首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Shelf‐edge deltas are a key depositional environment for accreting sediment onto shelf‐margin clinoforms. The Moruga Formation, part of the palaeo‐Orinoco shelf‐margin sedimentary prism of south‐east Trinidad, provides new insight into the incremental growth of a Pliocene, storm wave‐dominated shelf margin. Relatively little is known about the mechanisms of sand bypass from the shelf‐break area of margins, and in particular from storm wave‐dominated margins which are generally characterized by drifting of sand along strike until meeting a canyon or channel. The studied St. Hilaire Siltstone and Trinity Hill Sandstone succession is 260 m thick and demonstrates a continuous transition from gullied (with turbidites) uppermost slope upward to storm wave‐dominated delta front on the outermost shelf. The basal upper‐slope deposits are dominantly mass‐transport deposited blocks, as well as associated turbidites and debrites with common soft‐sediment‐deformed strata. The overlying uppermost slope succession exhibits a spectacular set of gullies, which are separated by abundant slump‐scar unconformities (tops of rotational slides), then filled with debris‐flow conglomerates and sandy turbidite beds with interbedded mudstones. The top of the study succession, on the outer‐shelf area, contains repeated upward‐coarsening, sandstone‐rich parasequences (2 to 15 m thick) with abundant hummocky and swaley cross‐stratification, clear evidence of storm‐swell and storm wave‐dominated conditions. The observations suggest reconstruction of the unstable shelf margin as follows: (i) the aggradational storm wave‐dominated, shelf‐edge delta front became unstable and collapsed down the slope; (ii) the excavated scars of the shelf margin became gullied, but gradually healed (aggraded) by repeated infilling by debris flows and turbidites, and then new gullying and further infilling; and (iii) a renewed storm wave‐dominated delta‐front prograded out across the healed outer shelf, re‐establishing the newly stabilized shelf margin. The Moruga Formation study, along with only a few others in the literature, confirms the sediment bypass ability of storm wave‐dominated reaches of shelf edges, despite river‐dominated deltas being, by far, the most efficient shelf‐edge regime for sediment bypass at the shelf break.  相似文献   

2.
Thin‐bedded delta‐front and prodelta facies of the Upper Cretaceous Ferron Notom Delta Complex near Hanksville in southern Utah, USA, show significant along‐strike facies variability. Primary initiation processes that form these thin beds include surge‐type turbidity currents, hyperpycnal flows and storm surges. The relative proportion of sedimentary structures generated by each of these depositional processes/events has been calculated from a series of measured sedimentological sections within a single parasequence (PS6–1) which is exposed continuously along depositional strike. For each measured section, sedimentological data including grain size, lithology, bedding thickness, sedimentary structures and ichnological suites have been documented. Parasequence 6–1 shows a strong along‐strike variation with a wave‐dominated environment in the north, passing abruptly into a fluvial‐dominated area, then to an environment with varying degrees of fluvial and wave influence southward, and back to a wave‐dominated environment further to the south‐east. The lateral facies variations integrated with palaeocurrent data indicate that parasequence 6–1 is deposited as a storm‐dominated symmetrical delta with a large river‐dominated bayhead system linked to an updip fluvial feeder valley. This article indicates that it is practical to quantify the relative importance of depositional processes and determine the along‐strike variation within an ancient delta system using thin‐bedded facies analysis. The wide range of vertical stratification and grading sequences present in these event beds also allows construction of conceptual models of deposition from turbidity currents (i.e. surge‐type turbidity currents and hyperpycnal flows) and storm surges, and shows that there are significant interactions and linkages of these often paired processes.  相似文献   

3.
The River Supersequence represents a 2nd‐order accommodation cycle of approximately 15 million years duration in the Isa Superbasin. The River Supersequence comprises eight 3rd‐order sequences that are well exposed on the central Lawn Hill Platform. They are intersected in drillholes and imaged by reflection seismic on the northern Lawn Hill Platform and crop out in the McArthur Basin of the Northern Territory. South of the Murphy Inlier the supersequence forms two south‐thickening depositional wedges on the Lawn Hill Platform. The northern wedge extends from the Murphy Inlier to the Elizabeth Creek Fault Zone and the southern wedge extends from Mt Caroline to the area south of Riversleigh Station. On the central Lawn Hill Platform the River Supersequence attains a maximum thickness of 3300 m. Facies are dominantly fine‐grained siliciclastics, but the lower part comprises a mixed carbonate‐siliciclastic succession. Interspersed within fine‐grained facies are sharp‐based sandstone and conglomeratic intervals interpreted as lowstand deposits. Such lowstand deposits represent a wide range of depositional systems and palaeoenvironments including fluvial channels, shallow‐marine shoreface settings, and deeper marine turbidites and sand‐rich submarine fans. Associated transgressive and highstand deposits comprise siltstone and shale deposited below storm wave‐base in relatively quiet, deep‐water settings similar to those found in a mid‐ to outer‐shelf setting. Seismic analysis shows significant fault offsets and thickness changes within the overall wedge geometry. Abrupt thickness changes across faults over small horizontal distances are documented at both the seismic‐ and outcrop‐scales. Synsedimentary fault movement, particularly along steeply north‐dipping, largely northeast‐trending normal faults, partitioned the depositional system into local sub‐basins. On the central Lawn Hill Platform, the nature of facies and their thickness change markedly within small fault blocks. Tilting and uplift of fault blocks affected accommodation cycles in these areas. Erosion and growth of fine‐grained parts of the section is localised within fault‐bounded depocentres. There are at least three stratigraphic levels within the River Supersequence associated with base‐metal mineralisation. Of the seven supersequences in the Isa Superbasin, the River Supersequence encompasses arguably the most dynamic period of basin partitioning, syndepositional faulting, facies change and associated Zn–Pb–Ag mineralisation.  相似文献   

4.
龚一鸣 《沉积学报》1993,11(2):75-83
新疆北部泥盆系火山碎屑浊积岩包括粗粒、中粒和细粒火山碎屑浊积岩三大类,后者尚可进一步划分为粉砂质、泥质和生物成因浊积岩。岩性上以含火山物质有别于陆屑、钙屑浊积岩。在火山碎屑浊积岩中识别出20种层序结构,它们可归并为完整鲍马序列、连续不完整鲍马序列和间断不完整鲍马序列三类。文章认为:间断不完整鲍马序列是多个浊流事件或浊流事件与其他事件相互叠加、干扰的产物,为活动构造环境,特别是火山岛弧海中非单源、单方向浊流沉积或火山碎屑浊积岩或细粒浊积岩的重要特征。  相似文献   

5.
The Lower Silurian siliciclastic Coralliferous Group is shown to have been deposited in an intra‐shelf position 10–15 km south of the palaeogeographic shelf‐break of the Welsh Basin. After a phase of thermal subsidence related to the development of the predominantly Llandovery Skomer Volcanic Group, the shelf basin was transgressed. This transgression was punctuated by an episode of tectonic uplift in southern Pembrokeshire, resulting in subaerial exposure of the shelf and a significant basinward shift in sedimentary environments. Erosion and sediment bypass ensued, with coarse‐grained low‐sinuosity fluvial channels transporting sediment to the northerly Welsh Basin, where significant submarine fans developed. During the early Telychian, renewed transgression took place, with lowstand gravels being ravined and reworked into parasequences of the transgressive systems tract. These thin, coarse‐grained parasequences record deposition within high‐energy wave‐dominated shoreface/inner shelf environments. Further coastal onlap resulted in the closing down of significant coarse‐grained sediment supply, with the remaining Coralliferous Group being dominated by wave‐influenced silts, mud‐shales and thin sandstones comprising the highstand systems tract. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

6.
The Upper Cretaceous Prairie Canyon Member of the Mancos Shale, Book Cliffs, Utah, contain outstanding examples of prodeltaic turbidity and hyperpycnal flow deposits. Sandstone‐rich, heterolithic and mudstone‐rich channel fills occur near the north‐west entrance to Tusher Canyon, Gunnison Butte and Bootlegger Wash. Mudstone‐rich and heterolithic‐rich hyperpycnal channel deposits are mostly unbioturbated, locally displaying a few specimens of Phycosiphon incertum, Protovirgularia dichotoma, Rosselia socialis, Schaubcylindrichnus coronus and Palaeophycus tubularis. Sandstone‐rich channel deposits consist of wave‐reworked turbidites and hyperpycnites, containing Helminthoidichnites tenuis, Lockeia siliquaria, Phycodes isp., Phycosiphon incertum, Protovirgularia dichotoma, Rosselia socialis, Skolithos linearis and Fugichnia. Scolicia isp. and Chondrites isp. occur locally. Strata along the south‐west entrance of Tusher Canyon record deposition in a prodelta turbidite lobe, but far from its axis. With the exception of a few specimens of Ophiomorpha isp., bioturbation is restricted to the top of the succession, where Curvolithus simplex, Gyrochorte comosa, Lockeia siliquaria, Palaeophycus tubularis and Ptychoplasma excelsum occur. Strata at Hatch Mesa record deposition in a hyperpycnal lobe, near to its axis. Sandstone beds include Curvolithus simplex, Gyrochorte comosa, Ophiomorpha nodosa, Palaeophycus tubularis, Phycosiphon incertum, Protovirgularia dichotoma, Ptychoplasma excelsum, Schaubcylindrichnus freyi, Skolithos linearis, large specimens of Rosselia socialis and indeterminate crustacean burrows. Chondrites isp. is present in the mudstone. High rates of both episodic and sustained sedimentation, degree of substrate consolidation, freshwater discharge and water turbidity are the most important stress factors in both channels and lobes. Taxonomic composition, uneven distribution of bioturbation through the successions, and overall low ichnodiversity help to distinguish these prodeltaic deposits from bathymetrically equivalent offshore strata in the same basin. Hyperpycnal flow deposits are formed in a wide variety of environmental settings, therefore displaying high ichnological variability. Such variability is summarized by characterising ichnofaunas from four different depositional settings: (i) lakes; (ii) shelf deltas; (iii) shelf‐edge deltas; and (iv) deep‐marine systems.  相似文献   

7.
The Upper Cretaceous (Campanian) Kenilworth Member of the Blackhawk Formation (Mesaverde Group) is part of a series of strand plain sandstones that intertongue with and overstep the shelfal shales of the western interior basin of North America. Analysis of this section at a combination of small (sedimentological) and large (stratigraphical) scales reveals the dynamics of progradation of a shelf-slope sequence into a subsiding foreland basin. Four major lithofacies are present in the upper Mancos and Kenilworth beds of the Book Cliffs. A lag sandstone and channel-fill shale lithofacies constitutes the thin, basal, transgressive sequence, which rests on a marine erosion surface. It was deposited in an outer shelf environment. Shale, interbedded sandstone and shale, and amalgamated sandstone lithofacies were deposited over the transgressive lag sandstone lithofacies as a wave-dominated delta and its flanking strand plains prograded seaward. Analysis of grain size and primary structures in Kenilworth beds indicates that there are four basic strata types which combine to build the observed lithofacies. The fine- to very fine-grained graded strata of the interbedded facies are tempestites, deposited out of suspension by alongshelf storm flows (geostrophic flows). There is no need to call on cross-shelf turbidity currents (density underflows) to explain their presence. Very fine- to fine-grained hummocky strata are likewise suspension deposits created by waning storm flows, but were deposited under conditions of more intense wave agitation on the middle shoreface. Cross-strata sets in this region are bed-load deposits that accumulated on the upper shore-face, in the surf zone. Lag strata are multi-event, bed-load deposits that are the product of prolonged storm winnowing. They occur on transgressive surfaces. While the graded beds are tempestites in the strict sense, all four classes of strata are storm deposits. The distribution of strata types and their palaeocurrent orientations suggests a model of the Kenilworth transport system driven by downwelling coastal storm flows, and probably by a northeasterly alongshore pressure gradient. The stratification patterns shift systematically from upper shoreface to lower shoreface and inner shelf lithofacies partly because of a reduction in fluid power expenditure with increasing water depth, but also because of progressive sorting, which resulted in a decrease in grain size in the sediment load delivered to successive downstream environments. The Kenilworth Member and an isolated outlier, the Hatch Mesa lentil, constitute a delta-prodelta shelf depositional system. Their rhythmically bedded, lenticular, sandstone and shale successions are a prodelta shelf facies, and may be prodelta plume deposits. Major Upper Cretaceous sandstone tongues in the Book Cliffs are underlain by erosional surfaces like that beneath the Blackhawk Formation, which extend for many tens of kilometres into the Mancos shale. These surfaces are the boundaries of Upper Cretaceous depositional sequences. The sequences are large-scale genetic stratigraphic units. They result from the arranging of facies into depositional systems; the depositional systems are in turn stacked in repeating arrays, which constitute the depositional sequences. The anatomy of these foreland basin sequences differs  相似文献   

8.
Integrated ichnological and sedimentological analyses of core samples from the Upper Jurassic Ula Formation in the Norwegian Central Graben were undertaken to quantify the influence of storm waves on sedimentation. Two main facies associations (offshore and shoreface) that form a progradational coarsening upward succession are recognizable within the cores. The offshore deposits are characterized by massive to finely laminated mudstones and fine‐grained sandstones, within a moderately to highly bioturbated complex. The trace fossil assemblage is dominated by deposit‐feeding structures (for example, Planolites, Phycosiphon and Rosselia) and constitutes an expression of the proximal Zoophycos to distal Cruziana ichnofacies. The absence of grazing behaviours and dominance of deposit‐feeding ichnofossils is a reflection of the increased wave energies present (i.e. storm‐generated currents) within an offshore setting. The shoreface succession is represented by highly bioturbated fine‐grained to medium‐grained sandstones, with intervals of planar and trough cross‐bedding, thin pebble lags and bivalve‐rich shell layers. The ichnofossil assemblage, forming part of the Skolithos ichnofacies, is dominated by higher energy Ophiomorpha nodosa ichnofossils and lower energy Ophiomorpha irregulaire and Siphonichnus ichnofossils. The presence of sporadic wave‐generated sedimentary structures and variability in ichnofossil diversity and abundance attests to the influence of storm‐generated currents during deposition. As a whole, the Ula Formation strongly reflects the influence of storm deposits on sediment deposition; consequently, storm‐influenced shoreface most accurately describes these depositional environments.  相似文献   

9.
Although modern wave‐dominated shorelines exhibit complex geomorphologies, their ancient counterparts are typically described in terms of shoreface‐shelf parasequences with a simple internal architecture. This discrepancy can lead to poor discrimination between, and incorrect identification of, different types of wave‐dominated shoreline in the stratigraphic record. Documented in this paper are the variability in facies characteristics, high‐resolution stratigraphic architecture and interpreted palaeo‐geomorphology within a single parasequence that is interpreted to record the advance of an ancient asymmetrical wave‐dominated delta. The Standardville (Ab1) parasequence of the Aberdeen Member, Blackhawk Formation is exposed in the Book Cliffs of central Utah, USA. This parasequence, and four others in the Aberdeen Member, record the eastward progradation of north/south‐trending, wave‐dominated shorelines. Within the Standardville (Ab1) parasequence, distal wave‐dominated shoreface‐shelf deposits in the eastern part of the study area are overlain across a downlap surface by southward prograding fluvial‐dominated delta‐front deposits, which have previously been assigned to a separate ‘stranded lowstand parasequence’ formed by a significant, allogenic change in relative sea‐level. High‐resolution stratigraphic analysis of these deposits reveals that they are instead more likely to record a single episode of shoreline progradation characterized by alternating periods of normal regressive and forced regressive shoreline trajectory because of minor cyclical fluctuations in relative sea‐level. Interpreted normal regressive shoreline trajectories within the wave‐dominated shoreface‐shelf deposits are marked by aggradational stacking of bedsets bounded by non‐depositional discontinuity surfaces. Interpreted forced regressive shoreline trajectories in the same deposits are characterized by shallow incision of fluvial distributary channels and strongly progradational stacking of bedsets bounded by erosional discontinuity surfaces that record enhanced wave‐base scour. Fluvial‐dominated delta‐front deposits most probably record the regression of a lobate delta parallel to the regional shoreline into an embayment that was sheltered from wave influence. Wave‐dominated shoreface‐shelf and fluvial‐dominated delta‐front deposits occur within the same parasequence, and their interpretation as the respective updrift and downdrift flanks of a single asymmetrical wave‐dominated delta that periodically shifted its position provides the most straightforward explanation of the distribution and relative orientation of these two deposit types.  相似文献   

10.
The development of mudwaves on the levees of the modern Toyama deep‐sea channel has been studied using gravity core samples combined with 3·5‐kHz echosounder data and airgun seismic reflection profiles. The mudwaves have developed on the overbank flanks of a clockwise bend of the channel in the Yamato Basin, Japan Sea, and the mudwave field covers an area of 4000 km2. Mudwave lengths range from 0·2 to 3·6 km and heights vary from 2 to 44 m, and the pattern of mudwave aggradation indicates an upslope migration direction. Sediment cores show that the mudwaves consist of an alternation of fine‐grained turbidites and hemipelagites whereas contourites are absent. Core samples demonstrate that the sedimentation rate ranged from 10 to 14 cm ka?1 on the lee sides to 17–40 cm ka?1 on the stoss sides. A layer‐by‐layer correlation of the deposits across the mudwaves shows that the individual turbidite beds are up to 20 times thicker on the stoss side than on the lee side, whereas hemipelagite thicknesses are uniform. This differential accretion of turbidites is thought to have resulted in the pattern of upcurrent climbing mudwave crests, which supports the notion that the mudwaves have been formed by spillover turbidity currents. The mudwaves are interpreted to have been instigated by pre‐existing large sand dunes that are up to 30 m thick and were created by high‐velocity (10°ms?1), thick (c. 500 m) turbidity currents spilling over the channel banks at the time of the maximum uplift of the Northern Japan Alps during the latest Pliocene to Early Pleistocene. Draping of the dunes by the subsequent, lower‐velocity (10?1ms?1), mud‐laden turbidity currents is thought to have resulted in the formation of the accretionary mudwaves and the pattern of upflow climbing. The dune stoss slopes are argued to have acted as obstacles to the flow, causing localized loss of flow strength and leading to differential draping by the muddy turbidites, with greater accretion occurring on the stoss side than on the lee slope. The two overbank flanks of the clockwise channel bend show some interesting differences in mudwave development. The mudwaves have a mean height of 9·8 m on the outer‐bank levee and 6·2 m on the inner bank. The turbidites accreted on the stoss sides of the mudwaves are 4–6 times thicker on the outer‐bank levee than their counterparts on the inner‐bank levee. These differences are attributed to the greater flow volume (thickness) and sediment flux of the outer‐bank spillover flow due to the more intense stripping of the turbidity currents at the outer bank of the channel bend. Differential development of mudwave fields may therefore be a useful indicator in the reconstruction of deep‐sea channels and their flow hydraulics.  相似文献   

11.
Abstract Although shelf‐edge deltas are well‐imaged seismic features of Holocene and Pleistocene shelf margins, documented outcrop analogues of these important sand‐prone reservoirs are rare. The facies and stratigraphic architecture of an outcropping shelf‐edge delta system in the Eocene Battfjellet Formation, Spitsbergen, is presented here, as well as the implications of this delta system for the generation of sand‐prone, shelf‐margin clinoforms. The shelf‐edge deltas of the Battfjellet Formation on Litledalsfjellet and Høgsnyta produced a 3–5 × 15 km, shelf edge‐attached, slope apron (70 m of sandstones proximally, tapering to zero on the lower slope). The slope apron consists of distributary channel and mouth‐bar deposits in its shelf‐edge reaches, passing downslope to slope channels/chutes that fed turbiditic lobes and spillover sheets. In the transgressive phase of the slope apron, estuaries developed at the shelf edge, and these also produced minor lobes on the slope. The short‐headed mountainous rivers that drained the adjacent orogenic belt and fed the narrow shelf, and the shelf‐edge position of the discharging deltas, made an appropriate setting for the generation of hyperpycnal turbidity currents on the slope of the shelf margin. The abundance of organic matter and of coal fragments in the slope turbidites is consistent with this notion. Evidence that many of the slope turbidites were generated by sustained turbidity currents that waxed then waned includes the presence of scour surfaces and thick intervals of plane‐parallel laminae within turbidite beds in the slope channels, and thick spillover lobes with repetitive alternations of massive and flat‐laminated intervals. The examined shelf‐edge to slope system, now preserved mainly below the shelf break and dominated by sediment gravity‐flow deposits, has a threefold stratigraphic architecture: a lower, progradational part, in which the clinoforms have a slight downward‐directed trajectory; a thin aggradational zone; and an upper part in which clinoforms backstep up onto the shelf edge. A greatly increased density of erosional channels and chutes marks the regressive‐to‐transgressive turnaround within the slope apron, and this zone becomes an angular unconformity up near the shelf edge. This unconformity, with both subaerial and subaqueous components, is interpreted as a sequence boundary and developed by vigorous sand delivery and bypass across the shelf edge during the time interval of falling relative sea level. The studied shelf‐margin clinoforms accreted mostly during falling stage (sea level below the shelf edge), but the outer shelf later became estuarine as sea level became re‐established above the shelf edge.  相似文献   

12.
ABSTRACT The Moroccan Turbidite System (MTS) on the north‐west African margin extends 1500 km from the head of the Agadir Canyon to the Madeira Abyssal Plain, making it one of the longest turbidite systems in the world. The MTS consists of three interconnected deep‐water basins, the Seine Abyssal Plain (SAP), the Agadir Basin and the Madeira Abyssal Plain (MAP), connected by a network of distributary channels. Excellent core control has enabled individual turbidites to be correlated between all three basins, giving a detailed insight into the turbidite depositional architecture of a system with multiple source areas and complex morphology. Large‐volume (> 100 km3) turbidites, sourced from the Morocco Shelf, show a relatively simple architecture in the Madeira and Seine Abyssal Plains. Sandy bases form distinct lobes or wedges that thin rapidly away from the basin margin and are overlain by ponded basin‐wide muds. However, in the Agadir Basin, the turbidite fill is more complex owing to a combination of multiple source areas and large variations in turbidite volume. A single, very large turbidity current (200–300 km3 of sediment) deposited most of its sandy load within the Agadir Basin, but still had sufficient energy to carry most of the mud fraction 500 km further downslope to the MAP. Large turbidity currents (100–150 km3 of sediment) deposit most of their sand and mud fraction within the Agadir Basin, but also transport some of their load westwards to the MAP. Small turbidity currents (< 35 km3 of sediment) are wholly confined within the Agadir Basin, and their deposits pinch out on the basin floor. Turbidity currents flowing beyond the Agadir Basin pass through a large distributary channel system. Individual turbidites correlated across this channel system show major variations in the mineralogy of the sand fraction, whereas the geochemistry and micropalaeontology of the mud fraction remain very similar. This is interpreted as evidence for separation of the flow, with a sand‐rich, erosive, basal layer confined within the channel system, overlain by an unconfined layer of suspended mud. Large‐volume turbidites within the MTS were deposited at oxygen isotope stage boundaries, during periods of rapid sea‐level change and do not appear to be specifically connected to sea‐level lowstands or highstands. This contrasts with the classic fan model, which suggests that most turbidites are deposited during lowstands of sea level. In addition, the three largest turbidites on the MAP were deposited during the largest fluctuations in sea level, suggesting a link between the volume of sediment input and the magnitude of sea‐level change.  相似文献   

13.
Turbidity currents in the ocean are driven by suspended sediment. Yet results from surveys of the modern sea floor and turbidite outcrops indicate that they are capable of transporting as bedload and depositing particles as coarse as cobble sizes. While bedload cannot drive turbidity currents, it can strongly influence the nature of the deposits they emplace. This paper reports on the first set of experiments which focus on bedload transport of granular material by density underflows. These underflows include saline density flows, hybrid saline/turbidity currents and a pure turbidity current. The use of dissolved salt is a surrogate for suspended mud which is so fine that it does not settle out readily. Thus, all the currents can be considered to be model turbidity currents. The data cover four bed conditions: plane bed, dunes, upstream‐migrating antidunes and downstream‐migrating antidunes. The bedload transport relation obtained from the data is very similar to those obtained for open‐channel flows and, in fact, is fitted well by an existing relation determined for open‐channel flows. In the case of dunes and downstream‐migrating antidunes, for which flow separation on the lee sides was observed, form drag falls in a range that is similar to that due to dunes in sand‐bed rivers. This form drag can be removed from the total bed shear stress using an existing relation developed for rivers. Once this form drag is subtracted, the bedload data for these cases collapse to follow the same relation as for plane beds and upstream‐migrating antidunes, for which no flow separation was observed. A relation for flow resistance developed for open‐channel flows agrees well with the data when adapted to density underflows. Comparison of the data with a regime diagram for field‐scale sand‐bed rivers at bankfull flow and field‐scale measurements of turbidity currents at Monterey Submarine Canyon, together with Shields number and densimetric Froude number similarity analyses, provide strong evidence that the experimental relations apply at field scale as well.  相似文献   

14.
This study investigates the morphology and Late Quaternary sediment distribution of the Makran turbidite system (Makran subduction zone, north‐west Indian Ocean) from a nearly complete subsurface mapping of the Oman basin, two‐dimensional seismic and a large set of coring data in order to characterize turbidite system architecture across an active (fold and thrust belt) margin. The Makran turbidite system is composed of a dense network of canyons, which cut into high relief accreted ridges and intra‐slope piggyback basins, forming at some locations connected and variably tortuous paths down complex slopes. Turbidite activity and trench filling rates are high even during the Holocene sea‐level highstand conditions. In particular, basin‐wide, sheet‐like thick mud turbidites, probably related to major mass wasting events of low recurrence time, drape the flat and unchannellized Oman abyssal plain. Longitudinal depth profiles show that the Makran canyons are highly disrupted by numerous thrust‐related large‐scale knickpoints (with gradients up to 20° and walls up to 500 m high). At the deformation front, the strong break of slope can lead to the formation of canyon‐mouth ‘plunge pools’ of variable shapes and sizes. The plunge pools observed in the western Makran are considerably larger than those previously described in sub‐surface successions; the first insights into their internal architecture and sedimentary processes are presented here. Large plunge pools in the western Makran are associated with large scoured areas at the slope break and enhanced sediment deposition downstream: high‐amplitude reflectors are observed inside the plunge pools, while their flanks are composed of thin‐bedded, fine‐grained turbidites deposited by the uppermost part of the turbidity flows. Thus, these architectural elements are associated with strong sediment segregation leading to specific trench‐fill mechanisms, as only the finer‐grained component of the flows is transferred to the abyssal plain. However, the Makran accretionary prism is characterized by strong along‐strike variability in tectonics and fluvial input distribution that might directly influence the turbidite system architecture (i.e. canyon entrenchment, plunge pool formation or channel development at canyon mouths), the sedimentary dynamics and the resulting sediment distribution. Channel formation in the abyssal plain and trench‐fill characteristics depend on the theoretical ‘equilibrium’ conditions of the feeder system, which is related closely to the balance between erosion rates and tectonic regime. Thus, the Makran turbidite system constitutes an excellent modern analogue for deep‐water sedimentary systems with structurally complex depocentres, in convergent margin settings.  相似文献   

15.
The Upper Cretaceous Cerro Toro Formation in the Silla Syncline, Parque Nacional Torres del Paine, Magallanes Basin, Chile, includes over 1100 m of mainly thin‐bedded mud‐rich turbidites containing three thick divisions of coarse conglomerate and sandstone. Facies distributions, stacking patterns and lateral relationships indicate that the coarse‐grained sandstone and conglomerate units represent the fill of a series of large south to south‐east trending deep‐water channels or channel complexes. The middle coarse division, informally named the Paine member, represents the fill of at least three discrete channels or channel complexes, termed Paine A, B and C. The uppermost of these, Paine C, represents a channel belt about 3·5 km wide and its fill displays explicit details of channel geometry, channel margins, and the processes of channel development and evolution. Along its northern margin, Paine C consists of stacked, laterally offset channels, each eroded into fine‐grained mudstone and thin‐bedded sandy turbidites. Along its southern margin, the Paine C complex was bounded by a single, deeply incised but stepped erosional surface. The evolution of the Paine C channel occurred through multiple cycles of activity, each involving: (i) an initial period of channel erosion into underlying fine‐grained sediments; (ii) deposition of coarse‐grained pebble to cobble conglomerate and sandstone within the channel; and (iii) waning of coarse sediment deposition and accumulation of a widespread sheet of fine‐grained, thin‐bedded turbidites inside and outside the channel. The thin‐bedded turbidites deposited within, and adjacent to, the channel along the northern margin of the Paine C complex do not appear to represent levée deposits but, rather, a separate fine‐grained turbidite system that impinged on the Paine C channel from the north. The Cerro Toro channel complex in the Silla Syncline may mark either an early axial zone of the Magallanes Basin or a local slope mini‐basin developed behind a zone of slope faulting and folding now present immediately east of the syncline. If the latter, flows moving downslope toward the basin axis further east were diverted to the south by this developing structural high, deposited part of their coarse sediment loads, and exited the mini‐basin at a point located near the south‐eastern edge of the present Silla Syncline.  相似文献   

16.
The dominance of isotropic hummocky cross‐stratification, recording deposition solely by oscillatory flows, in many ancient storm‐dominated shoreface–shelf successions is enigmatic. Based on conventional sedimentological investigations, this study shows that storm deposits in three different and stratigraphically separated siliciclastic sediment wedges within the Lower Cretaceous succession in Svalbard record various depositional processes and principally contrasting sequence stratigraphic architectures. The lower wedge is characterized by low, but comparatively steeper, depositional dips than the middle and upper wedges, and records a change from storm‐dominated offshore transition – lower shoreface to storm‐dominated prodelta – distal delta front deposits. The occurrence of anisotropic hummocky cross‐stratification sandstone beds, scour‐and‐fill features of possible hyperpycnal‐flow origin, and wave‐modified turbidites within this part of the wedge suggests that the proximity to a fluvio‐deltaic system influenced the observed storm‐bed variability. The mudstone‐dominated part of the lower wedge records offshore shelf deposition below storm‐wave base. In the middle wedge, scours, gutter casts and anisotropic hummocky cross‐stratified storm beds occur in inferred distal settings in association with bathymetric steps situated across the platform break of retrogradationally stacked parasequences. These steps gave rise to localized, steeper‐gradient depositional dips which promoted the generation of basinward‐directed flows that occasionally scoured into the underlying seafloor. Storm‐wave and tidal current interaction promoted the development and migration of large‐scale, compound bedforms and smaller‐scale hummocky bedforms preserved as anisotropic hummocky cross‐stratification. The upper wedge consists of thick, seaward‐stepping successions of isotropic hummocky cross‐stratification‐bearing sandstone beds attributed to progradation across a shallow, gently dipping ramp‐type shelf. The associated distal facies are characterized by abundant lenticular, wave ripple cross‐laminated sandstone, suggesting that the basin floor was predominantly positioned above, but near, storm‐wave base. Consequently, shelf morphology and physiography, and the nature of the feeder system (for example, proximity to deltaic systems) are inferred to exert some control on storm‐bed variability and the resulting stratigraphic architecture.  相似文献   

17.
Deep‐water sandstone beds of the Oligocene Fusaru Sandstone and Lower Dysodilic Shale, exposed in the Buz?u Valley area of the East Carpathian flysch belt, Romania, can be described in terms of the standard turbidite divisions. In addition, mud‐rich sand layers are common, both as parts of otherwise ‘normal’ sequences of turbidite divisions and as individual event beds. Eleven units, interpreted as the deposits of individual flows, were densely sampled, and 87 thin sections were point counted for grain size and mud content. S3/Ta divisions, which form the bulk of most sedimentation units, have low internal textural variability but show subtle vertical trends in grain size. Most commonly, coarse‐tail normal grading is associated with fine‐tail inverse grading. The mean grain size can show inverse grading, normal grading or a lack of grading, but sorting tends to improve upward in most beds. Fine‐tail inverse grading is interpreted as resulting from a decreasing effectiveness of trapping of fines during rapid deposition from a turbidity current as the initially high suspended‐load fallout rate declines. If this effect is strong enough, the mean grain size can show subtle inverse grading as well. Thus, thick inversely graded intervals in deep‐water sands lacking traction structures do not necessarily imply waxing flow velocities. If the suspended‐load fallout rate drops to zero after the deposition of the coarse grain‐size populations, the remaining finer grained flow bypasses and may rework the top of the S3 division, forming well‐sorted, coarser grained, current‐structured Tt units. Alternatively, the suspended‐load fallout rate may remain high enough to prevent segregation of fines, leading to the deposition of significant amounts of mud along with the sand. Mud content of the sandstones is bimodal: either 3–13% or more than 20%. Two types of mud‐rich sandstones were observed. Coarser grained mud‐rich sandstones occur towards the upper parts of S3/Ta divisions. These units were deposited as a result of enhanced trapping of mud particles in the rapidly deposited sediment. Finer grained mud‐rich units are interbedded with ripple‐laminated very fine‐grained sandy Tc divisions. During deposition of these units, mud floccules were hydraulically equivalent to the very fine sand‐ and silt‐sized sediment. The mud‐rich sandstones were probably deposited by flows that became transitional between turbidity currents and debris flows during their late‐stage evolution.  相似文献   

18.
济阳坳陷牛庄洼陷沙三段三角洲前缘浊积岩特征   总被引：13，自引：0，他引：13  
根据地质、测井、地震资料的综合分析,对济阳坳陷牛庄洼陷沙河街组三段三角洲前缘的浊积岩特征进行了研究。结果表明,该区存在砂质浊积岩体和细粒浊积岩体两种浊流沉积物。其中砂质浊积岩体粒度较细、结构成熟度和成分成熟度较低,结构和构造均反映了砂体具有滑塌再沉积的特点,可用Bouma序列来描述,常发育CDE,BCD,ABCD型浊流组合。砂质浊积岩体可进一步划为有根式和无根式两类。有根式砂体常呈扇形,可分为内扇槽道、中扇辫状水道、水道间、水道前缘和外扇无水道五种微相;无根式砂体常呈片状、舌状,可分为中心微相和边缘微相两个相带。细粒浊积岩属于低密度流的产物,不能用Bouma序列来解释,主要发育递变纹层泥岩和不均匀的块状泥岩两种细粒浊积岩。根据两类沉积物的沉积特征,建立了该区三角洲一浊积岩体综合沉积模式。论述了三角洲前缘浊积岩的成因及石油地质意义。  相似文献   

19.
《Sedimentology》2018,65(5):1413-1446
Turbidites within Holocene lacustrine sediment cores occur worldwide and are valued deposits that record a history of earthquakes or storms. Without sedimentary architecture, however, interpretation of the cause, provenance and behaviour of their parent turbidity currents are speculative. Here, these interpretations are made from two‐dimensional ground‐penetrating radar images of ‘shore to shore’ architecture beneath three, previously cored lakes within the low seismicity New England (USA ) region. Shallow depths, low water and sediment conductivities, and signal sensitivity to density contrasts uniquely provided up to 30 m of sediment signal penetration. Core comparisons and signal analysis reveal that most horizons represent multidecimetre‐thick clusters of Holocene turbidites, which are denser than their organic‐rich silt matrix. Some horizons also represent erosional unconformities and sediment bypass interfaces. The key, common, architectural consequences of turbidity current activity include limited foreset progradation, conformably pinched or unconformable layers of organic‐rich sediment onlapped against slopes beneath 5 to 6 m of water, and mounded stratified sediments beneath rises. These features indicate that turbidity currents repeatedly bypassed the same slope without deposition and regardless of dip, and then simultaneously armoured and bypassed inter‐turbidite sediment along rises and basins to provide basinward, generally age‐conformable accumulation. The mounding precludes significant basinward focusing. Variable horizon amplitude suggests metre‐scale changes in armouring density. Unconformities localized near breaks in dip beneath slopes suggest erosive hydraulic jumps. One lake shows evidence of historically maintained channels associated with specific deltas. Shelf strata indicating inland current generation, similar key architecture in other, uncored lakes, countable, lake‐wide horizons, and absent slumps, slides and faults are consistent with storm‐driven turbidity currents, and with previous, core‐based conclusions that severe, Holocene storms were episodic throughout this region. The results generalize marine bypass and armouring to lacustrine settings, and so probably occur worldwide in lakes subject only to storms, including lakes where ground‐penetrating radar may locate core sites.  相似文献   

20.
The study of new seismic data permits the identification of sediment gravity flows in terms of internal architecture and the distribution on shelf and abyssal setting in the Qiongdongnan Basin (QDNB). Six gravity flow types are recognized: (1) turbidite channels with a truncational basal and concordant overburden relationship along the shelf edge and slope, comprising laterally-shifting and vertically-aggrading channel complexes; (2) slides with a spoon-shaped morphology slip steps on the shelf-break and generated from the deformation of poorly-consolidated and high water content sediments; (3) slumps are limited on the shelf slope, triggered either by an anomalous slope gradient or by fault activity; (4) turbidite sheet complexes (TSC) were ascribed to the basin-floor fan and slope fan origin, occasionally feeding the deep marine deposits by turbidity currents; (5) sediment waves occurring in the lower slope-basin floor, and covering an area of approximately 400?km2, were generated beneath currents flowing across the sea bed; and (6) the central canyon in the deep water area represents an exceptive type of gravity flow composed of an association of debris flow, turbidite channels, and TSC. It presents planar multisegment and vertical multiphase characteristics. Turbidite associated with good petrophysical property in the canyon could be treated as a potential exploration target in the QDNB.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号