共查询到20条相似文献，搜索用时 31 毫秒
1.
This study compares kinetic parameters determined by open-system pyrolysis and hydrous pyrolysis using aliquots of source rocks containing different kerogen types. Kinetic parameters derived from these two pyrolysis methods not only differ in the conditions employed and products generated, but also in the derivation of the kinetic parameters (i.e., isothermal linear regression and non-isothermal nonlinear regression). Results of this comparative study show that there is no correlation between kinetic parameters derived from hydrous pyrolysis and open-system pyrolysis. Hydrous-pyrolysis kinetic parameters determine narrow oil windows that occur over a wide range of temperatures and depths depending in part on the organic-sulfur content of the original kerogen. Conversely, open-system kinetic parameters determine broad oil windows that show no significant differences with kerogen types or their organic-sulfur contents. Comparisons of the kinetic parameters in a hypothetical thermal-burial history (2.5 °C/my) show open-system kinetic parameters significantly underestimate the extent and timing of oil generation for Type-IIS kerogen and significantly overestimate the extent and timing of petroleum formation for Type-I kerogen compared to hydrous pyrolysis kinetic parameters. These hypothetical differences determined by the kinetic parameters are supported by natural thermal-burial histories for the Naokelekan source rock (Type-IIS kerogen) in the Zagros basin of Iraq and for the Green River Formation (Type-I kerogen) in the Uinta basin of Utah. Differences in extent and timing of oil generation determined by open-system pyrolysis and hydrous pyrolysis can be attributed to the former not adequately simulating natural oil generation conditions, products, and mechanisms. 相似文献
2.
Long-chain fatty acids (C10-C32), as well as C14-C21 isoprenoid acids (except for C18), have been identified in anhydrous and hydrous pyrolyses products of Green River kerogen (200–400°C, 2–1000 hr). These kerogen-released fatty acids are characterized by a strong even/odd predominance (CPI: 4.8-10.2) with a maximum at C16 followed by lesser amounts of C18 and C22 acids. This distribution is different from that of unbound and bound geolipids extracted from Green River shale. The unbound fatty acids show a weak even/odd predominance (CPI: 1.64) with a maximum at C14, and bound fatty acids display an even/odd predominance (CPI: 2.8) with maxima at C18 and C30. These results suggest that fatty acids were incorporated into kerogen during sedimentation and early diagenesis and were protected from microbial and chemical changes over geological periods of time. Total quantities of fatty acids produced during heating of the kerogen ranged from 0.71 to 3.2 mg/g kerogen. Highest concentrations were obtained when kerogen was heated with water for 100 hr at 300°C. Generally, their amounts did not decrease under hydrous conditions with increase in temperature or heating time, suggesting that significant decarboxylation did not occur under the pyrolysis conditions used, although hydrocarbons were extensively generated. 相似文献
3.
A maturity indexing procedure based on the isotopic difference between the total accumulated methane produced by exhaustive pyrolysis and the kerogen (Δ13C) and the mole ratio of methane to kerogen carbon (CMR), has been tested by applying a standardized technique, i.e. exhaustive pyrolysis (600°C for 120 hr) of extracted-powdered samples and measurement of the amounts and isotopic composition of the methane and kerogen carbon, on a suite of 15 Bakken shale samples.A linear relation was found between the carbon mole ratio of pyrolysis-derived methane and total organic carbon and the δ13C difference between the pyrolysis-derived methane and total organic carbon (r = −0.79); and between the amount of CH4 generated from exhaustive pyrolysis and H/C atomic ratios (r = +0.91). 相似文献
4.
Immature Torbanite and the resistant biopolymer (PRB A) isolated from extant B. braunii were previously compared using bulk spectroscopic methods. In the present work, analysis of 400°C pyrolysis products and pyrolysis residues provided further information on their structure and possible relationships. It appears that such polymers are based upon unbranched, saturated, cross-linked hydrocarbon chains up to C31. In addition to these bridging structures, a substantial part of the alkyl chains is singly bound, as esters of unbranched, saturated or cis unsaturated, even fatty acids. These esters are sterically protected, against chemical degradations, by the network of the bioand geopolymer.Quantitative and qualitative observations derived from 400°C pyrolysis confirm that the chemical structure of PRB A and immature Torbanite are closely related. The pyrolysis residues show a similar evolution and numerous common features are noted, with respect to the nature and the distribution of the major constituents of the pyrolysates (hydrocarbons and fatty acids). Accordingly, Botryococcus provides what seems to be the first example of a close structural relationship between a biopolymer produced in large amounts by an extant alga and the geopolymer of an immature kerogen. The essential role of PRB A in Torbanite formation is ascertained. Moreover, it is found that the resistant biopolymer does not undergo important structural changes during the first stages of diagenesis. Thus, owing to steric protection, the esters of immature Torbanite show a distribution quite close to the one of PRB A esters, with exclusively even constituents and a large contribution of unsaturated acids.Recent observations pointed to the possible genesis of some algal kerogens principally by selective preservation of resistant macromolecules. Such a type of formation is clearly predominant in Torbanite, where the bulk of the fossil organic matter corresponds to a selectively preserved and weakly altered, resistant biopolymer, while incorporation of lipids into the kerogen structure during diagenesis seems to play a minor role. 相似文献
5.
Production rates and carbon isotopic compositions of various pyrolysis products were investigated for three sediments from the Williston Basin under open and closed pyrolysis conditions in the temperature range of 300–600°C.Both parameters do not show any significant differences for kerogens and carbon dioxides with the analytical procedure. Contrary to open system pyrolysis, however, decreasing yields of pyrolysates and higher amounts of gaseous hydrocarbons (C2–4 compounds) at temperatures of 500 and 600°C, point to their decomposition to give ultimately methane.Moreover, these pyrolysis products display distinct carbon isotopic variations under open and closed pyrolysis conditions. They are due to a kinetic isotope effect, i.e. the preferential cleavage of 12C-12C over 13C-12C bonds, but the extent of the shift in isotopic composition seems to depend primarily on the reservoir size and the type of source material. 相似文献
6.
7.
The distributions of hopanoic acids, ranging from C30 to C34, in the Messel oil shale were characterized in both the free and bound states. The bound acids were released by thermochemolysis in the presence of tetramethylammonium hydroxide (TMAH). These were compared with the distributions of the hopanoic acids and hopanes released or generated from Messel oil shale kerogen following closed system microscale pyrolysis. This comparison revealed that epimerization had occurred at C-17, C-21 and C-22 during heating. It was also clear that the residual bound hopanoic acids had undergone configurational isomerization. During the pyrolysis there is a large loss of hopanoic acids following their rapid release from the kerogen into the free fraction even at 250 °C. In these particular experiments this loss does not appear to result in exclusive formation of hopanes, by way of decarboxylation or reduction reactions, unless the resulting hopanes are either themselves rapidly transformed into other compounds or the reaction rates are a function of the total number of carbon atoms in each hopanoic acid precursor. 相似文献
8.
Anke Putschew Christine Schaeffer-Reiss Philippe Schaeffer Martin P Koopmans Jan W de Leeuw Michael D Lewan Jaap S Sinninghe Damsté James R Maxwell 《Organic Geochemistry》1998,29(8):1875-1890
An immature sulfur-rich marl from the Gessosso-solfifera Formation of the Vena del Gesso Basin (Messinian, Italy) has been subjected to hydrous pyrolysis (160 to 330°C) to simulate maturation under natural conditions. The kerogen of the unheated and heated samples was isolated and the hydrocarbons released by selective chemical degradation (Li/EtNH2 and HI/LiAlH4) were analysed to allow a study of the fate of sulfur- and oxygen-bound species with increasing temperature. The residues from the chemical treatments were also subjected to pyrolysis–GC to follow structural changes in the kerogens. In general, with increasing hydrous pyrolysis temperature, the amounts of sulfide- and ether-bound components in the kerogen decreased significantly. At the temperature at which the generation of expelled oil began (260°C), almost all of the bound components initially present in the unheated sample were released from the kerogen. Comparison with an earlier study of the extractable organic matter using a similar approach and the same samples provides molecular evidence that, with increasing maturation, solvent-soluble macromolecular material was initially released from the kerogen, notably as a result of thermal cleavage of weak carbon–heteroatom bonds (sulfide, ester, ether) even at temperatures as low as 220°C. This solvent-soluble macromolecular material then underwent thermal cleavage to generate hydrocarbons at higher temperatures. This early generation of bitumen may explain the presence of unusually high amounts of extractable organic matter of macromolecular nature in very immature S-rich sediments. 相似文献
9.
A model is proposed for a fragment of the chemical structures of the geopolymers based on elemental analysis and the study
of the composition of the pyrolysis products of kerogen from the Upper Jurassic and Devonian formations in the East European
Platform. The Sorg/C ratio in kerogen from oil shales from J3v2 is 0.4 or higher, and this kerogen belongs to type II-S, while kerogen from the Domanik rocks does not contain S and belongs
to type II. The composition of the pyrolysis products of the Upper Jurassic kerogen testifies to the presence of polysulfur-bound
structures in this geopolymer, whose thermolysis results in disulfuric cyclic compounds. No structures of this type are contained
in Domanik kerogen. Oxygen-bearing groups in J3v2 kerogen are thought to be partly concentrated on simple-ether bonds, whereas D3dm kerogen is likely dominated by compound-ether and carboxyl structures. Nitrogen-bearing structures in kerogen from Upper
Jurassic and Domanik formations are of different genesis: while nitrogen-bearing structures in Jurassic kerogen are mostly
aminoacids, Domanik kerogen contains chitin derivatives. 相似文献
10.
Jaap S. Sinninghe Damst Math E. L. Kohnen Brian Horsfield 《Organic Geochemistry》1998,29(8):1891-1903
Micro-scale sealed vessel (MSSV) pyrolysis experiments have been conducted at temperatures of 150, 200, 250, 300, 330 and 350°C for various times on a thermally immature Type II-S kerogen from the Maastrichtian Jurf ed Darawish Oil Shale (Jordan) in order to study the origin of low-molecular-weight (LMW) alkylthiophenes. These experiments indicated that the LMW alkylthiophenes usually encountered in the flash pyrolysates of sulphur-rich kerogens are also produced at much lower pyrolysis temperatures (i.e. as low as 150°C) as the major (apart from hydrogen sulfide) sulphur-containing pyrolysis products. MSSV pyrolysis of a long-chain alkylthiophene and an alkylbenzene indicated that at 300°C for 72 h no β-cleavage leading to generation of LMW alkylated thiophenes and benzene occurs. In combination with the substantial production of LMW alkylthiophenes with a linear carbon skeleton at these conditions, this indicated that these thiophenes are predominantly formed by thermal degradation of multiple (poly)sulfide-bound linear C5–C7 skeletons, which probably mainly originate from sulphurisation of carbohydrates during early diagenesis. LMW alkylthiophenes with linear carbon skeletons seem to be unstable at MSSV pyrolysis temperatures of ≥330°C either due to thermal degradation or to methyl transfer reactions. LMW alkylthiophenes with a branched carbon skeleton most likely derive from both multiple (poly)sulfide-bound branched C5–C7 skeletons and alkylthiophene units present in the kerogen. 相似文献
11.
V. N. Melenevskii 《Geochemistry International》2012,50(5):425-436
The catagenesis of organic matter (OM) was modeled by the hydrous pyrolysis of a Riphean mudstone. Microscopic observations
of the processes operating during kerogen heating to 600°C were conducted in a diamond anvil cell. The results of pyrolysis
in an aqueous environment were used to calculate the activation energies of kerogen cracking and derive chemical kinetic models
for OM catagenesis. Isothermal experiments were carried out for 3 days at temperatures of 300, 310, …, 360, and 370°C. The
maximum bitumen yield was obtained at 330°C followed by thermal cracking at higher temperatures. The aromatic and saturated
hydrocarbons from rock bitumen, hydrous pyrolyzates, and kerogen flash pyrolyzates were analyzed by chromatography-mass spectrometry.
We also discuss the problem of extrapolation of high-temperature pyrolysis results to geologic observations under the conditions
of regional catagenesis. 相似文献
12.
Kerogen has been artificially matured under “hydrous pyrolysis” conditions in the presence of various minerals in order to investigate the influence of the latter on the organic products. In addition to three clay minerals (montmorillonite, illite, kaolinite), calcium carbonate and limonite were also employed as inorganic substrates. Kerogen (Type II) isolated from the Kimmeridge Blackstone band was heated in the presence of water and a 20-fold excess of mineral phase at two different temperatures (280 and 330°C) for 72 hr. Control experiments were also carried out using kerogen and water only and kerogen under anhydrous conditions. This preliminary study describes the bulk composition of the pyrolysates with detailed analyses of the aliphatic hydrocarbon distributions being provided by gas chromatography and combined gas chromatography-mass spectrometry.In the 280°C experiments, considerably more organic-soluble pyrolysate (15% by weight of original kerogen) was produced when calcium carbonate was the inorganic phase. At 330°C, all samples generated much greater amounts of organic-soluble products with calcium carbonate again producing a large yield (40% wt/wt). Biomarker epimerisation reactions have also proceeded further in the 330°C pyrolysate formed in the presence of calcium carbonate than with other inorganic phases. Implications of these and other observations are discussed. 相似文献
13.
Experiments were carried out on the thermal decomposition of sporopollenin, isolated from a marine algae (Lycopodium clavatum) at constant temperature (380°C) and pressure (around 200 atm), but for varying pyrolysis times.The decomposition products were separated into groups, analysed by chromatography and infra-red spectroscopy, and their elemental composition determined. The thermal evolution of sporopollenin proceeds in three distinct steps: first, a partial decomposition of the initial substance occurs with the formation of soluble materials. This is followed by a full decomposition of the sporopollenin and disappearance of the non-soluble residue. Finally, a non-soluble material reappears. It is proposed that, due to secondary reactions, the evolution of kerogen of the sapropelic type is similar to what has been observed in mild pyrolysis experiments. 相似文献
14.
Hydrous pyrolysis, commonly used for the simulation of liquid hydrocarbon generation, is a potentially useful technique for the study of dissolved organic acid synthesis if modifications to conventional methods are made. Simple experiments demonstrate the thermal origin of formic, acetic, proprionic, and butyric acids. The use of stainless steel reactors at high temperatures ( ca. 300°C), however, results in short chain aliphatic acid yields and distributions that are a function of experimental conditions. Once generated, propionate is destroyed more rapidly than acetate during the experiments. Experimental artifacts can be reduced by using lower temperatures and less catalytically active reactor materials.With present methodology, hydrous pyrolysis provides a useful semi-quantitative method for assessing the organic acid generating capacities of different rocks and organic matter types. As much as 1.2 wt% of the organic C in low thermal rank kerogen can be converted to short chain aliphatic acids. However, carbon dioxide is the dominant oxygen-containing product, exceeding organic acid yields by roughly 10 times. Relative organic acid generating capacities can vary by a factor of two or more in narrow stratigraphic intervals (<3 m). Bulk geochemical parameters, like oxygen indices, and gross organic petrography (organic matter type) only partly explain the observed variations in organic acid yields between samples. 相似文献
15.
Hydrous and anhydrous closed-system pyrolysis experiments were conducted on a sample of Mahogany oil shale (Eocene Green River Formation) containing Type-I kerogen to determine whether the role of water had the same effect on petroleum generation as reported for Type-II kerogen in the Woodford Shale. The experiments were conducted at 330 and 350 °C for 72 h to determine the effects of water during kerogen decomposition to polar-rich bitumen and subsequent bitumen decomposition to hydrocarbon-rich oil. The results showed that the role of water was more significant in bitumen decomposition to oil at 350 °C than in kerogen decomposition to bitumen at 330 °C. At 350 °C, the hydrous experiment generated 29% more total hydrocarbon product and 33% more C15+ hydrocarbons than the anhydrous experiment. This is attributed to water dissolved in the bitumen serving as a source of hydrogen to enhance thermal cracking and facilitate the expulsion of immiscible oil. In the absence of water, cross linking is enhanced in the confines of the rock, resulting in formation of pyrobitumen and molecular hydrogen. These differences are also reflected in the color and texture of the recovered rock. Despite confining liquid-water pressure being 7-9 times greater in the hydrous experiments than the confining vapor pressure in the anhydrous experiments, recovered rock from the former had a lighter color and expansion fractures parallel to the bedding fabric of the rock. The absence of these open tensile fractures in the recovered rock from the anhydrous experiments indicates that water promotes net-volume increase reactions like thermal cracking over net-volume decrease reactions like cross linking, which results in pyrobitumen. The results indicate the role of water in hydrocarbon and petroleum formation from Type-I kerogen is significant, as reported for Type-II kerogen. 相似文献
16.
Robert F Dias Katherine H FreemanMichael D Lewan Stephen G Franks 《Geochimica et cosmochimica acta》2002,66(15):2755-2769
Low-molecular-weight (LMW) aqueous organic acids were generated from six oil-prone source rocks under hydrous-pyrolysis conditions. Differences in total organic carbon-normalized acid generation are a function of the initial thermal maturity of the source rock and the oxygen content of the kerogen (OI). Carbon-isotope analyses were used to identify potential generation mechanisms and other chemical reactions that might influence the occurrence of LMW organic acids. The generated LMW acids display increasing 13C content as a function of decreasing molecular weight and increasing thermal maturity. The magnitudes of observed isotope fractionations are source-rock dependent. These data are consistent with δ13C values of organic acids presented in a field study of the San Joaquin Basin and likely reflect the contributions from alkyl-carbons and carboxyl-carbons with distinct δ13C values. The data do not support any particular organic acid generation mechanism. The isotopic trends observed as a function of molecular weight, thermal maturity, and rock type are not supported by either generation mechanisms or destructive decarboxylation. It is therefore proposed that organic acids experience isotopic fractionation during generation consistent with a primary kinetic isotope effect and subsequently undergo an exchange reaction between the carboxyl carbon and dissolved inorganic carbon that significantly influences the carbon isotope composition observed for the entire molecule. Although generation and decarboxylation may influence the δ13C values of organic acids, in the hydrous pyrolysis system described, the nondestructive, pH-dependent exchange of carboxyl carbon with inorganic carbon appears to be the most important reaction mechanism controlling the δ13C values of the organic acids. 相似文献
17.
Temenuzhka Budinova Maria Razvigorova Bilyana Petrova M. Ferhat Yardim 《Chemie der Erde / Geochemistry》2009,69(3):235-245
A 13-step alkaline permanganate degradation of Bulgarian oil shale kerogen concentrate at ambient temperature was carried out. A high yield of oxidation products (90.1%) and a low yield of gaseous products (2.79%) were obtained. IR and 1H NMR spectroscopic studies have shown that two significantly different types of high molecular products are present in kerogen. Further oxidation of these structures leads to the formation of low molecular aliphatic and aromatic acids, proven by gas chromotography (GC) and gas chromatography-mass spectrometry (GC-MS). The data obtained at these mild conditions allow us to acquire detailed information about the aromatic structures and polymethylene chain lengths in kerogen.The 5-step oxidation of the kerogen at 90 °C provides information about stable aromatic structures. Soluble and insoluble polyfunctional acids in acid medium have close molecular masses and spectral characteristics. The amount of benzene and naphthalene carboxylic acids is 11.3% of the organic matter of the oil shale. 相似文献
18.
The Menilite Shales (Oligocene) of the Polish Carpathians are the source of low-sulfur oils in the thrust belt and some high-sulfur oils in the Carpathian Foredeep. These oil occurrences indicate that the high-sulfur oils in the Foredeep were generated and expelled before major thrusting and the low-sulfur oils in the thrust belt were generated and expelled during or after major thrusting. Two distinct organic facies have been observed in the Menilite Shales. One organic facies has a high clastic sediment input and contains Type-II kerogen. The other organic facies has a lower clastic sediment input and contains Type-IIS kerogen. Representative samples of both organic facies were used to determine kinetic parameters for immiscible oil generation by isothermal hydrous pyrolysis and S2 generation by non-isothermal open-system pyrolysis. The derived kinetic parameters showed that timing of S2 generation was not as different between the Type-IIS and -II kerogen based on open-system pyrolysis as compared with immiscible oil generation based on hydrous pyrolysis. Applying these kinetic parameters to a burial history in the Skole unit showed that some expelled oil would have been generated from the organic facies with Type-IIS kerogen before major thrusting with the hydrous-pyrolysis kinetic parameters but not with the open-system pyrolysis kinetic parameters. The inability of open-system pyrolysis to determine earlier petroleum generation from Type-IIS kerogen is attributed to the large polar-rich bitumen component in S2 generation, rapid loss of sulfur free-radical initiators in the open system, and diminished radical selectivity and rate constant differences at higher temperatures. Hydrous-pyrolysis kinetic parameters are determined in the presence of water at lower temperatures in a closed system, which allows differentiation of bitumen and oil generation, interaction of free-radical initiators, greater radical selectivity, and more distinguishable rate constants as would occur during natural maturation. Kinetic parameters derived from hydrous pyrolysis show good correlations with one another (compensation effect) and kerogen organic-sulfur contents. These correlations allow for indirect determination of hydrous-pyrolysis kinetic parameters on the basis of the organic-sulfur mole fraction of an immature Type-II or -IIS kerogen. 相似文献
19.
Eric Lehne Volker Dieckmann Rolando di Primio Andreas Fuhrmann Brian Horsfield 《Organic Geochemistry》2009,40(5):604-616
Asphaltenes extracted from crude oils are proposed to possess structural features of the related source rock kerogen. For the present study micro-scale sealed vessel pyrolysis (MSSV) and combustion isotope ratio mass spectrometry (GC–C–IRMS) were used to compare gas generation from a whole rock (type II-S kerogen) from southern Italy with that from related sulfur rich asphaltenes isolated from a low maturity heavy crude oil. The purpose of was to determine whether experimental pyrolysis of oil asphaltenes can be used to predict the timing and the chemical and isotopic composition of hydrocarbon gases generated from genetically related kerogen in the source rock during burial maturation. The results show that parameters such as (gas to oil ratio) GOR and oil and gas formation timing are very similar for these two sample types, whereas gas composition, product aromaticity and sulfur content are remarkably different. Slight differences in GOR are mainly due to differences in gas formation characteristics at very high levels of thermal alteration. Secondary gas formation from the whole rock covers a much broader temperature range under geological conditions than that from the asphaltene products. However, it is remarkable that both the onset and the maximum temperature are nearly identical under geological conditions. The observed differences in gas generation characteristics are supported by discrepancies in the carbon isotopic characteristics of the gas range compounds and indicate different precursors and/or mechanisms for gas generated from whole rock and asphaltenes. 相似文献
20.
This study examined the molecular and isotopic compositions of gases generated from different kerogen types (i.e., Types I/II, II, IIS and III) in Menilite Shales by sequential hydrous pyrolysis experiments. The experiments were designed to simulate gas generation from source rocks at pre-oil-cracking thermal maturities. Initially, rock samples were heated in the presence of liquid water at 330 °C for 72 h to simulate early gas generation dominated by the overall reaction of kerogen decomposition to bitumen. Generated gas and oil were quantitatively collected at the completion of the experiments and the reactor with its rock and water was resealed and heated at 355 °C for 72 h. This condition simulates late petroleum generation in which the dominant overall reaction is bitumen decomposition to oil. This final heating equates to a cumulative thermal maturity of 1.6% Rr, which represents pre-oil-cracking conditions. In addition to the generated gases from these two experiments being characterized individually, they are also summed to characterize a cumulative gas product. These results are compared with natural gases produced from sandstone reservoirs within or directly overlying the Menilite Shales. The experimentally generated gases show no molecular compositions that are distinct for the different kerogen types, but on a total organic carbon (TOC) basis, oil prone kerogens (i.e., Types I/II, II and IIS) generate more hydrocarbon gas than gas prone Type III kerogen. Although the proportionality of methane to ethane in the experimental gases is lower than that observed in the natural gases, the proportionality of ethane to propane and i-butane to n-butane are similar to those observed for the natural gases. δ13C values of the experimentally generated methane, ethane and propane show distinctions among the kerogen types. This distinction is related to the δ13C of the original kerogen, with 13C enriched kerogen generating more 13C enriched hydrocarbon gases than kerogen less enriched in 13C. The typically assumed linear trend for δ13C of methane, ethane and propane versus their reciprocal carbon number for a single sourced natural gas is not observed in the experimental gases. Instead, the so-called “dogleg” trend, exemplified by relatively 13C depleted methane and enriched propane as compared to ethane, is observed for all the kerogen types and at both experimental conditions. Three of the natural gases from the same thrust unit had similar “dogleg” trends indicative of Menilite source rocks with Type III kerogen. These natural gases also contained varying amounts of a microbial gas component that was approximated using the Δδ13C for methane and propane determined from the experiments. These approximations gave microbial methane components that ranged from 13–84%. The high input of microbial gas was reflected in the higher gas:oil ratios for Outer Carpathian production (115–1568 Nm3/t) compared with those determined from the experiments (65–302 Nm3/t). Two natural gas samples in the far western part of the study area had more linear trends that suggest a different organic facies of the Menilite Shales or a completely different source. This situation emphasizes the importance of conducting hydrous pyrolysis on samples representing the complete stratigraphic and lateral extent of potential source rocks in determining specific genetic gas correlations. 相似文献