共查询到20条相似文献，搜索用时 515 毫秒
1.
塔中地区主要受塔中Ⅰ号、Ⅱ号及Ⅲ号三条大断层控制,形成巨型复式背斜,隆起高部位地层遭受了强烈的风化剥蚀.背斜之上,断裂和局部构造发育.可划分出两个主要成藏期:第Ⅰ成藏期为寒武系-下奥陶统烃源岩成熟生烃运移期,生排烃高峰为志留纪;第Ⅱ成藏期为中-上奥陶统烃源岩在燕山期-喜马拉雅期成熟生烃运聚.第Ⅰ成藏期形成的油藏有两个特征:在塔中Ⅰ号断裂带、北部斜坡带油气注入奥陶系及志留系圈闭中,形成原生油气藏;构造高部位(如中央断垒带)的油气藏在后期构造运动中遭受破坏.第Ⅱ成藏期形成的油藏可分为两类:对早期油藏的再次充注;聚集形成新油藏.塔中地区的油气运移通道主要有断裂和不整合面,油气的分布也主要受断裂和不整合面所控制.塔中Ⅰ号构造带和北部斜坡带是较为有利的勘探区带. 相似文献
2.
塔中地区主要受塔中Ⅰ号、Ⅱ号及Ⅲ号三条大断层控制 ,形成巨型复式背斜 ,隆起高部位地层遭受了强烈的风化剥蚀。背斜之上 ,断裂和局部构造发育。可划分出两个主要成藏期 :第Ⅰ成藏期为寒武系—下奥陶统烃源岩成熟生烃运移期 ,生排烃高峰为志留纪 ;第Ⅱ成藏期为中—上奥陶统烃源岩在燕山期—喜马拉雅期成熟生烃运聚。第Ⅰ成藏期形成的油藏有两个特征 :在塔中Ⅰ号断裂带、北部斜坡带油气注入奥陶系及志留系圈闭中 ,形成原生油气藏 ;构造高部位 (如中央断垒带 )的油气藏在后期构造运动中遭受破坏。第Ⅱ成藏期形成的油藏可分为两类 :对早期油藏的再次充注 ;聚集形成新油藏。塔中地区的油气运移通道主要有断裂和不整合面 ,油气的分布也主要受断裂和不整合面所控制。塔中Ⅰ号构造带和北部斜坡带是较为有利的勘探区带 相似文献
3.
塔中地区油气运聚特征 总被引：7，自引：1，他引：7
塔中地区主要受塔中Ⅰ号、Ⅱ号及Ⅲ号三条大断层控制，形成巨型复式背斜，隆起高部位地层遭受了强烈的风化剥蚀。背斜之上，断裂和局部构造发育。可划分出两个主要成藏期：第1成藏期为寒武系—下奥陶统烃源岩成熟生烃运移期，生排烃高峰为志留纪；第Ⅱ成藏期为中—上奥陶统烃源岩在燕山期—喜马拉雅期成熟生烃运聚。第1成藏期形成的油藏有两个特征；在塔中Ⅰ号断裂带、北部斜坡带油气注入奥陶系及志留系圈闭中，形成原生油气藏Ⅰ构造高部位(如中央断垒带)的油气藏在后期构造运动中遭受破坏。第Ⅱ成藏期形成的油藏可分为两类：对早期油藏的再次充注；聚集形成新油藏。塔中地区的油气运移通道主要有断裂和不整合面，油气的分布也主要受断裂和不整合面所控制。塔中Ⅰ号构造带和北部斜坡带是较为有利的勘探区带。 相似文献
4.
塔中Ⅰ号断裂构造带奥陶系碳酸盐岩圈闭类型及其勘探意义 总被引：15，自引：0，他引：15
塔中Ⅰ号断裂构造带奥陶系碳酸盐岩油气聚集在一定程度上受到了中-上奥陶统灰岩顶面构造形态的控制,而油气层或显示层段分布范围、发育位置不完全受构造圈闭控制;中-上奥陶统圈闭发育多种类型,有成岩型圈闭、礁型圈闭和受构造作用控制的成岩型圈闭.丰富的圈闭类型和储层特征表明塔中Ⅰ号断裂构造油气聚集带具有多种建设性储层改造因素存在,该带同时又是一个有利的油气聚集区带,具有很大的勘探潜力;圈闭类型丰富也暗示该带油气藏勘探的复杂性和困难性. 相似文献
5.
塔中北斜坡富油气区油气分布规律与富集主控因素研究 总被引：2，自引：0，他引：2
塔里木盆地塔中北斜坡奥陶系油气藏类型多样、油气性质变化大、油气水分布复杂。通过对塔中北斜坡大量单井及其生产动态的分析解剖,结合分析化验资料,深入探讨了富油气区的流体分布特征、断裂发育特征、储层差异性以及典型高产井和出水井的对比,揭示了油气分布规律与控制因素。鹰山组顶部的风化壳型不整合面在垂向上控制了储层的发育深度范围和储层质量;平面上储层的非均质性是导致油气分布差异的重要原因。断裂引起的局部高差对流体聚集存在明显影响,使断裂上盘高部位更倾向于富油气,并发现断裂对储层改造强烈,特别是走滑断裂作为油气运移通道对油气分布具有重要的控制作用,决定了不同区域的古油藏在晚喜山期遭受气侵的强度,控制了不同相态油气藏的分布;奥陶系鹰山组上部发育的致密段对古油藏的保存具有积极的作用。该认识对相似地区碳酸盐岩油气富集规律研究及勘探开发具重要的参考价值。 相似文献
6.
塔里木盆地塔中礁滩体大油气田成藏条件与成藏机制研究 总被引：4，自引：6，他引：4
中国海相碳酸盐岩油气勘探近年来进展很快,发现了一批大型油气田。塔中地区是塔里木盆地的重点勘探区和富油气区,奥陶系蕴藏了丰富的油气资源。奥陶系良里塔格组受塔中I号坡折带的控制发育陆棚边缘礁滩体,储层性质为低孔-特低孔、低渗灰岩储层,埋深在4500~6500m。储层的形成和分布受早期高能沉积相带、溶蚀作用和断裂作用等因素的控制,有效储层的空间展布控制了油气的分布与大面积成藏。油源对比认为,塔中良里塔格组礁滩体油气藏的原油主要来自于中上奥陶统烃源岩,并混有寒武系烃源岩成因的原油;天然气主要来自于寒武系油裂解气,沿塔中I号坡折带断裂向内充注。成藏过程分析表明,塔中地区曾存在三期主要成藏期,第一期为加里东晚期成藏,油气来自于寒武系-下奥陶统烃源岩,但早海西期的构造运动,对该期油气破坏严重,造成大范围油藏破坏。第二期成藏期是晚海西期,也是塔中地区最重要的油气充成藏期,油气来自于中上奥陶统烃源岩。第三期成藏期是晚喜山期,受库车前陆冲断影响,台盆区快速沉降,埋深急速增大,寒武系原油裂解气形成,沿深部断裂向浅部奥陶系充注,对油藏进行气洗改造,从而形成大面积分布的凝析气藏。 相似文献
7.
胜利海上埕岛油田下古生界潜山高产因素分析 总被引：1，自引：0，他引：1
埕岛油田是我国浅海－极海海域发现的第一个大型整流油气田,四周环凹,油源条件十分优越,全区可划分为西排山,中排山,东排山三个潜山带构造单元,油气运移通道主要是断裂和风化壳不整合面,区域盖层发育良好,储集条件是油气富集高产控制因素,纵向上潜山带储层主要集中在潜山的风化壳;平面上主要沿断层分布,沿断层发育的奥陶系在潜山是本区古生办潜山勘探的最有利目标。 相似文献
8.
9.
南堡凹陷已发现的油气储量分布具不均衡性。平面上,石油主要分布在南堡1号、2号和高尚堡构造带,天然气主要分布在南堡1、2、5号构造带。纵向上,油气主要分布在源上组合,源内和源下组合的油气储量相对较少。依据油气成藏要素的综合分析,确定了南堡凹陷油气分布主控因素：（1）烃源岩控制了油气的分布范围,已发现的80％以上的油气藏分布在距排烃中心15 km以内;（2）有利的沉积相带控制了沉积砂体,进而控制了油气的分布层位,目前已发现的油气储量主要分布在三角洲、河流沉积体系内;（3）断裂一方面控制了圈闭的类型和空间展布,进而控制油气藏的规模和位置,另一方面,断层作为油气纵向运移的通道,控制了油气纵向运移距离,已发现的油气藏90％以上分布在断裂带附近。综合而言,南堡凹陷油气分布受烃源岩、沉积相和断裂的多重控制。 相似文献
10.
塔里木盆地塔中地区奥陶系碳酸盐岩地层内发育大量的走滑断裂,是碳酸盐岩孔洞型储层发育及油气聚集的重要控制因素。走滑断裂在剖面上表现为花状特征,在平面上表现为线状、花状、辫状、马尾状等多种组合样式的特征,其形成的走滑断裂带在横向上具有分区特征,不同区内走滑断裂的组合样式及应力特征也各不相同。这些特征造成了碳酸盐岩孔洞型储层发育的差异性,以及孔洞型油气藏油气富集程度的差异性。通过对研究区内断裂进行精细的解剖,明确了塔中中古8井区走滑断裂的基本特征,以及走滑断裂对孔洞型储层、油气藏的控制作用,对塔中孔洞型油气藏的勘探和开发具有一定的参考意义。 相似文献
11.
S. Viswanathan K. Surya Prakash Rao B. Mahabaleswar 《Journal of the Geological Society of India》2013,82(6):621-627
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours. 相似文献
12.
E. M. Prasolov S. A. Sergeev B. V. Belyatsky E. S. Bogomolov K. A. Gruzdov I. N. Kapitonov R. Sh. Krymsky V. O. Khalenev 《Geochemistry International》2018,56(1):46-64
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others. 相似文献
13.
14.
奥地利安东帕有限公司 《岩矿测试》2009,28(3):306-306
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提 相似文献
15.
16.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance. 相似文献
17.
Alexander E. C. Broberg J. S. Kehren A. R. Graziani M. M. Turri W. L. 《Environmental Geology》1993,22(4):353-361
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes. 相似文献
18.
岩石密度和超高压岩石折返速率 总被引：1，自引：3，他引：1
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。 相似文献
19.
20.
Mercury,arsenic, antimony,and selenium contents of sediment from the Kuskokwim River,Bethel, Alaska,USA 总被引：1，自引：0，他引：1
The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources. 相似文献