共查询到20条相似文献，搜索用时 109 毫秒
1.
The dependence of stream depletion by seasonal pumping on various hydraulic characteristics and engineering factors 总被引：3，自引：2，他引：1
Compensation pumping is used to alleviate deficiencies in streamflow discharge during dry seasons. Short-term groundwater pumping can use aquifer storage instead of catchment-zone water until the drawdown reaches the edge of the stream. The capacitance is a complex, dimensionless parameter of an aquifer system that defines the delayed effect on streamflow when there is groundwater pumping. This parameter is a function of aquifer hydraulic characteristics, pumping time, and distance between the well and stream edge; the latter can involve stream leakance and vertical leakance of an associated aquitard. Three typical hydraulic cases of combined water systems (major catchment-zone wells close to the stream and compensation pumping wells) were classified depending on their capacitance structure (i.e. the relationship between surface water and groundwater): (1) perfect hydraulic connection between the stream and aquifer; (2) imperfect hydraulic connection between the stream and aquifer; and (3) essentially imperfect hydraulic connection between the stream and the underlying confined aquifer. The impact of various hydraulic characteristics and engineering factors on stream depletion was examined by conceptual and numerical modeling. To predict the suitability and efficiency of a combined water system application, regression tests were undertaken on unit stream depletion and capacitance, and power dependencies were defined. 相似文献
2.
Antonella Baiocchi Francesca Lotti Simone M. Piacentini Vincenzo Piscopo 《Environmental Earth Sciences》2014,72(4):989-996
Determining the yield of a production well remains one of the main problems in hydrogeological studies. Starting from the results of a 3-year-long monitoring of a continuously exploited well functioning at constant head (i.e., at a variable discharge rate), a new pumping style has been examined using numerical models. The objective is to control the impact of pumping on the aquifer in accordance with the principle of sustainability. Different models were developed in a transient state and were calibrated using discharge data of the well during the recession periods. Successively, the trends of the residual outflow from the aquifer system with the well operating at variable discharge and at constant discharge were simulated. The results indicate that the ratio of the volume of water pumped from the well to the volume of residual outflow is a significant indicator of the sustainability of groundwater withdrawals. Modeling confirms that a constant discharge rate can be derived from the information gained through a preliminary production phase of a well at constant head. This approach appears to be particularly useful when the problem is determining the sustainable yield of a single well from aquifers with low hydraulic diffusivity. 相似文献
3.
Field observation and numerical simulations were carried out to evaluate the hydraulic relationship between the shallow and deep aquifer of a High Plains Aquifer system, in which shallow and deep aquifers are separated by an aquitard. Pumping from the lower aquifer resulted in a small drawdown in the upper aquifer and a larger drawdown in the aquitard; pumping from the shallow aquifer caused a small drawdown in the aquitard and the deep aquifer. Analysis of pumping test data gives the values of the hydraulic conductivity of the aquitard and the deep aquifer. Long-term observation of groundwater levels in the shallow and deep aquifers showed that a strong downward hydraulic gradient was maintained during an irrigation season. Numerical simulations were used to calculate the induced leakage of water from the shallow to the deep aquifer. Water budget analyses suggested that after pumping continues for a couple of days, the leakage from the overlying layers begins to supply the majority of the withdrawal from the deep aquifer. However, the induced leakage from the upper shallow aquifer can travel only a few meters into the aquitard, and it can not reach the lower aquifer during a 90 day pumping period. The major portion of the induced leakage occurred during the pumping period, but a small leakage can continue as a residual effect after the pumping period. The vertical hydraulic conductivity of the aquitard plays a major role in partitioning the ratio of the induced leakage for the pumping and after-pumping periods. 相似文献
4.
Parsimonious groundwater modeling provides insight into hydrogeologic functioning of the Nubian Aquifer System (NAS), the world’s largest non-renewable groundwater system (belonging to Chad, Egypt, Libya, and Sudan). Classical groundwater-resource issues exist (magnitude and lateral extent of drawdown near pumping centers) with joint international management questions regarding transboundary drawdown. Much of NAS is thick, containing a large volume of high-quality groundwater, but receives insignificant recharge, so water-resource availability is time-limited. Informative aquifer data are lacking regarding large-scale response, providing only local-scale information near pumps. Proxy data provide primary underpinning for understanding regional response: Holocene water-table decline from the previous pluvial period, after thousands of years, results in current oasis/sabkha locations where the water table still intersects the ground. Depletion is found to be controlled by two regional parameters, hydraulic diffusivity and vertical anisotropy of permeability. Secondary data that provide insight are drawdowns near pumps and isotope-groundwater ages (million-year-old groundwaters in Egypt). The resultant strong simply structured three-dimensional model representation captures the essence of NAS regional groundwater-flow behavior. Model forecasts inform resource management that transboundary drawdown will likely be minimal—a nonissue—whereas drawdown within pumping centers may become excessive, requiring alternative extraction schemes; correspondingly, significant water-table drawdown may occur in pumping centers co-located with oases, causing oasis loss and environmental impacts. 相似文献
5.
Jianxiu Wang Tianrong Huang Jian Hu Lingao Wu Guo Li Ping Yang 《Environmental Earth Sciences》2014,71(7):3245-3257
A whirlpool foundation pit is a small-diameter, deep circular pit. Because of its depth and small diameter, a large drawdown is required, and a limited number of wells can be installed inside the pit. During excavation, partially penetrating wells inside and outside the foundation pit have to be installed to lower the water level when the aquifer is too thick. However, partially penetrating wells near partially penetrating curtains cannot be treated by analytical methods. Therefore, it is necessary to use numerical methods to predict dewatering during excavation. Field experiments were performed on whirlpool foundation pit 1880 of Baosteel Group, Shanghai, China, to obtain pumping rates and drawdown, pumping with a single well and two wells in the confined aquifer. The results indicate that the drawdown inside the pit induced by pumping wells outside the foundation pit was small, whereas it was large for pumping wells inside the pit. The pumping wells inside and outside the pit had to be combined to lower the water level. A three-dimensional numerical model was developed to simulate the dewatering process. The hydraulic conductivities of the confined aquifers were inversed by using the pumping tests. Operation schedules were simulated with the corrected model for different combinations of wells inside and outside the pit. The results suggest that different schedules and operation conditions affect drawdown. The monitored results during dewatering indicate that the simulation and field measurements were in agreement. The results can be applied to similar situations. 相似文献
6.
Zhou Xun Chen Mingyou Wan Li Department of Water Resources Environmental Engineering China University of Geosciences Beijing China Wang Juping Ning Xuesheng Beihai Institute of Hydrogeology Engineering Geology Mineral Resour 《中国地质大学学报(英文版)》2000,11(3)
INTRODUCTIONThe city of Beihai,located on the south coast ofGuangxi,China,relies heavily on groundwater for its potablewater supply and agricultural irrigation.With rapid increasein population (for instance,from 134 0 0 0 in 1987to 47930 0in1995 ) and in developm ent program s,the demand for freshwater has been growing. Approxim ately 170 0 0 0 m3/ d ofgroundwater has been pumped from the productive coastalaquifers in recent years.Contamination of the fresh water inthe coastal aquifers b… 相似文献
7.
以单井抽水试验资料为基础,计算出该区的新近系砂砾岩含水层的出水量为40m^3/h。为解决水源热泵系统的热源及同层回灌问题,进行了较长时间的带有观测孔的抽水试验及回灌试验。试验表明：该区的渗透系数为32.16m/d,影响半径为166m,回灌渗透系数为14.38m/d,回灌影响半径为61m。据此计算干扰井单井抽水量为38.51m^3/h,干扰井单井回水量为11.14m^3/h,同时确定该区的抽灌井比例为1∶4。根据用水需求,该区设计抽水两口,回灌井8口,备用一口回灌井,形成该区的水源热泵系统。系统运行近两年来,单井出水量、回灌量及水位降深均符合设计要求,达到了预期效果。 相似文献
8.
工程建设中当距离抽水井r=rb处水位基本没有变化或不受抽水影响时,或当此处存在止水帷幕时,含水层系统视为侧向有限延伸,rb为有限半径。为此,构建更加符合工程实际的侧向有限延伸的典型弱透水层-承压水层系统中非完整井非稳定流计算模型,同时考虑井径和井储效应的影响,应用Laplace变换和分离变量法得到了水位降深在拉氏空间下的解析解,并应用拉氏数值逆变换Stehfest法得到真实空间下的水位降深。新建立的解析解可以进一步退化为诸多已有解,并进一步将其与已知解和有限元数值解进行对比,验证了所得解的正确性和可靠性。基于新建解重点分析了侧向边界和井的完整性对承压水层水位降深的影响。结果表明:含水层系统的侧向有限边界仅对抽水后期的水位降深影响明显,含水层系统侧向无限延伸情况下的水位降深要大于情形1(在r=rb处为定水头边界)且明显小于情形2(在r=rb处为不透水边界)下的水位降深,rb越小,两者之间的误差越大;抽水井的完整性对整个抽水期间不同情形下的水位降深均有明显的影响,承压含水层顶板处的水位降深随着抽水井滤管的长度和埋深的增加而减小。 相似文献
9.
Shashank Shekhar 《Hydrogeology Journal》2006,14(6):1018-1027
To understand the behaviour of drawdown with discharge under site-specific conditions, a step drawdown test (SDT) was conducted on a tubewell in alluvium near Delhi, India, and the data were analyzed to find the value of well efficiency. The entrance velocity of groundwater into the well screen was computed to see if it exceeded the safety limit of 0.03 m/s. Reynold's number (Re) was also calculated to study the nature of flow at the well screen. The decrease in efficiency of the well at higher discharge was attributed to an increase in turbulence and curvature of the flow path of water. An alternative, more efficient approach has been put forward, using a spreadsheet programme to fit a polynomial trend line on a plot of drawdown versus discharge and deriving a polynomial trend line equation. This equation predicts the behaviour of drawdown with discharge under site-specific conditions. The calculated efficiency of the tubewell can, at best, be regarded as a reflection of head loss on account of the laminar flow from the aquifer. 相似文献
10.
为了更加准确地确定含水层参数,提出了利用地下水流数值模拟软件Modflow耦合大型抽水试验和长观孔水位两个模型的方法,对含水层参数进行了识别与校验。该方法求得的含水层参数避免了只利用抽水试验模型校验所带来的不确定性,同时利用抽水实验数据进行抽水与恢复的全过程曲线拟合,水位降深模拟相对误差小于6%,提高了含水层参数的准确性。 相似文献
11.
Wang Jianxiu Liu Xiaotian Liu Shaoli Zhu Yanfei Pan Weiqiang Zhou Jie 《Acta Geotechnica》2019,14(1):141-162
Water level is decreased during foundation pit excavation to avoid water inrush under confined water pressure. Cut-off wall is often used as waterproof curtain to partially cut off the dewatered aquifer. When a foundation pit is located in a built-up area and the underlying confined aquifer is not cut off, the drawdown must be minimized outside the pit to avoid land subsidence in buildings and pipelines. The coupling effect of the cut-off wall and pumping well is used to control the drawdown outside the foundation pit. However, the coupling mechanism is not intuitively well understood because of the limitations of existing experimental methods. In this study, transparent soil was introduced to model the coupling mechanism in the physical model test. High-purity fused silica and mixed paraffin oil were used as skeleton and fluid to simulate the confined aquifer and groundwater. Industrial solid dye and paraffin oil were used as tracers. A camera was used to collect flow information. Tests were performed for the combinations of cut-off wall and partially penetrating pumping wells. The insertion depth ratio of the cut-off wall most effectively influenced the drawdown. The layout of the pumping wells in horizontal direction influenced water level distribution and flow rate. The optimal depth of the pumping wells was 1–5 m above the bottom of the cut-off wall, and the optimal horizontal distance between the cut-off wall and the pumping wells was 25% of the pit width. Non-Darcy flow was observed within the range of 0–10 m around the bottom of the cut-off wall. These results were significant in understanding the cut-off wall and pumping well coupling effect on foundation pit dewatering.
相似文献12.
Modelling the response of an alluvial aquifer to anthropogenic and recharge stresses in the United States Southern Great Plains 总被引：2，自引：0，他引：2
This paper uses Visual MODFLOW to simulate potential impacts of anthropogenic pumping and recharge variability on an alluvial
aquifer in semi-arid northwestern Oklahoma. Groundwater withdrawal from the aquifer is projected to increase by more than
50% (relative to 1990) by the year 2050. In contrast, climate projections indicate declining regional precipitation over the
next several decades, creating a potential problem of demand and supply. The following scenarios were simulated: (1) projected
groundwater withdrawal, (2) a severe drought, (3) a prolonged wet period, and (4) a human adjustment scenario, which assumes
future improvements in water conservation measures. Results indicate that the combined impacts of anthropogenic pumping and
droughts would create drawdown of greater than 12 m in the aquifer. Spatially, however, areas of severe drawdown will be localized
around large-capacity well clusters. The worst impacts of both pumping and droughts will be on stream–aquifer interaction.
For example, the projected aquifer pumpage would lead to a total streamflow loss of 40%, creating losing stream system regionally.
Similarly, a severe drought would lead to a total streamflow loss of >80%. A post-audit of the model was also carried out
to evaluate model performance. By simulating various stress scenarios on the alluvial aquifer, this study provides important
information for evaluating management options for alluvial aquifers. 相似文献
13.
14.
Development of a simple method for determining the influence radius of a pumping well in steady-state condition 
下载免费PDF全文
下载免费PDF全文 A S El-Hames 《地下水科学与工程》2020,8(2):97-107
Influence radius of a pumping well is a crucial parameter for hydrogeologists and engineers. Knowing the radius of influence for a designed drawdown enables one to calculate the pumping rate required to layout a project foundation that may need lowering of groundwater level to a certain depth due to dewatering operation. In addition, this is important for hydrogeologists to determine ground water contamination flow paths and contributing recharge area for domestic water supply and aquifer management purposes. Empirical formulas that usually neglect vital parameters to determine the influence radius accurately have been traditionally utilized due to lack of adequate methods. In this study, a physically based method, which incorporates aquifer hydraulic gradient for determining the influence radius of a pumping well in steady-state flow condition, was developed. It utilizes Darcy and Dupuit laws to calculate the influence radius, where Darcy's law and Dupuit equation, in steady-state condition, represent the inflow and the outflow of the pumping well, respectively. In an untraditional manner, this method can be also used to determine aquifer hydraulic conductivity as an alternative to other pumping test methods with high degree of accuracy. The developed method is easy to use; where a simple mathematical calculator may be used to calculate the influence radius and the pumping rate or hydraulic conductivity. By comparing the results from this method with the MODFLOW numerical model outputs with different simulated scenarios, it is realized that this method is much superior and more advantageous than other commonly used empirical methods. 相似文献
15.
用水位恢复数据反演越流承压含水层参数 总被引：1，自引：0，他引：1
水文地质勘测中,由于水位恢复阶段没有人力和机械因素干扰,由测量数据可以画出平滑的曲线,更适宜于分析水文地质参数,但经典非稳定流Theis公式和Theis水位恢复法所依据的若干假设条件在实际中难以满足。针对越流承压含水层具有补给条件而很快稳定以及非稳定抽水阶段流量常“抖动”的特点,论证了利用稳定流量和Hantush-Jacob越流模型计算的可行性,并用扩展的卡尔曼滤波器反演水文地质参数,经文献中历史数据和实地抽水试验检验结果表明,由该方法反演的预测值和实测值吻合良好。 相似文献
16.
Jiang Li 《Hydrogeology Journal》2007,15(3):445-458
Three aspects of radial motion of an aquifer solid matrix, driven by hydraulic forces due to well recharge and discharge, have been investigated mathematically. Firstly, the analytic solutions in the velocity and displacement fields were found using the definition of bulk mass flow, conservation of water and solid mass, the Darcy-Gersevanov law, and the drawdown of hydraulic head for unsteady flow. Secondly, the radial velocity and displacement of aquifer solid matrix were investigated with respect to time and location in response to three pumping-injection schemes (i.e., linear, nonlinear, and sinusoidal well flow rates). Aquifer movement was found to be more responsive to linear and nonlinear pumping rates than to constant pumpage. Aquifer movement in response to periodic well discharge and recharge was governed by an integral sinusoidal function. Finally, the potential risk of earth fissuring at a given location caused by tensile stress, in turn induced by well discharge-recharge activity, has been discussed using the analytic solution. The deformation compression and extension zones derived from analysis of the results indicated the possible occurrence of tensile stress that may cause earth fissures. Sample computations, using assumed parameters, provided a first-hand evaluation of the location of potential fissuring in relation to the well. 相似文献
17.
In order to assess the groundwater potentiality and augmentation of water supply schemes, estimation of the safe yield, well loss, formation loss, horse power of pump, depth of pump installation and duration of the pumping are essential. These parameters are estimated either by means of in-situ test or laboratory test. But the applicability of result from the laboratory test has limitations while in-situ tests give real representation of individual well of aquifer. The most common in-situ test is pumping test performed on well, which involves measurement of the fall and rise of water level with respect to time. The changes in water level (drawdown/recovery) and its quality are caused due to pumping of water from the well. Such study was carried out in Salur Mandal, Vizainagaram, Andhra Pradesh, India. 相似文献
18.
抽水试验中,动水位数据采集记录及处理分析对水文地质参数计算具有重要意义。近年来自动水位计被广泛用于抽水试验,通过传感器压强水头变化值获取水位降深。因井管内水流动会产生水头损失,自动水位计安放位置不同会导致获取的井水位降深不同,不同于传统方法测得的井水面降深,对水文地质参数计算将产生一定影响,因此如何合理放置自动水位计以及在参数计算中如何应用其获取的水位降深都亟待开展试验研究。在黑河流域第四系大厚度含水层地区,选择典型单层试验孔和利用分层封隔技术实现的一孔同径多层抽水孔开展试验研究,在动水位以下抽水试验层段上部、中部、下部以及潜水泵上部和下部分别放置自动水位计进行了系统的数据采集分析。结果表明:抽水试验中因井管内水流沿程水头损失及速度水头差异导致不同位置自动水位计获得压强水头变化值不同,本次试验实测到井筒内不同部位井损值;井损值在潜水泵进水口处最大,随距潜水泵距离的增大而减小,为避开井筒内较大水头损失对参数计算的影响,自动水位计宜优选安放在潜水泵上部接近动水位位置;在单孔抽水试验中利用稳定流公式计算水文地质参数时,自动水位计获取水位降深含井损不可忽略,需通过多落程抽水试验数据分析扣除后使用。同时,抽水试验中自动水位计不同位置获取数据的处理分析方法为更好地理解井中水头损失提供了依据。 相似文献
19.
通过采用单位面积河流在单位水头差作用下的渗漏量来表征河流渗漏能力,建立渗流井取水理想模型,分别计算了在不同河流渗漏能力和含水层渗透性能条件下,竖井降深对渗流井出水量的影响。建立渗流井取水非稳定流模型,计算了在前期稳定竖井降深不同条件下,河流断流后渗流井出水量衰减过程及竖井降深发展过程。提出渗流井合理竖井降深应根据河流与地下水是否脱节以及含水层渗透性能,在岸边渗流井中部及一侧各布设一个观测孔,根据观测孔水位进行确定。对于含水层渗透性能较强地区,渗流井竖井降深应使得渗流井范围内地下水位与河流脱节,但高于辐射孔顶面;对于含水层渗透性能较差地区,渗流井竖井降深应使得侧部观测孔水位接近河床底面或刚出现脱节。 相似文献
20.
Mazda Kompani-Zare Nozar Samani Siavash Behrooz-Koohenjani 《Hydrogeology Journal》2009,17(5):1175-1187
Large diameter fully cased wells that gain water from the bottom are often dug in sandy and collapsible aquifers. They have cylindrical vertical walls lined with brick or concrete. The well bottom is partially filled with aquifer material through which the flow is vertically upward. When the vertical hydraulic gradient reaches a critical value, quicksand occurs and the well structure can be destroyed. Another difficulty encountered is drawdown in the wellbore and the drying up of the well. To overcome these problems, the flow around and beneath these wells is numerically simulated. The simulation results are used to investigate the effect of well and aquifer parameters on quicksand and drawdown. For practical purposes, the dimensionless drawdown-time and dimensionless vertical gradient-time curves are developed. It was found that the ratio of filling material thickness to well radius affects the shape of these type curves. The type curves may be used to predict the time after pumping commences when quicksand occurs and the well dries up. They are also useful to design the safe pumping rate and duration as well as the optimum well radius. These are demonstrated by analyzing the pumping test data from a case study in the arid Chah Kutah region, southern Iran. 相似文献