共查询到20条相似文献，搜索用时 83 毫秒
1.
吉林红旗岭铜镍矿床的地质特征及成因 总被引：6，自引：0，他引：6
红旗岭铜镍矿床地处华北地台和吉黑地槽系接触带———辉发河断裂带内 ,属大型铜镍硫化物矿床。矿区出露地层为下元古界呼兰群变质岩系。呈北东向展布的辉发河断裂具有切割深度大、继承性活动频繁等特征 ,由该断裂构造活动派生的北西向构造构成区域性重要的控岩控矿构造 ,控制超镁铁、镁铁质岩体及铜镍硫化物矿体在空间上呈北西向产出。与铜镍矿成矿有关的岩体具有复合杂岩体特征 ,多属辉长岩—辉石岩—橄榄岩型镁铁—超镁铁质岩。铜镍矿体呈似板状、脉状、透镜状及囊状等赋存于镁铁—超镁铁质岩体内。岩矿石微量元素特征、稀土元素地球化学特征均反映其为地幔部分熔融作用的产物 ,且矿石与镁铁—超镁铁质岩具同源性 ,矿床属岩浆深部熔离分异成因 相似文献
2.
祁连-龙首山地区发育多处镁铁-超镁铁质岩体,其成矿表现及与金川矿床所代表的大规模岩浆事件的关系尚不清晰。本次研究通过区域地质建造对比、详细剖面刻画,岩石学、地球化学辅助,厘定了祁连-龙首山地区镁铁-超镁铁质岩体年代学格架与含矿性评价,初步表明金川超大型岩浆铜镍硫化物矿床是新元古代大规模岩浆事件的产物,可能与诺迪尼亚超大陆的裂解所导致的大火成岩省有关。在其外围,发育有多期镁铁-超镁铁质岩体,尽管南祁连化隆地区所发现的镁铁-超镁铁质岩体与金川铜镍矿为非同期的产物,但也表明是一期比较重要的岩浆铜镍矿成矿事件,对于拓展区域找矿实现找矿突破具有重要作用。 相似文献
3.
新疆北部岩浆型铜镍硫化物矿床控矿因素的研究 总被引：8，自引：0，他引：8
含矿铜镍岩体多产于岛弧和弧后盆地中，属造山带型岩体，严格地受深大断裂及其次一级断裂构造的控制；最有工业意义的岩浆型铜镍矿床均形成于准噶尔型铁镁质地壳内；含铜镍基性－起基性杂岩体的岩石化学特征对成矿存在着控制作用，多数含矿岩体属于偏镁系岩石和铁质基性杂岩或铁质基性－超基性杂岩；含矿岩休出露面积小于１０ｋｍ￣２，分异良好，相带清楚，多为复合岩体；具有重要工业意义的岩浆型铜镍矿床的成矿时代集中在海西中期至晚期． 相似文献
4.
吉林红旗岭铜镍矿床综合找矿模型 总被引：3，自引：0，他引：3
董耀松 《吉林大学学报(地球科学版)》2003,33(2):152-155,177
以矿区地质背景、含矿岩体地质特征为基础，分析了吉林红旗岭钢镍矿床的成矿过程。提出含矿岩体是受构造控制的海西期镁铁—超模铁质岩体，岩体具有轻稀土富集、重稀土亏损的特征的地球化学信息和低阻、高磁、高重力的地球物理异常等信息。结合地球化学与地球物理勘查方法建立了红旗岭钢镍矿床综合找矿模型，利用找矿模型评价了红旗岭矿区的岩体，确定沿老砬子-付家-黄瓜营子断裂带分布的镁铁-超模铁质岩体是找寻矿床的有利靶区。其中1号、7号岩体的深部应作为找寻大中型富矿岩体或隐代富矿岩体的有利靶区。 相似文献
5.
6.
北疆二叠纪镁铁-超镁铁岩铜、镍矿床的构造背景、岩体类型、基本特征、相对剥蚀程度、含矿性评价标志及成矿潜力分析 总被引：9，自引：0，他引：9
北疆地区不同构造单元内分布大量的镁铁-超镁铁质岩体,含铜镍硫化物矿化的岩体集中于早二叠世。含铜镍岩体顶与底的识别是一世界性难题,而对深部矿与隐伏矿的勘查十分重要。根据这些镁铁-超镁铁岩体地表出露面积大小和岩相期次,可分为大岩体(大于5～40km2)、小复式岩体(1～3km2)和单式岩体(小于0.1km2)三类。三类岩体在岩体形态、产状、岩相构成、超镁铁质岩相所占比例、赋矿岩相、矿体空间分布以及矿石中Cu/Ni值等方面都有所不同。根据岩体和矿化的基本特征,结合矿物粒度、蚀变强弱、有无同期玄武岩、辉绿岩等,可以综合判定岩体的相对剥蚀程度与埋深。相对剥蚀程度结合区域上元素化探异常和地球物理异常的细微差别,可作为评价镁铁-超镁铁岩体的铜、镍成矿潜力的有力工具。镁铁质岩墙、小岩体、小岩体群、产于大辉长岩体中的小的超镁铁岩露头,强烈蚀变的镁铁-超镁铁岩区,重磁异常区,物化探异常叠加区等均是今后北疆寻找小岩体大矿床的重点靶区。 相似文献
7.
为了对中亚造山成矿带东段南缘红旗岭岩浆型铜镍硫化物矿床深部（500～1 000 m）隐伏矿体进行成矿预测,采用高精度重力和2.5维人机交互式反演方法,对含矿性较好的镁铁质—超镁铁质岩体（如#1、#3及新#3岩体）进行底部含矿性研究。结果表明：高精度重力异常开展不同高度上延并结合垂向一阶导数等数据处理,可有效地厘定深部隐伏岩体空间展布;2.5维人机交互式反演方法可以识别深部微弱的矿致异常,推测研究区#3岩体埋深700～1 100 m存在5个脉状盲矿体。经钻探验证,成功发现32 259 t]镍矿（矿石平均品位达0.36%）,其中②号矿体为最厚矿体,见矿深度为700～1 100 m,镍矿平均品位为0.39%,储量达27 433 t。 相似文献
8.
9.
位于中亚造山带北缘的喀拉通克早二叠世铜镍硫化物矿区是新疆规模最大的铜镍矿山,包含13个岩体,相当部分为隐伏岩体,其中1号、2号、3号、9号矿床为主力矿床,经过30余年持续开发,最大开采深度已达740 m,已面临后备资源不足的危机。已知矿体主要产于辉长岩、苏长岩、辉长苏长岩以及橄榄苏长岩中,甚至角闪辉长岩局部也含矿,未见超镁铁岩产出,具有显著的磁性(200 nT)、重力(0.29×10~(-5)m/s~2)、激化率异常,以镁铁岩含矿、岩体规模小且成群成带、分异演化程度高、富铜(Cu/Ni约3:2)、PGE较高、块状硫化物贯入矿体普遍发育为特色。其围岩为含炭质板岩、片岩和凝灰岩,变形强烈,常规电法受到炭质层的干扰。依据岩石学、地球化学研究,岩浆源于软流圈地幔,基于与东天山同期铜镍矿床含矿岩相及其比例和剩余重力异常的比较,推断其应发育有相当比例的超镁铁岩,因而深部出现超基性岩的可能性很高,且含矿性应更好。这一推断得到坑道钻探的证实,2013年矿区在Y2岩体东段650~740 m深度和Y2岩体西段400~500 m深度发现隐伏超镁铁岩且含矿,局部见贯入块状矿体。橄榄辉石岩、辉石橄榄岩系矿区首次发现,粒度很细,发育强烈的蛇纹石化、纤闪石化,推测只是隐伏超基性岩的头部。结合控岩控矿构造的追溯及南、北岩带的侧伏和倾伏方向判断,硫化物珠滴构造的发现与系统观测统计,围岩烘烤边和角岩化的研究分析,提出南岩带主岩浆通道位于Y2与Y3岩体之间,而不是原普遍认为的岩浆通道位于Y1与Y2岩体之间。结合矿区的现状,提出采用高分辨率浅层地震、CSAMT和瞬变电磁地-井测量,结合传统的高精度重力勘探、磁法勘探和激发极化法来勘探和预测南岩带深部隐伏含矿超镁铁岩的空间位置和产状,圈定岩浆通道和隐伏铜镍矿体,进而推动北岩带和外围G21、22号岩体的深部探矿工作。 相似文献
10.
红旗岭―茶尖岭矿带发育镁铁-超镁铁岩体(岩墙群)及铜镍硫化物矿床。关于该矿带含矿岩体时代的观点包括华力西期和印支期。含铜镍硫化物矿床的镁铁-超镁铁岩体(岩墙群)发育要件:初始成熟陆壳、较薄的岩石圈、拉张应力背景,三者缺一不可。只有符合地质事实、符合矿带含铜镍矿镁铁-超镁铁岩体(岩墙群)发育要件的同位素定年数据,才能代表含矿岩体的成岩成矿时代。红旗岭—茶尖岭矿带印支期不具备含矿镁铁-超镁铁岩体(岩墙群)产出的要件。华力西期350Ma,矿带具备红旗岭1号、7号含中、大型铜镍硫化物矿床的镁铁-超镁铁岩体产出的要件,理应代表1号、7号岩体时代;华力西期258Ma,矿带具备茶尖岭包括1号、6号、新6号等含小型铜镍硫化物矿床的镁铁-超镁铁质岩体产出的要件,均代表茶尖岭矿区的镁铁-超镁铁岩体的时代。 相似文献
11.
Between 1985 and 1991, two new mountain protected areas (MTNPA) covering more than 35,000 km2 and based on participatory management models — the Makalu-Barun National Park and Conservation Area, Nepal, and Qomolangma Nature Preserve, Tibet Autonomous Region — were successfully established through the collaborative efforts of Woodlands Mountain Institute and conservationists in China and Nepal. Characteristics common to both projects include the importance of establishing (1) effective rationales, (2) local support constituencies, (3) a senior advisory group, (4) a task force, (5) linkages between conservation and development, and (6) fund raising mechanisms. The lessons derived from the experiences of Woodlands Mountain Institute are of significant value to others in preserving MTNPA. Increased collaboration and communication between all interested in conservation, however, will remain a critical component for expanding mountain protected area coverage to throughout the world. 相似文献
12.
Most sulfide-rich magmatic Ni-Cu-(PGE) deposits form in dynamic magmatic systems by partial melting S-bearing wall rocks with variable degrees of assimilation of miscible silicate and volatile components, and generation of barren to weakly-mineralized immiscible Fe sulfide xenomelts into which Ni-Cu-Co-PGE partition from the magma. Some exceptionally-thick magmatic Cr deposits may form by partial melting oxide-bearing wall rocks with variable degrees of assimilation of the miscible silicate and volatile components, and generation of barren Fe ± Ti oxide xenocrysts into which Cr-Mg-V ± Ti partition from the magma. The products of these processes are variably preserved as skarns, residues, xenoliths, xenocrysts, xenomelts, and xenovolatiles, which play important to critical roles in ore genesis, transport, localization, and/or modification. Incorporation of barren xenoliths/autoliths may induce small amounts of sulfide/chromite to segregate, but incorporation of sulfide xenomelts or oxide xenocrysts with dynamic upgrading of metal tenors (PGE > Cu > Ni > Co and Cr > V > Ti, respectively) is required to make significant ore deposits. Silicate xenomelts are only rarely preserved, but will be variably depleted in chalcophile and ferrous metals. Less dense felsic xenoliths may aid upward sulfide transport by increasing the effective viscosity and decreasing the bulk density of the magma. Denser mafic or metamorphosed xenoliths may also increase the effective viscosity of the magma, but may aid downward sulfide transport by increasing the bulk density of the magma. Sulfide wets olivine, so olivine xenocrysts may act as filter beds to collect advected finely dispersed sulfide droplets, but other silicates and xenoliths may not be wetted by sulfides. Xenovolatiles may retard settling of – or in some cases float – dense sulfide droplets. Reactions of sulfide melts with felsic country rocks may generate Fe-rich skarns that may allow sulfide melts to fractionate to more extreme Cu-Ni-rich compositions. Xenoliths, xenocrysts, xenomelts, and xenovolatiles are more likely to be preserved in cooler basaltic magmas than in hotter komatiitic magmas, and are more likely to be preserved in less dynamic (less turbulent) systems/domain/phases than in more dynamic (more turbulent) systems/domains/phases. Massive to semi-massive Ni-Cu-PGE and Cr mineralization and xenoliths are often localized within footwall embayments, dilations/jogs in dikes, throats of magma conduits, and the horizontal segments of dike-chonolith and dike-sill complexes, which represent fluid dynamic traps for both ascending and descending sulfides/oxides. If skarns, residues, xenoliths, xenocrysts, xenomelts, and/or xenovolatiles are present, they provide important constraints on ore genesis and they are valuable exploration indicators, but they must be included in elemental and isotopic mass balance calculations. 相似文献
13.
14.
《Chemical Geology》2007,236(1-2):13-26
We examined the coprecipitation behavior of Ti, Mo, Sn and Sb in Ca–Al–Mg fluorides under two different fluoride forming conditions: at < 70 °C in an ultrasonic bath (denoted as the ultrasonic method) and at 245 °C using a Teflon bomb (denoted as the bomb method). In the ultrasonic method, small amounts of Ti, Mo and Sn coprecipitation were observed with 100% Ca and 100% Mg fluorides. No coprecipitation of Ti, Mo, Sn and Sb in Ca–Al–Mg fluorides occurred when the sample was decomposed by the bomb method except for 100% Ca fluoride. Based on our coprecipitation observations, we have developed a simultaneous determination method for B, Ti, Zr, Nb, Mo, Sn, Sb, Hf and Ta by Q-pole type ICP-MS (ICP-QMS) and sector field type ICP-MS (ICP-SFMS). 9–50 mg of samples with Zr–Mo–Sn–Sb–Hf spikes were decomposed by HF using the bomb method and the ultrasonic method with B spike. The sample was then evaporated and re-dissolved into 0.5 mol l− 1 HF, followed by the removal of fluorides by centrifuging. B, Zr, Mo, Sn, Sb and Hf were measured by ID method. Nb and Ta were measured by the ID-internal standardization method, based on Nb/Mo and Ta/Mo ratios using ICP-QMS, for which pseudo-FI was developed and applied. When 100% recovery yields of Zr and Hf are expected, Nb/Zr and Ta/Hf ratios may also be used. Ti was determined by the ID-internal standardization method, based on the Ti/Nb ratio from ICP-SFMS. Only 0.053 ml sample solution was required for measurement of all 9 elements. Dilution factors of ≤ 340 were aspirated without matrix effects. To demonstrate the applicability of our method, 4 carbonaceous chondrites (Ivuna, Orgueil, Cold Bokkeveld and Allende) as well as GSJ and USGS silicate reference materials of basalts, andesites and peridotites were analyzed. Our analytical results are consistent with previous studies, and the mean reproducibility of each element is 1.0–4.6% for basalts and andesites, and 6.7–11% for peridotites except for TiO2. 相似文献
15.
I. Bejarano-Ramirez Jose M. Jurado R. Muñiz-Valencia Á. Alcázar Silvia G. Ceballos-Magaña A. Olivos-Ortiz O. Rangel 《International Journal of Environmental Science and Technology》2017,14(6):1333-1342
The contents of As, Cd, Cu, Cr, Mg, Mn, Ni, Pb and Zn have been determined in sediment and water samples from Valle de las Garzas estuary and Port Manzanillo (Colima, Mexico) using ICP-AES. The concentrations of these elements were used for a comparative study to determine the distribution of heavy metals and to evaluate which elements reflect natural or anthropogenic backgrounds. For this purpose, seven sampling points were selected: Four of them correspond to the lagoon, and three were situated in the port. Statistical analysis of the mineral content was assessed. Initially, data comparison was assessed by statistical tests for each variable. Principal component analysis was then applied considering the influence of all variables at the same time by obtaining the distribution of samples according to their scores in the principal component space. In this way, four studies were carried out: (1) study of sediments collected during the dry season; (2) study of sediments collected during the rainy season; (3) comparative study between sediments from rainy and dry season; and (4) study of water composition collected during rainy season. From the results of the performed analyses, it can be concluded that metals distribution pattern reflected natural and anthropogenic backgrounds (e.g., sediments from the lagoon, situated at the beginning of the rain channel, presented high contents of Zn and Cu, perhaps related to anthropogenic activities or the influence of igneous sediments). 相似文献
16.
《Geoforum》2017
This article advances critical geographies of youth through examining the spatiality implicit in the imagined futures of young women in rural India. Geographers and other scholars of youth have begun to pay more attention to the interplay between young people’s past, present, and imagined futures. Within this emerging body of scholarship the role of the family and peer group in influencing young people’s orientations toward the future remain underexamined. Drawing on eleven months of ethnographic fieldwork, my research focuses on a first generation of college-going young women from socioeconomically marginalized backgrounds in India’s westernmost state of Gujarat. I draw on the “possible selves” theoretical construct in order to deploy a flexible conceptual framework that links imagined post-educational trajectories with motivation to act in the present. In tracing the physical movement of these young women as they navigate and complete college, my analysis highlights the ways in which particular kinds of spaces and spatial arrangements facilitate and limit intra- and inter-generational contact, and the extent to which this affects young women’s conceptions of the future. I conclude by considering the wider implications of my research for ongoing debates surrounding youth transitions, relational geographies of age, and education in the Global South. 相似文献
17.
Models have become so fashionable that many scientists and engineers cannot imagine working without them. The predominant use of computer codes to execute model calculations has blurred the distinction between code and model. The recent controversy regarding model validation has brought into question what we mean by a ‘model’ and by ‘validation.’ It has become apparent that the usual meaning of validation may be common in engineering practice and seems useful in legal practice but it is contrary to scientific practice and brings into question our understanding of science and how it can best be applied to such problems as hazardous waste characterization, remediation, and aqueous geochemistry in general. This review summarizes arguments against using the phrase model validation and examines efforts to validate models for high-level radioactive waste management and for permitting and monitoring open-pit mines. Part of the controversy comes from a misunderstanding of ‘prediction’ and the need to distinguish logical from temporal prediction. Another problem stems from the difference in the engineering approach contrasted with the scientific approach. The reductionist influence on the way we approach environmental investigations also limits our ability to model the interconnected nature of reality. Guidelines are proposed to improve our perceptions and proper utilization of models. Use of the word ‘validation’ is strongly discouraged when discussing model reliability. 相似文献
18.
Hirokazu Fujimaki 《Contributions to Mineralogy and Petrology》1986,94(1):42-45
Concentration ratios of Hf, Zr, and REE between zircon, apatite, and liquid were determined for three igneous compositions: two andesites and a diorite. The concentration ratios of these elements between zircon and corresponding liquid can approximate the partition coefficient. Although the concentration ratios between apatite and andesite groundmass can be considered as partition coefficients, those for the apatite in the diorite may deviate from the partition coefficients. The HREE partition coefficients between zircon and liquid are very large (100 for Er to 500 for Lu), and the Hf partition coefficient is even larger. The REE partition coefficients between apatite and liquid are convex upward, and large (D=10–100), whereas the Hf and Zr partition coefficients are less than 1. The large differences between partition coefficients of Lu and Hf for zircon-liquid and for apatite-liquid are confirmed. These partition coefficients are useful for petrogenetic models involving zircon and apatite. 相似文献
19.
The shape of sedimentary particles may carry important information on their history. Current approaches to shape classification
(e.g. the Zingg or the Sneed and Folk system) rely on shape indices derived from the measurement of the three principal axes
of the approximating tri-axial ellipsoid. While these systems have undoubtedly proved to be useful tools, their application
inevitably requires tedious and ambiguous measurements, also classification involves the introduction of arbitrarily chosen
constants. Here we propose an alternative classification system based on the (integer) number of static equilibria. The latter
are points of the surface where the pebble is at rest on a horizontal, frictionless support. As opposed to the Zingg system,
our method relies on counting rather than measuring. We show that equilibria typically exist on two well-separated (micro
and macro) scales. Equilibria can be readily counted by simple hand experiments, i.e. the new classification scheme is practically
applicable. Based on statistical results from two different locations we demonstrate that pebbles are well mixed with respect
to the new classes, i.e. the new classification is reliable and stable in that sense. We also show that the Zingg statistics
can be extracted from the new statistics; however, substantial additional information is also available. From the practical
point of view, E-classification is substantially faster than the Zingg method. 相似文献
20.
Pools,riffles, and channelization 总被引：2，自引：0，他引：2
Edward A. Keller 《Environmental Geology》1978,2(2):119-127
The addition of regularly spaced deeps (pools) and shallows (riffles) that provide a variety of flow conditions, areal sorting
of stream-bed material, cover for wildlife, and a positive aesthetic experience, may be desirable in many channel projects.
Such designs will reduce adverse environmental impacts of stream channel modifications.
Analysis of variance for pool-to-pool spacing data suggests that there is no significant difference with respect to channel
width between pools that form in natural streams and those in streams affected by a variety of human uses. Short of channelization,
which changes the channel width, pools and riffles, within limits, are not particularly sensitive to environmental stress.
Experiments in Gum Branch near Charlotte, North Carolina, support the hypothesis that channel form and process evolve in harmony
and that manipulation of cross-channel morphology can influence the development of desired channel processes. Planned manipulation
of its channel form induced Gum Branch to develop as desired. Morphologic stability consisting of incipient point bars, pools,
and riffles was maintained over a period of high magnitude flood events, only to be degraded later by a wave of sediment derived
from upstream construction and stream-bank failures. Thus, environmentally desirable channel morphology in urban streams cannot
remain stable if changes in the sediment load or storm-water runoff exceed the limits of the stream's ability to make internal
adjustments while maintaining morphologic stability. 相似文献