共查询到20条相似文献，搜索用时 56 毫秒
1.
根据克拉2气田现今实测地层压力分析了异常高压发育的特征,并通过流体包裹体测试求取包裹体形成时期的古压力。计算结果表明:下白垩统和古近系库姆格列木群砂岩储层在距今8～6Ma(康村组沉积期末)时,古压力系数大致为1.09～1.18,发育过剩压力为4.6～9.6MPa的异常高压。在此基础上,以古、今压力数据为约束条件,利用数值模拟技术定量恢复出下白垩统与侏罗系异常流体压力的演化历史。研究发现:下白垩统储层流体压力经历了沉积型异常流体压力形成发展(白垩纪-库车组沉积期末)和沉积型异常流体压力萎缩—构造挤压型异常流体压力孕育(库车组沉积期末至今)两个阶段。康村组沉积早期沉积型超压开始出现,库车组沉积期末达到顶峰,过剩压力达40～50MPa;此后,在沉积型超压萎缩—构造挤压型超压孕育过程的耦合下,过剩压力曾降至25～30MPa,更新世起超压略有升高。侏罗系流体压力演化较为简单,吉迪克组沉积期开始出现超压,至库车组沉积期末达到高峰,此后异常高压逐渐萎缩。在克拉2气田的主要成藏时期(距今3～1Ma),烃源岩较储层具有更高的异常压力,源—储压力差为10～30MPa。 相似文献
2.
对川东北地区各种超压潜在成因的系统分析结果表明,欠压实作用不是异常高压成因,现今异常高压主要由天然气的充注增压(充气作用)和中燕山—喜山期的强烈构造挤压形成。利用SRK实际气体状态方程对元坝、通南巴气田充气增压贡献进行了计算:元坝气田天然气的充注增压平均为25.21MPa,平均增压幅度60.86%;通南巴气田天然气的充注增压平均为45.81 MPa,平均增压幅度72.04%。其余主要为构造挤压增压,增压幅度在元坝、通南巴气田分别为39.14%和27.96%。中燕山—喜山期构造挤压活动强度的差异控制了应力释放区的分布和储层抬升降温降压的幅度,从而控制了现今压力场平面分布特征。通南巴地区由于晚期强烈的构造挤压活动,使其现今正处于应力充分释放的泄压区,充气增压、构造挤压之后降压过程的发生是其现今超压强度较低的主要原因。 相似文献
3.
石柱复向斜地区建深1井志留系地层钻遇超压, 压力系数为1.75~2.00, 且全层段含气.地层中超压形成和保存与盖层封闭的有效性密切相关.在对超压层段泥岩压实特征以及埋藏史、热史、生烃史研究的基础上分析欠压实、生烃、构造挤压及其他增压机制在志留系超压形成所起的作用, 其中早三叠世至侏罗纪末期干酪根和液态烃裂解生气作用引起的流体体积膨胀是本区超压形成的主控因素, 生气作用终止后无重要的增压事件发生.早白垩世以来的构造抬升作用导致大量溶解态天然气从地层水中出溶, 并聚集于孔喉半径较大的粉砂岩层中.志留系顶部超压顶封层中泥岩和粉砂岩频繁出现互层, 因而形成多个含气粉砂岩薄层.垂向上各个气水界面的毛细管作用力具有可叠加性, 增强了顶封层对超压的封闭能力, 使本区志留系地层中的超压保存至今. 相似文献
4.
石柱复向斜地区建深1井志留系地层钻遇超压,压力系数为1.75~2.00,且全层段含气.地层中超压形成和保存与盖层封闭的有效性密切相关.在对超压层段泥岩压实特征以及埋藏史、热史、生烃史研究的基础上分析欠压实、生烃、构造挤压及其他增压机制在志留系超压形成所起的作用,其中早三叠世至侏罗纪末期干酪根和液态烃裂解生气作用引起的流体体积膨胀是本区超压形成的主控因素,生气作用终止后无重要的增压事件发生.早白垩世以来的构造抬升作用导致大量溶解态天然气从地层水中出溶,并聚集于孔喉半径较大的粉砂岩层中.志留系顶部超压顶封层中泥岩和粉砂岩频繁出现互层,因而形成多个含气粉砂岩薄层.垂向上各个气水界面的毛细管作用力具有可叠加性,增强了顶封层对超压的封闭能力,使本区志留系地层中的超压保存至今. 相似文献
5.
柴达木盆地西北(以下简称“柴西北区”)古近系-新近系异常超压普遍存在。对超压的空间分布特征和形成机制的研究是评价该地区油气成藏条件与资源潜力的关键。依据柴西北区钻井实测压力数据及基于等效深度法计算的地层压力结果,对研究区异常高压的平面和剖面分布特征进行分析。在此基础上,结合柴西北区典型钻井泥岩声波时差曲线特征、不同时期沉积速率、各地层岩性特征、有机质生烃潜力及柴西北地区遭受的构造挤压作用,对研究区超压的形成机制进行分析,并对各控制要素在超压形成过程中的贡献进行定量评价。研究结果表明：柴西北区地层超压起始深度位于大约1 500 m,主要发育在古始新统路乐河组-中新统上干柴沟组内,总体上异常高压随深度加深逐渐增大。研究区超压的形成是多种因素综合作用的结果,其中欠压实作用、有机质生烃和构造挤压作用是该区超压形成演化的重要原因。对控制超压形成的各要素定量评价结果显示：欠压实作用是柴西北区超压形成的最重要控制因素,其贡献率高达60%;构造挤压作用次之,其贡献率在20%～30%左右;有机质生烃演化作用对超压形成也有影响,但贡献率相对较小。此外对柴西北区咸湖环境下的盐度分布特征研究初步表明,地层孔隙流体盐度和咸水半咸水环境下沉积的含盐塑性地层对超压的形成和保存也有一定的影响。 相似文献
6.
库车油气系统北带在第三系盐－膏质区域盖层之下已经发现了6个孔隙流体超压的大小、中型气田,其主要产层的压力系数多在1．8－2．0之间。通过对他们的地质特征,分布特点和地应力环境分析,及与系统南带各油气田和北带第三系盐－膏质区域盖层之上油田对比研究认为：在第三系盐－膏质区域盖层之下封闭体系中高速充填－强烈压实和剧烈构造挤压是克拉2等气田孔隙流体超压的根本原因;由二诱发的深部岩系中（包括气源岩在内）更高的超压流体不断注入是主要储层超压生成的物理机制;生烃过程中产生的相变膨胀压力、构造挤压引发的抬升也会对气层超压的形成有一定的影响。 相似文献
7.
在前陆盆地形成过程中,强烈挤压构造应力场和特殊的盆-山关系造成极为复杂的沉积环境和构造形变,多种地质作用都可能对地层内异常流体压力的产生及演化起到十分重要的作用。通过对准噶尔盆地南缘地区中段的地质条件及压力分布的分析,利用数值盆地模型方法,模拟分析了在前陆盆地构造挤压和盆地沉降过程中压实作用、断裂开启、褶皱、剥蚀等地质过程对流体压力的作用和影响,定量讨论了压力异常的成因机制及其效率。模拟分析结果表明,构造应力在水平方向上派生的侧向压实作用、强烈的褶皱作用及伴随的快速沉积-剥蚀作用等是前陆盆地中特有的增压作用,都可造成较高压力异常。准噶尔盆地南缘中新生界地层中广泛分布的高异常压力是新生代以来,特别是第四纪以来,在快速的压实作用、构造挤压作用所形成的高地层压力背景下,叠加了近期因断裂活动和背斜构造快速形成所引起的他源高压而形成的。 相似文献
8.
鄂尔多斯盆地上古生界低压异常研究中应注意的几个问题 总被引：1，自引：3，他引：1
通过对鄂尔多斯盆地上古生界砂泥岩压实特征、压力成因的研究,结合上古生界不同岩性的组合关系分析,认为上古生界非烃源岩与烃源岩、砂岩和泥岩的地层压力成因有明显区别。非烃源岩系统泥岩的异常高压主要由“非均衡压实”作用产生;而生气作用是烃源岩增压的关键因素,同时也是上古生界天然气运移、成藏的主要动力源;砂岩与泥岩弹塑性有明显差别,构造抬升剥蚀成为砂岩降压的主要机理,而对泥岩影响有限,石千峰-上石盒子组非烃源岩目前仍具明显非均衡压实特征,多处于高压异常,而储层表现为低—正常压力,目前上古生界为一个高低压相间共存的复杂压力系统。上古生界压力的形成与演化历史表明,对于上古生界用流体势的高低来研究互不连通砂体之间的区域运移可能并不适宜。利用Berg临界烃类柱高度的公式计算,上古生界储层能引起天然气运移需要的最小连续气柱高度在22.07 m～67.36 m,远大于砂岩的单层厚度(5 m～15 m)。从天然气的生产能力、天然气聚集、成藏角度分析,山2段毛管中值压力平均值小于6.21MPa、砂岩厚度大于4 m以上的优质储层,才具有聚集、成藏和产出天然气能力,而排驱压力大、孔隙结构差、厚度小的砂岩,由于成藏动力小于成藏阻力,难于形成具规模的气层。 相似文献
9.
异常压力与油气分布 总被引：123，自引：2，他引：123
随着油气勘探活动的不断加深，国内外相继发现了许多异常高压油气田。据不完全统计，全世界已发现超压盆地１８０多个，其中１６０多个为富含油气盆地。异常高压油气田约占全球油气田３０％左右，因此，对异常压力的研究，具有举足轻重的意义。本文介绍了异常地层压力的概念、特征及分类；详细论述了异常压力的成因，即烃类生成作用、欠压实作用、液态烃类的裂解作用、粘土矿物的后生成岩作用、构造作用、温度变化等；系统阐述了世界典型含油气盆地的超压形成机制、超压体系中油气初次运移机理以及超压与油气分布关系；并在此基础上，归纳总结出了五种超压油气藏成藏模式，即：（１）位于超压体系中的低渗超压油气藏；（２）位于超压层系中，以礁灰岩（或浊积砂岩）为储层的高压油气藏；（３）位于超压带上倾方向，以退覆三角洲平原和分流河道砂岩为储层的常压或过渡带超压油气藏；（４）位于超压带上、下部的超压油气藏；（５）位于远离超压体系的泄压区常压油气藏，本文对指导、加深新老油气区勘探具有实际应用价值。 相似文献
10.
11.
S. Viswanathan K. Surya Prakash Rao B. Mahabaleswar 《Journal of the Geological Society of India》2013,82(6):621-627
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours. 相似文献
12.
E. M. Prasolov S. A. Sergeev B. V. Belyatsky E. S. Bogomolov K. A. Gruzdov I. N. Kapitonov R. Sh. Krymsky V. O. Khalenev 《Geochemistry International》2018,56(1):46-64
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others. 相似文献
13.
14.
奥地利安东帕有限公司 《岩矿测试》2009,28(3):306-306
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提 相似文献
15.
16.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance. 相似文献
17.
Alexander E. C. Broberg J. S. Kehren A. R. Graziani M. M. Turri W. L. 《Environmental Geology》1993,22(4):353-361
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes. 相似文献
18.
岩石密度和超高压岩石折返速率 总被引：1，自引：3，他引：1
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。 相似文献
19.
20.
滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床. 相似文献