共查询到19条相似文献，搜索用时 125 毫秒
1.
选取胡安.德富卡洋脊(Juan de Fuca Ridge,JDFR)因代沃(Endeavour)段的17个热液黑烟囱体样品对其中的硫同位素进行分析测定,讨论了因代沃段热液活动区内黑烟囱体成矿的物质来源、将硫同位素数据与已发表的热液流体及硫化物数据耦合,并结合前人的成果得到如下认识:(1)因代沃段硫化物的硫同位素组成与其他无沉积物覆盖的洋脊硫化物硫同位素组成相似,然而其相比于南胡安.德富卡洋脊(South Juan de Fuca Ridge,SJFR)硫化物亏损重同位素;(2)结合前人研究成果,如果SJFR硫化物的硫全部来自基底玄武岩的淋洗与海水中的硫酸盐,那么因代沃段硫化物的硫可能有1%～3%来自沉积物的贡献,故提出因代沃段成矿系统中的硫来源主要来自基底玄武岩,同时伴随有少量海水硫酸盐来源及沉积物来源的硫加入;(3)将硫同位素数据与已发表的热液流体及硫化物数据进行耦合发现热液流体中的沉积物信号与硫化物中的硫可能来自不同的源,并提出沉积物端元可能位于下渗区。 相似文献
2.
大西洋中脊TAG热液活动区海底热液沉积物的硫同位素组成及其地质意义 总被引：8，自引：1，他引：7
对1988年取自大西洋中脊TAG热液活动区的海底表层热液沉积物中36件硫化物样品进行了硫同位素组成分析.结合ODP Leg158的近期成果,对TAG区热液沉积物的硫同位素组成及其时空演变、硫源、硫同位素偏重的原因和硫的演化进行了探讨,得出如下结论:(1)TAG区表层热液沉积物的δ34S值从3.9‰-7.6‰变化,均值为5.98‰,与其它洋中脊热液活动区相比明显偏重.(2)从海底表层区到蚀变玄武岩区,热液沉积物的硫同位素组成有增大的趋势,而时间对热液沉积物的硫同位素组成则没有明显的控制.(3)热液沉积物中硫主要来自玄武岩,部分来自海水硫酸盐,是海水硫酸盐和玄武岩中硫不同程度混合的结果,且各硫源在不同阶段提供硫的比例分配和方式明显不同.(4)与其它无沉积物覆盖洋中脊中热液活动区相比,相对较大比例海水来源硫的加入是导致TAG区硫同位素组成偏重的一个重要原因,而TAG区具备有利海水硫酸盐还原作用进行的温度和水/岩比值条件则是促使该区热液沉积物中海水来源硫相对较多的主要原因.(5)海水的直接混入、流体-玄武岩相互作用、先期形成硫化物的重溶作用和硫酸盐矿物的还原作用是海水和玄武岩直接或间接提供硫的主要方式,也是导致本区硫同位素演化复杂化的主要原因,且硫的演化与海底岩浆作用和构造运动紧密相关. 相似文献
3.
现代海底热液沉积物的硫同位素组成及其地质意义 总被引：17，自引：0，他引：17
共收集到现代海底热液沉积物的1264个硫同位素数据,结合我们对冲绳海槽Jade热液区和大西洋中脊TAG热液区中表层热液沉积物的硫同位素研究成果,对比分析了不同地质-构造环境中海底热液沉积物的硫同位素组成特征及其硫源问题.结果表明:(1)现代海底热液沉积物中硫化物的硫同位素组成集中分布在1‰～9‰之间,均值为4.5‰(n=1042),而硫酸盐矿物的硫同位素组成主要分布在19‰～24‰之间,均值为21.3‰(n=217);(2)无论在洋中脊还是在弧后盆地扩张中心,无沉积物覆盖热液活动区中热液沉积物与有沉积物覆盖热液活动区相比,其硫同位素组成的分布范围相对狭窄;(3)各热液活动区中硫化物硫同位素组成的不同,反映出各自硫源的差异性.无沉积物覆盖洋中脊中热液成因硫化物的硫主要来自玄武岩,部分来自海水,是玄武岩和海水硫酸盐中硫不同比例混合的结果,而在弧后盆地和有沉积物覆盖的洋中脊,除了火山岩以外,沉积物和有机质均可能为热液硫化物的形成提供硫;(4)现代海底热液沉积物硫同位素组成的变化和硫源的不同可能归因于海底热液体系中流体物理化学性质的变化、岩浆演化和构造-地质背景的不同. 相似文献
4.
龟山岛附近海域热液活动流体的来源 总被引：1，自引：0，他引：1
台湾东北部龟山岛附近热液活动区流体的来源较为复杂,判断流体来源同时探讨该地区岩浆活动的程度对于龟山岛热液活动研究具有至关重要的意义。通过测定热液流体中的元素浓度和氢氧同位素特征显示:热液流体的微量元素浓度总体上接近海水值,但是通过Mg浓度为0回推得出热液流体的端员组分较为简单,而且有低Cl-浓度的组分(如地下水)加入,所测定热液流体中海水特征是由于取样过程中海水混入所致,氢氧同位素的对应曲线表明热液流体与该地区海水的同位素特征值不一致,并且不是单一龟山岛上地下淡水来源。龟山岛附近热液流体在氢氧同位素值分布特征上与南胡安得富卡洋脊的深水热液活动流体较为一致。可以初步判断龟山岛附近热液活动流体来源主要由两部分组成:深部物质和龟山岛上的大气降水,深部的岩浆物质在上升过程中,发生相分离,分离相在继续上升的过程中遇到下渗的淡水,两者混合构成了热液流体的端员组分。因此龟山岛热液活动的出现是由于深部物质活动造成的,表明目前该地区地壳活动较为活跃。 相似文献
5.
就在２０多年前,科学家勘查洋中脊系统,首次发现了壮观的黑烟囱由金属硫化物矿物构成的热液火山管强有力地释放出热的、充满粒子的黑色流体进入海洋。这些烟囱喷发的流体的最终来源是海水,但海水和热液流体的化学成分明显不同。喷口流体不仅远比周围的海水热,而且它们的酸性更大,更富集金属,并且具有较高的溶解气浓度,如氢、甲烷和硫化氢等。受流体频繁搬运的金属在海底形成矿床,溶解气供给一个丰富的生物群体,它们是通过化学反应而不是阳光获得能量的。那么,海水是通过什么过程转变成从黑烟囱中喷出的流体的呢？答案就在海底下面… 相似文献
6.
冲绳海槽中部Jade热液活动区中海底热液沉积物的硫同位素组成及其地质意义 总被引：12，自引：3，他引：9
测定了冲绳海槽中部Jade热液活动区中18个热液沉积物样品的硫同位素组式,其中10个硫化物样品的δ34S值为5.2×10-3～7.2×10-3,7个硫酸盐样品的34S值为16.3×10-3～22.3×10-3,1个自然硫样品的δ34S值为8.2×10-3热液沉积物的硫主要来自中、酸性火山岩和海水,并且在流体与沉积物相互作用过程中海底沉积物也可能为热液沉积物的形成提供部分的硫.导致本区热液沉积物中硫化物与其他热液活动区的硫同位素组成不同的原因,主要是各热液活动区的硫源以及有关岩浆活动和构造演变的不同.海底热液体系中硫的演化是一个复杂的过程,涉及被加热海水的上升、流体与火山岩的相互作用、海水硫酸盐和中、酸性火山岩中流的混合作用以及流体与沉积物相互作周等一系列海底热液活动,其中海水和中、酸性火山岩的相互作用是本区硫演化的一个重要机制. 相似文献
7.
建立了一种新的管状模型来模拟普通黑烟囱体的热液循环系统,分别用达西方程、湍流方程、Ergun方程和“浮压力差”方程来描述热液循环不同关键环节处的动力学系统,用一个温度场的对流-扩散方程来描述反应区的热能交换及系统的温度变化规律.在联立几个方程并用有效的数值算法及Matlab语言编程求解后,得出了系统中温度、压力及物质流速随时间的变化曲线,并对黑烟囱体内部的动态热平衡和压力平衡进行了分析.在普通黑烟囱体系统模型的基础上进一步建立了巨型羽状流(巨羽流)生成的数学模型.选择胡安·德富卡(Juan de Fuca)洋脊热液喷口对巨羽流的形成进行了模拟,其结果与Baker根据实测数据估算的近似值吻合很好.在上述模型的基础上进一步探讨了巨羽状流形成的一系列条件及主要参数对巨羽流生成周期、温度和最大物质流速等的影响.主要结论如下:巨羽流系统可以由普通黑烟囱系统发展演化而成,其实际过程是普通黑烟囱流系统活动所形成的热液沉积在一定程度上会堵塞热液喷溢通道(相当于形成盖层),造成热液在海底之下积蓄和升温,从而导致浮压力差增大,经过2~3 a(浮压力差达到盖层破裂极限值)则可形成巨羽流系统,巨羽流产生时的热源温度必须超过500℃,喷出热液的最高温度为413℃左右(与实际观测到的海底热液的最高温度一致).当反应区热源温度增大时,产生巨羽流的临界时间明显变短(可能不到1 a),而临界温度(巨羽流生成时的温度)及巨羽流的最大物质流速几乎不随其变化;随着渗透率的增大,巨羽流的最大物质流速也随之增大,但其增速随渗透率的进一步增大而变缓,并逐渐趋向一个相当于下渗流无摩擦阻力时的极限稳定值. 相似文献
8.
洋中脊和弧后盆地热液区热液流体B同位素组成的系统性差异 总被引：1，自引：0，他引：1
硼(B)是流体迁移元素，趋向于在热液流体中富集而成为常量元素。不同来源的B其同位素组成有着明显的区别。因此，B的含量及其同位素组成可标识热液流体(元素)的物质来源、水–岩反应程度及沉积物(元素)混入等重要过程，对海底热液活动及其成矿作用过程具有重要的示踪意义。迄今，对全球主要热液活动区热液流体中B的含量及同位素组成特征已做了大量的测试分析及研究工作，积累了丰富的资料和重要研究成果。但是，对不同地质背景(构造环境)条件下热液流体中B的含量及同位素组成特征尚缺乏系统性的对比分析，进而对造成不同环境热液流体中元素及其同位素组成的系统性差异的原因或机制尚缺乏深入的认识。本文在获取了洋中脊和弧后盆地主要热液活动区热液端元流体中B的含量及其同位素组成数据的基础上，定量估算了热液流体中B的主要来源，并对洋中脊和弧后盆地热液端元流体中B同位素组成的系统性差异进行了分析及成因探讨。结果表明，不同热液活动区热液端元流体的δ11B值都具有较大的变化范围，水–岩反应过程中不同来源B的混合是热液流体B同位素组成变化的主要原因。无沉积物覆盖的洋中脊和弧后盆地热液区热液流体中的B主要为海水与基底岩石来源B的混合，弧后盆地岩浆挥发性组分对热液系统的直接贡献及两种不同地质背景下基底岩石地球化学组成与水–岩反应程度的差异是其热液端元流体B同位素组成差异的主要原因。在有沉积物覆盖的弧后盆地热液区，热液流体中B的同位素组成与前两者之间存在显著差异，具有异常低的δ11B值，水–岩反应过程中沉积物来源B的加入是导致热液流体中δ11B值系统性降低的主要原因，沉积物的吸附作用也在一定程度上影响了热液流体的B同位素组成。有沉积物覆盖的洋中脊热液区热液流体同样受到了沉积物来源B加入的影响，具有较低的δ11B值，且相对于冲绳海槽受到了更强烈的沉积物吸附作用的影响。基于以上分析，并结合热液流体的Sr同位素组成特征，本文提出了洋中脊和弧后盆地这两大构造环境中热液流体B同位素组成系统性差异的成因模式。 相似文献
9.
对１９８８年取自大西洋中脊ＴＡＧ热液活动区的海底表层热液沉积物中３６件硫化物样品进行了硫同位素组成分析。结合ＯＤＰＬｅｇ１５８的近期成果,对ＴＡＧ区热液沉积物的硫同位素组成及其时空演变、硫源、硫同位素偏重的原因和硫的演化进行了探讨,得出如下结论：（１）ＴＡＧ区表层热液喾物的δ＾３４Ｓ值从２．９‰－７．６‰变化,均值为５．９８‰,与其它洋中论脊热液合活动区相比明显偏重,（２）从海底表层区到蚀变玄武岩 相似文献
10.
大西洋中脊TAG热液活动区中热液沉积物的稀土元素地球化学特征 总被引：4，自引：0，他引：4
用ＩＣＰ－ＭＳ对ＴＡＧ热液活动区表层热液沉积物中６个块状硫化物样品进行了稀土元素分析。所有样品均表现出正Ｅｕ异常（ＥｕＮ／Ｅｕ＊Ｎ＝１．２７～２．６８）和ＬＲＥＥ相对富集（ＬａＮ／ＹｂＮ＝１５．７９～４７．６２）的球粒陨石标准化配分模式,热液沉积物样品中稀土元素组成的变化是由于海底热液循环体系中热液流体和海水不同程度混合作用的结果,并且,海水与热液流体的混合作用是在热液沉积物形成以前发生的,与黑烟囱流体的稀土元素配分模式对比,表明热液沉积物的ＲＥＥ部分来自下伏的玄武岩基底,在热液沉积物的形成过程中,ＬＲＥＥ得到了较高程度的富集,同时,海底热液沉积物的稀土元素中Ｅｕ的变化可以一定程度的反映出热液流体的演化特征。 相似文献
11.
Geologic setting of the Snake Pit hydrothermal site: An active vent field on the Mid-Atlantic Ridge 总被引：2，自引：0，他引：2
TheSnake Pit Hydrothermal Site lies on the axis of the Mid-Atlantic Ridge at 23°22′ N latitude, about 30 km south of the Kane Transform
Intersection. Active ‘black smoker’ vents and a surrounding field of hydrothermal sediment occur at the crest of a laterally
extensive neovolcanic ridge. It is one of the first active hydrothermal vent fields to be found on a slow-spreading ridge
axis and despite significant differences in its geologic setting from those of the East Pacific Rise, has many similarities
to its fast-spreading counterparts. Although preliminary reports have documented many interesting aspects of these vents and
their surroundings, new data collected from the manned submersible ALVIN and the deep-towed ANGUS camera system define the
regional tectonic setting as well as the local geologic environment of this fascinating area.
The Snake Pit vents are located on a local peak of a volcanic constructional ridge at a depth of 3450 m, 700–800 m deeper
than vents known from the East Pacific Rise, Galapagos, or Juan de Fuca spreading centers. The vent field is at least 600
m long and up to 200 m wide and is covered by a thick blanket of greenish to yellow-orange hydrothermal sediment. Both active
and extinct vents are perched along the crests of steep-sided sulfide mounds that reach heights of over 40 m. High-temperature
(350° C) fluids are vented from black smoker chimneys and low-temperature (226° C) fluids seep from sulphide domes and subordinate
anhydrite constructions. Water temperatures, flow rates, fluid chemistries, and mineralization are strikingly similar to vents
of faster spreading ridge crests; however, a somewhat distinct fauna inhabit the area. 相似文献
12.
Abundance and distribution of fatty acids within the walls of an active deep-sea sulfide chimney 总被引：3，自引：0，他引：3
Jiwei Li Huaiyang Zhou Xiaotong Peng Meiyan Fu Zhiqiang Chen Huiqiang Yao 《Journal of Sea Research》2011,65(3):333-339
Abundance and distribution of total fatty acids (TFAs) were examined along the physicochemical gradient within an active hydrothermal chimney collected from the Main Endeavour segment of Juan de Fuca Ridge. Approximately 27 fatty acids are identified with a chain-length ranging from C12 to C22. From the exterior to the interior of the chimney walls, the total concentrations of TFAs (∑ TFAs) show a trend of evident decrease. The observed compositions of TFAs are rich in bacterial biomarkers especially monounsaturated fatty acids (MUFAs) and minor branched and cyclopropyl FAs. On the basis of the species-specific FAs and bacterial 16SrRNA gene analysis (Li et al., unpublished data), sulfur-based metabolism appears to be the essential metabolic process in the chimney. Furthermore, the sulfur oxidizing bacteria (SOB) are identified as a basic component of microbial communities at the exterior of the hydrothermal chimney, and its proportion shows an inward decrease while the sulfate reducing bacteria (SRB) have an inverse distribution. 相似文献
13.
Gravity data collected at two different levels, sea-surface and seafloor, are compared and interpreted to characterize the effect of hydrothermal circulation on the sediment density in Middle Valley, a deeply sedimented spreading center on the Juan de Fuca Ridge. The sea-surface gravity data constrain density variations at depth beneath the seafloor, whereas sea-bottom measurements are more sensitive to shallow sources. At least two different types of hydrothermal signatures in the sediments can be distinguished from the gravity data: short-wavelength anomalies associated with sulfide deposits and broader anomalies associated with areas of lithified sediments. In Middle Valley, three distinct gravity anomalies were identified. (a) An anomaly over a sulfide mound, south of Bent Hill, shows that the sulfide body extends to depths of 120 to 180 m and has been fed by several near-surface conduits. (b) An anomaly at the base of the fault bordering the valley to the east is interpreted as a regional anomaly combined with the local effect of lithified sediments and possibly sulfide deposits. (c) An anomaly paralleling an intra-valley fault, that limits the deepest part of the graben, is interpreted as indicating lithification of the upper sediment layer. A high heat flow anomaly is located 1 to 2 km east of this fault, suggesting that sediment lithification occurred in a wide band above the fault and eastward to the current high heat flow area, due to the progressive migration of the hot fluid circulation. 相似文献
14.
Bemis Karen G. Rona Peter A. Jackson Darrell Jones Christopher Silver Deborah Mitsuzawa Kyohiko 《Marine Geophysical Researches》2002,23(2):81-96
Quantitative visualization of acoustic images is used to compare the properties and behavior of high temperature hydrothermal plumes at two sites with different source configurations, increasing our understanding of how plume behavior reflects source configuration. Acoustic imaging experiments were conducted at the Clam Acres area of the Southwest Vent Field, 21°N East Pacific Rise and at Monolith Vent, North Cleft segment, Juan de Fuca Ridge. At Clam Acres, black smokers discharge from two adjacent chimneys which act as point sources, whereas multiple vents at Monolith Vent define a distributed elliptical source. Both plumes exhibit consistent dilution patterns, reasonable fits to the expected power law increase in centerline dilution with height, and simple bending of plume centerlines in response to ambient currents. Our data suggest that point source vents are associated with ordered plume structure, normal entrainment rates, and initial expansion of isosurfaces while distributed source vents are associated with disorganized plume structure, variable entrainment rates, and initial contraction of isosurfaces. 相似文献
15.
《Deep Sea Research Part I: Oceanographic Research Papers》2006,53(10):1677-1694
Transparent exopolymer particles (TEP) have recently been recognized as a class of sticky particles that often stimulate macroaggregate formation. Until now, TEP studies were focused on surface waters, particularly in association with diatom blooms. This is the first report of TEP concentrations in an open ocean deep-sea hydrothermal plume environment. The occurrence of TEP in deep water demonstrates its existence in an environment that is devoid of growing phytoplankton, the organisms generally regarded as TEP's primary source. The main objective of this study was to investigate the presence and potential abundance of TEP within hydrothermal plumes over the Juan de Fuca Ridge. Samples for TEP and bacteria were collected from CTD-rosette casts through hydrothermal plumes over the Juan de Fuca Ridge during the summers of 1999 and 2000. Concentrations of TEP and bacteria within the hydrothermal plumes were significantly greater than in background seawater. TEP number and volume concentrations reported here are low compared to reported values for shallow environments, but are substantially higher than published reports of TEP in other deep water environments. Ratios of TEP anomalies to temperature anomalies (a conservative hydrothermal tracer) increased with distance from the apparent plume source, suggesting that TEP are produced within the aging hydrothermal plumes. Potential TEP sources associated with hydrothermal plumes are discussed. TEP in hydrothermal plumes could stimulate in situ aggregate formation, support populations of attached bacteria, and serve as a potential food source to zooplankton. 相似文献
16.
Basic mathematical model for the normal black smoker system and the hydrothermal megaplume formation
A tube model to simulate the normal black smoker system has been built, where the Darcy flow equation, the Ergun equation and the turbulent pipe flow equation are used respectively to describe the dynamic process of different key areas in the hydrothermal circulation system. At the same time, a convection-diffuse Equation for the temperature field is used for describe the exchange of thermal energy and the law of temperature variation. Combining the above facts and using efficient mathematical algorithms and programming with the MatLab programming language, the variation curves of temperature, pressure and mass flow rate are determined, while also the dynamic heat equilibrium and pressure equilibrium within the black smoker system are analyzed. On the basis of the model of the normal black smoker system, a megaplume formation model is further built. For instance, the hydrothermal venting plume on the Juan de Fuca Ridge has been simulated and the simulation results are fairly consistent with Baker's imputed data in 1986. On the basis of the above productive simulation, a series of factors for megaplume formation and the effectiveness of the main parameters of the periodicity of the megaplume formation, temperature and the maximum mass flow rate are systematically discussed. Main conclusions are as follows: The normal black smoker system can evolve into a megaplum eruption. In fact, the passageway of the hydrothermal discharge is blocked by the hydrothermal sediments during the black smoker period, which leads to a hydrothermal fluid accumulation, rise of temperature and increase of buoyancy pressure under the seabed. After a period of 2~3 a, the megaplume hydrothermal eruption will occur when the increasing buoyancy pressure is high enough to crack the blockage (cap).Meanwhile, the temperature of the heat source must exceed 500 ℃, while the highest temperature of the eruption fluid may be high up to 413 ℃, which is fairly consistent with the surveying data.If the temperature of the heat source were to be higher than 500 ℃, then the critical period for the megaplume formation could be obviously curtailed to be less than 1 a, while the critical temperature and the maximum mass flow rate are nearly invariable. As the permeability increases, the maximum mass flow rate increases gradually close to a steady value. 相似文献
17.
西南印度洋中脊热液产物稀土元素组成变化及其来源 总被引：1，自引：1，他引：0
对西南印度洋中脊热液区不同热液产物稀土元素(REE)进行了分析,探讨了热液产物形成过程中稀土元素组成变化及其来源。研究结果表明:不同热液产物稀土元素总量变化范围从3.47×10-7到4.80×10-5,轻重稀土比值(LREE/HREE)从2.06到6.16,表明轻重稀土有较大程度分异,δEu异常(δEu=0.86~3.88)和δCe异常(δCe=0.40~0.86)显示热液产物中REE呈Eu富集和Ce亏损特征。稀土元素球粒陨石标准化模式呈现两种类型:(1)呈轻微富集LREE的平坦模式,REE大于2×10-5;(2)呈显著富集LREE和正Eu异常模式,REE小于5×10-7。模式1类似于洋壳火山岩REE配分模式,而模式2与西南印度洋中脊黑烟囱REE模式相似,也与典型洋中脊热液喷口流体和硫化物LREE富集和正Eu异常模式类似。热液产物中稀土元素含量变化和模式特征以及Mg与LREE极强正相关关系可能反映了西南印度洋中脊硫化物形成在热液流体与海水混合沉淀的初始阶段,后期经历了广泛的热液流体再循环和海水蚀变过程。 相似文献
18.
J. Sarrazin P. Rodier M.K. Tivey H. Singh A. Schultz P.M. Sarradin 《Deep Sea Research Part I: Oceanographic Research Papers》2009,56(11):2065-2074
Numerous attempts have been made over the last thirty years to estimate fluid flow rates at hydrothermal vents, either at the exit of black smoker chimneys or within diffuse flow areas. In this study, we combine two methods to accurately estimate fluid flow velocities at diffuse flow areas. While the first method uses a hot film anemometer that performs high-frequency measurements, the second allows a relatively rapid assessment of fluid flow velocity through video imagery and provides in situ data to calibrate the sensor. Measurements of flow velocities on hydrothermal diffuse flow areas were obtained on the Mid-Atlantic Ridge (MAR). They range from 1.1 to 4.9 mm/s at the substratum level, in low-temperature (4.5–16.4 °C) diffuse flow areas from the Tour Eiffel sulfide edifice. A strong correlation was observed between fluid flow velocities and temperature, supporting the possible use of temperature as a proxy to estimate the flow rates in diffuse flow areas where such a simple linear flow/temperature relation is shown to dominate. 相似文献
19.
Eighteen samples of hydrothermal sediments from the Jade hydrothermal field in the central Okinawa Trough have been analyzed. Sulfur isotopic values for 10 sulfide samples vary from 5.2 × 10~(-3) to 7.2× 10(-3), δ~(34)S values for 7 sulfate samples vary from 16.3 × 10~(-3) to 22.3 × 10~(-3), and 1 native sulphur sample has a δ~(34)S value of 8.2× 10~(-3). The major sources of sulfur for hydrothermal sediment are intermediate to acid volcanic rocks and sea water sulfate, and it is possible that the partial sulfur of hydrothermal sediment is from the pelagic sediment by the interaction between hydrothermal fluid and sediment. The reasons of causing the distinct differences in sulfur isotopic values for sulfide samples from hydrothermal sediment ( compared with other hydrothermal fields), are the differences in the sources of sulfur, the magmatic activity and the tectonic evolution in different hydrothermal fields. The sulfur evolution is a long and complex process in the seafloor hydrothermal system 相似文献