共查询到20条相似文献，搜索用时 484 毫秒
1.
亚塑性模型为模拟颗粒材料的非线性力学行为提供了一条新途径,特别是CLoE亚塑性模型在模拟应变局部化时具有一定的优势。然而该模型在模拟小幅应力-应变循环时表现出一定的锯齿效应。为了克服该效应,基于颗粒间应变张量的概念发展了修正的CLoE亚塑性模型以正确模拟循环荷载下密砂的力学行为。此外,为保证单调荷载作用下修正模型与原模型预测结果的一致性,改进了颗粒间应变率及颗粒间最大应变的定义。数值算例表明:（1）修正模型保留了克服锯齿效应的优点。（2）修正模型能够反映不同振幅条件下的卸载刚度。（3）在大振幅循环条件下,滞回圈的面积随着循环次数增加而增大。（4）修正模型能够保证单调加载条件下所得结果与原模型的一致性。（5）修正模型可以反映材料的疲劳破坏机制。 相似文献
2.
3.
4.
As is well known, granular soils under cyclic loading dissipate a large amount of energy and accumulate large irreversible strains. Usually, with time, this second effect reduces and the accumulation rate decreases with the number of cycles until obtaining a sort of ideal stationary cyclic state at which ratcheting disappears. In this paper, only this ideal state is taken into consideration and simulated by means of a multi‐mechanism constitutive model for plastic adaptation. For this purpose, the concept of cycle is discussed, many different categories of cyclic stress/strain paths are considered and some theoretical issues concerning both the flow and the strain‐hardening rules are tackled. Even though the paper focuses on soil behaviour, the conclusions can be extended to all materials exhibiting ratcheting due to volumetric behaviour.Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
5.
波浪荷载下海洋土孔隙水压力内时模型的研究 总被引：1，自引：1，他引：0
作者导出了基于 Gibbs 自由能和应力内时标度基础上的海洋土内时剪胀方程,由此建立了预测均匀和不均匀波浪循环荷载下不排水时孔隙水压力的模型。该模型不仅很好地拟合了实验数据,还能较好地说明了循环荷载作用下孔隙水压力上升的机理,可以很方便地用于波浪循环荷载作用下的液化势分析中。 相似文献
6.
This paper investigates the settlement behaviour of a strip footing seating on the crest of an embankment and subjected to cyclic loading. The embankment fill is a dense sand and the issue is the gradual accumulation of settlement over a large number of load repetitions. Cyclic triaxial tests were first conducted to develop a consistent but simple material model for numerical implementation. Particular emphasis was placed on linking the stress-strain behaviour of an unload-reload cycle to the accumulation of permanent strain, with only five input parameters required to model the cyclic behaviour. The material model was implemented in a numerical analysis to compute the settlement behaviour obtained from model tests conducted by another researcher. It is pertinent to highlight that the same soil, compacted to same density at same moisture content, was used for both the cyclic triaxial tests and model tests. Reasonable to good agreement between the experimental and numerical results was achieved. 相似文献
7.
基于Hardin曲线的土体边界面本构模型在ADINA软件中的实现 总被引：1，自引：0，他引：1
为了提出一种适合于岩土地震数值模拟的土体本构模型,基于土体动应力-应变关系的Hardin曲线及其在非等幅往返荷载下的Pyke修正,采用von Mises准则在偏应力平面上构造边界面,以反向加载点和当前应力点的连线在边界面上投影的比例作为硬化参数,推导了塑性硬化模量并给出该边界面本构的具体增量表述。在有限元软件ADINA中通过自定义材料的二次开发实现了该本构模型,并利用动三轴试验对该本构模型进行了验证。数值模拟与试验结果的对比表明,本构模型能如实反映土体的应力-应变关系。针对实际工程场地的地震反应,应用边界面本构模型在ADINA中进行了二维数值模拟,与SHAKE91的计算结果进行了对比,说明了该本构模型应用于岩土地震工程问题的合理性。 相似文献
8.
This paper presents a finite element model for analysing the behaviour of granular material wrapped with polyethylene bags under vertical compression and cyclic shearing. The simple Mohr–Coulomb model is used to represent the soil behaviour. The polyethylene bag is represented by a linear-elastic–perfect-plastic model. The soil-bag interface is modelled with contact constraints. The main purpose of the numerical analysis is to validate the anticipated performance of soilbags under various loading conditions and hence the effectiveness of soilbags as a method of ground improvement. 相似文献
9.
桩-土相互作用问题是岩土工程桩基础问题的关键点与难点,目前针对桩身在循环温度荷载与上覆结构荷载双重作用下的能源桩承载特性研究较少。在传统理想弹塑性模型及双曲线模型的基础上,采用分段非线性的方法对桩-土荷载传递骨干曲线进行了修正,并基于Masing’s循环准则,提出了适用于能源桩的桩-土荷载传递模型。利用改进的桩-土荷载传递模型对能源桩承载特性进行数值分析,着重研究了桩-土荷载传递参数比R对能源桩受力情况的影响。此外,为了探究在上覆结构荷载及循环温度荷载双重作用下,能源桩与周围土体之间的真实荷载传递关系及其结构热力学特性,开展了针对能源桩与周围土体之间相互作用问题的室内模型试验,监测了其桩身轴向应力及侧摩阻力随温度及深度变化的趋势,并与基于改进荷载传递模型的数值计算结果进行了对比。室内模型试验监测及数值计算结果显示：能源桩在上覆结构荷载及温度循环荷载双重作用下,其受力行为受改进的桩-土荷载传递循环曲线控制;基于改进的桩-土荷载传递循环曲线而建立的数值模型计算结果与试验结果基本吻合,改进的桩-土荷载传递模型能够较好发地反映能源桩实际的承载特性。 相似文献
10.
Behavior of monopile foundations under cyclic lateral load 总被引：1，自引：0，他引：1
This paper describes the development and application of design charts for monopile foundations of offshore wind turbines in sandy soil under long-term cyclic lateral load. It outlines a numerical model, working with a numerical concept, which makes the calculation of accumulated displacements based on cyclic triaxial test results possible, and it describes important factors affecting the deformation response of a monopile to cyclic lateral loads. The effects of pile length, diameter and loading state on the accumulation rate of lateral deformation are presented and design charts are given, in which a normalized ultimate lateral resistance of a pile is used. For monopiles with very large diameter, the suitability of the “zero-toe-kick” and “vertical tangent” design critera for determining the required embedded length is discussed. 相似文献
11.
A new constitutive law for the behaviour of undrained sand subjected to dynamic loading is presented. The proposed model works for small and large strain ranges and incorporates contractive and dilative properties of the sand into the unified numerical scheme. These features allow to correctly predict liquefaction and cyclic mobility phenomena for different initial relative densities of the soil. The model has been calibrated as an element test, by using cyclic simple shear data reported in the literature. For the contractive sand behaviour a well‐known endochronic densification model has been used, whereas a plastic model with a new non‐associative flow rule is applied when the sand tends to dilate. Both dilatancy and flow rule are based on a new state parameter, associated to the stiffness degradation of the material as the shaking goes on. Also, the function that represents the rearrangement memory of the soil takes a zero value when the material dilates, in order to easily model the change in the internal structure. Proceeding along this kind of approach, liquefaction and cyclic mobility are modelled with the same constitutive law, within the framework of a bi‐dimensional FEM coupled algorithm developed in the paper. For calibration purposes, the behaviour of the soil in a cyclic simple shear test has been simulated, in order to estimate the influence of permeability, frequency of loading, and homogeneity of the shear stress field on the laboratory data. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
12.
Mazouz El Hadi Hamimed Messaoud Yahiaoui Abdelouahab Benzagouta Mohamed Said Khodja Mohamed Achi Nada Duplay Joëlle 《Arabian Journal of Geosciences》2020,13(9):1-11
The creep property of rock under cyclic loading is very important in civil engineering. In order to establish a novel constitutive equation for rock under cyclic loading, a fractional-order viscoplastic body under cyclic loading was constructed based on fractional-order viscous element. A fractional-order visco-elastoplastic model (FVEPM) for rock was established by connecting constructed fractional-order viscoplastic body with Burgers model. The model was a Burgers model when the maximum value of cyclic loading was less than the critical strength of rock; otherwise, it was a FVEPM which can be used to reflect the transient, steady-state, and tertiary creep phases of rock. The cyclic loading was decomposed into a static load and a cyclic loading with a zero average stress. According to rheological mechanics theory, the rheology constitutive equation of rock under the static load can be derived. According to viscoelastic mechanics theory, the constitutive equation under cyclic loading with a zero average stress was established by introducing the variation parameters of energy storage and energy dissipation compliance caused by rock damage and fracture. Finally, a new dynamic constitutive equation of rock cyclic loading can be obtained by superimposing the constitutive equation under static load and cyclic loading with a zero average stress. Compared with existing test results of rock under cyclic loading, the proposed constitutive model can be used to describe the creep characteristics of rock under cyclic loading and reflect the presented fluctuation of strain curve of rock under cyclic loading. 相似文献
13.
Numerical investigation of the stabilisation behaviour of shallow foundations under alternate loading 总被引：1，自引：1，他引：0
Hendrik Sturm 《Acta Geotechnica》2009,4(4):283-292
This article presents a stability criterion for shallow foundations on sand for various loading conditions. By means of laboratory
model tests, a behaviour called self-healing is shown. Numerical simulations of these tests prove the suitability of the employed numerical model. Based on this validation,
a numerical parametric study is done to analyse the influence of loading condition and initial state of the soil on the self-healing. Main focus is on the rotational behaviour and settlement of the foundation. The observations and numerical results are discussed
and an explanation is presented based on results of cyclic laboratory tests. 相似文献
14.
A sample of soil is subjected to multidimensional cyclic loading when two or three principal components of the stress or strain tensor are simultaneously controlled to perform a repetitive path. These paths are very useful to evaluate the performance of models simulating cyclic loading. In this article, an extension of an existing constitutive model is proposed to capture the behavior of the soil under this type of loading. The reference model is based on the intergranular strain anisotropy concept and therefore incorporates an elastic locus in terms of a strain amplitude. In order to evaluate the model performance, a modified triaxial apparatus able to perform multidimensional cyclic loading has been used to conduct some experiments with a fine sand. Simulations of the extended model with multidimensional loading paths are carefully analyzed. Considering that many cycles are simulated (\(N>30\)), some additional simulations have been performed to quantify and analyze the artificial accumulation generated by the (hypo-)elastic component of the model. At the end, a simple boundary value problem with a cyclic loading as boundary condition is simulated to analyze the model response. 相似文献
15.
This paper presents a relatively simple method for three‐dimensional liquefaction analysis of granular soil under offshore foundations. In this method, the Mohr–Coulomb model, which defines the elasto–plastic stress–strain relationship under monotonic loading, is modified to accommodate the plastic strains generated by cyclic loading. The effects of cyclic loading, evaluated from the results of laboratory tests on saturated samples of soil, are incorporated into the model. The method is implemented in an efficient finite element program for analyses of three‐dimensional consolidating soil. The practicability of the model is demonstrated by analysis of a typical offshore foundation, and the predictions of the numerical analysis are compared with the observed behaviour of the foundation. Copyright © 2000 John Wiley & Sons, Ltd. 相似文献
16.
Repetitive or cyclic rail loading deteriorates the engineering properties of the railway ballast by particle crushing and rearrangement. Most of the classical elasto-plastic models are unable to predict such ballast degradation despite successfully predicting the overall load–deformation behavior during cyclic densification. In this context, the present study delivers a novel hypo-plastic modeling approach coupled with breakage mechanics theory to bridge the gap of the conventional models. The hypo-plastic approach enables to predict the nonlinear load–deformation response of ballast-type granular materials for both monotonic and cyclic loading conditions, while circumventing the requirement of notional yield condition to predict the inelastic behavior. Breakage mechanics theory, on the other hand, establishes the links between particle comminution and the macroscopic deformation. The novelty of the proposed approach is threefold. Firstly, unlike the conventional hypo-plastic approaches, the development of the proposed model is within the continuum thermodynamics framework. Secondly, the model requires less number of physically identifiable parameters as compared to that of earlier models employed for assessing the particle breakage under cyclic loading. Third and finally, the numerical implementation of the model as a user-defined material is simple for solving boundary value problems. Under the compressive deformation regime, the model prediction of the ballast degradation along with the cyclic densification response agrees reasonably well with the experimental results found in the literature. 相似文献
17.
基于Hansob渗流理论和Merchant流变模型,将微分型流变方程耦合到一维固结理论中,建立了循环荷载作用下双变量表述的软黏土一维流变固结耦合方程组。采用FlexPDE软件对方程组进行了求解,通过与已有文献结果对比,验证了算法的可靠性,在该基础上研究了循环荷载作用下饱和软黏土的一维流变固结特性,分析了Hansob渗流参数、Merchant流变模型参数以及循环荷载类型对饱和软黏土固结特性的影响。研究结果表明,按超孔压定义的平均固结度 和按变形定义的平均固结度 均呈现循环变化特征,且 > ;当循环周次较大时, 进行稳定循环状态,由于流变效应, 峰值仍呈逐渐增大趋势;随着Hansob渗流参数 和 的逐渐增大,地基固结速率逐渐降低,同一循环周次内 、 的峰值也随之降低;随着流变参数F的逐渐增大,同一循环周次内 的峰值逐渐降低, 的峰值显著提高;随着 的逐渐增大,同一循环周次内 、 的峰值逐渐降低。循环荷载作用下地基的平均固结度始终处于循环状态,无法达到固结完成状态,其最大平均固结度也远小于线性荷载的情况。 相似文献
18.
为了研究盐岩在低频循环荷载作用下的蠕变特性,采用恒轴压、循环围压的应力加载方式对盐岩开展了低频循环荷载蠕变试验。试验结果显示,当蠕变时间较短时,盐岩轴向蠕变曲线近似为平滑曲线,波动性不大;当时间增加到一定程度以后,盐岩变形随围压变化而发生明显的波动。总体来看,循环荷载下盐岩轴向蠕变曲线与Burgers模型蠕变曲线较为相似。将Burgers模型分解为Maxwell模型和Kelvin模型,忽略材料的疲劳效应,分别推导了恒轴压、循环围压应力加载方式下Maxwell模型和Kelvin模型的轴向蠕变方程,分析了荷载循环周期对模型蠕变性的影响规律;将循环荷载下Maxwell模型和Kelvin模型的轴向蠕变方程进行叠加,得到了循环荷载下Burgers模型的轴向蠕变方程,并利用盐岩蠕变试验结果对其合理性进行了验证。结果表明:拟合曲线和试验曲线吻合良好,该模型能够较好地反映盐岩在循环荷载作用下的蠕变特性和荷载变化对盐岩蠕变性的重要影响,特别是能够反映出不同荷载循环周期下盐岩变形随荷载变化而发生的明显的波动现象。 相似文献
19.
Besides experimental investigations related to the strengthening effects of resins to natural stone, there have been hardly any numerical simulations conducted to the effects of the conservation on the mechanical behaviour of conserved objects. In the present study a three-dimensional finite element code MASA was used to investigate the influence of the conservation procedure on the mechanical properties of the natural stone. The finite element code is based on the microplane material model. As a localization limiter the crack band method was used. A typical profile of sandstone resembling parts of a sculpture—with scaling, sandy decay and sound zones was discretized by solid finite elements. Varied were material properties, temperature distribution over the depth of the specimen, cyclic effects due to the temperature variation and geometry of the specimen. Numerical results show that as a consequence of change of material properties after conservation procedure the cracks can be generated under environmental conditions that are most likely possible in practice. This is especially true for extreme temperature gradients, for repeated temperature conditions (cyclic loading) and for complex geometries. The numerical results have been partly verified by experiments. 相似文献
20.
Pile foundations are frequently subjected to cyclic lateral loads. Wave and wind loads on offshore structures will be applied in different directions and times during the design life of a structure. Therefore, the magnitude and direction of these loads in conjunction with the dead loads should be considered. This paper investigates a loading scenario where a monotonic lateral load is applied to a pile, followed by two‐way cycling in a direction perpendicular to the initial loading. This configuration is indicative of the complexity of loading that may be considered and is referred to in the paper as ‘T‐shaped’ loading. The energy‐based numerical model employed considers two‐dimensional lateral loading in an elasto‐plastic soil, with coupled behaviour between the two perpendicular directions by local yield surfaces along the length of the pile. The behaviour of the soil–pile system subjected to different loading combinations has been divided into four categories of shakedown previously proposed for cyclic loading of structures and soils. A design chart has been created to illustrate the type of pile behaviour for a given two‐dimensional loading scenario. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献