了二维数值模型,研究了雷诺数及升沉刚度对全被动式振荡水翼水动力性能的影响。通过流场结构及水动力性能分析研究了典型参量对全被动式振荡水翼获能性能的影响机理,确定了维持其良好水动力性能的参数范围。研究发现,水翼的水动力性能对雷诺数及升沉刚度的变化较为敏感。雷诺数增大,水翼所需升沉刚度随之增加,且水翼可以在更大的参数范围下获得较优的水动力性能。另外,水翼可以在没有升沉刚度的情况下实现周期性运动,其获能甚至优于一些有升沉刚度的情况。最优工况下,平均功率系数和能量转换效率分别为1.07和27.48%。 相似文献
12.
通过水轮机捕能是当前常用的海洋能利用方式之一。桨叶作为水轮机关键部件,其性能一直是研究的重点。针对目前波浪条件下带负载运转的Savonius型水轮机相关捕能性能研究较少的情况,采用数值仿真方法,结合对应工况条件的物理试验,研究了一种Savonius型水轮机在不同波浪环境下带负载运转的捕能性能。采用Star CCM+仿真软件,建立数值波浪水池,设置环境参数,划分网格调整变量进行水轮机运转的水动力模型数值研究。在造波试验水池中利用推板改变波浪周期与波高,进行水轮机运转的物理试验。采集在不同负载下水轮机桨叶的转速和扭矩数据,计算并分析功率等参数,总结变化趋势,评价捕能效果。研究发现水轮机在1.6 s的波浪周期条件下,桨叶承受1.5 N·m负载时达到最佳捕能效果,其功率为23 W。为实际海域中水轮机桨叶的结构设计研究和相关工程应用提供参考。 相似文献
13.
Impulse turbine, working as a typical self-rectifying turbine, is recently utilized for the oscillating water column (OWC) wave energy converters, which can rotate in the same direction under the bi-directional air flows. A numerical model established in Fluent is validated by the corresponding experimental results. The flow fields, pressure distribution and dimensionless evaluating coefficients can be calculated and analyzed. Effects of the rotor solidity varying with the change of blade number are investigated and the suitable solidity value is recommended for different flow coefficients. 相似文献
14.
文中利用实验方法系统研究了负载控制技术对OW C波能转换装置的影响。研究结果表明,当透平完成自起动过程后,在装置输出最佳工况点处,输入波况对平均最佳进气迎角的影响很小,其值基本处于8~10°之间。因此,为实现变工况下波能装置的最佳性能输出,只需保证透平的平均进气迎角始终处于上述范围。反之,利用文中给出的平均最佳进气迎角也可确定透平的最佳转速,进而确定最佳工况点。 相似文献
15.
Control strategies for the Clam Wave Energy Device 总被引：1，自引：0，他引：1
A promising wave energy device being currently investigated is the ‘clam’. The clam extracts energy by pumping air through a specially designed (Wells) turbine. Although operation of the Wells turbine does not require a rectified air flow, some additional control will be necessary to optimize the phase of the clam motion for good efficiencies. An examination of the equation of motion in the time domain suggests the possibility of phase control by mechanical, power take-off, or pneumatic latching. Latching can be shown to increase the efficiency of the device in the longer wavelengths of the wave spectrum, i.e. those of high incident wave power. Equivalently latching could be used to keep the device efficiency high while reducing its size, possibly resulting in cheaper power extraction. 相似文献
16.
为了解决振动水柱式波浪能转换装置收集多向波浪问题,本文设计了半球形多向聚合波道振荡水柱气室结构,以适合远海单点波浪能采集和发电。在规则波正向入射条件下,基于流体仿真分析软件(FLUENT)、流体动力学连续性假设和粘性不可压缩流体动量守恒的运动方程(Navier-Stokes方程)建立半球形振荡气室和三维数值波浪水槽模型。仿真结果表明:增设气室后壁,合理设计波道开口角度实现多向迎波捕获波浪能,优化前壁形状可降低波浪触底反射带来的能量耗散,同时提高了气室内空气压强和出气口速度,有效提升波浪能俘获效率,为后续发电的二次能量转换提供高效的空气动力。 相似文献
17.
18.
The paper presents the effects of blade twist and nacelle shape on the performance of horizontal axis tidal current turbines using both analytical and numerical methods. Firstly, in the hydrodynamic design procedure, the optimal profiles of untwisted and twisted blades and their predicted theoretical turbine performance are obtained using the genetic algorithm method. Although both blade profiles produce desired rated rotational speed, the twisted blade achieves higher power and thrust performance. Secondly, numerical simulation is performed using sliding mesh technique to mimic rotating turbine in ANSYS FLUENT to validate the analytical results. The Reynolds-Averaged Navier-Stokes (RANS) approximation of the turbulence parameters is applied to obtain the flow field around the turbine. It is found that power and axial thrust force from BEMT (Blade Element Momentum Theory) method are under-predicted by 2% and 8% respectively, compared with numerical results. Afterwards, the downstream wake field of the turbine is investigated with two different nacelle shapes. It is found that the rotor performance is not significantly affected by the different nacelle shapes. However, the structural turbulence caused by the conventional nacelle is stronger than that by the NACA-profiled shape, and the former can cause detrimental effect on the performance of the downstream turbines in tidal farms. 相似文献
19.
OWC wave energy devices with air flow control 总被引：1，自引：0，他引：1
A theoretical model is developed to simulate the energy conversion, from wave to turbine shaft, of an oscillating-water-column (OWC) plant equipped with a Wells air-turbine and with a valve (in series or in parallel with the turbine) for air-flow control. Numerical simulations show that the use of a control valve, by preventing or reducing the aerodynamic stall losses at the turbine rotor blades, may provide a way of substantially increasing the amount of energy produced by the plant, particularly at the higher incident wave power levels. From the hydrodynamic point of view, a by-pass valve or a throttle valve should be used depending on whether the wave energy absorbing system is over-damped or under-damped by the turbine. 相似文献
20.
Wave tank tests were carried out to evaluate the total efficiency of a floating OWC Pentagonal Backward Bent Duct Buoy (PBBDB). Two kinds of turbine generators were used in tests. The incident wave power, pneumatic power and electricity were measured. The test results show that the primary efficiency can reach up to 185.98% in regular waves and 85.86% in irregular waves. The total efficiency from wave to wire with Wells turbine-generator set is 33.43% in regular waves and 15.82% in irregular waves. The peak total efficiency of the PBBDB with check valves equipped with the impulse turbine-generator set is 41.68% in regular waves and 27.10% in irregular waves. The efficiency of the turbine-generator set is about 30% in the tests. Obviously, the total efficiency can be further improved with the increasing of turbine efficiency.
相似文献