共查询到20条相似文献，搜索用时 62 毫秒
1.
玲珑-焦家式金矿床流体包裹体的稀土和微量元素特征 总被引：2，自引：3，他引：2
应用热爆提取和 ICP-MS 方法,研究了玲珑-焦家式金矿床脉石英和绢英岩中流体包裹体的微量元素特征。结果表明,流体包裹体中 REE 配分模式均表现为 LREE 富集型,轻、重稀土具有较好的分馏,LREE/HREE=6.07～26.41。但轻重稀土内部分异不明显,(La/Sm)、=2.15～5.11,(Gd/Lu)=0.72～5.24。成矿流体具有弱的 Eu 正异常,δEu=1.05～7.09,与中高温、弱酸性的现代地热成矿系统相似。流体包裹体/中国陆壳元素丰度标准化后表明,流体中富集的重金属元素有 Cu、Mo、Pb、Bi 等,它们的富集系数大于1。成矿流体中亏损的元素有 Ti、V、Cr、Co、Li、Zr、Nb、Th、U 等。流体包裹体微量元素、稀土元素特征为金矿床的成因研究增添了新的证据。玲珑-焦家式金矿床的流体包裹体具相似的 REE 特征,而与其它地区的金矿床或其它类型的矿床则明显不同,说明该区金矿床成矿地球动力学背景相同,都与中生代燕山期构造体制转折条下热液活动有关。 相似文献
2.
安徽铜陵冬瓜山铜金矿床流体包裹体微量元素地球化学特征及其地质意义 总被引：9，自引：3，他引：6
安徽铜陵冬瓜山铜金矿床是狮子山矿田中埋藏深度和地质储量最大的矿床,同时发育层控矽卡岩型和斑岩型矿体.该矿床流体成矿从早期到晚期经历了多个矿化阶段.本文选取了钾长石化阶段、矽卡岩化阶段、早石英硫化物阶段和晚石英硫化物阶段矿石中石英的原生流体包裹体进行了ICP-MS分析,结果表明,各成矿阶段石英流体包裹体微量元素的陆壳标准化分布曲线具有较好的一致性,显示成矿流体具有统一的来源和演化;流体包裹体的REE配分曲线与岩浆岩的稀土元素配分曲线相似,均为平缓右倾型,轻稀土明显富集,LREE/HREE比值与岩浆岩接近,显示成矿热液具有深部岩浆来源的特征.流体包裹体微量元素的直接分析显示成矿流体为矿质富集的热液流体,且各成矿阶段热液流体中的成矿元素含量高低的变化与相应阶段的矿化强度及矿石品位高低变化相一致,早石英硫化物阶段是矿质集中富集的最佳阶段,至晚石英硫化物阶段可能有浅部热液流体的混入. 相似文献
3.
小秦岭文峪-东闯金矿床流体包裹体的微量元素及成因意义 总被引：7，自引：0，他引：7
运用热爆法提取和ICP-MS技术,研究了小秦岭文峪-东闯金矿不同阶段脉石英流体包裹体的稀土和微量元素.数据表明,石英流体包裹体的LREE相对富集,ΣLREE/ΣHREE为3.19～8.45,且从早阶段至晚阶段该比值有增长之势.轻重稀土分馏程度不大, 存在着一定的Eu异常.流体中Cu、Zn、Mo、W、Pb等微量成矿元素的富集系数远大于1.结合太华群变质岩系、文峪花岗岩体的REE和Cu、Pb、Zn等微量元素特征,认为金矿床的成矿物质主要来自太华群变质岩系. 相似文献
4.
东天山马头滩金矿成矿流体稀土元素特征 总被引：3，自引：1，他引：3
用ICP－MS方法对金矿中磁铁矿－黄铁矿－绿泥石－石英成矿阶段（第Ⅱ成矿阶段）和多金属硫化物阶段（第Ⅲ成矿阶段）石英中的流体包裹体的稀土元素测定，发现第Ⅱ、Ⅲ成矿阶段流体中的REE组成具相同的Eu亏损和相似的右倾斜分布型式。与矿区火山岩和侵入岩的REE组分对比分析，认为成矿流体的REE组成主要继承了火山岩和侵入岩（早期岩浆热液）的Eu亏损和右倾斜特征，但前者的LREE更加富集、分布曲线更加向右陡倾斜，反映与晚期变质水和大气降水的混合作用后，成矿流体中REE组成发生了变化。 相似文献
5.
新疆西天山查岗诺尔铁矿床磁铁矿和石榴石微量元素特征及其对矿床成因的制约 总被引：10，自引：4，他引：6
查岗诺尔大型磁铁矿床位于西天山阿吾拉勒东段,赋存于下石炭统大哈拉军山组安山岩及安山质火山碎屑岩之中,主体矿底板夹透镜状的大理岩,矿体主要为层状、似层状、透镜状。根据矿石组构和矿物共生特征,可以划分为岩浆期和热液期两个成矿期,后者包括矽卡岩和石英-硫化物两个亚成矿期,进一步可以细分为6个成矿阶段。岩浆期的磁铁矿∑REE很低,稀土配分模式大致呈轻稀土、重稀土较富集而中稀土亏损的U型,富Ti、V、Cr,表明铁质可能来自安山质岩浆的结晶分异作用; 矽卡岩亚成矿期的磁铁矿∑REE极低,略微富集LREE,其它稀土元素亏损强烈,贫Ti、V,略富集Ni、Co和Cu。矽卡岩亚期的含矿和无矿矽卡岩中的石榴石的稀土配分模式类似,∑REE含量相对较高,呈HREE富集、LREE亏损、弱正Eu异常的分布型式,显示了交代成因石榴石的特征,暗示与其共生的磁铁矿也是通过热液流体与围岩地层的交代反应生成的,铁质来自围岩。结合矿床地质与微量元素地球化学,认为查岗诺尔铁矿可能是岩浆型和矽卡岩型(主要)的复合叠加矿床。 相似文献
6.
7.
山东金青顶金矿床和七宝山金矿床的流体包裹体REE组成 总被引：6，自引：0，他引：6
文章运用电感耦合等离子体质谱（ICP-MS）方法，研究了金青顶金矿床和七宝山金矿床的脉石英中流体包裹体REE组成特征，结果表明流体包裹体的REE均为LREE富集型，并显示Eu正异常。成矿流体REE配分模式和REE参数特征表明它们具有相当的来源。与金矿有关的成矿母岩，即昆嵛山花岗岩和七宝山次火山岩的REE特征也极为相似，反映成矿流体的REE组成都有从成岩向成矿过程演化继承的关系。矿床流体包裹体REE组成的相似特征及矿床碳氧同位素等特点表明，金青顶金矿床和七宝山金矿床是华北东部中生代同一构造热事件的产物。 相似文献
8.
《矿物学报》2015,35(1)
以康滇地轴古元古代拉拉铁氧化物-铜-金(IOCG)矿床中不同期次萤石的稀土元素为研究对象,讨论其地球化学特征及指示意义.研究结果表明:拉拉IOCG矿床中有变质期和热液期2期萤石产出,变质期萤石分为早晚2个阶段,与铜钼矿化关系密切,形成温度较高,为同源不同阶段产物;热液期萤石与变质期不同源,为后期热事件产物.萤石整体表现出REE总量高的特征;从早期到晚期,萤石稀土总量呈逐渐减少趋势;变质期萤石是矿床中主要的REE载体之一.变质期成矿流体稀土含量较高,热液期成矿流体稀土含量较低.稀土配分模式呈LREE富集、HREE亏损的右倾型,轻重稀土分异明显,萤石的稀土配分模式受溶液体系中REE络合物稳定性的影响.变质期萤石继承了钠质火山岩的Ce、Eu异常特征,形成变质期萤石的高温变质流体具有负Ce异常且同时存在Eu2+和Eu3+;热液期萤石成矿流体具有温度低、氧逸度高的特征.Y的含量变化可能是引起本矿床萤石颜色变化的原因之一,其含量与颜色深浅呈负相关关系. 相似文献
9.
以康滇地轴古元古代拉拉铁氧化物-铜-金(IOCG)矿床中不同期次萤石的稀土元素为研究对象,讨论其地球化学特征及指示意义。研究结果表明:拉拉IOCG矿床中有变质期和热液期2期萤石产出,变质期萤石分为早晚2个阶段,与铜钼矿化关系密切,形成温度较高,为同源不同阶段产物;热液期萤石与变质期不同源,为后期热事件产物。萤石整体表现出REE总量高的特征;从早期到晚期,萤石稀土总量呈逐渐减少趋势;变质期萤石是矿床中主要的REE载体之一。变质期成矿流体稀土含量较高,热液期成矿流体稀土含量较低。稀土配分模式呈LREE富集、HREE亏损的右倾型,轻重稀土分异明显,萤石的稀土配分模式受溶液体系中REE络合物稳定性的影响。变质期萤石继承了钠质火山岩的Ce、Eu异常特征,形成变质期萤石的高温变质流体具有负Ce异常且同时存在Eu2+和Eu3+;热液期萤石成矿流体具有温度低、氧逸度高的特征。Y的含量变化可能是引起本矿床萤石颜色变化的原因之一,其含量与颜色深浅呈负相关关系。 相似文献
10.
安徽池州铜山铜矿床元素地球化学分带特征及意义 总被引：2，自引：1，他引：1
铜山铜矿是长江中下游成矿带内安庆-贵池矿集区中的一个中型矽卡岩型矿床,矿体赋存于铜山岩体与下二叠统栖霞组碳酸盐岩间的接触带内.典型剖面系统取样分析结果显示:从岩浆岩、矽卡岩到碳酸盐岩,元素地球化学组成总体上表现为渐变分带特征,即靠近岩体的矽卡岩富集Si、Fe、Mg及亲铁元素Co和亲铜元素Cu、Ag;远离岩体的矽卡岩富集Ca、Mn、Al、Ti、REE和亲铜元素Pb、Zn;远离大理岩带的强硅化蚀变岩富集Si、Fe、Li和Co,而强烈亏损Ca、Sr和REE.这种分带可以依据元素活化迁移理论加以解释.在矽卡岩形成过程中,岩浆热液携带Si、Fe、Mg、Al、Li、REE、大离子亲石元素Rb、Cs、亲铁亲铜元素Co、V、Zn以及高场强元素Ta、Zr、Nb、Hf、Ga、Be向大理岩迁移并富集于形成的矽卡岩中;大理岩中的Ca被活化后进入矽卡岩体系,而Sr、K及Pb则随流体搬运迁出.蚀变及矿化较弱的矽卡岩稀土总量较高(ΣREE=122.0×10-6),LREE富集[(La/Sm)N =3.99],HREE亏损[(Gd/Yb)N=2.85],Eu显示负异常(δEu =0.69),重稀土配分形式与新鲜石英二长斑岩相似,但La、Ce等轻稀土元素相对亏损.矽卡岩剖面元素分带特征及稀土配分模式指示铜山矽卡岩铜矿床为接触交代成因.结合已有氢氧同位素结果,认为铜山铜矿成矿流体主要来自岩浆热液,在矽卡岩退化蚀变和成矿期间有大气降水混入成矿流体. 相似文献
11.
S. Viswanathan K. Surya Prakash Rao B. Mahabaleswar 《Journal of the Geological Society of India》2013,82(6):621-627
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours. 相似文献
12.
E. M. Prasolov S. A. Sergeev B. V. Belyatsky E. S. Bogomolov K. A. Gruzdov I. N. Kapitonov R. Sh. Krymsky V. O. Khalenev 《Geochemistry International》2018,56(1):46-64
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others. 相似文献
13.
14.
奥地利安东帕有限公司 《岩矿测试》2009,28(3):306-306
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提 相似文献
15.
16.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance. 相似文献
17.
Alexander E. C. Broberg J. S. Kehren A. R. Graziani M. M. Turri W. L. 《Environmental Geology》1993,22(4):353-361
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes. 相似文献
18.
岩石密度和超高压岩石折返速率 总被引：1，自引：3，他引：1
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。 相似文献
19.
20.
滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床. 相似文献