共查询到20条相似文献，搜索用时 296 毫秒
1.
粤西河台金矿区位于钦州湾—杭州湾（钦—杭）结合带南段的云开地区,是典型的受韧性剪切带控制的金矿。然而,对于剪切带中有利于金成矿的地质环境及其成矿过程仍然存在争议。本文在对河台矿区高村矿床进行详细野外地质调查的基础上,通过X射线衍射（XRD）对含金剪切带中各类糜棱岩系列岩石进行系统研究,建立应力变化—成分变异的对比序列,从而进一步揭示剪切变形与金矿化的关系。结果显示,剪切带中白（绢）云母的含量在9%~40%,并且在初糜棱岩、无矿糜棱岩、含矿糜棱岩、无矿超糜棱岩、含矿超糜棱岩中含量呈现出逐渐递增的趋势。白（绢）云母主要为2M1型,b0值分布在0.55505~0.99002 nm之间,在初糜棱岩、无矿糜棱岩和无矿超糜棱岩中逐渐增高,分别形成在低压、中压和高压环境。可见,从初糜棱岩到超糜棱岩,随着变形强度的增加,热液活动也随之增强,从而新生成了大量白（绢）云母。然而,在含矿的糜棱岩和超糜棱岩中还存在一些低压白云母,推测其可能是在后期脆性裂隙中由于流体活动所新形成的。因此,成矿可能经历了两个阶段,即早期的韧性剪切变形阶段导致金的初步富集,后期叠加的脆性破裂阶段形成具有工业品位的矿体。另外,无矿超糜棱岩的石英含量（29.8%）明显低于糜棱岩（44.2%）,推测在形成石英脉型矿体过程中,部分热液可能来自于其围岩超糜棱岩。因此,相对于初糜棱岩和糜棱岩,超糜棱岩中更有利于金矿的形成。 相似文献
2.
新疆萨尔托海石英菱镁岩中发育的韧性剪切带及其对金矿的控制 总被引：3，自引：2，他引：1
萨尔托海金矿产在达拉布特蛇绿混杂岩带中。本文首次在该金矿区厘定出韧性剪切带,糜棱岩或者糜棱岩化石英菱镁岩中构成糜棱面理的矿物(铬云母、石英)形成于韧性剪切变形过程中,而切割糜棱面理的方解石-石英-黄铜矿-白云母脉代表脆性变形阶段的流体活动。根据矿物组合相互切割关系,识别出三期构造变形:早期NE向韧性变形(形成铬云母-石英组合)之后,发生了应力方向显著不同的破裂,形成NNW向分布的方解石-石英-黄铜矿-白云母脉;再晚期,应力方向又恢复到NE向,发育了浅层次的脆性构造破坏,形成了白云母-石英细脉。韧性剪切变形向脆性变形转换期间形成了石英-碳酸盐脉,其中往往含硫化物和自然金,此阶段是萨尔托海金矿的主要成矿时期。韧性剪切带控制着萨尔托海地区的金矿分布,成矿作用主要受沿剪切带迁移流体的控制,穿切糜棱面理的方解石-石英-黄铜矿-白云母脉是主要的找矿标志。韧性剪切带对金矿的显著控制表明,韧脆性转换期间形成的含硫化物石英碳酸盐脉以及相伴生的热液蚀变使金富集成矿,矿体一般赋存在断裂构造复杂的膨胀部位。萨尔托海金矿的成因与蛇绿岩的形成和演化没有关系。对韧性剪切带的系统研究是在该地区取得找矿勘探突破的关键。 相似文献
3.
新疆西准噶尔萨Ⅰ金矿床由含金糜棱岩化石英菱镁岩和含金石英脉组成,矿体围岩为石英菱镁岩、碳酸盐-滑石片岩和蛇纹岩。根据岩相学研究,将萨Ⅰ金矿床的形成过程划分为5个阶段：黄铁矿-石英-碳酸盐阶段（Ⅰ）、自然金-辉砷镍矿-铬云母阶段（Ⅱ）、黄铁矿-碳酸盐-石英阶段（Ⅲ）、自然金-硫化物-石英阶段（Ⅳ）和碳酸盐阶段（Ⅴ）。阶段Ⅰ和阶段Ⅱ对应于石英菱镁岩经历的韧-脆性变形时期,其他3个阶段形成于脆性变形期间,反映出构造性质由挤压向拉伸环境转换的过程。阶段Ⅱ和阶段Ⅳ分别对应于Au-As和Au-Cu成矿作用。金矿化与石英菱镁岩经历的剪切变形过程相关。含金糜棱岩化石英菱镁岩的微量元素含量明显高于未变形的石英菱镁岩,说明剪切带流体输送了相关微量元素和成矿元素。在韧性变形向脆性变形转换过程中,流体压力骤降,含金络合物分解形成金矿。萨Ⅰ金矿床是产在糜棱岩化石英菱镁岩中的严格受剪切带控制的热液脉型金矿床。 相似文献
4.
河台金矿是一个典型的与韧性剪切带有关的金矿床,也是目前粤西、桂东南已发现的最大的金矿床。为了给深边部的找矿提供科学依据,本文对河台金矿伽马能谱K异常进行了研究。河台金矿动力变质分异期、热液期与表生期生成的富钾矿物只有绢云母,表明本区引起伽马能谱K高异常的应为绢云母。这些绢云母可能成因于糜棱岩化过程与金-黄铁矿-石英热液蚀变过程中斜长石的绢云母化。其中,糜棱岩化过程引起的K高异常具有异常宽度小的特点,且具有指示糜棱岩带与矿体位置的意义。金-黄铁矿-石英阶段引起的K高异常具有异常宽度大的特点,且主要发育于糜棱带与不同岩性的接触带。伽马能谱K低异常则可能成因于热液成矿期中金-石英-多金属硫化物阶段的热液蚀变作用及低钾花岗伟晶岩脉的侵入。 相似文献
5.
河台金矿位于广东省高要市境内,是粤东桂西地区最大的金矿。因该金矿严格受韧性剪切带的控制,普遍认为是典型的韧性剪切带型金矿(周崇智和段嘉瑞, 1988;Zhang et al．,2011)。矿区内分布有多条韧性剪切带,但只有少数几条含矿,所发现的含矿韧性剪切带主要为11号糜棱岩带（高村矿段）、9号糜棱岩带（云西矿段）、12号糜棱岩带（后迳矿段）、13号糜棱岩带（河海矿段）等。其中高村矿段和云西矿段是现今勘探开发的主要对象,已累积提交50t金储量。由于金矿体与韧性剪切带关系密切,两者间的成因联系,特别是相关的成岩成矿年龄及构造变形与金矿事件一直是讨论的热点,但仍存在不同看法。对于河台金矿的成矿年龄,前人用各种不同的方法进行了研究。陈好寿和李华芹（1991）利用石英包裹体Rb-Sr法获得了121~129Ma的年龄;翟伟（2004）通过石英全溶法对高村矿段富硫化物中的石英脉进行定年,获得172Ma的成矿年龄,通过锆石U-Pb定年获得河海矿段富硫化物石英脉中热液锆石年龄为152Ma（翟伟,2005）;王成辉（2012）对河海矿段进行研究,通过富硫化物石英脉中绢云母Ar-Ar法定年获得157Ma年龄,通过磁黄铁矿Re-Os定年获得175Ma的成矿年龄。可见,不同方法获得的成矿年龄之间有较大的差异,这些方法中将金矿中广泛发育的硫化物矿物（如黄铁矿、黄铜矿、闪锌矿、方铅矿等）作为定年对象是确定成矿时代的最佳方法。而前人仅对河海矿段进行过磁黄铁矿Re-Os定年,本次研究试图利用硫化物的Rb-Sr定年法对河台金矿的成矿时代进行进一步的约束。 相似文献
6.
韧性剪切带型金矿是一种成矿机制与控矿因素都与韧性剪切带及其演化密切相关的金矿床类型。阿尔金北缘地区不同层次剪切带发育,金矿床受韧性剪切带控制明显,在区域上,韧性剪切带控制金矿床(点)的分布;在矿床范围内,韧性剪切带及其演化过程中形成的韧脆性剪切带既是唯一的赋(含)矿构造,也对矿化带、矿体的形态、产状、规模及分布起决定性的控制作用;压扭性韧性剪切变形特点决定了金矿化类型以蚀变糜棱岩型为主,交代蚀变作用发育。含矿构造裂隙以P型为主,少量D型和R型,个别为R~1型和T型;构造变形所引发的动力分异作用及其形成的动力变质热液是金矿成矿流体的主要来源之一,这与地球化学和成矿流体包裹体研究显示的大平沟金矿床成矿物质主要来源于变质岩、成矿流体有相当部分来源于变质水的特征相吻合。结合糜棱岩磁组构研究,发现磁各向异性度P值与金元素含量呈负相关关系,说明构造变形早于金矿化蚀变作用,这种时序关系进一步佐证了韧性剪切带型金矿床的成矿模式。即大面积的韧性变形构造动力分异作用形成的含金热液不是就地原位矿化,而是向上迁移并集中到范围比较窄小的韧-脆性或脆性裂隙中才发生金元素富集,最终形成金矿床。 相似文献
7.
托莫尔日特金矿区韧脆性剪切带及其控矿作用 总被引：1，自引：0，他引：1
矿区位于近NW-NWW向展布的断裂带内,并严格受其控制.控矿断裂带为一条韧-脆性剪切带,其形成主要经历了早期韧性变形、晚期脆性变形及后期改造破坏3个阶段,叠加于早期韧性剪切带之上的晚期脆性破裂带,是矿脉的主要产出位置,成矿与断裂带的韧-脆性转换密切相关.矿体形成于韧-脆性剪切带的转换带附近,后期由于抬升剥蚀而出露地表.矿体分布可能具有"两层楼"式的垂直分带,上部为石英脉型金矿体,品位较高,但规模不大;下部为糜棱岩型金矿体,规模较大,但品位稍低.因此本区以后的找矿工作中应注意挖掘深部糜棱岩型金矿的潜力. 相似文献
8.
南天山中段萨恨托亥大山口成矿带内的金矿赋存在浅变质浊积岩系碎屑岩内。本文以该带内2个典型金矿———大山口金矿和萨恨托亥金矿为例,对其成矿特征进行了初步研究。研究表明,金矿体受韧脆性剪切带控制,产状稳定,矿石类型简单,硫化物种类单一且含量较低。成矿可分为糜棱岩阶段和石英脉阶段,与控矿的韧脆性剪切带的发展演化各阶段相对应。成矿发生于中低温条件下弱酸性向中性环境过渡阶段,成矿流体是以深源流体(含岩浆热液)为主的多源混合热液(构造热液)。成矿作用为构造成岩成矿(韧性剪切带成矿),矿床成因类型为(构造)热液型金矿, 相似文献
9.
韧-脆性剪切带构造控矿演化模式--以青海省乌兰县托莫尔日特金矿区为例 总被引：1，自引：0，他引：1
通过对青海省乌兰县托莫尔日特金矿区韧－脆性剪切带变形特征、成矿物质与热液来源及运移条件分析，提出了该区构造控矿演化的四阶段模式。该模式认为，早期的韧性剪切变形导致了成矿物质的由深部向浅部、由韧性剪切带外部向韧性剪切带内部的活化迁移，成矿热液在韧性剪切带上部（即韧脆性转换带附近）得以大量聚集。韧性变形后期温压条件降低，韧性变形转化为脆性变形，地表大气降水沿贯通性较强的脆性破裂带大量下渗，到达韧－脆性转换带附近，与该处积聚的成矿热液充分混合，热液性质发生改变，在相对张性或较薄弱的构造有利部位大量沉淀。由于断裂带的周期性活动，成矿物质得到多次沉淀而不断富集，最终形成金矿体。矿体形成后的构造隆升及剥蚀作用，使韧－脆性剪切带出露地表，金矿床也随之出露到近地表处。因此在矿区石英脉型金矿体的下部，可能会存在糜棱岩型金矿体，但品位可能会有所下降。 相似文献
10.
目前,在世界范围内已发现越来越多的金矿赋存于韧性剪切带中,根据其主成矿期与韧性剪切带形成时间的关系可分为同韧性剪切型金矿和韧性剪切后型金矿。同韧性剪切型金矿主成矿时代同容矿韧性剪切带的发生、形成是同步的,韧性剪切活动不仅为成矿提供了空间,而且与成矿直接有关,容矿围岩为超糜棱岩、糜棱岩、初糜棱岩等,靠化学品位圈定矿体,矿石类型以浸染状为主;韧性剪切后型金矿成矿时代明显晚于韧性变形期,二者间隔时间较长,剪切活动仅为成矿提供空间,矿石类型完全取决于成矿前之容矿带的变形特征。 相似文献
11.
S. Viswanathan K. Surya Prakash Rao B. Mahabaleswar 《Journal of the Geological Society of India》2013,82(6):621-627
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours. 相似文献
12.
E. M. Prasolov S. A. Sergeev B. V. Belyatsky E. S. Bogomolov K. A. Gruzdov I. N. Kapitonov R. Sh. Krymsky V. O. Khalenev 《Geochemistry International》2018,56(1):46-64
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others. 相似文献
13.
14.
奥地利安东帕有限公司 《岩矿测试》2009,28(3):306-306
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提 相似文献
15.
16.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance. 相似文献
17.
Alexander E. C. Broberg J. S. Kehren A. R. Graziani M. M. Turri W. L. 《Environmental Geology》1993,22(4):353-361
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes. 相似文献
18.
岩石密度和超高压岩石折返速率 总被引：1，自引：3，他引：1
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。 相似文献
19.
20.
Mercury,arsenic, antimony,and selenium contents of sediment from the Kuskokwim River,Bethel, Alaska,USA 总被引：1，自引：0，他引：1
The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources. 相似文献