共查询到20条相似文献，搜索用时 63 毫秒
1.
西准噶尔萨吾尔地区Ⅰ型花岗岩同位素精确定年及其意义 总被引：5，自引：11，他引：5
西准噶尔萨吾尔地区地处新疆阿勒泰地区吉木乃县及塔城地区和丰县。区内酸性侵入岩较发育,森塔斯岩体中二长花岗岩锆石SHRIMP U-Pb年龄为328．2±5．7Ma(1σ),沃肯萨拉岩体中二长花岗岩锆石SHRIMP U-Pb年龄为323．8±6．2Ma(1σ),塔斯特岩体二长花岗岩全岩~(40)Ar/~(39)Ar年龄为313．6±3．2Ma(1σ),形成于早石炭世晚期。各岩体均具有Ⅰ型花岗岩特征,岩石偏碱性,Nd、Sr、Pb同位素显示出其幔源特征,具正常O同位素组成。森塔斯岩体、沃肯萨拉岩体和塔斯特岩体属于后碰撞花岗岩,其形成表明早石炭世晚期萨吾尔地区乃至西准噶尔地区已处于后碰撞构造环境,它们可能是后碰撞阶段挤压-伸展转变期的产物。森塔斯岩体、沃肯萨拉岩体和塔斯特岩体的岩石地球化学特征与准噶尔地区已知的Ⅰ型花岗岩(成岩年龄为300Ma左右)相似,但其发育显示准噶尔地区后碰撞Ⅰ型花岗岩的形成应始于早石炭世晚期。研究区早石炭世晚期后碰撞Ⅰ型花岗岩的确定为区域晚古生代地壳的垂向增生提供了新的证据。 相似文献
2.
新疆萨吾尔地区晚古生代岩浆作用的时限、地球化学特征及地球动力学背景 总被引：11，自引：9，他引：11
西准噶尔萨吾尔地区地处新疆阿勒泰地区吉木乃县及塔城地区和丰县。区内广泛发育晚古生代后碰撞岩浆岩，其中侵入岩年龄在328．2～290．7Ma之间，时代上属于晚石炭世至早二叠世，哈尔加乌组、卡拉岗组火山岩年龄在296．7～280Ma之间，为早二叠世火山活动产物。区内侵入岩由早到晚（森塔斯岩体、沃肯萨拉岩体→塔斯特岩体→喀尔交岩体→阔依塔斯岩体、恰其海岩体）具有明显的地球化学演化特征。哈尔加乌组火山岩具有弱双峰式特征，卡拉岗组火山岩具有典型的双峰式特征，均形成于拉张的构造背景。基于萨吾尔地区晚古生代岩浆岩的时间框架、地球化学演化特征及其形成的地球动力学背景，我们认为晚石炭世至早二叠世，萨吾尔地区处于后碰撞构造背景，并逐渐由挤压-拉张过渡阶段演化到拉张阶段。 相似文献
3.
新疆西准噶尔地区塔斯特岩体锆石LA-ICPMS年龄及其意义 总被引：3，自引：17，他引：3
西准噶尔萨吾尔地区地处新疆阿勒泰地区吉木乃县及塔城地区和丰县。酸性侵入岩在区内较发育,其研究对于准噶尔地区后碰撞构造-岩浆演化时限的厘定具有重要的意义。塔斯特岩体是萨吾尔地区重要的复式花岗岩体,与区内铜、金矿化关系密切。塔斯特岩体锆石 LA—ICPMS 年龄为337±4Ma(1σ),形成于早石炭世。结合已有的地球化学特征研究,这一年龄显示西准噶尔地区在早石炭世已处于后碰撞环境。本文获得的塔斯特岩体成岩年龄是目前在准噶尔地区获得的最老的后碰撞花岗岩锆石 U—Pb 年龄之一,为准噶尔地区后碰撞构造-岩浆演化时限的厘定提供了新的证据。 相似文献
4.
新疆西准噶尔恰其海后碰撞花岗岩 总被引：4，自引：1，他引：3
谭绿贵 《吉林大学学报(地球科学版)》2008,38(6):980-987
恰其海地区地处新疆阿勒泰地区吉木乃县及塔城地区的丰县,其岩体位于哈萨克斯坦—准噶尔板块北缘。岩性主要为肉红色中粗粒黑云母钾长花岗岩,其次为黑云母花岗岩;其岩石地球化学判别为A2型花岗岩,即侵位于板块主碰撞后或后碰撞期的张性构造环境中。恰其海碱长花岗岩锆石SHRIMPU-Pb年龄测定的结果为(290.7±9.3)Ma(1σ),为早二叠世后碰撞岩浆活动的产物,显示恰其海区域就此进入后碰撞阶段伸展构造环境。 相似文献
5.
新疆西准噶尔拉巴花岗岩地球化学特征及年代学研究 总被引：4，自引：0，他引：4
新疆西准噶尔玛依勒地区的拉巴岩体侵入于下石炭统包古图组中,由花岗闪长岩、石英闪长岩、英云闪长岩、花岗岩组成,以花岗岩为主。其中花岗岩和花岗闪长岩属钙碱性、高钾钙碱性系列,为偏铝质至过铝质岩石,并具有轻稀土-大离子亲石元素富集、Nb-Ta-Ti等高场强元素亏损的地球化学特征。该岩体两个代表样品的锆石La-ICP-MS法206Pb/238U加权平均年龄分别为287±5Ma和295.1±2.3Ma,表明岩体的结晶年龄为早二叠世,与西准噶尔地区后碰撞花岗岩的时代(年龄峰值310～295Ma)相近。综合岩体的地质、地球化学特征和区域地质特征,认为拉巴花岗岩体为准噶尔地区后碰撞阶段伸展期的岩浆活动产物。 相似文献
6.
西准噶尔北部萨吾尔地区晚古生代火山岩浆作用强烈,其形成构造环境一直是争议的焦点。塔斯特岩体作为区内最重要的复式岩体,主要由辉长岩、花岗闪长岩、二长花岗岩和钾长花岗岩组成,对其中的辉长岩进行LA-ICP-MS锆石U-Pb定年,206Pb/238U年龄加权平均值为345.3±2.3Ma(MSWD=1.8),说明塔斯特岩体形成于早石炭世中期。岩石地球化学特征显示,样品里特曼指数δ平均值为3.04,A/CNK(0.76~0.85)1.1,属于准铝质钙碱性岩石,岩石富集大离子亲石元素,而高场强元素和重稀土元素相对亏损,无明显的Eu异常,与西准噶尔地区后碰撞花岗岩类地球化学特征相似。综合研究认为,该辉长岩形成于后碰撞构造环境,可能是后碰撞阶段挤压-伸展转变期的产物。塔斯特辉长岩年龄是目前西准噶尔地区最老的后碰撞岩浆岩锆石年龄,表明西准噶尔地区在早石炭世中期已处于后碰撞构造环境,为西准噶尔地区后碰撞构造-岩浆演化下限的厘定提供了新的证据。 相似文献
7.
8.
《西北地质》2016,(2)
新疆西准噶尔北部萨吾尔山塔斯特岩体出露在吉木乃县托斯特乡西南,岩性主要为花岗闪长岩、二长花岗岩等,对其中的花岗闪长岩进行LA-ICP-MS锆石U-Pb定年,206Pb/238 U加权平均年龄为(332±1.9)Ma,表明该岩体形成于早石炭世晚期。岩石SiO_2(64.03%~66.44%),Na_2O/K_2O(1.887 8~2.488 5)、A/CNK(1.766 7~1.920 4)显示I型花岗岩特征。岩石富集大离子亲石元素(Rb、K),亏损高场强元素(Nb、Ti)。ΣREE(54.68×10~(-6)~57.56×10~(-6))、δEu(1.03~1.09)、(La/Sm)_N(3.173~3.54)表现出后碰撞花岗岩特点。指示早石炭世中期萨吾尔山地区乃至整个西准噶尔地区已处在后碰撞构造环境,早石炭世后碰撞花岗闪长岩的确定为西准噶尔晚古生代构造格局演化提供了新的证据。 相似文献
9.
西准噶尔谢米斯台花岗岩研究程度偏低, 运用锆石LA-ICP-MS U-Pb年代学、地球化学及锆石Lu-Hf同位素方法研究西准谢米斯台西段地区花岗岩, 结果表明: 谢米斯台岩体(427.6±2.3 Ma)和哈勒盖特希岩体(428.6±2.5 Ma)均形成于中志留世; 谢米斯台碱长花岗岩地球化学特征类似于Ⅰ型花岗岩, 哈勒盖特希碱长花岗岩地球化学特征类似于A型花岗岩; 锆石Hf同位素组成较均一, εHf(t)=12.4~14.5, 二阶段模式年龄tDM2变化范围在497~603 Ma之间, Ⅰ型花岗岩和A2型花岗岩可能形成于后碰撞阶段的挤压-伸展转变期, 是中志留世额尔齐斯-斋桑洋壳向南俯冲至波谢库尔-成吉斯火山弧底部, 俯冲板片与岛弧底部岩石圈之间剪切带的物质发生变形、变质及部分熔融作用, 使得由亏损地幔形成不久的年轻地壳(由洋壳和岛弧组成)发生部分熔融形成的长英质岩浆经进一步分离结晶作用形成分异Ⅰ型花岗岩和高温、缺水A2型花岗岩, A2型花岗岩较Ⅰ型花岗岩分离结晶程度高. 相似文献
10.
东准噶尔卡拉麦里蛇绿岩带南侧分布有大量的石炭纪侵入体,主要出露于五彩城、滴水泉一带及野马站地区。通过对卡拉麦里断裂以南侵入体岩石类型、锆石年代学、地球化学的综合分析,划分出早石炭世后碰撞I型花岗岩类及晚石炭世陆内双峰式侵入岩(碱长花岗岩+角闪辉长岩)。结合断裂以北黄羊山、老鸦泉岩体新近发表的数据及区域内火山岩的研究成果,对卡拉麦里地区石炭纪—二叠纪构造-岩浆演化过程给出了新认识,即卡拉麦里地区从后碰撞到陆内伸展的构造转换时间为早石炭世末期—晚石炭世早期,后碰撞阶段岩浆岩以钙碱性I型花岗岩、玄武安山岩、安山岩为特点,陆内伸展阶段以典型的双峰式岩浆岩(辉长岩+花岗岩、玄武岩+流纹岩)及A型花岗岩为特点,卡拉麦里地区具有正εNd值的花岗岩类来源于亏损地幔形成的年轻地壳的部分熔融。 相似文献
11.
S. Viswanathan K. Surya Prakash Rao B. Mahabaleswar 《Journal of the Geological Society of India》2013,82(6):621-627
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours. 相似文献
12.
E. M. Prasolov S. A. Sergeev B. V. Belyatsky E. S. Bogomolov K. A. Gruzdov I. N. Kapitonov R. Sh. Krymsky V. O. Khalenev 《Geochemistry International》2018,56(1):46-64
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others. 相似文献
13.
14.
奥地利安东帕有限公司 《岩矿测试》2009,28(3):306-306
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提 相似文献
15.
16.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance. 相似文献
17.
Alexander E. C. Broberg J. S. Kehren A. R. Graziani M. M. Turri W. L. 《Environmental Geology》1993,22(4):353-361
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes. 相似文献
18.
岩石密度和超高压岩石折返速率 总被引：1，自引：3，他引：1
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。 相似文献
19.
20.
Mercury,arsenic, antimony,and selenium contents of sediment from the Kuskokwim River,Bethel, Alaska,USA 总被引：1，自引：0，他引：1
The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources. 相似文献